Animation symbols not running smoothly in interactive pdf

I created an animated symbol on flash and placing it on the interactive pdf has been quite successful, except it does not animate as smoothly as I hoped it would.
Instead of looping a smooth animation on its own it requires the mouse to be hovered over the element area in a kind of sweeping motion in order for it to play keyframes, and sometimes with relatively smooth success and other times not. I've tried running the pdf in adobe reader in different computers and achieve the same results.
It was made for the NavCardSelected instance and the symbol itself is a relatively simple 'growing vine' animation, if that helps elaborate any more. Anyone have some kind of workaround to this?

I would check the Flash/SWF code to see if it requires any special events to be sent.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Thu, 26 Jan 2012 22:26:58 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: animation symbols not running smoothly in interactive pdf
animation symbols not running smoothly in interactive pdf
created by michpan<http://forums.adobe.com/people/michpan> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4168230#4168230

Similar Messages

  • Videobackground in menu not running smoothly

    I created 3 menus with a video as background. (rendered QT in AE)
    in one menu the video is running not smooth and even jump or stops.
    What can I do ? Are there this I need to avoid ?
    Thanks for your help.

    I would check the Flash/SWF code to see if it requires any special events to be sent.
    From: Adobe Forums <[email protected]<mailto:[email protected]>>
    Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
    Date: Thu, 26 Jan 2012 22:26:58 -0800
    To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
    Subject: animation symbols not running smoothly in interactive pdf
    animation symbols not running smoothly in interactive pdf
    created by michpan<http://forums.adobe.com/people/michpan> in Acrobat SDK - View the full discussion<http://forums.adobe.com/message/4168230#4168230

  • OS X Mavericks 10.9.3 Does Not Run Smoothly

    Hi,
    I just upgraded my iMac and MBP from the Mac OS X ML 10.8.5 to the latest OS X Mavericks 10.9.3.
    The new system does not run smoothly.
    No matter it's the iMac or the MBP, the screen freezes for a very short of time whenever I try to switch to a different running program(especially when I try to switch to other programs from the Safari).
    So what's causing the problem? What should I do about it?
    Thanks.
    Ed

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
    SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
    View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    ☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    ☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Videos do not run smoothly but audio does and I get a scripts message

    When I try to watch a video from a certain site it is jumpy and does not run smoothly although the audio does. I get a message about scripts but so not know what to do.

    {Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
    http://kb.mozillazine.org/Problems_printing_web_pages

  • Videos do not run smoothly, constantly loading

    videos do not run smoothly,05 seconds at a clip and with stops to reload, constantly reloading. Running Windows XP , seems to have been aggravated with version 4.0 All videos start and then stop cold within 10 seconds

    Hi,
    no change.
    I tried to run the videos with other browsers (Internet Explorer and Safari) -> no change. I tried to change the adjustment in the control panel -> no change.
    Other suggestions?
    Harry

  • IDVD output video is not running smooth

    Hello, I am having a problem with IDVD.
    When I burn or just safe the VIDEO_TS and AUDIO_TS folders on the HDD, the result is bad.
    Any video on the DVD is not running smooth, like when it is played on the computer.
    I have a MBP with a. 2.2 core duo, and it should have enough horsepowers for the task.
    The DVD-menu is running as it should, but the video is bad, though the original quality is fine.
    What can I do?
    Bjørn Sørensen

    The settings are PAL, as it is for European dvd-players, and the problem seems to be that Imovie exports m4v files, which iDVD needs to convert "do not know why?" into mp4 or something similar, this causes the video to run improperly, "lacking" where it was supposed to run smooth. I do nok know what to do about this. Visual hub does the exact same thing to the video.

  • Expose' is not running smoothly

    I just noticed that my expose' is not running smoothly. I have it set to "all windows" in one corner and "desktop" in another. when I use either the windows slide away jerky and return jerky not smooth and fast like before.
    I haven't installed anything new lately.

    I've had this problem for months now. I got this machine back in Nov 2009 and for the first 7 or so months ran flawlessly even under heavy use.
    Now, even with just 1 safari page and 1 finder window open, you get the impression expose is really struggling to handle it's smooth transitions. Oddly, it only expose that seems to have this issue, no problems with the dashboard, and no problems with pulling the cursor down to reveal the hidden dock.
    I wasn't too alarmed at first as I thought it was something that would get resolved with an update at some point. Although this has not addressed yet and there seems to be no solution found anywhere.

  • Premiere CS6 not running smoothly.

    Alright all, I'm stumped.  I was running Premiere CS6 via the Cloud membership, everything was going perfectly, I had started new projects and even transferred one over I was using in CS5.5 and had no problems.  Then suddenly, my CS6 is not running smoothly.  The footage lags, the timecode for the timeline isn't smooth, and the program in general is a little rough.  But the sound plays perfect with any footage in the timeline.  I pull the same footage back in 5.5 and it works flawlessly.  Cleaned the Cache, deleted and reinstalled CS6 and ran all updates, still having the same problem.  Any ideas?

    >have 1 500gb SATA drive, but I also use a variety of External HD as a scratch
    eSata or USB or ??? externals?
    Slow external drives can cause problems... also only having one internal hard drive
    Some reading...
    My 3 hard drives for AVCHD video editing are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and ALL program installs (2)
    2 - 320Gig data for Win7 paging swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folders and files
    3 - 1Terabyte data for all video files... input & output files (1)
    (1) for faster input/output with 4 drives
    - use drive 3 for all source files
    - use drive 4 for all output files
    (2) only 60Gig used, for Win7 & CS5 MC & MS Office & other smaller programs
    Search Microsoft to find out how to redirect your Windows paging swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    I do not use RAID... AVCHD is CPU intensive, not drive intensive like uncompressed, so I have no problems editing without RAID (but, this is for "simple" home videos)
    http://www.video2brain.com/en/videos-5353.htm
    http://forums.adobe.com/thread/784220?tstart=0
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything

  • PPro CC, some video frames do not run smoothly

    I am running Window 7 and using a Canon 5D II to run short movie clips.  I have NVIDIA card and when creating a video some of the frames (clips) do not run smoothly.  I am very new to Premiere Pro so I need simple explanation of what could be wrong.  Thank you for helping me!!
    Suzy

    Hi there,
    why should someone tell you what to do? You already posted the resolution (maybe without knowing it)
    > Wenn I install windows clean again and then play this video then he wil work properly, after i install word,exel,my printer,virusdriver and so on, then the video will not work anymore smootly.
    So, if you install applications, then usually the system performances drops, due to freshly installed services, tools in the systemtray or background applications which all is coming with that stuff
    (word,exel,my printer,virusdriver) you mentioned.
    So in my honest opinion, I suggest you reinstalling your system, and then do the following:
    install at first ONE application (e.g. office) and try to play your video. Should the video run smoothly then continue installing the next software (like anti-virus) and check it again.
    If the video runs smoothly after every new installed software, continue installing the next one.
    But if you recognize, that the video begins running with stuttering and slower speed, then the last application youve installed is the software which uses too much system resources.
    If you find out which application causes the video running not so smoothly, then try to find an alternative software which does not need so much system-power from your computer.
    Greets

  • Firefox does not run smooth while loading websites.

    Firefox does not work smoothly when it is loading any webpage. Specially, when I open new tabs and load new websites while it is still loading last website in other tab, the situation becomes worse. Main problems that occur are - page will not scroll, or scrolling hangs for a sec or so, works a little bit and it happens repeatedly, new tabs will open but not smoothly, website loading also gets affected in similar way. The dot that revolves on tabs while loading any webpage gets really annoying. It revolves intermittently. Imagine a car engine not starting, it starts, stops, starts, stops. That's what happens with Firefox. But once all webpages are completely loaded and scrolled 2 or 3 times from top to bottom of the page, then it is all good. All the problems occur when page is still loading in fore- or background in any or all of the tabs. I tried to run Firefox with all add-on and plugins disabled, tried to refresh Firefox from troubleshoot information. But nothing helps. I even uninstalled and reinstalled Firefox. I guess my laptop is not having memory issues. I am using Windows 7 x64 based system. RAM is 4 GB. All other software work well. Most importantly, Chrome has no such issues in comparison to Firefox. Also, when IDM (internet download manager) takes over some downloads, the Firefox hangs for few seconds. Please help.
    Thank you.

    You can try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    You need to close and restart Firefox after toggling this setting.
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://support.mozilla.org/kb/upgrade-graphics-drivers-use-hardware-acceleration
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window

  • Timewarp / time remapping not running smoothly?

    Hi, I've got a problem with speed variation. I got 25fps exr footage rendered out of 3ds max which I want to add some speed variation to it in AE. The problem I'm facing is the footage stutters when using time remapping. basically what I was trying to do was to render the scene out very slow so I can crank it up  in AE. I've even tried different blending modes (pixel motion).
    Here is what happens when  trying to add some speed variation (when  slowing it down to the footage initial speed)
    1. time remapping causes stuttering.
    2. while timewarp gives strange interpolation errors (looks like blurring error) speed goes like 100-->150-->100 and errors occurs when going back to 100
    system:
    windows 7 64bit, i7 2600k, 3,4GhZ, 16GB RAM, Geforce GTX 580
    AE CS5.5

    this  1 got timewarp ( and speed is cranked up, not slowed down)
    thats the interpolation frame
    that's without timewarp
    time remapping brings same error but for  RPF files looks like it works for EXR
    looks like stuttering is not a problem anymore. i ran  another random speed variation test and it'd run smooth. Have to double check it with the intended speed variation
    I'll try to post a   similar project where file size is smaller

  • HD video does not run smoothly in Premiere Elements 7

    I have been using Premiere Elements 7 to edit short videos for a couple years now with my standard definition camcorder. I recently bought an HD camcorder. It is impossible to edit these videos in the timeline as they don't run smoothly at all. The raw videos themselves play perfectly but not in Premiere. How can I fix this? Is there a way to lower the quality of the videos temporarily in the timeline just so I can edit them with the finished product being in HD?Will upgrading to Elements 10 fix the problem?

    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
    Report back with the codec details of your file, use the programs below... a screen shot works well to SHOW people what you are doing
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    How are your hard drives configured?
    My 3 hard drives are configured as...
    1 - 320Gig Boot for Win7 64bit Pro and all program installs
    2 - 320Gig data for Win7 swap file and video project files
    When I create a project on #2 drive, the various work files follow,
    so my boot drive is not used for the media cache folder and files
    3 - 1Terabyte data for all video files... input & output files (*)
    (*) for 4 drives, drive 3 all source files & drive 4 all output files
    Search Microsoft to find out how to redirect your Windows swap file
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US
    Trying to use only ONE Hard Drive for Video Editing
    You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various parts of the hard drive to do Windows housekeeping or to load program segments for various functions
    Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle... this would be doing something with your video file at the same time as all the other work
    You as a person cannot do both at the same time with the same hand
    A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video editing
    You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708 for more) with Windows (or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
    I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in the space available on my office desk!) so I use the three drives that will fit
    Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
    Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208 and Jim Simon in the Premiere Pro forum http://forums.adobe.com/thread/856433 use USB externals for editing
    A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but eSata DOES have a fast enough data transfer for video editing... I have not used the eSata Dock below... for reference only, YMMV and all the usual disclaimers
    http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t

  • Flash Player 9 Not Running Smoothly

    My problem is I have recently installed Macromedia Flash
    Player 9.0.16.0 and as soon as I attempt to play a streaming video,
    the Flash Player begins to pause for a few seconds before
    proceeding with the video. These interruptions continue every 5-10
    seconds throughout the video play.
    I believe these pauses may be caused by insuffient memory
    being assigned to the browser and so it has to intermittently load
    more data into memory before the video can continue. I have
    presumed that the video is fully loaded before Macromedia Flash
    Player begins to display the picture...but maybe not.
    Please advise on how I can assure that the streaming video is
    fully loaded so that it will run smoothly without pausing.
    I utilize Netscape, Internet Explorer or Safari to access
    internet. I have tried all three browsers in attempting to run the
    streaming video without interrruption and all three produce the
    same jagged result.
    Thank you for your assistance in this matter.
    icer58

    It might be helpful to uninstall, then reinstall Flash.
    Go here to get the latest version of Flash. Before you install the new plug-in, uninstall the older one. You can do this with this Adobe Uninstaller.
    When the uninstall/reinstall is complete, Safari automatically opens to the Adobe Flash page confirming the plug-in was correctly installed.
    Quit Safari and "repair permissions" using Disk Utility in the Utilities folder.
    Post back.

  • PC user not able to print interactive PDF

    Hi,
    We have an interactive pdf that was created in Indesign CS6 on a Mac. OS X10.8.5. It prints fine on all our printers. But our PC users either get an error message that they need to choose a printer, printer not found, or it prints mostly blank pages.
    This is what one PC user told me... "If I indicate to print page 1 only.  It prints with no problem.  If I indicate, pages 1 through 5 or 2 through 5, I get a prompt that says unable to start print job, is printer available...and then a blank page comes out.  My printer is a HP Photosmart 8250."
    Something about the interactive PDF not working on a non-postscript printer?
    What's up, please help.....
    Thanks in advance.
    Sudi H Scott

    Thanks Dov. But because there are 40,000 people viewing these documents, we have no control over what kind of printer or version of Reader they are using. So it is our responsibility to make sure that the documents can print for everyone. We found that the buttons that were provided in CS InDesign 5.5 did not work when used in CS 6. I tried looking for days through other forums and Adobe help sections. So this bug needs to be reported to Adobe and worked out by them. We are moving towards interactive books - some that are 200 pages.
    We deleted all buttons on the master pages and used only the line of copy as hyperlinks, and so far that seems to have worked... we printed the entire book on as many old chunck-a-chunck printers we could find and the problem was solved. If you check the link to these documents by mid week next week, the new files should be posted. We provide the final files to our client and they post it on their website for their employees to view and print out as needed.
    Thanks agian everyone for your assitance in trying to figure this issue out. It was a mind blower.

  • Is it normal for my new Ipad to not run smoothly?

    i just got my new ipad and it is not really running smoothly..is it normal? and accidently drop it ..-_- .. bummer..im worried that something might happen.panicking here..its my first ipad ..

    Yes it is a Facebook server problem.

Maybe you are looking for