Animation looping even after pause?

Hi all,
I have a slide that pauses and awaits user interaction, but I would like a small gif animation to continue looping through the pause while it waits for the user's response. It should disappear on the next slide.
Is this possible? Any pointers?
Thanks!

Even though you ultimately 'fixed' the problems with your internal drive by erasing it, that could still be your problem - since you came up with errors when trying to repair it. It sounds like a hardware issue and the disk seems to be the most obvious problem. I would try replacing the internal drive. Or take your machine back to your local Apple Store and have them run extensive diagnostics on the computer - should the problem be a bad drive you can either have Apple replace it or you can replace it yourself.
The diagnosis won't cost you a thing - any repairs will, if you authorize them.
Clinton

Similar Messages

HotSync Loop Even After Hard Reset

My Treo755p decidedly to randomly go into a HotSync loop (even though I never set-up the HotSync to my laptop). I did a hard-restart, lost all the data, and restarted and it still does the HotSync Loop....Am I just screwed...Of course, I just landed in The Virgin Islands and don't have any of the HotSync software or connector...This is my fourth treo..why do i even bother anymore? Any suggestions?
Post relates to: Treo 755p (Sprint)

Hello and thank you for using the Palm Help Forums!
Try a warm reset and if that doesn't work perform another hard reset. When performing a hard reset be sure to say "Yes" to erase all data. For further information and instructions on resets please visit kb.palm.com and look up article number 887 in the solution I.D search field.
I hope this resolves your issue.
-Pat

Ipod touch nano recovery and restore loop even after changing drive letter twice!

iPod Touch Nano
Software version: 1.2
OS: Windows 7 32bit
iTunes version: 10.6
I can't restore or do anything with my iPod nano touch. I followed instructions and the KB (http://support.apple.com/kb/TS1493#changedrive) that recommended changing the drive letter in Windows. I changed the drive twice, restarted the machine, followed the instructions to restore after the recovery message, but still nothing. I even uninstalled / reinstalled iTunes.
I also reset the iPod multiple times (http://support.apple.com/kb/HT1320), which is the last step recommended in the final KB article: http://support.apple.com/kb/TS1441
This is very frustrating and a pretty poor software design by Apple! I am pretty sure my drive letter is free.
I also tried my Macbook Pro but still same issue.
Any other ideas to what I can do to fix this or do I need to go to the Apple store to fix this at this point?
Many thanks

UPDATE:
While the iPod Nano would not even turn on in the two computers I tried earlier at home (and posted above about), when I plugged it in on my work computer (PC, Windows 7), the iPod Nano turned on fine as a brand new set up on this computer's iTunes and now it is working.
Very strange that it would crap out at home every time even though I changed the drive letter and followed all the other instructions.
I have to yet check if I can sync at home or not or if it will ask me to restore again!

Iphone 3gs ios 6.1 stuck in boot loop even after restore

What happen was it froze so I did a hard rest after that it stayed on a boot loop. Done restored it several times stayed the same after I do a restore itunes does recognize the iphone but it stays on the Apple logo can anyone help

Something does not sound right with your story. An iPhone 3g is only capable of running iOS4.2.1 and not 6.1.6. Since the iPhone now appears to have relocked itself to the original carrier, it sounds like that iPhone is jailbroken to allow it to run a version of iOS that it not supposed to and to unlock illegal from the original carrier. Either get you details straight or we can't help you.

SWF animations loop even though option not selected

Anyone else experience that?
As was the problem with Cp3, they, once again, did not include the source files. I suspect that they are in AS2 and therefore don't work in an AS3 project.
Thoughts?
M-

Triple-click anywhere in the line below on this page to select it:
~/Library/Safari/LastSession.plist
Right-click or control-click the highlighted line and select
Services ▹ Show Info in Finder (or just Show Info)
from the contextual menu.* An Info dialog should open.
Does the dialog show "You can read and write" in the Sharing & Permissions section?
In the General section, is the box labeled Locked checked?
What is the Modified date?
If you don't have read and write access to the item, change the settings as directed here. Note, however, that if one file has wrong access settings, most likely others do as well. If the item is locked, unlock it.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it (command-V). Select the line you just pasted and continue as above.

My vi is writing just the same data into spreadsheet even after changing the loop iteration time. hw can I change this mode ?

My VI is writing the same amount of data into spreadsheet file even after changing the for-loop iteration time

You should post the VI (with appropriate values saved as default) to this thread. (At least a JPEG or PNG screenshot).
Inside the For Loop, right-click on the N terminal and create Indicator. Run the VI and you will see how many times the Loop spins.
Further guessing: You may have a 2D array with two rows and many columns feeding the For Loop.

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

My ipod touch gets stuck on the same song, even after I uncheck the loop button. I am trying to play it in my 2007 vw with a power adapter that allows it to charge and play through my navigation unit. Please help. Thank you.

Yes, first try deleing both songs.
If still problem
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, ,make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Index is not getting picked even after providing hint

Hi All
The index pk_sku is not getting picked even after providing the hints when executing the query.Please kindly give me such recommendations.I am providing the information.
select * from
(select /*+ index(s pk_sku) */
      to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
      t.client_id as CLIENT_ID ,
      t.site_id as SITE_ID,
      tz.time_zone_name as TIME_ZONE_NAME     ,
      t.owner_id as OWNER_ID,
      t.sku_id as SKU_ID,
      t.reason_id as ADJUST_TYPE,
      to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
      t.reference_id as RECEIPT_ID,
      t.batch_id as BATCH_ID,
      t.update_qty as UPDATE_QTY,
      t.lock_code as LOCK_CODE,
      s.description as SKU_DESCRIPTION
from mv_inventory_transaction t
      JOIN timezone tz ON tz.site_id = t.site_id ,
       mv_sku s
where   t.sku_id= s.sku_id
and     t.client_id=s.client_id
and   ( :client is null or :client = t.client_id)
and    ( :site is null or t.site_id in (:site))
and    ( :owner is null or t.owner_id in (:owner))
and    t.code= 'Adjustment'
and   (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and      (:sku is null or t.sku_id in (:sku))
UNION ALL
(select /*+ index(s pk_sku) */
     to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
    t.client_id as CLIENT_ID ,
      t.site_id as SITE_ID,
                      tz.time_zone_name as TIME_ZONE_NAME     ,
      t.owner_id as OWNER_ID,
      t.sku_id as SKU_ID,
      t.reason_id as ADJUST_TYPE,
      to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
      t.reference_id as RECEIPT_ID,
      t.batch_id as BATCH_ID,
      t.update_qty as UPDATE_QTY,
      t.lock_code as LOCK_CODE,
      s.description as SKU_DESCRIPTION
from mv_inventory_transaction_arch t
      JOIN timezone tz ON tz.site_id = t.site_id,
       mv_sku s
where   t.sku_id= s.sku_id
and     t.client_id=s.client_id
and   ( :client is null or :client = t.client_id)
and    ( :site is null or t.site_id in (:site))
and    ( :owner is null or t.owner_id in (:owner))
and    t.code= 'Adjustment'
and   (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and      (:sku is null or t.sku_id in (:sku))
order by sort_1,2,3,4,5
version = Release 10.1.0.5.0
SQL> sho parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.1.0.5
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
sho parameter db_file_multiblock_count_read
sho parameter cursor_sharing
SQL> sho parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.1.0.5
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
SQL> sho parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     16
SQL> sho parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACTExplain plan
| Id | Operation                              | Name                          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                       |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   1 | SORT ORDER BY                         |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   2 |   VIEW                                 |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   3 |    UNION-ALL                           |                               |       |       |            |          |
|   4 |     NESTED LOOPS                       |                               |     2 |   984 | 29686   (1)| 00:05:57 |
|   5 |      HASH JOIN                         |                               |     1 |   326 | 26870   (1)| 00:05:23 |
|   6 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
|   7 |       VIEW                             | MV_INVENTORY_TRANSACTION      |    25 | 7600 | 26866   (1)| 00:05:23 |
|   8 |        UNION-ALL                       |                               |       |       |            |          |
|   9 |         FILTER                         |                               |       |       |            |          |
| 10 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |     1 |    67 | 24327   (1)| 00:04:52 |
| 11 |           INDEX RANGE SCAN             | IDX_CODE_CLIENTID_690         | 79681 |       |   518   (1)| 00:00:07 |
| 12 |         FILTER                         |                               |       |       |            |          |
| 13 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |    24 | 2328 | 2539   (1)| 00:00:31 |
| 14 |           INDEX RANGE SCAN             | IDX_CODE_646                  | 9269 |       |    46   (0)| 00:00:01 |
| 15 |      VIEW                              | MV_SKU                        |    37 | 6142 | 2816   (1)| 00:00:34 |
| 16 |       UNION-ALL                        |                               |       |       |            |          |
| 17 |        MAT_VIEW ACCESS FULL            | MV_SKU                        |   335K|    10M| 2535   (1)| 00:00:31 |
| 18 |        MAT_VIEW ACCESS FULL            | MV_SKU                        | 37839 | 1699K|   280   (1)| 00:00:04 |
| 19 |     NESTED LOOPS                       |                               |    54 | 26568 |   315K (1)| 01:03:10 |
| 20 |      HASH JOIN                         |                               |     1 |   326 |   313K (1)| 01:02:37 |
| 21 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
| 22 |       VIEW                             | MV_INVENTORY_TRANSACTION_ARCH |   576 |   171K|   313K (1)| 01:02:37 |
| 23 |        UNION-ALL                       |                               |       |       |            |          |
| 24 |         FILTER                         |                               |       |       |            |          |
| 25 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |     1 |    72 | 19258   (1)| 00:03:52 |
| 26 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         | 36016 |       |   287   (1)| 00:00:04 |
| 27 |         FILTER                         |                               |       |       |            |          |
| 28 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |   575 | 55200 |   293K (1)| 00:58:45 |
| 29 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         |   367K|       | 3466   (1)| 00:00:42 |
| 30 |      VIEW                              | MV_SKU                        |    37 | 6142 | 2816   (1)| 00:00:34 |
| 31 |       UNION-ALL                        |                               |       |       |            |          |
| 32 |        MAT_VIEW ACCESS FULL            | MV_SKU                        |   335K|    10M| 2535   (1)| 00:00:31 |
| 33 |        MAT_VIEW ACCESS FULL            | MV_SKU                        | 37839 | 1699K|   280   (1)| 00:00:04 |
------------------------------------------------------------------------------------------------------------------------when put in sql tuning advisor,It recommended with better plan using indexes
| Id | Operation                              | Name                          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                       |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   1 | SORT ORDER BY                         |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   2 |   VIEW                                 |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   3 |    UNION-ALL                           |                               |       |       |            |          |
|   4 |     NESTED LOOPS                       |                               |     2 |   848 | 26900   (1)| 00:05:23 |
|   5 |      HASH JOIN                         |                               |     1 |   326 | 26898   (1)| 00:05:23 |
|   6 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
|   7 |       VIEW                             | MV_INVENTORY_TRANSACTION      |    25 | 7600 | 26894   (1)| 00:05:23 |
|   8 |        UNION-ALL                       |                               |       |       |            |          |
|   9 |         FILTER                         |                               |       |       |            |          |
| 10 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |     1 |    67 | 24352   (1)| 00:04:53 |
| 11 |           INDEX RANGE SCAN             | IDX_CODE_CLIENTID_690         | 79681 |       |   518   (1)| 00:00:07 |
| 12 |         FILTER                         |                               |       |       |            |          |
| 13 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |    24 | 2328 | 2542   (1)| 00:00:31 |
| 14 |           INDEX RANGE SCAN             | IDX_CODE_646                  | 9269 |       |    46   (0)| 00:00:01 |
| 15 |      VIEW                              | MV_SKU                        |    37 | 3626 |     2   (0)| 00:00:01 |
| 16 |       UNION-ALL PARTITION              |                               |       |       |            |          |
| 17 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    34 |     3   (0)| 00:00:01 |
| 18 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     2   (0)| 00:00:01 |
| 19 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    46 |     2   (0)| 00:00:01 |
| 20 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     1   (0)| 00:00:01 |
| 21 |     NESTED LOOPS                       |                               |    54 | 22896 |   313K (1)| 01:02:38 |
| 22 |      HASH JOIN                         |                               |     1 |   326 |   313K (1)| 01:02:38 |
| 23 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
| 24 |       VIEW                             | MV_INVENTORY_TRANSACTION_ARCH |   576 |   171K|   313K (1)| 01:02:38 |
| 25 |        UNION-ALL                       |                               |       |       |            |          |
| 26 |         FILTER                         |                               |       |       |            |          |
| 27 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |     1 |    72 | 19269   (1)| 00:03:52 |
| 28 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         | 36016 |       |   287   (1)| 00:00:04 |
| 29 |         FILTER                         |                               |       |       |            |          |
| 30 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |   575 | 55200 |   293K (1)| 00:58:47 |
| 31 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         |   367K|       | 3466   (1)| 00:00:42 |
| 32 |      VIEW                              | MV_SKU                        |    37 | 3626 |     2   (0)| 00:00:01 |
| 33 |       UNION-ALL PARTITION              |                               |       |       |            |          |
| 34 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    34 |     3   (0)| 00:00:01 |
| 35 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     2   (0)| 00:00:01 |
| 36 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    46 |     2   (0)| 00:00:01 |
| 37 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     1   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------------------So ,after checking the recommended plan I tried to execute the query with the hints,even then it is picking up the indexes in the explain plan.So please kindly help in solving the issue
The pk_sku is the index created on client_id and sku_id columns
Thanks
GV

riedelme wrote:
My experience is differernt - hints will be followed if the optimizer determines they will be beneficial and not if they will not, including my current project on 11gR2. The example below (unfortunately only 11gR1) disproves your theory, showing the index hint is followed and that the cost increases by a factor of five.
The most common cases of the optimizer apparently ignoring a hint are due to operator error, the hint is not well formed, or cannot be followed. There are a couple of documented cases where a hint will be ignored - first_rows used in CTAS is one.
Jonathan Lewis writes a lot about it on his blog showing that the optimizer always acts on a well formed hint if it is at all possible.
SQL> create table t (n number not null, c varchar2(1000));
Table created.
SQL> insert into t select 1, rpad('x',1000,'x')
2 from dual connect by level <= 50000;
50000 rows created.
SQL> create index t_ix on t (n);
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 't', cascade => true)
PL/SQL procedure successfully completed.
SQL> explain plan for
2 select max(c) from t where n =1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2966233522
| Id | Operation          | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |      |     1 | 1004 | 1574   (1)| 00:00:19 |
|   1 | SORT AGGREGATE    |      |     1 | 1004 |            |          |
|* 2 |   TABLE ACCESS FULL| T    | 50000 |    47M| 1574   (1)| 00:00:19 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
   2 - filter("N"=1)
14 rows selected.
SQL> explain plan for
2 select /*+ index (t t_ix) */ max(c) from t where n = 1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3231292748
| Id | Operation                    | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT             |      |     1 | 1004 | 7244   (1)| 00:01:27 |
|   1 | SORT AGGREGATE              |      |     1 | 1004 |            |          |
|   2 |   TABLE ACCESS BY INDEX ROWID| T    | 50000 |    47M| 7244   (1)| 00:01:27 |
|* 3 |    INDEX RANGE SCAN          | T_IX | 50000 |       |    98   (0)| 00:00:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   3 - access("N"=1)
15 rows selected.

Firefox apears in firewall even after closing all processes and continues to download file

firefox continues to download files even after closing all the processes, this behavior was noticed by looking at the my firewall activity log. I am using get them all download manger (firefox extension) to download files in firefox. When first time firefox is started after starting computer it doesnt have any problem, but once I open the download manager and start downloading files it never stops.
I am using : down them all version 2.05 beta on FF 3.6.12
1. start computer
2. open firefox
3. check firewall status (bitdefender firewall running at report level) - no activity noticed
3. add url to download file in download them all manager
4. start download - bitdefinder shows firefox accessing internet
5. pause download
6. check firewall status - bitdefinder doesn't show firefox accessing internet in process listing but it does show network activity is going on at its peak.
7. close all firefox windows and remove firefox.exe from task manager
8. check bit defiender firewall status it continues to run at peak eating up all the network bandwidth
9. remove rule of firefox from firewall so as it may prompt when firefox try to connect to internet (bit definder firewall is running in report mode for approval for each connection)
10. as soon as rule removed, bit definder pops up window sayaing firefox is trying to access remote server (same from where the download was earlier started)
11. Allow the firefox to access it and again it will start downloading in background and bitdefinder shows up internet activity at its peak.

naah, looks like its problem of firefox, i removed the plugin and tried downloading using the normal download winodw of firefox but same problem, this time it starts picking up item from the download window and continues to download

Execution does not end even after all records updated..

Hi,
I have plsql code like :
declare
begin
for x in ( select .......) loop -- about 4000 times
for y in ( select ............) loop -- about 50 times
end loop;
-- some code goes here to manipulate clob data
-- like creating free temp clobs - use - then free them
-- Update statement that update some table using clob values.
insert into tablex values(sysdate);
commit;
end loop;
end;
Here I can monitor from other window howmany records are inserted into tablex and howmany updated in update statement by...
select count(1) from tablex;
After 50 mins i can see that all records are updated but...
plsql code does not end its execution it continues even after all records are updated..untill i have to kill the session or let be run for long time.. :(
I can not understand why this it is not ending execution..
What could be the problem ...

Hi,
Here it is.....
declare
v_text_data TableA.text_data%type;
v_clob clob;
type dummyclob_t is table of clob index by binary_integer;
dummyclob dummyclob_t;
v_str varchar2(255) := 'ddfsajfdkeiueimnrmrrttrtr;trtkltwjkltjiu4i5u43iou43i5u4io54urnmlqwmreqwnrewmnrewmreqwnm,rewqnrewqrewqljlkj';
begin
select data bulk collect into dummyclob from sfdl_clob; -- five rows containing clob data upto 1MB
for x in (select object_id
from TableA
where object_type = 'STDTEXT' ) loop
dbms_lob.createtemporary(v_text_data,TRUE);
for y in (select '<IMG "MFI_7579(@CONTROL=' || ref_id || ',REF_ID=' || ref_id || ').@UDV">' temp_data
from TableB
where object_id = x.object_id) loop
v_text_data := v_text_data ||
case
when trunc(dbms_random.value(0,7)) = 0
then chr(10)
else v_str
end ||
y.temp_data;
end loop;
select text_data into v_clob from TableA where object_id = x.object_id for update;
if v_text_data is not null then
dbms_lob.append(v_clob,v_text_data);
end if;
dbms_lob.append(v_clob,dummyclob(trunc(dbms_random.value(1, 6))));
dbms_lob.freetemporary(v_text_data);
insert into xyz values (sysdate);
commit;
end loop;
end;
Thanks for your time..:)
Rushang.

Laggy keyboard even after 2.1 update

Is anyone still experiencing a laggy keyboard even after the 2.1 update? I'm still having problems when texting a typing emails...my keyboard just pauses and then will catch up.

TofuBrown wrote:
Is anyone still experiencing a laggy keyboard even after the 2.1 update? I'm still having problems when texting a typing emails...my keyboard just pauses and then will catch up.
Same as mate. Not as bad but the keyboard can't keep up with me.

Module status on LMS is showing as incomplete - even after the user has completed the module.

Hi Folks,
Hope you are all keeping well! I have a bit of a problem here. On a number of modules that were developed using presenter - and custom animation (including click next to continue) etc etc, the LMS is not showing the module status as complete - even AFTER the user had comleted the module and closed. This problem has been noticed only when the user uses the CLICK NEXT or click this part of the screen to continue.
When the user navigates using the presenter control buttons - to navigate the training content that is, the LMS is correctly showing as the module has been completed.
The problem I am having is that - is there any way to make presenter detect a click within a slide (user click to navigate from within a slide) and thereby register it as a valid module completion?
Thanks in advance folks,
Kind Regards,
Alex.

Hi Shubi,
Thanks for you quick reply.
Shubhi Shukla Dubey wrote:
Hi Alex,
Which LMS server you are using? Secondly what is the Setting in Quiz>Reporting tab is it SCORM 1.2,2004 or Aicc.
You want status on basis of user clicks then please make sure that Report data is set to "Slide view =100%" (or whatever precentage you want) and Report Pass/Fail set to "Complete/ Incomplete."
Thanks,
Shubhi
LMS = cornerstone on demand. It has been customised to suit the company requirements, Reporting tab is SCORM 1.2
To circumvent the issue I have changed the % view to 0% so in theory when the user launches even one slide / page - it will set it to report as status complete.
However this is not a viable solution on content critical modules....dont you think so?
Ideally I would like to get to the bottom of why a button within the module (which is able to navigate between pages) is not being able to report / set / increment the completion status counter.
Thanks and Kind Regards,
Alex.

Captivate 5 swf gallery animations looping e.g. wrong mark

Hi, I have used the wrong and correct marks from the Captivate swf animations gallery extensively in a Captivate 4 project. I have upgraded the project and now these animations loop rather than stop once the mark is drawn. I tried replacing them with the swf files in the Captivate 5 gallery and they have the same problem. They are still Actionscript 2... so perhaps that is the problem? The 'loop' checkbox in the Captivate Properties is shaded out.
Does anyone know of a fix this this?
Thankyou.

Hi,
So, do you mean if you use the "Wrong Mark.swf" from the following location, even that does not help:
C:\Program Files\Adobe\Adobe Captivate 5\Gallery\SWF Animation\Others
Thanks,
Sikandar

3G/UMTS even after 2.1 poor

My iPhone shows "3G" but while I try 2 open a website it changes 2 Edge while I'am in a very good supported UMTS aerea!! After new connecting (airplain mode) the phone finds again 3G/UMTS, but if I try 2 open (an other) site - same game again
A update 2 FW aint change this behavior!
The only change after installing 2.1 is - Safari crash more often:(
Is the Infinion chip sort of crab, or will FW 2.2 bring a advance???
This is (also) a - open - question @ apple!
Well I've 2 say it cristal clear - it ***** when first gen. IPones surf with the same speed (Edge) like my 3G in UMTS aereas and folks with a 2 jear UMTS phone surfing with UMTS speed- grining @ me!!
I hope 4 an explanation (@ Apple - u got my email adress)!!
Greetings from Frankfurt Main - Germany

TofuBrown wrote:
Is anyone still experiencing a laggy keyboard even after the 2.1 update? I'm still having problems when texting a typing emails...my keyboard just pauses and then will catch up.
Same as mate. Not as bad but the keyboard can't keep up with me.

Firefox cannot load websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!

Firefox cannot load ANY websites, but IE can, even after I tried all the ideas in the current articles on this topic as of March 10, 2011!
One day it was fine, and the next day it stopped working! I have tried everything suggested under the topic "Firefox cannot load websites but other programs can."

You should e able to install FlashPlayer separately on IE and Firefox. So you may use Flash 11.3 on IE and 11.2 or 10.3 on Firefox.
Work from the administrator account. First of all sort out Firefox, use the Adobe uninstaller to uninstall Flash before reinstalling 11.2 Afterwards check that IE is ok, the Uninstaller may have changed that so you may need to reinstall Flash on IE.
* see instructions in [[flash 11.3 crashes]]
You are apparently using an outdated Firefox 8. That is not secure you should update to the latest Release Firefox 13 (or within a day or so Firefox 14)
You may also encounter problems relating to use of RealPlayer software and that software may affect use of FlashPlayer 11.3
* see also [[Fix problems with RealPlayer add-ons]]
* a user ''blacksabath710'' recently posted a workaround in [/questions/931055] suggesting use of free software from http://www.dvdvideosoft.com/
P.S.
When you finish set Firefox's FlashPlayer not to upgrade, and until this issue is resolved do not follow suggestions from Adobe, or Plugincheck etc. to upgrade Flash.
Use this test page form Adobe in each browser and account to check Flash is working ok
* http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html
The test page will display version information and error messages or a Flash animation to prove flash is working.

Animation looping even after pause?

Similar Messages

Maybe you are looking for