Animation going over my position: fixed nav?

Newbie here so any help wuold be appreciated
SO I have a nav that stays at the top of the window with position: fixed but when I scroll down my animation goes "on top" of the menu as if it was a layer on top and covers the nav.
Any way to fix this?

Hi,
I would pull your nav to the top of the element panel this means that it is on top of everything.
If this doesn't work I would use Z-index code to control the nav.
Hope this helps

Similar Messages

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different p

I am trying to create a simple animated gif in Photoshop. I've set up my frames and want to use the tween to make the transitions less jerky. When I tween between frame 1 and frame 2 the object in frame two goes out of position, appearing in a different place than where it is on frame 2. Confused!

Hi Melissa - thanks for your interest. Here's the first frame, the second frame and the tween frame. I don't understand why the tween is changing the position of the object in frame 2, was expecting it to just fade from one frame to the next.

HT201317 Some of my photos in my Photo Stream on my iPhone are not going over automatically to my computer. How do I fix this?

Some of my photos in my Photo Stream on my iPhone are not going over to my laptop. I can't figure out why, and I use them for scrapbooking. My laptop is a PC NOT a MAC.

Welcome to the Apple Community.
For the avoidance of doubt, are the photos actually in photo stream on your iPhone or just in your camera roll?
If they are in photo stream, then you might try turning photo stream off and on again on both devices, restarting both devices before enabling photo stream once again.

How can I tell if my iPad's GPS is even attemping to get a position fix?

MC773LL/A iOS 7.0.4
The main reason I purchased an iPad was to use it as backup for GPS navigation electronics aboard my boat. I've used it several times just to test it, with purchased nav apps, starting from my home port, and everything worked as expected. Recently I didn't power up the iPad until I was at sea but only 15 miles from home port. It could not seem to obtain a position fix, and the GPS arrow indicator did not appear. I had no way of knowing if it was even trying to get a fix. My other GPS devices at least tell me they're trying. Is there some way know if an iPad is even trying to get a first fix? When I returned home, I powered up the iPad and everything worked fine. All the location services settings and others, including wi-fi, were left untouched.
Is there some trick to wake up the iPad's on-board GPS to get it working?
And how would I know that it's activated and trying to get a first fix?
Thanks.

My iPad has onboard true GPS. It's Model MC773LL/A
The app is iNavX. The GPS and the app usually work just fine. But, as noted in my original posting, I had an incident where the GPS did not seem to activate. And I could not tell if there was some way to see if it was even trying to get a position fix. The GPS arrow didn't appear. More details in my original posting. My questions remain:
Is there some trick to wake up the iPad's on-board GPS to get it working?
And how would I know that it's activated and trying to get a first fix?

Anyone going over their Data now that they have a Samsung S5?

I just recently (3 weeks) purchased a Samsung S5 and it shows I am using Data when I am positive I am connected to WIFI (such as I am at home and I know our WIFI is working). We're going over our data limit for the first time ever. It even shows data usage this morning while I was at home and again...the wifi is working at home. Anyone have any answers?

Go into Settings ... Data Usage, and look at your Mobile data and wifi usage. Which apps are using the mobile data?
We have 4 lines on our family plan, and over the years have had several smartphones (iPhones, Blackberry, Android and Windows phones, various models). Only once did I see a data "spike", when my daughter first got her iPhone 5C. It was gobbling data, till she went into her app list and shut off the data for lots of things.
Whenever we get a new (smart) phone, I typically don't activate it until I have used wifi to download all my apps and get my email hooked up. Once it all works on wifi, then I'll activate the new phone. I make sure my apps are set to update over wifi only (it may be a setting within each app), and my photos are backing up over wifi only. Facebook now auto plays videos, and you need to change the setting to play videos on wifi only. Same with email - set it to down load attachments over wifi only.
There are lots of ways data your device can use data; finding out which apps and what processes are the culprits (by looking at the data usage on the phone) can help you to use your data allotment most effectively.

My firefox goes over 125.000 K

Hi guys,i installed on my computer Mozila Firefox the last version of 12.12.2013 and it's going over 125.000 K ,even if i am on the Google page,even if i open it in safe mode,even if i create a new profile and i tryed this.
I run Windows 7 Ultimate 32 bit.
Video card sapphire hd 4650 AGP - 1024 MB
Memory - 1024 MB.
Procesor amd sempron 3300+
ATX P4 Power Supply - 400W
Motherboard K8upgrade-nf3
So what's the problem,what should i do next?

I think that is normal usage.
Check:
[https://support.mozilla.org/en-US/kb/firefox-uses-too-much-memory-ram Firefox uses too much memory (RAM) - How to fix]
Also you can see what the memory is used to on the about:memory page.

Notebook 8470p cpu temp goes over 75 C support center claimes its normal

cpu goes over 75 C after local support replaced fan ,m/b ,cpu they claim its normal i dont buy that answer since they dont know how to deal with this issue they try to sell me stories how can i ascalate this issue to recieve good service and have the laptop fixed once and for all warranty will expire within 6 months need to solve issue soon

HI @alfredf .
Welcome to the HP forum!
To get your issue more exposure I would suggest posting it in the commercial forums since the Elitebook 8470p is a commercial product. You can do this at:
Commercial/Notebook - HP ProBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP EliteBook 8470p Notebook PC.
I hope this helps!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Help docking fixed nav bar to top on scroll

Help docking fixed nav bar to top on scroll
Hello,
I'm trying to get a nav bar that is positioned in the middle of a page to "dock" with the top of the browser when it is scrolled to, and undock when the browser is scrolled back up past it.
An example of this can be seen on http://lesscss.org.
Is there any way to do this in Muse?
Thanks for your help / suggestions.

I am familiar with the pinning feature.
I would like the user to be able to scroll down the page and once the nav bar that was once in the middle of the page is at the top, for it to dock or pin then. And when the user scrolls back to the top the nav bar will return to the middle of the page.
If you wouldn't mind taking a closer look at http://lesscss.org there is an example of exactly what I am talking about. The navigation bar is in the middle of the page and it doesn't pin until the user scrolls to the top.
Thanks!

Can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

can I transfer pictures from one iPad to another without going over iTunes?, can I transfer pictures from one iPad to another without going over iTunes?

Yes, use 3rd party apps like Photo Transfer App.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/69507ce7f854c405f54 77bea99f4d498.jpg
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/79b3173fda7b6a6e148 5b463198f6acf.jpg

Animated Gif over Flash document?

Hi folks,
Quick question here ...
Is it possible to overlay an animated gif on top of a flash banner?
I have an html page, where I want to re-work our main banner with flash elements, but would like to place our existing animated gif over the right hand part of the background banner.
Hope that makes sense?
Kind Regards,
Cal

... thanks Ned!
Just knowing that it's possible is encouraging, so I'll be sure to dabble with your suggestion over the festive season, otherwise, I'd have to learn how to combine several flash motions in flash at one time, where that could certainly fry my brain "cell" lololol
All the best.

I want to know how to get the web addresses to go away that appear in the bottom left corner of the browser every time my mouse goes over a link

Any time that my mouse goes over a link on a web page a little box in the bottom left corner of the browser pops up showing the web address for that link and it is really annoying, especially when i am on facebook because there are so many links on the home page i cant move my mouse anywhere without that box popping up and blocking part of my conversations. I was wondering if there was any way to turn this off. I've checked through the options and to my knowledge there is no way to turn it off. Just wondered if anyone else has had this problem or knew if there was a way to get that box to go away.

Another option would be to use the following extension to push those messages into the status bar. It could be a convenient way to have your messages visible when you want them, but with less distraction.
https://addons.mozilla.org/en-US/firefox/addon/status-4-evar/
If you try it, let us know what you think.

He XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side

hi experts ,
we are using classic scenario (ECC 6.6 & SRM 7.0)
we have are configured Procure-to-Pay Scenario ,Note 1263876 - SAP SRM: Configuration of Procure-to-Pay Scenario.
but facing issue.
The XML message is going over to SRM from XI , but getting an application error (Exception) when checking in sxmb_moni on the SRM side. So we are not able to see the PR in the Sourcing cockpit in SRM.
error as below
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="http://sap.com/xi/SRM/SE/Global">ExchangeFaultData</SAP:ApplicationFaultMessage>
<SAP:Stack>Application has thrown an exception</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Vijay,
Can you tell us the interface name?
If it is stuck in FEH (Application Error) in SRM then you can check the detail error by going into tcode /n/sappo/ppo2.
You need to enter the Business Process, Order Assignment and Mode Of Postprocessing Order and then execute.
It will show you all the messages stuck in application error for that interface and if you double click on any one of them you will get to see the detailed error with options to Discard, Repeat etc.
Let us know if this helps you.
Regards,
Mayur

Css position:fixed works on mozilla 21/IE10 but not in chrome ?

Hello guys,
     I want to stick in position a rectangle or photo while scrolling browser.
I am using    sym.$("Rectangle3").css({"position":"fixed"});
This works fine in Mozilla and IE10 but not in chrome (Version 27.0.1453.116 m)
Anyone to help please?
Thanks in advance.
Anthony

Antony,
I will defer to what Sarah said.
In the future if you needed to add browser prefixes to correct differences which happen for a number of things like transform or shapes, etc..
Or course this will not correct a bug which I was not aware of in this particular case.
Here is how to add browser prefixes:
In this case to make an ellipse a circle because chrome did not recognize the ellipse. I added Opera prefix to show you the syntax.
sym.$('Ellipse').css({
          '-webkit-border-radius': '50%',
          '-o-border-radius': '50%',
          'border-radius': '50%',
          'width': '35px',
          'height': '35px'
Sometime the syntax is a little different. Just google the css to make sure.
Here is another example for a Star Wars intro where I added browser prefixes for Explorer (-ms-), Chrome (-webkit-), and Firefox(-moz-).
The code can be combined but I did not this time for this sample.
Sample files here:
https://www.box.com/s/bdu5c4lq67fkfy7blfhc
// FF
sym.$('gradient').css('background', '-moz-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-moz-transform-origin', '50% 100%');
sym.$('container').css('-moz-transform', 'perspective(250px) rotateX(25deg)');
// Chrome and others
sym.$('gradient').css('background', '-webkit-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-webkit-transform-origin', '50% 100%');
sym.$('container').css('-webkit-transform', 'perspective(250px) rotateX(25deg)');
// Internet Explorer
sym.$('gradient').css('background', '-ms-linear-gradient(top, rgba(0,0,0,1) 0%, transparent 100%)');
sym.$('container').css('-ms-transform-origin', '50% 100%');
sym.$('container').css('-ms-transform', 'perspective(250px) rotateX(25deg)');

Why is the text going over the image????

Please refer to video here http://www.youtube.com/watch?v=2rN6Ndm9sFo&feature=youtu.b
Why is the text going over the image when the text layer is below the image layer?? It is so frustrating.

Are you sending the texts to his phone number or his Apple ID? It might be that the texts originated from your phone is to his Apple ID and not his phone number and his Apple ID was not registered for the Message app on his phone. So any texts to his Apple ID is not received by his phone.
Can you receive his texts? If yes, then reply back from what he send you and see if he can receive the texts.

Satellite C660 - Touchpad highlighting everything it goes over

I have a problem with my Satellite C660 with the Synaptics touchpad V7.2 sensitivity. The cursor keeps highlighting everything it goes over and dragging the files or programmes or opening them.
It's driving me mad and restoring it to a previous date doesn't stop it, nor does clicking the tapping function off in the Synaptics properties box or reverting to default.
Anyone out there able to help?

Hi
Try to install the Synaptics latest driver from the Synaptics driver page:
http://www.synaptics.com/en/drivers.php
Furthermore you can adjust the touchpad settings in control panel -> mouse -> device settings -> settings button
Here you would find lot of different options which would improve the touchpad functionality.

Animation going over my position: fixed nav?

Similar Messages

Maybe you are looking for