Animated zoom in CS5 - any reason for it?

in CS5 the zoom function is much different than CS3 - very distracting. i have the animated zoom checked off but open GL on basic with anti-alias paths off so i can see the pen tool. Is there any reason for this new zoom? i dont see the point and its just annoying - not trying to be a complainer but just wondering why its there. Thanks.

not sure what you mean by interactivly but when i zoom by command + and - it gives me this jerky zoom action. not smooth to me. is this necessary b/c of open GL? i would turn it off b/c i dont use flick panning etc but i need to see my paths

Similar Messages

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in

Hi, I've been playing Smurf's village for a year now and just last week, i tried to get into the app but it keeps rejecting and goes back to the main page. Is there any reason for this? I've been updating the app everytime and now it's not letting me in. Pls advise. Tq

Reset the device, restart the device, try downloading any other app.
All of these are basic steps that could have been found by a simple search of the forums as a resolution for the issue.

Play count question. I have about 500 songs in my library that I know have played at least once...probably just once. Although there is a "last played" date listed there is no number in the play count column. Any reason for this? thx

I have about 500 songs in my library that have played one time. Although a "last date played" date is noted, there is no number in the play count column. This only happens some times. Any reason for this, and can it be corrected? thx

Thanks, but the play count is not incrementing only on the very first play. All subsequent plays are fine. Meaning the play counts for these particular tracks are always one play short. I double-checked some of the tracks in question and I have not shortened, or stopped them early.

HT1386 i can't sync some selected movies i bought in iTunes store. any reason for this please/

I can't sync some selected movies i bought in iTunes store. Any reason for this and help please?

I assume they are, but I am not completely certain. I purchased the songs from iTunes, so I would be surprised if they are in a format that is not playable by the Touch.
How do I check whether the format is playable?
Thanks,

Hello, I have an iPad Air. I cannot download adobe flash. Any reason for this? Thanks

Hello, I have an iPad Air. I cannot download adobe flash. Any reason for this? Thanks

No Flash for iPads, iPhones, or iPods
Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash. Adobe is not providing Flash for Apple iOS devices, and they no longer provide Flash for any other cellular phones. Flash is officially gone.
Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
A sample of Apps that can display some Flash content:
1. Puffin
2. SkyFire
3. Photon Flash
4. Browse2Go
5. Swifter
Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."
Download the Facebook app from the iTunes Store. Sign in with your Facebook ID and Password and you won't require flash to play videos.

Any reason for more push from MS for Client OM and REST API during the SP 2013 portal solution dev

hi,
Would like to know, why Microsoft has put more emphasis on Client OM and REST API in SP 2013 portal solutions dev.
Is there any prticular reason for this.If we develop our solutions in Server Object Model any performance/scalability related issues would be appearing in the near future , once i "Go Live" of my portal ?
Any indications given by MS saying, "we wont allow ISV/vendors/ to build server object model based solutions in the near future".

The real question might be "how long will there be an on premise version of SharePoint?" or "will we move our SharePoint to the cloud in the future?" There is an obvious push to the cloud for SharePoint. While all indications point to at least one more on
premise version of SharePoint, as a best practice any code you develop should run in both environments, and that will limit you to the new app model.
As far as performance, traditional server side code runs on the web front end servers. Any poorly performing code would have a negative impact on the servers and users. Therefore, performance/scalability is up to the skills of the developer. The primary
change around the app model is to move all custom code off of the web front ends and onto the client or other servers (via web services). Using the app model you can scale the app servers as needed separately from the "SharePoint" servers. (and of course,
your code would might still work if your SharePoint environment later moves to the cloud.)
Mike Smith TechTrainingNotes.blogspot.com
Books:
SharePoint 2007 2010 Customization for the Site Owner,
SharePoint 2010 Security for the Site Owner

Iphone alarm doesn't work when the phone is charging but works fine when it is not plugged in, any reason for this?

Recently my alarm hasn't been going off on my phone when it is plugged into the charger. This is a problem as i have work most mornings and have been late. When it is not plugged in the alarm works. I know it would mae sense to charge it before i go to sleep, take it off the charger, set the alarm then wake up but was just wondering if there was any reason why I might be experiencing this issue?
Cheers

This is something peculiar, normally that doesn't work that way
when did this happen? if it just happened, then something probably went wrong with either the software or the hardware
do charge the proper way, and see if it happens again
or try completely draining the battery, and charge it to 100% and see if its gonna solve the issue with the alarm

Would there be any reason for a hotspot created in InDesign to change size when exported as a SWF?

Hello
I've got a 280-page InDesign (CS5) document with invisible buttons/ hotspots throughout which I want to export as a SWF.
Once exported, the buttons/ hotspots appear to be sized/ positioned correctly on the first dozen or so pages. Afterwards, the hotspots are consistently sized and positioned incorrectly over the buttons; so that if you were to try and click on the button, you wouldn't actually be clicking on the hotspot at all.
Things I've tried so far:
Exporting the pages in smaller batches, rather than as a single 280-page file
Export the SWF at different sizes
Checking that the hotspost don't have any blank areas inside their boxes (in the same way you can move an image inside a picture box and have blank areas)
I've hit a wall with this – any help/ suggestions you're able to offer would be very much appreciated.
Thanks for your time.

Thanks, but I have searched here but have not found or heard a direct answer to my question as stated above...

Any reasons for not upgrading to AP2.0

Does anyone have any real complaints or reasons not to upgrade to AP2.0 from AP1.5.6?
Apart from the fact that here in the UK the upgrade isn't available until March!!
Many thanks
Mark

If you're using any kind of network storage, don't upgrade until you find another way to work. You will lose access to your libraries. AP 2.0 has the ability to identify network storage and block access to your library through error messages. It only allows the library to be on local drives.
See here for details, http://discussions.apple.com/thread.jspa?threadID=1407432&tstart=45

Image quality lessened in iWeb; any reason for this.

Hey everybody-
Sorry if you've read this once already. I posted this in another thread of mine, but I'm afraid it will get overlooked as the question is buried within a thread that doesn't deal with this issue. So, I figured I'd start a new one in hopes someone can help.
I've gotten all of my images up and running on my iWeb site. Prior to iWeb, I had the same images hosted on my .mac site. I've noticed that the same images that look really crisp and clear and not pixelized on the .mac site look much less so when i've placed them in iWeb. It's like iWeb rez's them down. Does anyone know if iWeb decreases the resolution of the images? I just find it weird that they look really nice on the .mac site, but look really poorly when using iWeb. Any ideas?
Thanks.

Thanks for the reply. Sure thing...both are still up. It/they were intended to be a portfolio site for me (i'm an art director) so I was hoping iWeb could make it look a bit more polished than my .mac site. However, I'd tack the resolution I'm getting on the .mac over iWeb...unless we can figure out why this is happening. Here's the two...the content should be about identical, +/- an ad or two:
.mac:
http://homepage.mac.com/corysmith01/PhotoAlbum1.html
iWeb site:
http://web.mac.com/corysmith01/iWeb/portfolio/Print.html
Very weird. Just look at the first two Yahoo ads and you can see a fairly big difference.
Any ideas why that would happen?

Firefox keeps crashing my Video card driver... Is there any reason for this? And is there anything I can do to stop it from happening?

The problem keeps surfacing every time I use the browser. Around 1-2 times per session. It causes the screen to become unresponsive, and soon after it blacks out for about a second or so. Once it comes back I get a message saying that my Display driver has become unresponsive, but has recovered. Firefox continues to work, but sometimes the upper right row of buttons (minimize, maximize, close) either disappears or ceases to work. Never have had a similar problem before with any other browser or application.

Disable Tools > Options > Advanced : General: Browsing: [ ] "Use hardware acceleration when available"

Is there any reason for streaming of videos being so slow on iphone 4 ios 6.1.3?

I just want to watch videos in my iphone on our perfectly good wifi network that works with other PCs and devices, but the streaming is so slow so often it slows down to a point where it does not play in the middle of the stream. Please help if you got info as there is no easy helpful anywhere about this?!!

Hello Commander888,
It sounds like you are having issues with videos buffering when your iPhone is connected to your home Wi-Fi network. I recommend troubleshooting this issue with the following steps:
Wi-Fi disconnects, or signal strength is less than expected
Move closer to the Wi-Fi router (access point).
Check for sources of potential interference.
Remove any case, stand, or other accessories from your iOS device and see if signal strength improves.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.
You can find the full article here:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Can't disable animated zoom in CS5

Subject pretty much says it all. Photoshop is fully updated via the updater (12.0.1 x64).
20" iMac
2.66ghz
4GB RAM
Mac OS 10.6.4

Sorry for reviving an old thread, yet again...
but for posterity sake (read: the next time I re-install Photoshop and have to go looking for this solution)...
here's the correct answer:
If you want to reverse the key commands easily, simply check "ON" the general preference "Zoom Resizes Windows"...
don't ask me the how's and why's of it... but it works.
Also, in the link above there's a comment on that page that was interesting:
Using "CTRL+Spacebar" and "ALT+Spacebar" temporarily switches to the Zoom +/- tool...
which is actually more efficient than using the key commands (since your right hand is likely on the mouse already, and you need to press CTRL with your left hand anyway).
I like it, smarter... unfortunately the trick now;
is breaking my habit of using "CTRL++/-" for zooming.
Anyway, there's some answers.

TC stopped working, can't find any reason for it.

I've had this TC for about 2 weeks, was working as advertised. This morning I was re-cabling under the desk and now the TC is not showing up anywhere. Light is solid green, I've cycled both the router and the TC on/off. Airport Utility doesn't see any TC at all.
Any ideas?

Welcome to the discussions!
If you have a cable modem, try powering it down for 15-20 minutes (some ISPs will take longer to reset) and pull the battery if it has one. Power down the rest of your system as well.
Power up the modem first and let it run for a few minutes, then power up the TC and let it run for a few minutes and finally your computer. Any luck?
The TC does not have to have an internet connection for the device to display the green light. Can you check your ethernet cable between the modem and the TC and/or the TC and your computer?
Connect your computer to one of the LAN <-> ports on the TC with an ethernet cable and try AirPort Utility that way. If it still can't see it, try pushing the reset button on the TC for 1 second. Sometimes, the TC will just "appear" after a few minutes.
If still no luck after a few tries, you will need to hard reset the TC by holding down the reset button until the amber light blinks rapidly. This will usually take approximately 5 seconds. The device will need to be reconfigured.
If no luck after than, you will need to do a factory default reset as follows:
Power down the TC
Hold in the reset button and keep holding it in as you plug the power back in
Release the reset button after approximately 5-6 seconds
Reconfigure the TC
These resets will not affect any of your backup data, but you may need to reset Time Machine again by clicking the Time Machine clock icon at the top of the screen and selecting Preferences. Click Change Disk, highlight your TC and click Use for Backups.

Would there be any reason for logs to show up in the activity terminal while a computer is not in use?

I have an activity log on my mac from Dec. 7th, at 12:48pm-12:49pm...no one was anywhere near the mac at the time, as we were all downstairs having tea with family. Is it possible for the log to happen without anyone accessing the computer? it was the admin account only...the other two accounts show nothing on the log. The other thing of concern, is that this popped up with it: device_generate_desktop_screenshot.
Is something taking screenshots of my mac? I would paste the full code, but I freaked myself out already, so the mac is off for the night and the wifi is turned off on the mac, as well. Last thing, is that my fully charged mac was so dead it wouldn't boot on Sunday evening, and I hadn't touched it since Friday...is that related?
thanks.

But when I do this, none of the express units show up in the utility anymore. Should I just take it as a blessing that it seems to be working, and not mess with it?
Did you power cycle the entire network to get things in proper sequence?
If not, power off everything....all devices....order is not important
Wait a few minutes
Power up the modem first and let it run a moment or two
Power up the Time Capsule the same way
Power up the powerline devices
Power up each Express one at a time
Power up other devices one at at time
What should the internet setting be on the time capsule and airport expresses.
The setting on the Time Capsule will depend on the type of modem that you have connected. It sounds like the "Share a public IP address" would be correct for the Time Capsule. Everything else must be in "Bridge Mode"
Each of the AirPort Express devices must be configured to "Create a wireless network" using the same wireless network name, security setting and password as the Time Capsule network. Set the Channels as "Automatic" and double check as the last configuration step to make sure that they are set for Bridge Mode.
Then restart the entire network as outlined above and you are in business.
The Express devices should definitely show up in AirPort Utility when you have everything set up.

Animated zoom in CS5 - any reason for it?

Similar Messages

Maybe you are looking for