Animation-need help: reverse clip order , different arrows in timeline

hey!
i am editing a puppetanimation and there are a few annoying things i really would like to know how to use better.
1.
i have 4000 pictures, sometimes i want to reverse the order of the pictures/clips. i checked making a own new file out of some pictures in a new sequence but i am scared that the quality is not the same. when i compare it with the normal photos then i can see a difference. so is there a easyer way? just chang quick the order. i can do it manual, but it is annoying.
and also i remember i did it some years before, but i do not remeber how.
2.
is there a other way just to zoom in the timeline? cause apple and normal plus dosn´t work.only if i push the "far away"(the other one) plus. with zooming out it works.
3.
very strange is that: when i copy a few pictures and i want to put them somewhere in the timeline, sometimes it showes me an arrow downwards and sometimes an arrow pointing to the right. i like the pointing to the right, cause then i do not delete the gap/break/"nothing" in the timeline. but also i need this arrow when i just move something and not only when i copy something.
oh i hope you understand....

i know i know.....it is not that annoying...just these few things. i want to go on with this programm...i know it , it works ... . there is not that much to do.just always checking the pictures and so on.
for me it is not about the question wich programm!
to make the question with the arrows more understandable: i want to put something big in a actually too smale gap. and i want that final cut notice this automaticly. it is not about animation. i would also want to know about this if i would have videomaterial and normal clips. and i know it is actually a simple thing.it is often about the shortcuts i do not know.
and also: i guess you noticed: my english is rubbish, so i did not get all of your explanations(do not tell me that i use the wrong forum, it is the only good one i can use)
Message was edited by: neverending
Message was edited by: neverending

Similar Messages

HOW TO?: Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Need help setting up 3 different iCloud accounts for my kids (so each has own iMessanger)using same Apple ID (mine) ....they don't have their own separate email addresses to work from...how do I do this?

Any devices connected to the same icloud account can sync all the data on that account. For this reason an icloud account is really for a single user.
On a mac, if each user has their own account, then the itunes for that mac account should be set up to connect to that user's icloud account (System preferences>icloud).

Needs help to know the different versions of forms with their compatibility

Needs help to know the different versions of forms with their compatibility with different databases and operating systems.
Kindly give the details or any suitable link for the same.
please consider it as on urgent basis.
regards,
rajesh

Rajesh,
the certification matrix is available on metalink.oracle.com. You need a support contract to access this information.
Frank

Need help on Production order confirmation cancel issue

Hi,
I need your help regarding Prduction Order issue.
We have created Production Order and issued raw materials and we done paritial confirmation also. Now the order status is PNCF.
After that we notice that it was wrong confirmation so we went CO13 we cancel those confirmations.
But in our zprogram still those order is showing as paritial confirmation order.
I need in which SAP table confirmation status stored and what will be the production order status after cancel the confirmation.
and in which table cancel production order confirmation data will be availiable.
please guide me
sateesh

HI,
There is No Standard Status for Reversing or cancelling the Confirmation.
Generally, When you confirm the status PCNF or CNF gets active.
When you reverse it theybecome inactive.
also let us know, whether You cancelled or reversed the confirmation or revesed the GI postings.
If you have reversed the GI postings using Reverse Movement type or Materail documents, it is possible to have the PCNF order status unchanged.
Regards
Ratan
Edited by: Ratan on Aug 28, 2009 7:23 PM

How to reverse clip order in timeline?

So I have a pretty lengthy project, and I want to take all the clips I have, and essentially just play them backwards. As in, I have ex: Clip A, Clip B, Clip C, Clip D, Clip E. And I want to reverse the entire order so it plays: Clip E, Clip D, Clip C, Clip B, Clip A. Is there a quick way to reverse the order of all the clips, instead of doing it one by one, which is extremely time consuming?

If I understand correctly, you want to reverse the order of the clips but not reverse the clips themselves.
There is a way to achieve what you want, in very few steps.
1) Select all the clips (click anywhere in the timeline, and hit Cmd-A for "select all").
Go to Modify->Retime->Reverse Clip.
[at the moment, you'll still have all the clips in the original position, but playing in reverse]
2) Select all the clips and press Option-G (or File->New Compound Clip). You will be asked to name this compound clip. Now select this compound clip and do a new Modify->Retime->Reverse Clip.
[now you have the order of the clips inside the compound reversed, and, since they had been reversed to begin with, they will now be playing forward].
3) If desired, you can "uncompound" ("break apart clip items") the compound clip, or leave it as is.
I am curious, though: why would you want to reverse the order of the clips in a "long" story? It does not seem to make much sense, storytelling-wise.

How to reverse clip order in FCP7 timeline?

I'd like to reverse the order of clips in my FCP7 timeline (NOT reversing each individual clip). I want to show some clips on the timeline and then immediatley play the same set of clips in reverse order (not each individual clip in reverse order).
Is there a way to reverse the order of the clips in the FCP7 timeline?
Thanks!

In other words, Meg, you're saying you don't know of any way to do what I'm talking about?
Of course I could manually place them in reverse order, one by one - but that's not what I asked about. I asked how to reverse the order of the clips.
To suggest manually rearranging the order of the clips in reverse would be like if someone asked how to reverse the play direction of one clip, and someone were to reply with a suggestion of rearranging the individual frames, one by one, until reverse playback of the clip were achieved.
Let me try to clarify for anyone else that may read this, to avoid further difficulty understanding what I'm saying....
I want to know how to take a series of clips that are on a timeline (i.e. Clips A, B, C, D, E, F), and get them to be put in the opposite order on the timeline (i.e. Clips F, E, D, C, B, A). I DO NOT WANT to manually rearrange the clips, NOR rearrange copies of the clips, NOR take the Clips from the bin and place them in reverse order on the timeline.
The point to my query is to avoid the time-consuming effort of manually placing clips in reverse order, if there is a way to do this (just like instead of taking a clip and painstakingly copy/paste each frame, one-by-one, in the opposite order of its natural way, you just Modify the Speed to Reverse).
Make sense?

LSMW - Need help with Sales Order (Modification VA01)

Hi,
I need help with an LSMW for Sales Order (VA01).
I need to do the following:
1. Copy the Standard Sales Order LSMW
2. They (users) would like to be able to pick the batch (lot) from the sales order.
3. Also, they would like to have functionality, where from the list of Sales Order numbers, they would be able to switch one part number for another.
Please help with the above 3 needs.
Thanks,
Laura

Hi
Run transaction SE38, insert your program (RVINVB10), select DOCUMENTATION option and press display
Just only you need to consider the BDC program needs to read afile with all informations to create a sales order, so you have to create a program to prepare a file arraged as RVINVB10 needs, the documentaion explains how the file has to be created.
Max

Need help deciding between two different Zen products [micro vs ... micr

Hey all,
Just bought a black zen micro last Wednesday and am loving it. Bought it from Best Buy and splurged on the extra protection plan. Unfortunatlly, after a trip to Fry's today, I'm questioning my impulse buy.
At Fry's they have two different box sets of Zen Micros. One small one, like the one I got at Best Buy, with the player/battery, headphones, usb cable and smooth little pouch. But they also had a larger box with player/battery, headphones, usb cable, smooth little pouch AND an AC charger (and I'm not sure, but possibly a second battery?). I am assuming that this large box with more items (but still the same $99 price) is an older box. What I'm wondering is if there is any difference between the players in the two boxes. If there is not a difference, then I'm going back to Best Buy to get a refund and get one of the boxes at Fry's that has the charger with it (a much needed accessory for my uses). Of course, if the players do differ, I would have to find out in what way and weigh my option to keep what I have or return it and base a decision on that. That, of course, is what prompted this post.
I know some players just can't help but be deffecti've, does this older box contain a series with a higher rate of returns? Does it look different (I really like the way the back lighting looks on mine)? Anyone have experience with one of the older boxed sets and one of the newer ones (bought one, then another for S.O.)?
I'm already leaning towards return, but I just wanted to check with other creative users before I made my final decision.
Thanks,
-Jonathan

There is no difference in the operation of the players. The very early Micros had the word "BACK" on the return button, the newer version just has a left pointing arrow. Supposedly, the newest units have a revision to the headphone jack, but there is no way of telling if you have the better or worse jack. The large box will also have the holder with the belt clip and stand. The Limited Edition has the extra battery, and is clearly marked with a sticker on the front of the box that says "Limited Edition FREE Extra Battery for 24 Hour Playtime. Some people say that the backlighting is different with the newer units, I dont know. The large box IS the older retail version. Hope this helps you.

Need help in sales order creation

How to create a sales order ,invoice,credit memo
step by step.

Hi,
SD Flow Cycle:
INQUIRY ( VA11)
|
QUOTATION (VA21)
|
PURCHASE ORDER (ME21)
|
ORDER CONFIRMATION (VA01)
|
PICKING LIST (VL36)
|
PACKING LIST - (VL02, VL01)
|
SHIPPING (VT01)
|
INVOICE (VF21, VF01)
|
AR
SALES ORDER PROCESSING
Creating Sales Order - VA01
Maintaining a Sales Order - VA02
Displaying a Sales Order - VA03
Releasing an Order or Delivery from Credit Hold: Non-Flooring - VKM1
Display List of RMAs by Customer - VA05
Confirm RMA Goods Receipt - VL02
Generate list of open return orders for deletion - VA05
Display Customer returns eligibility - MCSI
Removing a Billing Block (Approving Credit/Debit Requests) - V.23
SHIPPING
Creating a Delivery - VL01N
Displaying a Delivery - VL03N
Changing a Delivery - VL02N
Shipment Inquiry / Display - VT03
Adjusting Transfer Order - Confirmation Quantity - LT12
Collectively Confirm Transfer Order - LT25
Batch Shipment Confirmation - VL19
PGI Reversal Cancellation - VL09
Creating Service Provider/Carrier Master Data - XK01
Maintaining Serive Provider/Carrier Master Data - XK02
Displaying Service Provider/Carrier Master Data - XK03
Maintaining Product Master/Serial # Profile/Unit of Measure/Shipping Unit - MM02
IDoc Inquiry - WE02 / WE05
BILLING
Invoicing a Customer Shipment - VF01
Reprinting an Invoice - VF31
Releasing a Sales Order for Billing - V.23
Creating an Invoice by Using the Billing Due List - VF04
Checking Open Billing Documents - VF05
Create Credit/Debit Memo - FB01
Please Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Need help in the order Freezing

Hi SD Friends
One of my sales order needs to be blocked (It has 2 line items). That means user does not need this order anymore. But they don't want to delete the order physically from database.
In this case, I have rejected the both line items. And the entire order status becomes completed. But the delete option is still active.
Then, I have selected the order reason (Blocking) in the header level. Delete is still active.
I want to prevent this order from this delete option.
How to freeze the order after rejection of all items?
OR how to disable the delete option in the above scenario.
Please help !!
Regards
Priyan

Thanks Mani S
Do you have any samle code (user exit) for this activity.
Please share with me !!
Regards
Priyan

Need help in Sales order Header Details

Hellp Experts,
I need to modify data on 'Additional Info B' in Sales Order Header (VA03 Transaction) . As it is a Standard program I am aware that we have to use user Exits. But before that I have to debug the code to that point. I wish to know info from where a particular data is coming in the field (End User). How should I proceed for debugging? Can anybody help me?
Moderators,
I could n't found any similar question when searcher. If it is can you please provide me the links?
Best Regards,
Harish
Moderator message: debugging is standard developer practice, enhancement of this screen has been discussed many times, it seems you did not look in the right places.
Edited by: Thomas Zloch on Nov 30, 2010 5:48 PM

Hi Harish,
Perhaps have a look at the following thread...
Additional Data B tab blank in VA01
Have a look at some of the includes mentioned in the thread and if you don't find the information there, you should at least be pointed in the right direction.
Kind Regards,
Richard.

Need help:How to realize different prices for different quantity in CCM2.0?

Hello,
I'm in process of establishing catalog with CCM2.0 for our company. There is a user request to realize different prices for same item when user buying different quantity. Can you help me how I can realize this?
Thanks a lot,
Elly

Hi,
Is there somebody can help me? I really need this to be addressed ASAP...
Thanks a lot!
Elly

Need help resizing pages for different screens

Hey guys,
Ok well I made this website that has a lot of pages now and
the only problem is that I have a 21" widescreen monitor so
everything I created has to be scrolled on a lot of smaller
screens. I'm almost possitive that there is a way to tell the html
to resize the website when different screen sizes are detected. Any
help would be great. Thanks.
Also if there is a way to do this, then would it be possible
to change the settings sitewide without using templates?
Jeremy

> I'm almost possitive that there is a way
> to tell the html to resize the website when different
screen sizes are
> detected. Any help would be great. Thanks.
There is - it's called "design"! You have to build the page
to be
flexible - see this tutorial as an example of how to do it
with tables:
http://www.dwfaq.com/tutorials/Tables/flexible_tables.asp
Once you have the page built, you cannot just drop in a magic
pill and make
it resize itself.
And remember, screen size is not the real variable you need
to worry about -
it's browser viewport size. Even when you know my screen is
1280x1024, you
still do not know what my browser size is.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dayencom" <[email protected]> wrote in
message
news:eiqmfu$33q$[email protected]..
> Hey guys,
>
> Ok well I made this website that has a lot of pages now
and the only
> problem
> is that I have a 21" widescreen monitor so everything I
created has to be
> scrolled on a lot of smaller screens. I'm almost
possitive that there is a
> way
> to tell the html to resize the website when different
screen sizes are
> detected. Any help would be great. Thanks.
>
> Also if there is a way to do this, then would it be
possible to change the
> settings sitewide without using templates?
>
> Jeremy
>

Need help on open orders reporting

Hello All,
I Need some information on Open Orders and turnover in bw.
I have a requirement Like thi.Please any one provide me logic, which fields i have to take and which fields i have to ristrict for this Reporting.Please find the fields and give me caliculations and ristrictions.
1,Open orders 0-3 months
2, Open orders 4-6 months
3,Turnover past 12 months
4,Open orders >6 months
5,Trdae receivables
7Metal Exposure
Thanks in Advance.
Raju.

My suggestions,
Have a look at your cube and understand the field available -
1,Open orders 0-3 months - Document no where status is open and creation date is in last 3 months. Restrict sales key figure on status and creation date.
2, Open orders 4-6 months - Document no where status is open and creation date is in last 3 months. Restrict sales key figure on status and creation date.
3,Turnover past 12 months - Sales of last one year - restict sales on doc date (last 12 months)
4,Open orders >6 months - Document no where status is open and creation date is in last 3 months. Restrict sales key figure on status and creation date.
5,Trdae receivables - sum(check out the field in cube)
7Metal Exposure - sum (check out the field in cube) and restrict it to Metal
Hope it helps
Vikash

Need help on sales order confirmation out put type

Hi Team,
Please help on this issue.
In our sales document types order confirmation is happening through the inboud idoc, user requrement is once order is confirmed immediately sales order confirmation output type should send sucessfully, but the problem is
Inbound idoc is using the sales order and blocking at the same time RSNAST program is using this sales order for sending the output type but not able to send due to the sales order is blocked by inbound idoc.
Could you some body help me on this how can we proceed on this.
thanks & Regards,
MK.

Check the Dispatch time of the Output type in transaction code :NACE. You need not execute RSNAST00, if the despatch time is set to 3 ( Send with application own transaction ) or 4 (Send Immediately). The output will trigger automatically after the sales order is saved.

Animation-need help: reverse clip order , different arrows in timeline

Similar Messages

Maybe you are looking for