Animation workflow query

Hi!
I'm just nailing down the workflow of a short animation I'm making, and require a little bit of light shed on the situation.
The broad workflow is:
1: Each shot of the animation will be created in After Effects
2: Render a Master and an Offline version of each shot
3: Perform offline cut in FCP
4: Re-link offline cut to Master files
5: Grade in Color, send back to FCP
6: Export final mastered video
Specifically, I just want to run through the Color/onlining part of the workflow.
I was thinking the best Master version of each shot would be a tiff image sequence - but is there a better alternative re: working in Color?
Should I convert my image sequences to Pro Res 444 movies, and then use those as the Master files for sending to Color?
Presumably I could then render out a Pro Res 444 graded video from Color, then send this back to FCP for the final video with sound?
Many thanks for any help offered
Will

Depending on the speed (Bitrate) that your system can support (and your version of FCP/COLOR, but you must be on 7/1.5 if you're talking about 4:4:4:4 ProRes), the TIFF sequence might make a couple of percent difference in the final analysis -- and this might be important if you are prepping this for a film-out.
If your final deliverable is Quicktime/Web or videotape, you are wasting your time, resources and patience going the TIFF sequence route and you will find the ProRes trip far easier to manage.
Beware that you will likely encounter a lot of gamma coefficient issues no matter what route you choose.
jPo

Similar Messages

AE cs5 and 2d animation workflow?

I have been searching for how to add AE cs5 to an classical 2d animation workflow and I have found only one vid tut. Are there any AE cs5 forums that talks about this on the internet? Have yopu seen some cool vids working with this workflow (AE cs5 and classsical 2d animation) please post their links?
Any links, videos, books, courses would be appricated.
John

> Do you have any links of videos showing any of these proceses.
This is a difficult way to get help. If I may use a metaphor...
On this forum, we are good at teaching you how to use the steering wheel, gear shift, pedals, and so on in your car. Some of us have driven enough or know enough about the car to be able to tell you how best to use a combination of accelerator, emergency brake, and steering to perform a drifitng turn around a hairpin curve or best get the car up a steep grade. But asking if we know of any specifically written out turn-by-turn directions to get from the east coast of North America to the west coast of North America is a bit out of our scope---and still a very vague request. I can tell you certainly that you can do it by car, but I can't and won't write out the directions.
To leave the metaphor behind: Yes, After Effects can be and is used in making 2D animations. Many of them.
It seems that if you were familiar with the basic features of After Effects, you would be better able to ask questions that would help us to help you to get where you are going.
We want to help. In that spirit, I ask that you start here, and learn enough to know what After Effects can do and what you still have specific questions about:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

Help required with animation workflow

Hello!
I am embarking on my own private animation project, have almost neared the end of storyboarding, and am now sorting out the workflow. The finer points of which I am slightly hazy on, and would be deeply grateful for any insight that can be offered.
In terms of broad brush strokes, the workflow is this:
1. Begin with handpainted artwork
2. Scan in, and create individual elements using Photoshop
3. Import into After Effects and animate
4. Export from AE as HD media
5. Import offline media into FCP
6. Complete offline edit in FCP
7. Online grade in Color
8. Export graded image sequence from Color and
9. Export graded HD movie back into FCP to...
10. sync to completed sound and export final movie into various sizes and formats.
(The reason for also exporting an image sequence from Color is for the slim and distant possibility of going for a film-out.)
It's the finer points of _format of exchange_ between these stages that I'm getting tied up in knots over.
Originally I thought exporting image sequences from AE would be the best bet. I would then transcode to ProRes 422 for the offline, use *Cinema Tools* to keep track of this relationship, and to then co-ordinate the online into Color.
However, as I understand it, for Cinema Tools to work properly with the image sequence coming out of AE (i.e. the 'film negative'), it would need timecode. Yet I am deeply unsure if an image sequence can have timecode. While an image sequence file name would store frame numbers, could Cinema Tools work with just these?
This led me to consider the plug-in 'Glue Tools' and using the DPX format for exporting out of AE, which I believe would allow me to use timecode properly.
Or, am I just over complicating the whole process?
Should I just export out of AE as some 24p format, perform an offline with a ProRes 422, then using Media Manager simply create a duplicate of the project once a final cut is done and relink the clips to the original 24p video?
My experience in film so far has always been with a tapeless workflow, first with the RED camera then Genesis, and I've always left before the online.
So as I say, any insight offered would be a great help!
Apologies if this shouldn't be in the Cinema Tools forum, I will repost in another if more apt.
Many Thanks
Will Snow.

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Character animation workflow between AE, PS, and PP. Help!

I just finished my first animation test. Please check here:
http://www.youtube.com/watch?v=GN7Xjzxi568
My general workflow... (Creative Suite 5 on a 2011 27" iMac 2.7GHz quad-core Intel Core i5, 4 GB RAM, 1 TB 7200rpm HD, AMD Radeon HD 6770M w/ 512 MB)
The character is created in PS. I draw the character and then cut out each body part as a separate layer to make a puppet for animation in AE. Since I am making my characters in PS, I need very large files because I may want a close up on the characters face for instance. The .psd that I import into AE is around 7000x7000 file.
As you can see in my video, my backgrounds are video. I am using a Canon 5DII shooting 24fps @ 1080p.
Let's just say I had many, many issues getting the video above to work. I don't want to recount what I did as it was most likely the wrong way to do it.
My question is, what should my workflow be?
Should I cut the background video in Premiere Pro, and then do a dynamic link between PP and AE, do my animation on top of the cut video sent from PP, and then send it back to PP after I'm done?
ALSO, the 18 second video above took around 2 hours to export. My final output is always 720p, so should I be batch converting all my video before hand to 720p as it will make editing and exporiting a lot faster? Will adding RAM to my computer make rendering/exporting faster, or will that just give me general performance increase? It's only about $100 to upgrade to 16GB of RAM and I should probably get on that. Or is rendering/exporting only reliatn on the CPU/GPU?

My good friend Angie Taylor is one of the best at this style of animation and she has put up a bunch of free tutorials. You can find them with a quick Google search. This is one of my favorites. It shows you how to tie all of the body parts to a single control layer so that you can simplify the animation procedure and speed up your workflow. You should also check out her blog.

Program Workflow Query

Thanks for reading!
As a self-taught web designer, I have always used a basic text editor to accomplish my work. I've had cloud for nearly a year and have only dabbled slightly in Adobe Muse before returning to my usual ways.
I'd really like to start getting to use the web design software, and as an animator by education, Edge Animate really appeals to me. What I am struggling with though is the basic workflow I should be adoptiong when trying to use all these programs in any particular project?
Should I be starting in Dreamweaver? I heard Muse was supposed to be a sort of brainstorming type of program so should that come first?
Say for example I am creating an inventory system using PHP and MySQL, where should I start? And would this workflow change with different genres of site, say, for example, an artist's portfolio?
I apologise if it sounds dumb, but I just don't know where to start!

Muchas gracias señora!
One question. Would I design the original layout in DW and export it to Edge Animate then back in again? Or just create the edge animate composition separately? I guess either way round is fine?
I am actually designing an inventory system in PHP/MySQL atm, most of it with textwrangler on the mac, would it be wise to import it into Dreamweaver and continue from there?
Thanks again!
P.S.
I used Muse once, it was awful

5D Workflow Query

I'm trying to work out the best workflow that will allow me to import 1080P H.264 QTs shot on 5D mkII, carry out my VFX work then export the finished 1080P shots with the least amount of compression ready to conform with non VFX & online. The animation or uncompressed YUV codecs would presumably have the least or no compression but they seems to produce a large file size that is clearly unnecessary when compared to the file size of the source QT. I'm concerned however that if I use the H.264 codec even with a sufficient data rate that I could still introduce compression artefacts into my shots. I don't necessarily want to open a can or worms with codecs etc but am just looking for some advice on codecs/workflows that are working for people right now who are in the same boat.
Thanks!

Hi Dave,
Thanks for your response, I edit with Avid MC6, then once my frame ranges are confirmed I import the appropriate source QT that was shot on the 5D mkii into AE & trim my work area to the required frame range. I carry out any number & variety of VFX tasks but the actual processing speed of the application is not a major worry for me. It's when I then come to export the finished product that I am unsure about.
When you say "you may be better served by getting out of H.264 as soon a possible" I had been given some advice about creating image sequences (.exr or .dpx) from the H.264 QTs & then to use them to work with in AE to avoid further compression but I didn't really understand that at the time. So in layman's terms it sounds like AE can struggle when working with footage compressed with codecs syuch as H.264 & if the footage is converted & then imported as an image sequence instead these compression issues are irradicated as in theory there is no longer any codec in the workflow at this point, correct?
When it comes to exporting the finished shot then, to avoid an unwanted compression am I restricted to using codecs such as animation or uncompressed YUV or is there someway that I can somehow I can use a codec to try & match the true data rate of the information contained in the shot? Or once the original H.264 QT has been converted to the image sequence have I in effect reset the compression status of the shot with any previous compression artefacts now basically burnt in to the image?
These may well be basic compression questions but it's only recently that I have been required to produce shots that are to be used to online with, I've been more in the offline relm so these issues aren't as critical.
I hope I'm making sense with this.
Thanks
James

InDesign hängt sich auf bei Animation / Workflow?

Hardware:
iMac 27", Bj Ende 2012
Prozessor 3,4 GHz Intel Core i7,
Speicher 32 GB 1600 MHz DDR3,
Grafikkarte NVIDIA GeForce GTX 680MX 2048 MB
System: OS X 10.8.5 (12F45)
Software: CreativeCloud für Teams /InDesign CC 2014
Hallo,
ich habe für eine Präsentation eine animierte Anfangssequenz in InDesign CC gebastelt, die ich gerne anschließend in ein PDF integrieren möchte und die idealerweise auch so aufbereitet sein sollte, das sie auf mein iPad kopiert und dort auch zur Präsentation abgespielt werden kann!
Ausserdem möchte ich diese Präsentation digital verschicken, sodass sie von den Empfängern sowohl unter OS X als auch unter Windows sauber abgespielt werden kann!
Im InDesign hatte ich nach kurzer Zeit das Problem, dass sich das Programm ständig aufhängt, sobald ich eines der zu animierenden Elemente anklicke. InDesign kann dann nur noch durch "Programme sofort beenden" beendet werden!!!
Die Reparatur der Zuggriffsrechte, Programm-Neustarts und auch Neustarts des Rechners bringen nichts. Ich habe auch bereits mehrfach die Datei neu aufgebaut, wofür ich für alle animierten Elemente die entsprechenden Animationseinstellungen wieder mühsam neu ermitteln musste, das hat aber jeweils nur kurzzeitig geholfen und schlussendlich hängt sich das Programm immer wieder komplett auf!
Ganz, ganz selten kommt es vor, dass ich in der Lage bin, Objekte anzuklicken, die Animationseinstellungen zu modifizieren und die Animation zu exportieren.
Wovon das abhängt, dass es es manchmal doch funktioniert, weiss ich nicht.
Ausserdem würde ich gerne Audio in die Animationssequenz integrieren. Ich habe aber leider keine Möglichkeit gefunden, Einzelelemente und dazugehörige Geräusche parallel und zeitlich exakt aufeinander abgestimmt ablaufen zu lassen. Soweit ich gesehen habe, bietet InDesign keine exakte Zeitleiste wie z.B. Photoshop für die Videobearbeitung. Oder habe ich nur die korrekte Einstellung nicht gefunden?
Da ich die exportierte swf-Datei nachvertonen musste, sich das swf-Format in keinem mir bekannten Programm öffenen und bearbeiten ließ, habe ich es in meiner Not über ein ScreenCapture-Programm in mp4 gewandelt und dann anschließend in Photoshop nachvertont. Dadurch wurden allerdings die verwendeten und als Pfade exportierten Schriften ganz übel aufgepixelt!!!
Gibt es einen Möglichkeit diese Animation mit CC-Apps sauber zu vertonen, die sauberen Pfad-Schriften zu erhalten, die Animation in ein PDF zu integrieren und das Endprodukt in ein Dateiformat zu bekommen, das ich auf meine iPad kopieren (womit???) und dort auch abspielen kann???!!!
Ich habe auch schon versucht exportierte fla's in Flash zu öffnen und dort weiterzubearbeiten, das hat aber auch nicht geklappt (allerdings kann das auch daran liegen, dass ich mich in Flash kaum auskenne)
Vielen Dank
Sigi Dannecker

Sorry für den Sarkasmus, aber schon wenn man deine Anforderungen liest, kann das nix werden. Du suchst nach der "eierlegenden Wollmichsau", gehst dabei aber vor, wie ein Chirurg mit der Kettensäge. Ja, in InDesign ist Animation rein ereignisbasiert - eben wie PowerPoint und es geht eben nur bis zu einem gewissen Punkt. Man würde ja auch keine Kinofilme in PowerPoint animieren. Genau so macht es Null Sinn, mit Flash-Dateien rumzuhantieren oder groß was von interaktiven PDFs zu schwurbeln, wenn das ganze auch auf Mobilgeräten laufen soll, wo sowas von Haus aus schon nicht geht. Bestenfalls könntest du mit dem App Packager eine iOS-App oder ein interaktives ePub direkt aus ID erzeugen, aber das war's dann auch schon. Also um's mal auf den Punkt zu bringen: Der ganze Workflow ist Kacke. Bevor du noch mehr Zeit mit diesen Hacks verschwendest, würde ich mir mal 'ne klare Strategie zurechtlegen. Wenn eine klassische Videodatei als Output für alles reicht, dann ist natürlich After Effects oder Photoshop ganz klar vorn dabei, ansonsten müßte man schon mal Flash Pro, Edge Animate, Captivate bis hin zu iOS-spezifischen Apps wie Keynote oder das neue Adobe Slate ins Auge fassen. Auf jeden Fall wirst du in letzterem Fall nicht umhin kommen, spezifische Versionen für verschiedene plattformen zu erstellen. Auch wenn Adobe was anderes glauben machen will, ist das mit dem "universal Publishing!" nicht so einfach.
Mylenium

PC to MacBookPro Compressor Workflow Query?

Hello,
I edited a 10 minute film on a PC using Adobe Premiere Pro. I need it a 1920x1080 Pro res 422 (HQ) file for a festival.
I own a MacBook Pro (which doesn't have any editing software on it). Before I purchase Compressor on this laptop can you please let me know if this workflow makes sense and if compressor is the right tool for the job.
Export the film in a lossless format (QT Animation) from Premiere Pro on the PC
Transfer the resulting file (75 GB!!!) to my MacBook Pro
Transcode the 75GB QT file to ProRes 422 file in compressor
Will the 75GB size be an issue for compressor? Is there anything else wrong with the above workflow?
Much appreciated,
Keogh

Keogh wrote:
Will the 75GB size be an issue for compressor?
Compressor can handle it. The transcode time will depend on your CPU.
Is there anything else wrong with the above workflow?
There's nothing wrong with it AFAIK. Nearly all of my cross-platform adventures are Mac to WIndows, so all I can say is that it seems reasonable to me.
Good luck.
Russ

Workflow query

I have a requirement where in on creating a condition type in ME11, based on condition types a workflow needs to be triggered.
Each condition type will be entered by different users and the approvers will also be different. The other thing is user can also enter condition type using ME12, MEK1, MEK2 for a new inforrecord request.
For a change request, he can enter the condition types through ME12, MEK1, MEK2.
User can at any point of time recall and re-submit or give up the request. If he gives up, the wrokflow should get terminated.
I wanted to know how this can be achieved.
I was thinking of lines where in
1) Events CREATE and CHANGE to be created for a custom BOR since standard BOR does not exists.
2) Have enhance,enhancement spots/user exits in ME11/ME12/MEK1/MEK2 to trigger respective events if i cannot capture standard CREATE or CHANGE events.
Appreciate your inputs.
Regards
PN

Thanks,
So u are saying instead of an event, use FM to trigger the workflow.
There is a case when the workflow is triggered, two work items should come to initiator inbox, which allow him to either resubmit the same again, or recall the entire workflow.
I have also a case where in on rejection by approver, the workitem will come back to the initiator to change and resubmit or he can terminate.
Since i am using ZME11/ZME12 to trigger the workflow, i needed to know for the "revise and resubmit" workitem which comes back to initiator incase approver rejects, can i call the same transaction"ZMe12" on click on the revise workitem, so that the initaitor can see the details , change and resubmit in the same workflow.?
in terminate case, i presume, i will need to trigger the terminating event on the button.
Also any idea how i can maitain SWFVISU, in SAP 4.6c 6.20 since it doesnt have that transaction.
Appreciate your help.
Regards
PN
Edited by: Portal Newbie on Oct 5, 2008 10:27 AM

Urgent : Workflow Query...

Hi,
I have created one workflow by using the BOR BUS2021.
here the Request id is Key field .
i have created the 5 methods for this object with the customer name space(Y).
when i am binding the from workflow to step.the request id is not appearing in the workflow container. is there any work need to be done before the binding .
my workflow should start after executing the transaction(FIBLFFP).how can i achieve this.?

Hi manjunatha,
You need to create a Container element in the workflow container of object type BUS2021 and also make sure that Task container has the same element of object type BUS2021...
Note: A container element is already created with the same object you used in the Task
Let me know if this helps.
Thanks & regards
Srinivas

Basic workflow query

Hi,
I am trying to test how workflow works. I have created a button in the form to initiate workflow. The workflow contains simple start --- email notification -- End. So everytime I click the button it should send email notification.

<TaskDefinition id='#ID#4CD857A30347C2E8:-3462B76:10C453E9D70:-7FF4' name='P1-WF1' lock='Configurator#1152287891764' creator='Configurator' createDate='1152224223915' lastModifier='Configurator' lastModDate='1152287591718' lastMod='94' taskType='Workflow' executor='com.waveset.workflow.WorkflowExecutor' suspendable='true' syncControlAllowed='true' execMode='sync' execLimit='0' resultLimit='0' resultOption='delete' visibility='runschedule' progressInterval='0'>
<Extension>
<WFProcess name='P1-WF1' maxSteps='0'>
<Activity id='0' name='Start'>
<Transition to='Email Notification'/>
<WorkflowEditor x='175' y='22'/>
</Activity>
<Activity id='1' name='End'>
<WorkflowEditor x='376' y='383'/>
</Activity>
<Activity id='2' name='Email Notification'>
<Action id='0' application='com.waveset.provision.WorkflowServices'>
<Argument name='op' value='notify'/>
</Action>
<Transition to='End'/>
<WorkflowEditor x='376' y='224'/>
</Activity>
<WFProcess name='process1' maxSteps='0'>
</WFProcess>
</WFProcess>
</Extension>
<MemberObjectGroups>
<ObjectRef type='ObjectGroup' id='#ID#Top' name='Top'/>
</MemberObjectGroups>
<Properties>
<Property name='editorOriginalName' value='P1-WF1'/>
</Properties>
</TaskDefinition>
Now if I initiate the workflow I should get sometext in notification.txt file as I configured the same in properties file. But after clicking I get the option for launch process and it doesn't show any process. Just wondering what needs to be configured to test simple workflow like this to start with.

Without a template or toAddress specified, i don't think any mail would be sent.
Also, how are you invoking the workflow?

Workflow query for change contract - VA42

Hi,
Has anybody worked on workflow for contract changes VA42. I have a requirement as when we change the contract, data is not updated properly for some line items. Can anybody please tell me how workflow is getting trigger once we change something in VA42. Any userexit or any configuration ?
Many Thanks,
Niki

Try using change documents to trigger a workflow event - transaction SWEC.

P2 Workflow Query: PC -- Mac

All
planning a P2 based shoot and am considering having a windows laptop with PCMCIA on set for storing card contents, likely on an external usb2 or firewire drive. Edit will be completed on FCP.
I'm looking for advice on the efficicy and mechanics of this workflow.
I have read thta with an all mac workflow, the recommendation would be to save the P2 card data as a disk image on the mac in the field and later transfer to the edit machine. This approach apparently reduces rick of file corruption etc.
However, if we use a PC laptop on set, will the p2 files copied to the external drive copy acros to the Mac FCP machine ok?
Can we go with NTFS for the external drive (since will be read only for FCP anyway)?
In summary, the proposed workflow is;
Acquire to P2 cards
Copy to external HD on set via PCMCIA on windows laptop
Attach external HD to FCP workstation
Ingest video clips
Will this work? Any gotchas? All advice appreciated.
Peter

It is important that you view/check your P2 content after dowloading it on the drive.
I haven't used a windows laptop with P2 viewer but try a MacBookPro if you can
Ideal kit:
*Panasonic Camera*
*MacBookPro with FCP6 installed*
*Duel Adapter* (PCMCIA adapter with fast dowloading performance
http://www.duel-systemsadapters.com/?productid=DP-0001)
*External hard drive* FW800(Would be great an eSATA but there is a problem when using a P2 cards on a MBP: both P2 card and eSATA need the express card slot).
Shoot the film> dowload P2 card content through duel adapter plugged in to the express card slot, with FCP6 running and Log&Transfer window active (Media target external drive i.e G-Tech G RAID2 connected through fire wire)

ECM Workflow query...

Hi,
In my ECM, I want that when 2nd line manager approves the compensation plan submitted by 1st manager, it should go to Business Partner. Now I am using a custom relationship as ZBP between 2nd line manager and Business Partners. How can I send approval/rejection to my Business Partner based on my custom relation ZBP.
It will be great if anyone can guide me in anyway or direct me to solve the problem.
regards,
Himanshu Verma.

Double post? Running WF based on Z relationships.
Please delete if unnecessary.
Regards,
Karri

ORABPEL-9708 Error while querying workflow task WFTask. Caused by:ORA-00936

Hi,
I am trying to integrate my Primavera p6 web version8.0 with the BPM setup 11.1.1.3 . The BPM is setup fine.
But when I integrated with primavera p6 and on load of workflows portlet of p6 web where the BPM tasks are listed, I am getting following exception in BPM console:
Error while querying workflow task WFTask.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services. .
ORABPEL-9708
Error while querying workflow task WFTask .
Error while querying workflow task WFTask.
Check the underlying exception and the database connection information. If the error persists, contact Oracle Support Services. .
at oracle.bpel.services.workflow.repos.driver.WFTask.getWFTask(WFTask.java:2181)
at oracle.bpel.services.workflow.repos.driver.PersistencyService.getWFTask(PersistencyService.java:907)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:751)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy220.queryTasks(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.queryTasks(TaskQueryServiceBean.java:120)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.queryTasks(TaskQueryService_oz1ipg_EOImpl.java:1019)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.sql.SQLSyntaxErrorException: ORA-00936: missing expression
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:95)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:135)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:210)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:473)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:423)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1095)
at oracle.jdbc.driver.T4CCallableStatement.doOall8(T4CCallableStatement.java:201)
at oracle.jdbc.driver.T4CCallableStatement.executeForDescribe(T4CCallableStatement.java:864)
at oracle.jdbc.driver.T4CCallableStatement.executeMaybeDescribe(T4CCallableStatement.java:948)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1335)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3568)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3620)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1667)
at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
at oracle.bpel.services.workflow.repos.driver.WFTask.getWFTask(WFTask.java:2153)
at oracle.bpel.services.workflow.repos.driver.PersistencyService.getWFTask(PersistencyService.java:907)
at oracle.bpel.services.workflow.query.impl.TaskQueryService.queryTasks(TaskQueryService.java:751)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
at oracle.bpel.services.workflow.common.WorkflowServiceCacheEventAdvice.invoke(WorkflowServiceCacheEventAdvice.java:89)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.workflow.test.workflow.ExceptionTestCaseBuilder.invoke(ExceptionTestCaseBuilder.java:155)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodEventAspect.invoke(MethodEventAspect.java:70)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at oracle.bpel.services.common.dms.MethodPhaseEventAspect.invoke(MethodPhaseEventAspect.java:82)
at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy220.queryTasks(Unknown Source)
at oracle.bpel.services.workflow.query.ejb.TaskQueryServiceBean.queryTasks(TaskQueryServiceBean.java:120)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl.queryTasks(TaskQueryService_oz1ipg_EOImpl.java:1019)
at oracle.bpel.services.workflow.query.ejb.TaskQueryService_oz1ipg_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589)
at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Could anybody please help me out in resolving the issue?
Thanks and Regards,
Krish

I have the same problem with P6 R8 integration with BPM 11g (running on WL 10.3.5.0). Any sugestions how to solve this?

Animation workflow query

Similar Messages

Maybe you are looking for