Animations Cause Mouse Cursor to Blink

I just upgraded my video card and am now using the <code>nvidia</code> drivers (I also upgraded my monitor to a Dell Ultrasharp 2005FPW at the same time).  Ever since then, my mouse cursor blinks when either doing animations like the typical hourglass (wait cursor), or when I happen to be hovering the normal cursor over an animation (like the loading screen of Xfce, for example).
The cursor blinking doesn't really cause any problems, but it is somewhat annoying.  Does anyone have any idea what could be causing this?

Add "Option "HWCursor" "off"" in Device section (where your GPU is defined) of xorg.conf.

Similar Messages

  • My mouse cursor keep blinking - Please Help

    I am using a Lenovo laptop since 2008. I like this product as my pet. But recently due to a problem I am not able to do any kind of work using this.
    Product: 3000 G410 2049
    Operating system: Windows 7
    The mouse start blinking during boot and it stop for few minutes if I press any key and then again start this problem again.
    I scan my laptop again and again and even reinstall the operating system but not able to fix it
    kind regards,
    Solved!
    Go to Solution.

    when you see lenovo logo, press f2 for bios, set default setting or just make a boot order for your device:
    first device > hdd, second device >dvd.
    or just remove the disk from dvdrom.

  • Can I use an animated symbol acting like a mouse cursor?

    Hi,
    I'd like to use an EDGE animated symbol ( a blinking magic wand) as my mouse cursor (hiding the original cursor) that stays on the stage all the time at a certain point in the timeline and when clicked on a hotspot, goes to another point in timeline where the symbol no longer act as a mouse cursor. I used the following code suggested in the following thread by YOSHIOKA Ume
    Re: How to I have an animated symbol follow the coordinates of the cursor when clicked?
    1:create a symbol named "Symbol_1"
    2:add this code on Symbol_1-Timeline.complete.
    //delete this instance when timeline complete. sym.deleteSymbol();
    3:add this code on document.compositionReady.
    //on/off mousemove event handler method
    sym.$("Stage")  
    .mouseover(function(){    
    sym.$("Stage").on("mousemove",draw);  
    //create instance of Symbol_1 on stage.
    function draw(evt){  
    var instance = sym.createChildSymbol("Symbol_1", "Stage");  
    instance.getSymbolElement().css({    
    position:"absolute",    
    top:evt.clientY,    
    left:evt.clientX   });
    But the problem is, the symbol is being repeated/drawn one after another according to the above code, which I don't want. Changing the cursor using CSS requires a URL of a image file, not a symbol inside EDGE as it seems. How can I get back the normal mouse cursor in another point in the timeline (and go back to the animated symbol mode again if needed?). If I click on another hotspot element on the stage, do I actually click on the attached symbol as a cursor? Or the hotspot?
    Also, how can I put a constraint on the cursor so that it stays within a certain rectangular area smaller than the stage?
    A suggestion is much appreciated.

    Here is a example I had to move a symbol around as a mouse cursor and play different part of the symbol timeline based on user action.
    mouseCursor.zip - Google Drive
    To constraint the symbol to stage area,check for the x and y values in the event callback function before moving the symbol.
    To get back the normal cursor set the css back to default
    ex: sym.getSymbol('Stage').getSymbolElement().css({ 'cursor' : 'default'});

  • What causes a slow mouse/cursor response on a fast machine?

    I have a system that has always displayed poor cursor redraw performance with certain adobe applications.   All rendering and other effects are fast, but basic mouse selections and button knobs are extremely unresponsive.   I have searched and searched and can not seem to find out what causes the mouse cursor speed issues.   Does anyone have any ideas as to why my mouse would slow for such basic Interface interactions?    Do I need to change my hardware, settings, displays, BIOS, etc?
    Any insight into what the mouse redraw/refresh is called in terms of computing would help me search for a solution.  And if you have a solution as to why my mouse cursor acts drunk and sluggish when interacting with the Adobe UI's in premiere and after effects and sometimes Photoshop I would greatly appreciate the help.
    Thank You.  I attached a screen shot of a very basic selection interaction that is dog slow.  The selection box redraws like there is a lag in some process associated with the square box overlay.
    Computer Specs
    Windows 7 64
    ASUS Z9PE-d8
    dual xeon
    64 gig ram
    quadro 5000 (driving two 30 inch dell monitors of different models  One DVI-D and the other Display Port)
    512 SSD main drive with windows Swap on 10k Raptor drive.
    *All have been updated and the issue remains for over a year and a half.
    Thank you so much.
    Cliff

    Your answer is in this part of your specs:
    > (driving two 30 inch dell monitors)
    It takes a long time to draw and redraw the pixels to the screen(s) with such large monitors.
    We can mitigate this by making some changes in how our UI is drawn to the screen, and such changes are a rather high priority for use to work on for the near future.

  • Animated Mouse Cursor

    Hello,
    How do I go about creating an 'animated mouse cursor', could someone point me in the right direction please.
    Thank you in advance.

    Make an array of custom cursors, then loop through the different images every 20 ms

  • Xorg-server 1.6 - black screen with mouse cursor

    Hi
    First of all: I'm really new to Arch, so maybe there is a real easy fix for this problem
    Since upgrading to xorg-server 1.6 (and today to 1.6.1) I'm not able to get a running Desktop Environment.
    Usually I am using gnome with compiz-fusion on my Geforce 4 (nvidia-96xx 96.43.11-4 driver).
    When I boot my machine i see gdm and I am able to login. I can hear my login sound but I only get a black screen with a mouse cursor.
    I added a new test user to my system without compiz and get the same.
    I tried my old xorg.conf from 1.5, generated a new one with X -configure and tried without xorg.conf but everytime the same
    Actually I'm not sure if the xorg update is responsible for this, because i did not watch the upgrade-process....
    I googled this problem and was searching similar things in this froum, but I wasn't able to find something
    Here are some files
    xorg.conf (i know there are some bullshit things in it, but it was workig )
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5x) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    Section "Module"
    # This loads the DBE extension module.
    Load "dbe" # Double buffer extension
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    # This loads the font modules
    # Load "type1"
    # Load "freetype"
    # Load "xtt"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    EndSection
    # Files section. This allows default font and rgb paths to be set
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    # FontPath "/usr/share/fonts/OTF"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/local/"
    FontPath "/usr/lib/X11/fonts/misc/"
    FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    FontPath "/usr/lib/X11/fonts/75dpi/"
    FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    EndSection
    # Server flags section.
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    EndSection
    # Input devices
    # Core keyboard's InputDevice section
    Section "InputDevice"
    Identifier "Keyboard1"
    Driver "kbd"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    Option "XkbRules" "xorg"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "de"
    Option "XkbVariant" "nodeadkeys"
    EndSection
    # Core Pointer's InputDevice section
    Section "InputDevice"
    # Identifier and driver
    Identifier "Mouse1"
    Driver "mouse"
    Option "Protocol" "IMPS/2" # PS/2 Mouse
    Option "Device" "/dev/psaux"
    Option "Buttons" "5"
    Option "ZAxisMapping" "4 5"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    EndSection
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    Section "Monitor"
    Identifier "Eizo"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync 24.8-80
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 50-75
    EndSection
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName "Unknown"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    Driver "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    EndSection
    # Device configured by xorgconfig:
    Section "Device"
    Identifier "GeForce4"
    # Driver "nv"
    Driver "nvidia"
    #VideoRam 131072
    # Insert Clocks lines here if appropriate
    EndSection
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
    Identifier "Screen 1"
    Device "GeForce4"
    Monitor "Eizo"
    DefaultDepth 24
    Option "AddARGBGLXVisuals" "true"
    Subsection "Display"
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    Subsection "Display"
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort 0 0
    EndSubsection
    EndSection
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    Section "ServerLayout"
    # The Identifier line must be present
    Identifier "Simple Layout"
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    Screen "Screen 1"
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "Extensions"
    Option "Composite" "enable"
    EndSection
    Xorg.0.log
    X.Org X Server 1.6.1
    Release Date: 2009-4-14
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.29-ARCH i686
    Current Operating System: Linux delirium 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
    Build Date: 15 April 2009 11:09:10AM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 15 23:20:32 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "Eizo"
    (**) | |-->Device "GeForce4"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/lib/X11/fonts/local/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
    Entry deleted from font path.
    (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
    Entry deleted from font path.
    (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (**) Extension "Composite" is enabled
    (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    (WW) Disabling Mouse1
    (WW) Disabling Keyboard1
    (II) Loader magic: 0x1a40
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7
    (--) PCI:*(0@3:0:0) nVidia Corporation NV25 [GeForce4 Ti 4200] rev 163, Mem @ 0xe5000000/16777216, 0xd0000000/134217728, 0xd8000000/524288, BIOS @ 0x????????/131072
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) System resource ranges:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) "dri2" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Server Extension
    (II) NVIDIA GLX Module 96.43.11 Mon Feb 23 15:43:14 PST 2009
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "nvidia"
    (II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
    (II) Module nvidia: vendor="NVIDIA Corporation"
    compiled for 4.0.2, module version = 1.0.0
    Module class: X.Org Video Driver
    (II) NVIDIA dlloader X Driver 96.43.11 Mon Feb 23 15:32:04 PST 2009
    (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    (II) Primary Device is: PCI 03@00:00:0
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.1, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) resource ranges after probing:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    (==) NVIDIA(0): RGB weight 888
    (==) NVIDIA(0): Default visual is TrueColor
    (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) NVIDIA(0): Option "AddARGBGLXVisuals" "true"
    (**) NVIDIA(0): Enabling RENDER acceleration
    (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    (II) NVIDIA(0): enabled.
    (II) NVIDIA(0): NVIDIA GPU GeForce4 Ti 4200 at PCI:3:0:0 (GPU-0)
    (--) NVIDIA(0): Memory: 131072 kBytes
    (--) NVIDIA(0): VideoBIOS: 04.25.00.34.00
    (II) NVIDIA(0): Detected AGP rate: 4X
    (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    (--) NVIDIA(0): Connected display device(s) on GeForce4 Ti 4200 at PCI:3:0:0:
    (--) NVIDIA(0): EIZO L578 (DFP-0)
    (--) NVIDIA(0): EIZO L578 (DFP-0): 165.0 MHz maximum pixel clock
    (--) NVIDIA(0): EIZO L578 (DFP-0): External Single Link TMDS
    (II) NVIDIA(0): Assigned Display Device: DFP-0
    (II) NVIDIA(0): Validated modes:
    (II) NVIDIA(0): "1280x1024"
    (II) NVIDIA(0): "1024x768"
    (II) NVIDIA(0): "800x600"
    (II) NVIDIA(0): "640x480"
    (II) NVIDIA(0): Virtual screen size determined to be 1280 x 1024
    (--) NVIDIA(0): DPI set to (95, 96); computed from "UseEdidDpi" X config
    (--) NVIDIA(0): option
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC? No, I don't.
    (II) resource ranges after preInit:
    [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
    (II) NVIDIA(0): Initialized GART.
    (II) NVIDIA(0): Setting mode "1280x1024"
    (II) Loading extension NV-GLX
    (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
    (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
    (==) NVIDIA(0): Backing store disabled
    (==) NVIDIA(0): Silken mouse enabled
    (II) NVIDIA(0): DPMS enabled
    (II) Loading extension NV-CONTROL
    (==) RandR enabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing extension GLX
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.2.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 4.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
    (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
    (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
    (II) config/hal: Adding input device ImPS/2 Logitech Wheel Mouse
    (**) ImPS/2 Logitech Wheel Mouse: always reports core events
    (**) ImPS/2 Logitech Wheel Mouse: Device: "/dev/input/event6"
    (II) ImPS/2 Logitech Wheel Mouse: Found 3 mouse buttons
    (II) ImPS/2 Logitech Wheel Mouse: Found x and y relative axes
    (II) ImPS/2 Logitech Wheel Mouse: Found scroll wheel(s)
    (II) ImPS/2 Logitech Wheel Mouse: Configuring as mouse
    (**) ImPS/2 Logitech Wheel Mouse: YAxisMapping: buttons 4 and 5
    (**) ImPS/2 Logitech Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE)
    (**) ImPS/2 Logitech Wheel Mouse: (accel) keeping acceleration scheme 1
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter chain progression: 2.00
    (**) ImPS/2 Logitech Wheel Mouse: (accel) filter stage 0: 20.00 ms
    (**) ImPS/2 Logitech Wheel Mouse: (accel) set acceleration profile 0
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device saa7134 IR (LifeView FlyVIDEO30
    (**) saa7134 IR (LifeView FlyVIDEO30: always reports core events
    (**) saa7134 IR (LifeView FlyVIDEO30: Device: "/dev/input/event5"
    (II) saa7134 IR (LifeView FlyVIDEO30: Found keys
    (II) saa7134 IR (LifeView FlyVIDEO30: Configuring as keyboard
    (II) XINPUT: Adding extended input device "saa7134 IR (LifeView FlyVIDEO30" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    Last edited by MueLLe (2009-04-15 21:35:42)

    I'm having a very similar issue. Sometimes, when I boot and type in startx (I'm not even a GNOME user--I use dwm and no graphical login manager), I just get a black screen. No mouse cursor, so I think X doesn't even load. It only started with the xserver 1.6 update and the update to that hasn't changed anything. What I've been doing is just rebooting until it loads normally (takes one to three times). Is anyone else having this problem?

  • Gnome Black Screen with Mouse Cursor after Login

    I am using Archlinux 64bit with a Gnome Desktop Environment. Everything was running normally uptill today. When i ran "sudo fc-cache", my system froze. I couldnt open any other app but i was able to access terminal. I restarted using "reboot" command. After that I was unable to log in to my desktop.
    The Gnome login screen comes and after entering the correct username and password, all I can see is a black screen with mouse cursor. I then started gnome manually with "startx" and it worked. But still I am unable to use normally (that is the graphical login). I reinstalled gdm but it didnt work. Please help me out.

    there are a lot of processess running... dunno killing which process will not cause a problem
    here is the xorg log  ( sorry i dont have much knowlegde to analyse it )
    [ 2957.489]
    X.Org X Server 1.16.1
    Release Date: 2014-09-21
    [ 2957.493] X Protocol Version 11, Revision 0
    [ 2957.494] Build Operating System: Linux 3.16.1-1-ARCH x86_64
    [ 2957.495] Current Operating System: Linux defo-arch 3.17.1-1-ARCH #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014 x86_64
    [ 2957.495] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3c376af4-e330-4277-8bfa-388dabfced9e rw quiet
    [ 2957.497] Build Date: 21 September 2014 10:53:13AM
    [ 2957.498]
    [ 2957.499] Current version of pixman: 0.32.6
    [ 2957.501] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2957.501] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2957.506] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 26 01:36:27 2014
    [ 2957.507] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 2957.507] (==) No Layout section. Using the first Screen section.
    [ 2957.507] (==) No screen section available. Using defaults.
    [ 2957.507] (**) |-->Screen "Default Screen Section" (0)
    [ 2957.507] (**) | |-->Monitor "<default monitor>"
    [ 2957.507] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2957.507] (==) Automatically adding devices
    [ 2957.507] (==) Automatically enabling devices
    [ 2957.507] (==) Automatically adding GPU devices
    [ 2957.507] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 2957.507] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 2957.507] Entry deleted from font path.
    [ 2957.507] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 2957.507] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 2957.507] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2957.507] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2957.507] (II) Loader magic: 0x818d80
    [ 2957.507] (II) Module ABI versions:
    [ 2957.507] X.Org ANSI C Emulation: 0.4
    [ 2957.507] X.Org Video Driver: 18.0
    [ 2957.507] X.Org XInput driver : 21.0
    [ 2957.507] X.Org Server Extension : 8.0
    [ 2957.509] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
    [ 2957.509] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2957.510] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
    [ 2957.512] (--) PCI:*(0:0:2:0) 8086:2a02:1028:022f rev 12, Mem @ 0xfea00000/1048576, 0xe0000000/268435456, I/O @ 0x0000eff8/8
    [ 2957.512] (--) PCI: (0:0:2:1) 8086:2a03:1028:022f rev 12, Mem @ 0xfeb00000/1048576
    [ 2957.512] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2957.512] (II) LoadModule: "glx"
    [ 2957.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2957.514] (II) Module glx: vendor="X.Org Foundation"
    [ 2957.514] compiled for 1.16.1, module version = 1.0.0
    [ 2957.514] ABI class: X.Org Server Extension, version 8.0
    [ 2957.514] (==) AIGLX enabled
    [ 2957.514] (==) Matched intel as autoconfigured driver 0
    [ 2957.514] (==) Matched intel as autoconfigured driver 1
    [ 2957.514] (==) Matched modesetting as autoconfigured driver 2
    [ 2957.514] (==) Matched fbdev as autoconfigured driver 3
    [ 2957.514] (==) Matched vesa as autoconfigured driver 4
    [ 2957.514] (==) Assigned the driver to the xf86ConfigLayout
    [ 2957.514] (II) LoadModule: "intel"
    [ 2957.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 2957.515] (II) Module intel: vendor="X.Org Foundation"
    [ 2957.515] compiled for 1.16.1, module version = 2.99.916
    [ 2957.515] Module class: X.Org Video Driver
    [ 2957.515] ABI class: X.Org Video Driver, version 18.0
    [ 2957.515] (II) LoadModule: "modesetting"
    [ 2957.515] (WW) Warning, couldn't open module modesetting
    [ 2957.515] (II) UnloadModule: "modesetting"
    [ 2957.515] (II) Unloading modesetting
    [ 2957.515] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "fbdev"
    [ 2957.515] (WW) Warning, couldn't open module fbdev
    [ 2957.515] (II) UnloadModule: "fbdev"
    [ 2957.515] (II) Unloading fbdev
    [ 2957.515] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 2957.515] (II) LoadModule: "vesa"
    [ 2957.515] (WW) Warning, couldn't open module vesa
    [ 2957.515] (II) UnloadModule: "vesa"
    [ 2957.515] (II) Unloading vesa
    [ 2957.515] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 2957.515] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
    [ 2957.516] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
    [ 2957.516] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
    [ 2957.516] (++) using VT number 1
    [ 2957.516] (--) controlling tty is VT number 1, auto-enabling KeepTty
    [ 2957.516] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20140725
    [ 2957.516] (--) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    [ 2957.517] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1
    [ 2957.517] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 2957.517] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 2957.517] (==) intel(0): RGB weight 888
    [ 2957.517] (==) intel(0): Default visual is TrueColor
    [ 2957.517] (II) intel(0): Output LVDS1 has no monitor section
    [ 2957.517] (--) intel(0): Found backlight control interface acpi_video0 (type 'firmware') for output LVDS1
    [ 2957.517] (II) intel(0): Enabled output LVDS1
    [ 2957.517] (II) intel(0): Output VGA1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VGA1
    [ 2957.517] (II) intel(0): Output HDMI1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output HDMI1
    [ 2957.517] (II) intel(0): Output TV1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output TV1
    [ 2957.517] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
    [ 2957.517] (II) intel(0): Output VIRTUAL1 has no monitor section
    [ 2957.517] (II) intel(0): Enabled output VIRTUAL1
    [ 2957.517] (--) intel(0): Output LVDS1 using initial mode 1280x800 on pipe 1
    [ 2957.517] (==) intel(0): TearFree disabled
    [ 2957.517] (==) intel(0): DPI set to (96, 96)
    [ 2957.517] (II) Loading sub module "dri2"
    [ 2957.517] (II) LoadModule: "dri2"
    [ 2957.517] (II) Module "dri2" already built-in
    [ 2957.517] (II) Loading sub module "present"
    [ 2957.517] (II) LoadModule: "present"
    [ 2957.517] (II) Module "present" already built-in
    [ 2957.517] (==) Depth 24 pixmap format is 32 bpp
    [ 2957.518] (II) intel(0): SNA initialized with Broadwater (gen4) backend
    [ 2957.518] (==) intel(0): Backing store enabled
    [ 2957.518] (==) intel(0): Silken mouse enabled
    [ 2957.518] (II) intel(0): HW Cursor enabled
    [ 2957.518] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 2957.518] (==) intel(0): DPMS enabled
    [ 2957.518] (II) intel(0): [XvMC] i965_xvmc driver initialized.
    [ 2957.518] (II) intel(0): [DRI2] Setup complete
    [ 2957.518] (II) intel(0): [DRI2] DRI driver: i965
    [ 2957.518] (II) intel(0): [DRI2] VDPAU driver: i965
    [ 2957.518] (II) intel(0): direct rendering: DRI2 enabled
    [ 2957.518] (II) intel(0): hardware support for Present enabled
    [ 2957.518] (==) intel(0): display hotplug detection enabled
    [ 2957.518] (--) RandR disabled
    [ 2957.569] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 2957.569] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 2957.569] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 2957.569] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
    [ 2957.569] (II) AIGLX: enabled GLX_ARB_fbconfig_float
    [ 2957.569] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 2957.569] (II) AIGLX: Loaded and initialized i965
    [ 2957.569] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 2957.576] (II) intel(0): switch to mode [email protected] on LVDS1 using pipe 1, position (0, 0), rotation normal, reflection none
    [ 2957.583] (II) intel(0): Setting screen physical size to 338 x 211
    [ 2957.636] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 2957.636] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 2957.636] (II) LoadModule: "evdev"
    [ 2957.636] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2957.637] (II) Module evdev: vendor="X.Org Foundation"
    [ 2957.637] compiled for 1.16.0, module version = 2.9.0
    [ 2957.637] Module class: X.Org XInput Driver
    [ 2957.637] ABI class: X.Org XInput driver, version 21.0
    [ 2957.637] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 15 paused 0
    [ 2957.637] (II) Using input driver 'evdev' for 'Video Bus'
    [ 2957.638] (**) Video Bus: always reports core events
    [ 2957.638] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 2957.638] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 2957.638] (--) evdev: Video Bus: Found keys
    [ 2957.638] (II) evdev: Video Bus: Configuring as keyboard
    [ 2957.638] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:00/input/input19/event12"
    [ 2957.638] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
    [ 2957.638] (**) Option "xkb_rules" "evdev"
    [ 2957.638] (**) Option "xkb_model" "pc104"
    [ 2957.638] (**) Option "xkb_layout" "us"
    [ 2957.669] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2957.670] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.670] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 16 paused 0
    [ 2957.670] (II) Using input driver 'evdev' for 'Power Button'
    [ 2957.670] (**) Power Button: always reports core events
    [ 2957.670] (**) evdev: Power Button: Device: "/dev/input/event2"
    [ 2957.670] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 2957.670] (--) evdev: Power Button: Found keys
    [ 2957.670] (II) evdev: Power Button: Configuring as keyboard
    [ 2957.670] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6/event2"
    [ 2957.670] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 2957.670] (**) Option "xkb_rules" "evdev"
    [ 2957.670] (**) Option "xkb_model" "pc104"
    [ 2957.670] (**) Option "xkb_layout" "us"
    [ 2957.671] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 2957.671] (II) No input driver specified, ignoring this device.
    [ 2957.671] (II) This device may have been added with another device file.
    [ 2957.671] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 2957.671] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2957.672] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 17 paused 0
    [ 2957.672] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 2957.672] (**) Sleep Button: always reports core events
    [ 2957.672] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 2957.672] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 2957.672] (--) evdev: Sleep Button: Found keys
    [ 2957.672] (II) evdev: Sleep Button: Configuring as keyboard
    [ 2957.672] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
    [ 2957.672] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 2957.672] (**) Option "xkb_rules" "evdev"
    [ 2957.672] (**) Option "xkb_model" "pc104"
    [ 2957.672] (**) Option "xkb_layout" "us"
    [ 2957.673] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel HDMI/DP,pcm=3 (/dev/input/event7)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.673] (II) config/udev: Adding input device HDA Intel Front Headphone Front (/dev/input/event8)
    [ 2957.673] (II) No input driver specified, ignoring this device.
    [ 2957.673] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device HDA Intel Front Headphone Surround (/dev/input/event9)
    [ 2957.674] (II) No input driver specified, ignoring this device.
    [ 2957.674] (II) This device may have been added with another device file.
    [ 2957.674] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2957.674] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2957.675] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 18 paused 0
    [ 2957.675] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 2957.675] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2957.675] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 2957.675] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 2957.675] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2957.675] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 2957.675] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
    [ 2957.675] (**) Option "xkb_rules" "evdev"
    [ 2957.675] (**) Option "xkb_model" "pc104"
    [ 2957.675] (**) Option "xkb_layout" "us"
    [ 2957.675] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event11)
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
    [ 2957.675] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "Default clickpad buttons"
    [ 2957.675] (II) LoadModule: "synaptics"
    [ 2957.676] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 2957.676] (II) Module synaptics: vendor="X.Org Foundation"
    [ 2957.676] compiled for 1.16.0, module version = 1.8.1
    [ 2957.676] Module class: X.Org XInput Driver
    [ 2957.676] ABI class: X.Org XInput driver, version 21.0
    [ 2957.676] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 19 paused 0
    [ 2957.676] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
    [ 2957.676] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.676] (**) Option "Device" "/dev/input/event11"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767 (res 0)
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
    [ 2957.710] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range. defaulting to 0 - 15
    [ 2957.710] (**) Option "TapButton1" "1"
    [ 2957.710] (**) Option "TapButton2" "2"
    [ 2957.710] (**) Option "TapButton3" "3"
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
    [ 2957.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input10/event11"
    [ 2957.710] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 10)
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MaxSpeed is now 1.75
    [ 2957.710] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) AccelFactor is now 0.156
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
    [ 2957.710] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
    [ 2957.710] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
    [ 2957.711] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
    [ 2957.711] (**) AlpsPS/2 ALPS GlidePoint: Ignoring device from InputClass "touchpad ignore duplicates"
    [ 2957.711] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/event10)
    [ 2957.711] (**) ALPS PS/2 Device: Applying InputClass "evdev pointer catchall"
    [ 2957.712] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 20 paused 0
    [ 2957.712] (II) Using input driver 'evdev' for 'ALPS PS/2 Device'
    [ 2957.712] (**) ALPS PS/2 Device: always reports core events
    [ 2957.712] (**) evdev: ALPS PS/2 Device: Device: "/dev/input/event10"
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Vendor 0x2 Product 0x8
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found 3 mouse buttons
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found relative axes
    [ 2957.712] (--) evdev: ALPS PS/2 Device: Found x and y relative axes
    [ 2957.712] (II) evdev: ALPS PS/2 Device: Configuring as mouse
    [ 2957.712] (**) evdev: ALPS PS/2 Device: YAxisMapping: buttons 4 and 5
    [ 2957.712] (**) evdev: ALPS PS/2 Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2957.712] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input12/event10"
    [ 2957.712] (II) XINPUT: Adding extended input device "ALPS PS/2 Device" (type: MOUSE, id 11)
    [ 2957.712] (II) evdev: ALPS PS/2 Device: initialized for relative axes.
    [ 2957.712] (**) ALPS PS/2 Device: (accel) keeping acceleration scheme 1
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration profile 0
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration factor: 2.000
    [ 2957.712] (**) ALPS PS/2 Device: (accel) acceleration threshold: 4
    [ 2957.713] (II) config/udev: Adding input device ALPS PS/2 Device (/dev/input/mouse0)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.713] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 2957.713] (II) No input driver specified, ignoring this device.
    [ 2957.713] (II) This device may have been added with another device file.
    [ 2957.714] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event5)
    [ 2957.714] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 2957.714] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 21 paused 0
    [ 2957.714] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
    [ 2957.714] (**) Dell WMI hotkeys: always reports core events
    [ 2957.714] (**) evdev: Dell WMI hotkeys: Device: "/dev/input/event5"
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Vendor 0 Product 0
    [ 2957.714] (--) evdev: Dell WMI hotkeys: Found keys
    [ 2957.714] (II) evdev: Dell WMI hotkeys: Configuring as keyboard
    [ 2957.714] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event5"
    [ 2957.714] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 12)
    [ 2957.714] (**) Option "xkb_rules" "evdev"
    [ 2957.714] (**) Option "xkb_model" "pc104"
    [ 2957.714] (**) Option "xkb_layout" "us"
    [ 2963.887] (II) evdev: Dell WMI hotkeys: Close
    [ 2963.887] (II) UnloadModule: "evdev"
    [ 2963.887] (II) systemd-logind: releasing fd for 13:69
    [ 2963.949] (II) evdev: ALPS PS/2 Device: Close
    [ 2963.950] (II) UnloadModule: "evdev"
    [ 2963.950] (II) systemd-logind: releasing fd for 13:74
    [ 2964.016] (II) UnloadModule: "synaptics"
    [ 2964.016] (II) systemd-logind: releasing fd for 13:75
    [ 2964.069] (II) evdev: AT Translated Set 2 keyboard: Close
    [ 2964.070] (II) UnloadModule: "evdev"
    [ 2964.070] (II) systemd-logind: releasing fd for 13:64
    [ 2964.123] (II) evdev: Sleep Button: Close
    [ 2964.123] (II) UnloadModule: "evdev"
    [ 2964.123] (II) systemd-logind: releasing fd for 13:67
    [ 2964.156] (II) evdev: Power Button: Close
    [ 2964.156] (II) UnloadModule: "evdev"
    [ 2964.156] (II) systemd-logind: releasing fd for 13:66
    [ 2964.183] (II) evdev: Video Bus: Close
    [ 2964.183] (II) UnloadModule: "evdev"
    [ 2964.183] (II) systemd-logind: releasing fd for 13:76
    [ 2964.271] (EE) Server terminated successfully (0). Closing log file.

  • Black Screen with mouse cursor

    Hello
    We are an enterprise organization with staffs logging in to their systems using domain username and password.
    For some of our users having Windows 7 as OS, when they log in with their domain credentials a blank screen appears with movable mouse cursor, this screen does not go away until we disconnect them from LAN as well as wireless after which only the login
    happens.
    Kindly suggest how to resolve this issue

    Hi,
    Have you tried the suggestion Cyber_Defend_Team provided?
    If the issue persists, start the computer in Safe mode to check the result:
    If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
    in safe mode and then remove the program that's causing the problem.
    If it still in the safe mode, we may need to repair the installation with the recovery media.
    In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
    Karen Hu
    TechNet Community Support

  • [SOLVED] log into KDE given a blank black screen with mouse cursor

    hi,
    noticed kwin using much higher cpu usage then normal, restarted KDE, everything seemed ok and then, while copying a file over to a samba share, my desktop went black with only a mouse cursor.
    Restarted KDE, rebooted pc, reinstalled KDE (everything), xorg, nvidia, deleted xorg.conf created new user but nothing will give me my desktop back
    once when i logged on, i had a kde crash report and messages on my widgets saying missing components. Tried to submit bug but missing debugging tools.
    sometimes KDE won't log in at all.
    forced an fsck on next boot with no errors found.
    please help
    thanks
    EDIT: [solved] I had filled up my /var partition. cleaned pacman cache and all is good again. Phew!
    Last edited by Fungyo (2009-12-07 08:10:40)

    Hi,
    Have you tried the suggestion Cyber_Defend_Team provided?
    If the issue persists, start the computer in Safe mode to check the result:
    If it doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers as possible causes. If a recently installed program, device, or driver prevents Windows from running correctly, you can start your computer
    in safe mode and then remove the program that's causing the problem.
    If it still in the safe mode, we may need to repair the installation with the recovery media.
    In addition, please logon the problematic computer with the domain user account which works fine in other computer to test to see if it's the user account issue.
    Karen Hu
    TechNet Community Support

  • Vista Home Premium: Following install, black screen with mouse cursor

    I have tried installing with Boot Camp (v2.0) twice now with the same result.
    After the install is complete, the mac reboots into windows. I should see the Vista welcome screen but instead I get the black screen with a mouse cursor. The mouse is functional but clearly not much use!
    A subsequent reboot brings up the options for restarting following an unclean shutdown of windows. Running in safe mode, the restart hangs. The last dll loaded was crcdisk.
    I am running an OEM version - once activated (assuming I ever get that far) - the installation will be locked to the mac... which is fine.
    Googling the problem reveals some early Vista beta issues with graphics that caused a similar problem. Does Vista have an issue with the 8800GT that is fitted in my Mac?
    Any help/ideas/suggestions/fixes much appreciated. Rather stumped.
    I would load up XP Pro but I dont have an installer with SP2 :/

    Well my problem turns out to be a bad disk. I added two seagate 7200.11 750GB drives. Once which was making ominous ticking sounds. Vista took an age to install and really, I should have caught on earlier.
    When I got a bunch of disk i/o errors creating a Fusion VM of XP Pro I decided to remove the disk and to try the other unit.
    Vista installed very rapidly indeed and worked. Yes worked.
    Hurrah! Problem solved.
    Time to see about replacing that disk...

  • Hp Pavilion 23 Blank Screen With Mouse Cursor After Hp Logo (Not Windows Logo)

    Hello my computer wont start up all i get is a black screen but i have a mouse cursor. after a little bit the computer will restart and do a automatic repair but nothing happens it just keeps on rebooting. i tired to do a bio update but it seems to not be working. there is no option in the bios to update or even in UEFI. i also did a harddrive test and got a Short DST Check fail (FAILURE ID: 909HVX-0007K0-WPU2XF-60WH03) but i still can get access to the harddrive using a Linux LiveUSB and all files are there. (Product Number Is : H5P60AAR#ABA)

    It is possible to receive a false DST check but not common.
    It doesn't mean your hard has failed but that it is in imminent danger of failing.
    You can try again but this time using the Extended DST test.
    But before doing anything I suggest you back up all your important data using that live Linux boot disk just in case.
    Every hard disk manufacturer has their own diagnostic boot cd/usb. Google it.
    You should create one and run it for your brand hard drive.
    You should be able to determine which brand you have from the BIOS/UEFI hardware tab.
    While your'e in there double check that your boot priority is set to hard drive first.
    Your other issue seems to be the dreaded 'Automatic Repair Loop' which could be caused by your possibly failing hard dirve. I would fully diagnose the hard drive first.
    Here's a link with several suggested fixes. Some of them require a Windows 8 boot disk, other do not.
    Automatic Repair Loop Fixes
    If you found my answer helpful please say thanks by clicking on the Thumb's Up icon. Thanks!

  • Hide mouse cursor when typing is not working in IE11 Windows7

    Hide mouse cursor when typing is not working in IE11 Windows7 - I saw a post that devs were looking at this in 2011? Slow progress huh?
    This is really annoying when you have to move the cursor to see what you are typing...

    Hi,
    Please first make sure that Mouse Properties\Pointer options\Hide pointer while typing is ticked.
    If this option is already ticked, then try following steps to troubleshoot:
    Update the driver for the mouse to get the best performance.
    Choose a different cursor as Rob said for a test.
    If this issue occurred recently, check if you have any newly installed programs or IE add-ons which cause this issue, you can test this in no add-ons mode, click start button, type "internet" in the search box, choose "internet explorer (No add-on)".
    * I test in My IE, I have Hide pointer while typing checked, and in some typing boxes in IE the cursor will hide automatically, while some are not, but I think it's not an annoying issue for me.*
    Regard
    Yolanda
    TechNet Community Support

  • OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC 2014

    OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC. When trying to click on a specific line of code in a js file the cursor ends up in a different place in the script and several lines of code highlighted. Clicking again jumps the mouse to a different position and even more lines of code highlighted and some characters rearranged, breaking the lines of code. Very frustrating.

    Preran,
    I am having the same issue. I have a MBP connected to 2 x Dell 27" monitors over Mini DisplayPort to HDMI cables. Once I updated to OS X 10.10.2 this cursor highlight/jumping around issue only occurs on the connected monitors. If I move the program to the main laptop display the issue goes away. It does not require me to restart the program or the machine to make it work correctly. One way I am able to identify the issue is if I go to the line numbers in code like I wanted to select multiple lines - in the one that works correctly, the cursor turns into a white version where the tip of the cursor points to the right. When it is wrong, the cursor stays black and will only have the tip point to the left. Its just another way I identified if it was working cause I tried uninstalling DW and reinstalling - didn't work. Reset preferences as you discussed - no go. And I used other editors like IntelliJ and Adobe Edge Code - all of which work fine and don't display this issue.
    I tried the preferences reset you suggest and it doesn't work. I have another machine with OS X 10.10.1 on it and this issue is not there on any monitor. Any help with this ASAP as it pretty much stops you from being able to do any editing especially with longer pages as it consistently wants to page up when you select anything and if you then click again in another area it tries to move the highlighted code to that new spot.
    Update: I have a USB Microsoft Arch touch mouse connected (always worked just fine). When I go to place my cursor at some point in the code it causes the highlight flicker. If I switch over and use the built in trackpad, then I can place the cursor without the highlight issue. When trying to select multiple lines or sections of code, that still see's the highlight, page up and move of code issues regardless of input type.

  • [Solved] Login freezing with busy mouse cursor and black screen.

    After installing some recent updates I have suddenly found a problem when starting the login manager for Cinnamon.
    After booting I am greeted with a black screen and a "busy" mouse cursor - like a stopwatch. I can't ctrl-alt-backspace to restart X.
    What fixes it is - if I ctrl-alt-F2 to a new console and kill -9 the Xorg process. This causes X to restart normally. I have to do this every time now
    I don't know if this is systemd related or what, but it only seemed to happen after the updates below.
    [2012-11-23 21:32] Running 'pacman -Sy'
    [2012-11-23 21:32] synchronizing package lists
    [2012-11-23 21:33] Running 'pacman -S -u'
    [2012-11-23 21:33] starting full system upgrade
    [2012-11-23 21:35] upgraded accountsservice (0.6.25-1 -> 0.6.29-1)
    [2012-11-23 21:35] upgraded calibre (0.9.6-2 -> 0.9.7-1)
    [2012-11-23 21:35] upgraded cronie (1.4.8-3 -> 1.4.8-4)
    [2012-11-23 21:35] upgraded dhcpcd (5.6.2-1 -> 5.6.3-2)
    [2012-11-23 21:35] upgraded firefox (16.0.2-1 -> 17.0-1)
    [2012-11-23 21:35] upgraded firefox-adblock-plus (2.1.2-1 -> 2.2.1-3)
    [2012-11-23 21:35] upgraded firefox-i18n-en-gb (16.0.2-1 -> 17.0-1)
    [2012-11-23 21:35] upgraded gnome-mplayer (1.0.7-1 -> 1.0.7-2)
    [2012-11-23 21:35] upgraded gstreamer (1.0.2-1 -> 1.0.3-1)
    [2012-11-23 21:35] upgraded gst-plugins-base-libs (1.0.2-1 -> 1.0.3-1)
    [2012-11-23 21:35] upgraded gst-plugins-bad (1.0.2-1 -> 1.0.3-1)
    [2012-11-23 21:35] upgraded gst-plugins-base (1.0.2-1 -> 1.0.3-1)
    [2012-11-23 21:35] upgraded gst-plugins-good (1.0.2-1 -> 1.0.3-1)
    [2012-11-23 21:36] upgraded harfbuzz (0.9.5-2 -> 0.9.6-1)
    [2012-11-23 21:36] upgraded libsecret (0.11-1 -> 0.12-2)
    [2012-11-23 21:36] >>> Updating module dependencies. Please wait ...
    [2012-11-23 21:36] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-11-23 21:36] ==> Building image from preset: 'default'
    [2012-11-23 21:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-11-23 21:36] ==> Starting build: 3.6.7-1-ARCH
    [2012-11-23 21:36] -> Running build hook: [base]
    [2012-11-23 21:36] -> Running build hook: [udev]
    [2012-11-23 21:36] -> Running build hook: [pata]
    [2012-11-23 21:36] -> Running build hook: [scsi]
    [2012-11-23 21:36] -> Running build hook: [sata]
    [2012-11-23 21:36] -> Running build hook: [autodetect]
    [2012-11-23 21:36] -> Running build hook: [filesystems]
    [2012-11-23 21:36] -> Running build hook: [usbinput]
    [2012-11-23 21:36] ==> Generating module dependencies
    [2012-11-23 21:36] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-11-23 21:36] ==> Image generation successful
    [2012-11-23 21:36] ==> Building image from preset: 'fallback'
    [2012-11-23 21:36] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-11-23 21:36] ==> Starting build: 3.6.7-1-ARCH
    [2012-11-23 21:36] -> Running build hook: [base]
    [2012-11-23 21:36] -> Running build hook: [udev]
    [2012-11-23 21:36] -> Running build hook: [pata]
    [2012-11-23 21:36] -> Running build hook: [scsi]
    [2012-11-23 21:36] -> Running build hook: [sata]
    [2012-11-23 21:36] -> Running build hook: [filesystems]
    [2012-11-23 21:36] -> Running build hook: [usbinput]
    [2012-11-23 21:36] ==> Generating module dependencies
    [2012-11-23 21:36] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-11-23 21:36] ==> Image generation successful
    [2012-11-23 21:36] upgraded linux (3.6.6-1 -> 3.6.7-1)
    [2012-11-23 21:36] upgraded logrotate (3.8.2-1 -> 3.8.2-2)
    [2012-11-23 21:36] upgraded ntfs-3g (2012.1.15-3 -> 2012.1.15-4)
    [2012-11-23 21:36] upgraded ntfsprogs (2012.1.15-3 -> 2012.1.15-4)
    [2012-11-23 21:36] installed gtkglext (1.2.0-9)
    [2012-11-23 21:36] upgraded opencv (2.4.3-2 -> 2.4.3-3)
    [2012-11-23 21:36] upgraded shadow (4.1.5.1-1 -> 4.1.5.1-2)
    [2012-11-23 21:36] upgraded thunderbird (16.0.2-1 -> 17.0-1)
    [2012-11-23 21:36] upgraded thunderbird-i18n-en-gb (16.0.2-1 -> 17.0-1)
    [2012-11-23 21:36] Updating font cache... done.
    [2012-11-23 21:36] upgraded ttf-liberation (2.00.1-1 -> 2.00.1-2)
    [2012-11-23 21:36] upgraded vi (1:050325-2 -> 1:050325-3)
    [2012-11-23 21:40] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.mEd/dirsyncpro-1.45-1-i686.pkg.tar.xz'
    [2012-11-23 21:40] upgraded dirsyncpro (1.44-1 -> 1.45-1)
    [2012-11-23 21:44] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.KyH/muffin-git-20121123-1-i686.pkg.tar.xz'
    [2012-11-23 21:44] upgraded muffin-git (20120610-1 -> 20121123-1)
    [2012-11-23 21:45] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.6mB/shutter-0.89.1-1-i686.pkg.tar.xz'
    [2012-11-23 21:45] upgraded shutter (0.88.3-1 -> 0.89.1-1)
    [2012-11-23 21:45] Running 'pacman -U /tmp/yaourt-tmp-john/PKGDEST.MTz/unix-runescape-client-3.9.4-1-any.pkg.tar.xz'
    [2012-11-23 21:45] ==> for compatibility mode to work, you need to install 'wine' and any windows jre inside it.
    [2012-11-23 21:45] upgraded unix-runescape-client (3.9.2-2 -> 3.9.4-1)
    Any ideas?
    Last edited by PTBM133A4X (2012-11-27 21:24:49)

    PTBM133A4X wrote:
    SIGTERM wrote:Try downgrading accountsservice to 0.6.25.
    WOW! That did it
    Could you explain what happened or why this fixed it please?
    Thanks for your help.
    I don't know the details to be honest, but the title of your post basically describes my situation with GDM when I used accountsservice >0.6.25, so I figured it was worth a shot, since the symptoms were the same.
    Also, Cinnamon depends on accountsservice if I'm not mistaken, so it didn't seem unreasonable that the update broke Cinnamon too.
    I'm glad it works now. Let's hope a updated, working version of accountsservice is released soon.

  • Xorg: blank screen, mouse cursor only - ATI Radeon HD3450

    Last friday, my old Nvidia card died (overheated, I think). I got a replacement today: an ATI HD3450 card by Asus (R600 series). This is an old PC with an AGP slot, so my options were unfortunately limited. I was looking for a Nvidia replacement originally, to avoid having to reconfigure stuff, but that turned out to be too hard. So I got an ATI card instead. I regret this decision now... it works fine in console mode, but I can't get it to work in X.
    I've tried radeon and radeonhd drivers. I'm reluctant to try catalyst, seeing as they do not support the current kernel version (2.6.32) and I don't want to downgrade.
    radeonhd (xf86-video-radeonhd) is just a disaster. When I try to start X, all I see is a screen which is mostly black, except for a garbled band of about 1/4th the screen height, mostly white with some random colours thrown in.
    radeon (xf86-video-ati) doesn't work either. When X starts, all I see is the mouse cursor. And nothing else. Just a black screen with a mouse cursor. The funny thing is, it's all there, I just can't see it. When I tried "startxfce4", the cursor would change shapes when it was over window edges or text boxes. But they were invisible. Too bad.
    When I run "startx" as root, I see a couple of twm windows (the default configuration, I normally don't use X as root), and I can interact with them, but it's as if the screen isn't refreshed properly. When I move a window, it isn't redrawn, but it was definitely moved, because when I enter text in it, the text appears at the new position. The 'vesa' driver works, but I can't use that for obvious reasons.
    I have read the wiki article about ATI drivers and tried some of the things mentioned there (no xorg.conf, simple xorg.conf with some combinations of the sections mentioned, ...). I'm pretty sure the problem isn't KMS-related, because it's disabled by default with the 2.6.32 kernel.
    What pisses me off the most is that I get no error messages whatsoever, so I haven't a clue what could be the problem. I'm working on getting some Xorg.0.log output in this thread ASAP.
    Anybody have any idea what could cause this? I would really like to get this working soon. It would kinda suck if it turns out I've replaced an unusable graphics card with another unusable graphics card.
    If the radeonhd problem is easier to solve, then solutions for that are welcome as well. I just need a working driver that can handle compiz, and doesn't require me to downgrade my kernel.
    EDIT: Xorg.0.log contents, enjoy!
    X.Org X Server 1.7.5
    Release Date: 2010-02-16
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.32-ARCH i686
    Current Operating System: Linux arch 2.6.32-ARCH #1 SMP PREEMPT Tue Feb 9 14:46:08 UTC 2010 i686
    Kernel command line: root=/dev/sda6 ro vga=838 radeon.modeset=0
    Build Date: 17 February 2010 07:52:42PM
    Current version of pixman: 0.16.6
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Mar 2 17:45:35 2010
    (II) Loader magic: 0x81e4ca0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 6.0
    X.Org XInput driver : 7.0
    X.Org Server Extension : 2.0
    (++) using VT number 7
    (--) PCI:*(0:1:0:0) 1002:95c6:1043:0028 ATI Technologies Inc RV620 LE AGP [Radeon HD 3450] rev 0, Mem @ 0xe0000000/268435456, 0xf9000000/65536, I/O @ 0x00009000/256, BIOS @ 0x????????/131072
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    Section "Device"
    Identifier "Builtin Default ati Device 0"
    Driver "ati"
    EndSection
    Section "Screen"
    Identifier "Builtin Default ati Screen 0"
    Device "Builtin Default ati Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default vesa Device 0"
    Driver "vesa"
    EndSection
    Section "Screen"
    Identifier "Builtin Default vesa Screen 0"
    Device "Builtin Default vesa Device 0"
    EndSection
    Section "Device"
    Identifier "Builtin Default fbdev Device 0"
    Driver "fbdev"
    EndSection
    Section "Screen"
    Identifier "Builtin Default fbdev Screen 0"
    Device "Builtin Default fbdev Device 0"
    EndSection
    Section "ServerLayout"
    Identifier "Builtin Default Layout"
    Screen "Builtin Default ati Screen 0"
    Screen "Builtin Default vesa Screen 0"
    Screen "Builtin Default fbdev Screen 0"
    EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) | |-->Monitor "<default monitor>"
    (**) | |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AutoAddDevices.
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.1.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    compiled for 1.7.3.902, module version = 6.12.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "vesa"
    (WW) Warning, couldn't open module vesa
    (II) UnloadModule: "vesa"
    (EE) Failed to load module "vesa" (module does not exist, 0)
    (II) LoadModule: "fbdev"
    (WW) Warning, couldn't open module fbdev
    (II) UnloadModule: "fbdev"
    (EE) Failed to load module "fbdev" (module does not exist, 0)
    (II) RADEON: Driver for ATI Radeon chipsets:
    ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    ATI Radeon 9800XT NJ (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835,
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE),
    ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE),
    ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    ATI FirePro M5750, ATI Radeon RV730 (AGP),
    ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    ATI Mobility Radeon HD 3850 X2, ATI RV670,
    ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    ATI FireGL V3600, ATI Radeon HD 2600 LE,
    ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    ATI Mobility Radeon 4100, ATI RS880
    (II) Primary Device is: PCI 01@00:00:0
    (II) RADEON(0): TOTO SAYS 00000000f9000000
    (II) RADEON(0): MMIO registers at 0x00000000f9000000: size 64KB
    (II) RADEON(0): PCI bus 1 card 0 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    "Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 0.1.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon HD 3450" (ChipID = 0x95c6)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): AGP card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom:
    SubsystemVendorID: 0x1043 SubsystemID: 0x0028
    IOBaseAddress: 0x9000
    Filename: SV31552.bin
    BIOS Bootup Message:
    95C6.10.88.0.19.AS02
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0x1fffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0x1fffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 600000
    (II) RADEON(0): Default Memory Clock: 400000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 27000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    (II) RADEON(0): Will not try to use DMA for Xv image transfers
    (II) RADEON(0): Detected total video RAM=524288K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (64 bit DDR SDRAM)
    (II) RADEON(0): Color tiling disabled
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 120000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 600.000000, mclk: 400.000000
    (II) RADEON(0): PLL parameters: rf=2700 rd=12 min=64800 max=120000; xclk=40000
    Shared DDC line: 0 3
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output HDMI-0 has no monitor section
    (II) RADEON(0): I2C bus "HDMI-0" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
    XRANDR name: VGA-0
    Connector: VGA
    CRT1: INTERNAL_KLDSCP_DAC1
    DDC reg: 0x7e40
    (II) RADEON(0): Port1:
    XRANDR name: HDMI-0
    Connector: HDMI-A
    DFP1: INTERNAL_UNIPHY
    DDC reg: 0x7e60
    (II) RADEON(0): Port2:
    XRANDR name: DVI-0
    Connector: DVI-I
    CRT2: INTERNAL_KLDSCP_DAC2
    DFP2: INTERNAL_KLDSCP_LVTMA
    DDC reg: 0x7e50
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "HDMI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
    finished output detect: 1
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): I2C device "DVI-0:DDC control interface" registered at address 0x6E.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
    (II) RADEON(0): Year: 2007 Week: 26
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing not preferred mode in violation of standard!
    (II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
    (II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x864@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
    (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    (II) RADEON(0): Serial No: 00673
    (II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEON(0): Monitor name: H-W22 DVI
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0005232300a1020000
    (II) RADEON(0): 1a110103802f1e78e837a0a655489a26
    (II) RADEON(0): 125054bfef808140818081c09500950f
    (II) RADEON(0): b300010101017c2e90a0601a1e403020
    (II) RADEON(0): 3600d62c1100001a000000ff00303036
    (II) RADEON(0): 37330a20202020202020000000fd0037
    (II) RADEON(0): 4b18530f000a202020202020000000fc
    (II) RADEON(0): 00482d573232204456490a2020200061
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: HDMI-0, Detected Monitor Type: 0
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 3
    (II) RADEON(0): EDID data from the display on output: DVI-0 ----------------------
    (II) RADEON(0): Manufacturer: AIC Model: 23 Serial#: 673
    (II) RADEON(0): Year: 2007 Week: 26
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 47 vert.: 30
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): DPMS capabilities: StandBy Suspend Off
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    (II) RADEON(0): First detailed timing not preferred mode in violation of standard!
    (II) RADEON(0): redX: 0.648 redY: 0.335 greenX: 0.282 greenY: 0.604
    (II) RADEON(0): blueX: 0.150 blueY: 0.072 whiteX: 0.312 whiteY: 0.328
    (II) RADEON(0): Supported established timings:
    (II) RADEON(0): 720x400@70Hz
    (II) RADEON(0): 640x480@60Hz
    (II) RADEON(0): 640x480@67Hz
    (II) RADEON(0): 640x480@72Hz
    (II) RADEON(0): 640x480@75Hz
    (II) RADEON(0): 800x600@56Hz
    (II) RADEON(0): 800x600@60Hz
    (II) RADEON(0): 800x600@72Hz
    (II) RADEON(0): 800x600@75Hz
    (II) RADEON(0): 832x624@75Hz
    (II) RADEON(0): 1024x768@60Hz
    (II) RADEON(0): 1024x768@70Hz
    (II) RADEON(0): 1024x768@75Hz
    (II) RADEON(0): 1280x1024@75Hz
    (II) RADEON(0): 1152x864@75Hz
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported standard timings:
    (II) RADEON(0): #0: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    (II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    (II) RADEON(0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    (II) RADEON(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    (II) RADEON(0): #4: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 119.0 MHz Image Size: 470 x 300 mm
    (II) RADEON(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    (II) RADEON(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    (II) RADEON(0): Serial No: 00673
    (II) RADEON(0): Ranges: V min: 55 V max: 75 Hz, H min: 24 H max: 83 kHz, PixClock max 150 MHz
    (II) RADEON(0): Monitor name: H-W22 DVI
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 00ffffffffffff0005232300a1020000
    (II) RADEON(0): 1a110103802f1e78e837a0a655489a26
    (II) RADEON(0): 125054bfef808140818081c09500950f
    (II) RADEON(0): b300010101017c2e90a0601a1e403020
    (II) RADEON(0): 3600d62c1100001a000000ff00303036
    (II) RADEON(0): 37330a20202020202020000000fd0037
    (II) RADEON(0): 4b18530f000a202020202020000000fc
    (II) RADEON(0): 00482d573232204456490a2020200061
    (II) RADEON(0): Panel infos found from DDC detailed: 1680x1050
    (II) RADEON(0): EDID vendor "AIC", prod id 35
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output HDMI-0 disconnected
    (II) RADEON(0): Output DVI-0 connected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output DVI-0 using initial mode 1680x1050
    (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    after xf86InitialConfiguration
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Will attempt to use R6xx/R7xx EXA support if DRI is enabled.
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules/libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.7.5, module version = 2.5.0
    ABI class: X.Org Video Driver, version 6.0
    (!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (--) Depth 24 pixmap format is 32 bpp
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (==) RADEON(0): Using 24 bit depth buffer
    mc fb loc is 00ff00e0
    (II) RADEON(0): RADEONInitMemoryMap() :
    (II) RADEON(0): mem_size : 0x20000000
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Allocating from a screen of 262144 kb
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00b7c000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00b80000
    (II) RADEON(0): Will use 11760 kb for front buffer at offset 0x00000000
    (II) RADEON(0): Will use 11760 kb for back buffer at offset 0x00b84000
    (II) RADEON(0): Will use 11760 kb for depth buffer at offset 0x01700000
    (II) RADEON(0): Will use 112640 kb for textures at offset 0x0227c000
    (II) RADEON(0): Will use 114192 kb for X Server offscreen at offset 0x0907c000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 10, (OK)
    drmOpenByBusid: drmOpenMinor returns 10
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [agp] Mode 0x1f00421b [AGP 0x10de/0x00e1; Card 0x1002/0x95c6 0x1043/0x0028]
    (II) RADEON(0): [agp] 32768 kB allocated with handle 0x00000001
    (II) RADEON(0): [agp] ring handle = 0xf0000000
    (II) RADEON(0): [agp] Ring mapped at 0xb712c000
    (II) RADEON(0): [agp] ring read ptr handle = 0xf0101000
    (II) RADEON(0): [agp] Ring read ptr mapped at 0xb72fb000
    (II) RADEON(0): [agp] vertex/indirect buffers handle = 0xf0102000
    (II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xa6ebd000
    (II) RADEON(0): [agp] GART texture map handle = 0xf0302000
    (II) RADEON(0): [agp] GART Texture map mapped at 0xa523d000
    (II) RADEON(0): [drm] register handle = 0x2f200000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 16
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0): MC_FB_LOCATION was: 0x00ff00e0 is: 0x00ff00e0
    (WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0x0000de00
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Setting EXA maxPitchBytes
    (II) EXA(0): Offscreen pixmap area of 116932608 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II) Solid
    (II) Copy
    (II) Composite (RENDER acceleration)
    (II) RADEON(0): Acceleration enabled
    (==) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Mode 1680x1050 - 1840 1080 9
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    freq: 119000000
    best_freq: 119000000
    best_feedback_div: 119
    best_ref_div: 3
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
    (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Output DIG2 encoder setup success
    Output DIG2 encoder setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 disable success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Mode 1680x1050 - 1840 1080 9
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x0000de00
    freq: 119000000
    best_freq: 119000000
    best_feedback_div: 119
    best_ref_div: 3
    best_post_div: 9
    (II) RADEON(0): crtc(0) Clock: mode 119000, PLL 119000
    (II) RADEON(0): crtc(0) PLL : refdiv 3, fbdiv 0x77(119), pdiv 9
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Output DIG2 encoder setup success
    Output DIG2 encoder setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:00.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r600_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 444 x 277
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    compiled for 1.7.3, module version = 2.3.2
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 7.0
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Found relative axes
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Configuring as mouse
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
    (**) Macintosh mouse button emulation: (accel) acceleration profile 0
    (II) Macintosh mouse button emulation: initialized for relative axes.
    (II) config/hal: Adding input device PS2++ Logitech MX Mouse
    (**) PS2++ Logitech MX Mouse: always reports core events
    (**) PS2++ Logitech MX Mouse: Device: "/dev/input/event4"
    (II) PS2++ Logitech MX Mouse: Found 12 mouse buttons
    (II) PS2++ Logitech MX Mouse: Found scroll wheel(s)
    (II) PS2++ Logitech MX Mouse: Found relative axes
    (II) PS2++ Logitech MX Mouse: Found x and y relative axes
    (II) PS2++ Logitech MX Mouse: Configuring as mouse
    (**) PS2++ Logitech MX Mouse: YAxisMapping: buttons 4 and 5
    (**) PS2++ Logitech MX Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device "PS2++ Logitech MX Mouse" (type: MOUSE)
    (**) PS2++ Logitech MX Mouse: (accel) keeping acceleration scheme 1
    (**) PS2++ Logitech MX Mouse: (accel) acceleration profile 0
    (II) PS2++ Logitech MX Mouse: initialized for relative axes.
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event2"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) config/hal: Adding input device Power Button
    (**) Power Button: always reports core events
    (**) Power Button: Device: "/dev/input/event3"
    (II) Power Button: Found keys
    (II) Power Button: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "us"
    (II) AIGLX: Suspending AIGLX clients for VT switch
    (II) RADEON(0): DIG0 transmitter: Coherent Mode enabled
    Output DIG0 transmitter setup success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Disable CRTC memreq 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Disable CRTC memreq 1 success
    (II) RADEON(0): RADEONRestoreMemMapRegisters() :
    (II) RADEON(0): MC_FB_LOCATION : 0x00ff00e0 0x00ff00e0
    (II) RADEON(0): MC_AGP_LOCATION : 0x00000000
    (II) RADEON(0): avivo_restore !
    Enable CRTC memreq 0 success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Another update: the card seems to work just fine under windows, so it is definitely a configuration or driver issue.
    Last edited by Sander (2010-03-02 17:12:40)

    "Enabling KMS will make Xorg fall back to software rasterizing, at the cost of 3D performance. " <- is this still true at the moment? In that case, enabling KMS really isn't the solution I'm looking for. Back to square one
    This is not true.  Software rasterization indicates that KMS was not set up correctly.  You will get 3D acceleration with KMS correctly configured.
    Thanks for taking the time to reply
    I'll give enabling KMS a try. What thread is it that you're talking about? Also should I follow the "early start" or "late start" instructions?
    EDIT: I'm guessing you mean this one? http://bbs.archlinux.org/viewtopic.php?pid=613720
    That thread is the one I meant. 
    Your xf86-video-ati doesn't have support for KMS - you have to rebuild it against libdrm_radeon. This also means that you have to rebuild mesa against same new libdrm because mesa doesn't have KMS support without libdrm_radeon either.
    Is this information applicable to my situation? No instructions on how to do this are provided, so I have no idea how to try it, or if it's worth trying at all.
    Yes, this is a problem.  You have to modify a PKGBUILD or two and build/install the packages in the correct order.  I detail the right way to do everything below.
    I used the following packages:
    * kernel26-git: http://aur.archlinux.org/packages.php?ID=25304 (you must configure with CONFIG_DRM_RADEON=m. CONFIG_DRM_RADEON_KMS=y enables KMS by default.  you should be presented with a configuration menu when the package builds.  type '/' to search.)
    * kernel26-firmware-git: http://aur.archlinux.org/packages.php?ID=25782
    * radeon_ucode: http://aur.archlinux.org/packages.php?ID=33016
    * libdrm-git: http://aur.archlinux.org/packages.php?ID=10254 (you must edit the PKGBUILD to enable radeon support, see below)
    * glproto-git: http://aur.archlinux.org/packages.php?ID=18964
    * dri2proto-git: http://aur.archlinux.org/packages.php?ID=19051
    * libgl-git: http://aur.archlinux.org/packages.php?ID=19044 (this is out of date and requires a patch.  see my comment on the AUR page)
    * mesa-git: http://aur.archlinux.org/packages.php?ID=8266 (you can reuse src/mesa from libgl-git, it clones the same repository)
    * xf86-video-ati-git: http://aur.archlinux.org/packages.php?ID=15374 (you can reuse src/mesa from libgl-git)
    libdrm-git PKGBUILD:
    sh autogen.sh --prefix=/usr \
    --enable-nouveau-experimental-api \
    --enable-udev || return 1
    # --enable-radeon-experimental-api
    libdrm-git PKGBUILD modified:
    sh autogen.sh --prefix=/usr \
    --enable-radeon-experimental-api \
    --enable-udev || return 1
    Install those packages in that order and add yourself to the video group.  Make sure that your grub configuration has an option to select the new kernel.  Also make sure all of your PKGBUILDs from AUR are up to date.  A week or two ago they were all wrong (as a noted above, one of them is still wrong and requires a patch).
    I hope that helps.  Eventually Arch will support KMS for radeon by default, but the driver and the kernel need to go through another release or two.
    Last edited by tss (2010-03-02 20:34:52)

Maybe you are looking for