Animation and Audio not working

I'm having trouble making my Presenter presentations act like the original PPT. PowerPoint presentation has audio and animation that work fine in the slideshow mode. If I publish it in Presenter, no audio comes over automatically. I tried the Import from Presentation option which brought the audio in but when I publish, the animation that had been synched with the audio in PPT is gone. What am I doing wrong?
(Using Office 2007)

See page 18 of the user guide: http://help.adobe.com/en_US/Presenter/7.0/presenter7.0_user_guide.pdf
JP

Similar Messages

Flash CS3 Animation and Audio not timed properly when packaged.

I am trying to create a simulation with audio, mouse movement, mouse clicks and screen changes. When I play the movie in Flash, the animation and the audio are timed properly. However, when I package it, the animation falls behind the audio. I am using wavs for the audio - I've tried mp3s also.
I have a screen displayed with a mouse. The audio and a highlight indicate the next step, then the mouse moves and clicks the desired area - with a audio mouse click. The first "click" sound is pretty close to where it is supposed to be, but as the movie plays, it begins to occur earlier and earlier. So much so, that the audio starts to begin prior to animation is complete later in the move. This is not a real long demonstration, only about 1100 frames, but I notice the problem around frame 180.
Any suggestions?

IE stinks. There's a huge performance difference when playing
SWFs in
Firefox and IE. We have seen SWFs reach 100fps in FF 3.0
while the same SWF
taps out at around 40fps in the latest IE browser. It's not
Flash, it is the
browser.
Adobe Certified Expert
www.keyframer.com
www.mudbubble.com
(if you want to email me, don't look)
"AMK4" <[email protected]> wrote in message
news:gfk9ls$6kf$[email protected]..
> This has me baffled to no end. I have a flash file
that's behaving rather
> odd.
> Even the original author doesn't have an answer. I work
on a WinXP system,
> if
> that matters. When I test the movie within Flash CS3, it
works as
> expected: the
> animations ends as the audio fades out. When I publish
it, and I open it
> up in
> Firefox, it works as expected. But that's where it ends.
On the same
> machine,
> if I view it in Internet Explorer, the animation takes
longer - it plays
> slower. Consequently the audio ends before the animation
is done.
>
> I've tried multiple WinXP machines, they all do the same
thing. In Firefox
> it
> works as expected and the same way as previewed within
Flash CS3. But,
> viewing
> it in IE, and the animation plays longer.
>
> Wanna see it for yourself? Look at the original author's
page:
>
http://www.flashmo.com/preview/flashmo_137_intro/
>
> Open it up in IE and Firefox, side by side if you can.
Does it play
> correctly
> in both (animation ends as the music fades) ?
>
> Suggestions anyone?
>

Animation and Audio not in time

Hello all,
I am a new user of Adobe Captivate 5 and creating my first E-Learning tool with the programm.
In the working mode I combined all animations from PowerPoint to the voice-over adio-files and it is working great. But when publishing my project all animations are delayed and they are not anymore combined with the voice-over.
If I change the time for the animation in PowerPoint excatly at the point where the adio starts ist is still not correct. So the time PowerPoint and the published version ist not the same.
I am publishing the project in Flashplayer 10 in HTML.
Thank you for your help!

See page 18 of the user guide: http://help.adobe.com/en_US/Presenter/7.0/presenter7.0_user_guide.pdf
JP

Powerpoint 2011 mac - video and audio not working

Hello all,
I am using Powerpoint 14.2.5 on my mac running osx 10.8.2
When I try to add video (.MOV / WMV / MPEG-4 etc) or audio files (MP3, AIFF, WAV etc) they appear on the slide but the play controls will not work.
Also when I play my slideshow they do not function.
I can get a movie to play if I set it to play automatcally when that slide is reached but even then it only plays half of the video not the whole thing.
In any case I only want it to play when you click to the next event in the slide show.
Very frustrated.
QuickTime is installed ok.
All updates are installed for both osx and Powerpoint.
Any tips?
M

http://www.microsoft.com/mac/support

Buddies icon animation and audio not received.

I know very little about IM. Only use it to contact a couple of friends. One has an animated icon with audio, I only see the stationary version and no sound. Also, my friend does not see my iChat icon at all. Friend has an AIM account via AOL paid subscription. Any comments would be apprecitated. Thanks.

Hi MFen
I would ask what Instant Messaging application everyone is using ?
iChat will show the Animated Buddy icons from other applications such as AIM on a PC.
(It can be made to show it's own animated icons from another ichat user with a Add-On)
If you mean the Video and Audio green icons where some of them appeared "Stacked" that can be down to the capabilities of the Buddy.
If no camera but has Mic and can A/V chat then it is a Audio (telephone) icon.
Camera and ability to A/Vchat is a Video cam.
iChat uses that have ichat 3 and can join a multichat have the stacked icons.
A PC using AIM will only show single icons as they can not join multichats.
Hope this helps.
6:27 PM Wednesday; February 7, 2007

Sound and audio not working

Sound and audio system of my laptop hp pavalion 2000 is not working.
please help

Hi there @vandan31-sle_
Welcome to the HP Support Forums!
I understand that you are having trouble with your sound. Please post the full product number and OS version that applies to your notebook. Also you can read the following documents if you need help in finding those.
How Do I Find My Model Number or Product Number?
Is the Windows Version on My Computer 32-bit or 64-bit?
For now you can try one of these and see if it helps.
No Sound from the Speakers (Windows 7)
No Sound from the Speakers (Windows 8)
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Mac Pro Locked Up and Now One Video Card and Audio Not Working

Last night, my Mac Pro totally locked up to the point I had to power it off to get it to do anything. When restarted, one of my video cards and my audio are no longer working. I have dual monitors so tried switching the connections to see if it was the monitor and that was not the problem.
I tried doing a formal shutdown after the restart and this also did not clear up my problem.
Everything was working fine prior to the lockup. Any suggestions would be much appreciated.

If you've added RAM and are using the nVidia 9400m video driver, you may be using incompatible RAM
http://www.nvidia.com/docs/IO/60555/MemoryCompatibility_List_DA-04576-001v01.pdf
My wife's MB is locking up when watching videos; hulu, iTunes, VLC. The above is the only answer I've found.
BOL

IChat video and audio not working (yep, me too). Help? Help!? etc. :)

I'm not here to start a rant about Apple or iChat AV. Before 10.4.4, my mate and I had some great chats on iChat AV. He had a cam attached to his Mac and I could see the video absolutely fine. We used to do audio chat, too. It worked fine.
Now we're both on 10.4.4 and I've got a built-in iSight on my new iMac. Obviously, I want to try out some 2-way video now. It won't work for me, though.
We can text chat, we can send files. We can't use audio chat anymore and neither can we use video. It's the old 'did not respond' problem.
Nothing has changed in my setup, connection-wise. I've got a healthy broadband connection which is connected to a BT Voyager 250 modem. Connected to this, via ethernet, is my Airport Express.
I've tried eliminating the Airport Express from the setup, but it makes no difference in this case.
I don't really know a lot about port forwarding and telnet sessions, so... be gentle. Hopefully someone here can help get it working.
Many thanks,
B
iMac Intel / iBook G4 / PowerMac G5 Mac OS X (10.4.4)
iMac Intel / iBook G4 / PowerMac G5 Mac OS X (10.4.4)
iMac Intel / iBook G4 / PowerMac G5 Mac OS X (10.4.4)

HI,
Depite some factual errors
(it's the camera's fault your relatives are on MSN and "everyone is due a rant on the money you have spent" - not to mention the camera is at fault for the shortcomings of the applications other than iChat), it is a very nice rant.
You may want to condsider this http://www.ivideochat.com/
Some applications it will work with Thanks to EZ Jim. (it's his upadte on this FAQ, which was posted pre New Discussions and is waiting for the Boards to accept new versions.
The Insufficient Bandwidth Doc is Here
The Font Error Doc is here
In Use by another App is here
Not to mention This page and it's links.
This one specifically mentions Lighting .
All iChat FAQs
All iSight FAQs
Ryan's start Up Pages
EZ Jim's Front page
My Pages
Hope this helps.
Ralph

Sound for recording video and audio not working

I have tried everything to get the sound to work. I have reinstalled the audio driver. When I go to soundrecording.exe to see if I can record sound it gives me a message "An audio recording device cannot be found." Please help this is driving me crazy.

well, since people can hear you on a call, it's not a hardware problem with the microphone.
It appears to be something wrong with your recording apps -- the camera (in the case of video) and whatsapp.
First attempt would be to:
a) install another camera app with video capability and see if IT will record audio. and
b) uninstall and reinstall whatsapp to see if that fixes the problem.
If that doesn't work, to a backup, then try a hard reset and re-install the apps one by one, confirming that recording works after each install.
/drt

Microphone and Audio not working on Windows 7 (x64)

Hi.
I uninstalled Windows 8 two days ago, trying to put again, on my bootcamp partition, Windows 7. The first time I tried the GPU just wouldn't work, so I installed everything AGAIN to make it work fine. I downloaded those "iMac Late 2009 for Windows 7 Drivers" from apple.com and it was pretty successful: GPU was working again and so did my native resolution, 2560x1440 (I have a 27" Late 2009 iMac with i3). When I tried to talk to one of my friends on Skype I found out the (internal) microphone wasn't working, and so did the audio (also internal). So I installed EVERY drivers I could (realtek, cirrus, bootcamp 3.0, 3.1 and 3.2, I took some drivers from Driver Genius). I don't really know what I have to do!
Please help me, I'm in a tremendous situation.
( sorry for the bad english, I'm italian.)

Che dice Windows nella finestra dei dispositivi audio? Per me l'errore (su Windows 8) era che diceva "no audio devices are installed". In quel caso bisogna fare right-click nello spazio di quella finestra e selezionare "show disabled devices" e "show disconnected devices". Quando ho fatto quello sono riapparsi sia il microfono sia i parlanti. Spero che ti abbia aiutato in qualche modo.
(Mi dispiace per il brutto Italiano, sono Australiano)

Ichat video and audio not working

They used to work just fine. Have no idea what is going on. I get the error 8 that every one around here is talking about. I've tried the suggestions of bandwidth, firewall etc. Don't know what else to do.

Hi,
Error 8 is about either Ports or the Way the LAN is set up.
SO has anything changed in the way you have set up your LAN ?
Also are you using a Routing device that gives the computer it's IP (DHCP) ?
If so do you also use Port Forwarding to open the ports for iChat ?
If this is the case is the computer at the IP that the Port Forwarding points to ?
8:43 PM Sunday; November 30, 2008

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Iphone 5.1 update messed up sound. Audio not working in youtube, music and video apps. Phone is not muted! nor is volume turned down

Basics from the User Guide are restart, reset, restore from backup, restore as NEW. Unless you've tried ALL of these, you're not done troubleshooting.

Audio not working on channel 5 and 7,, okay on all others????

audio not working on channel 5 and 7,, okay on all others????

dalharris wrote:
audio not working on channel 5 and 7,, okay on all others????
Without knowing all of the specifics in your situation, you may want to try these options:
- If you have a DTA, and your remote control has a LANG button on it, press it.
- If you have an HD or SD full cable box:
Most low or no audio issues can be corrected by setting the Optimal Stereo output of the cable box. Here are the steps: Press the Menu button twice on your remote control. Select Setup. Select Audio Setup Under the Optimal Stereo setting, choose "Select to Optimize" and press OK/Select on the remote control
- The audio settings on your cable box may have accidentally been changed:
Press the Menu button twice on the Comcast Universal Remote Control. A new screen below will appear, with the top-left option automatically selected.
Use the down-arrow key (above the Info button) to navigate to Setup and press OK/Select (the center key on the remote control in the middle of the 4 arrow/directional buttons).
Use the down-arrow key (above the Info button) to navigate to Audio setup and press OK/Select.
The Default Audio Track will default to the first option–Channel default–which which is always the channel’s main audio track (unless it was previously changed).
Press the right-arrow navigation key to change the audio track. Changing this selection will instantly change the audio.
1. Press once for English
2. Press twice for Spanish (Español) OR to activate Video Description (DVS)
3. Press three times for French (Français) 4. Press four times for Portuguese (Portugues).
5. Then press the Exit button (above the Volume button) to resume program viewing
Please note: These audio options can only be heard if the program provider or cable channel is providing that additional audio option.
- If the above does not help, look at the remote control for your TV set (not your cable box) as the TVs language settings may have been accidentally changed (sometimes labeled as MTS or SAP on the remote or via your TVs settings menu).

2 of 4 speakers and Subwoofer not working for Altec Lansing Lucasfilms THX Surround (circa 2003)

I am attempting to connect my Altec Lansing Lucasfilm THX 5.1 sound system to my HP ENVY All-in-one. I think the original audio card for the sound system came on a Dell with Soundblaster.
I have connected the green audio to the jack in the back which only gets 2 of the 4 speakers working (even after configuring the speakers). The subwoofer is connected to the sub jack in the back panel as well and is not working at all. I realize that I am trying to have an ancient sound system work with my fancy new HP Envy. Am I asking too much?? I thought maybe a driver update might be needed. But in theory, if those jacks are available in the back it should work (she says optimistically).
Any suggestions or advice would be appreciated.

Not a problem. Thank you for the additional information.
It sounds like you have the speakers connected correctly. If there is only one connector for all of the speakers, it may be that you will only be able to use two of them. However, I am not certain why the subwoofer isn't working. Is it selected in the Control Panel / Sound? I realize that you said the speakers are configured in the Control Panel, but is the subwoofer separate?
I have an old (2001) Polk Audio set of speakers. I have only been able to get two of them and the subwoofer to work with my new HP computer. It sounds fine without the other two speakers.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HT201210 AUDIO NOT WORKING PROPERLY AFTER INSTALLED IOS7

After installed ios 7
photos not able to see fully
audio not working properly.... [no treble, no depth in sound, very low soung even the volume is full]
get strucks while playing games

This board is full of people that are update crazy...
even when they have perfectly good working systems.
i know i thought well it's just a security update not a major update.
Best advice... whenever updating the OS, unplug all
firewire devices.
will take note of that from now on.
Was this auto-update? Try downloading the file and
running the update again with all firewire devices
unplugged.
While the 828 is disconnected perform the factory
reset
again.
Disconnect the firewire cable from the 828mkII
-Press the Setup knob
-Turn the Setup knob all the way to the right
-Press the Select knob
-Press the Value knob
-Power off the interface and plug the firewire cable
back
in
-Power the interface back on
i have the original 828 not mark 2, so no reset i know of, just power on off.
After the Mac updates... reboot and plugin the 828,
see if that doesn't get you going.
pancenter-
cheers pancenter, i'll give it a whirl updating without the interface plugged in. thanks for all your help.

Animation and Audio not working

Similar Messages

Maybe you are looking for