ANM in High Availability installation

ANM 1.1 in HA mode during installation,
Do the Primary NICS need to be L2
adjacent or could be a router hop inbetween ?
Do the Heartbeat NICs need to be L2
adjacent or could be a router hop inbetween ?

In ANM in High availablity mode the primary NICs need not to be L2 adjacent but the Heartbeat NICs should be L2 adjacent. Following link may help you
http://www.cisco.com/en/US/products/ps6904/products_installation_guide_chapter09186a00807b054c.html#wp3160275

Similar Messages

SAP NetWeaver 7.30 High-Availability installation without MSCS

Hi all,
Do we have any option to install SAP NetWeaver 7.30 High-Availability System on the third-party cluster solution, except for MS Cluster Service?
I tried to install the first cluster node without MSCS configuration, however, sapinst.exe checks whether we already set up MSCS on this node, then installer aborted.
I'd like to know the way to disable this checks. (Or, way to mimic the installer as if MSCS cluster configuration was done.)
If unavailable, I have to install MSCS first, and SAP NetWeaver, then also have to uninstall MSCS instead of out cluster software;
It seems to me no sense.
Best regards,

Hi Peter,
Thanks for your quick response.
It is disappointed for me that HA Installation is tightly combined with MSCS.
Do we have a way to migrate from other installation scenario to High-Availability?
For example, once we install ASCS instance as distributed system, then migrate
it for High-Availability usage, leveraged by profile updates and so on?
I'm not sure how High-Availability installation is different from other installation
scenario except for installation path and hostname to be used for connection.
Best regards,

Oracle Version - High Availability Installation

Hi,
We are shortly to install SAP on Windows2008/Oracle.
The DEV and TEST systems are to be installed as stand alone Centralised installations.
The LIVE system is to be installed as a High Availability system, clustered over two hosts.
I have questions surrounding the Oracle Editions:
Looking at the differences between the two Oracle editions in respect to our requirements, Enterprise supports fail-over, whereas Standard does not.
So,
Does an SAP high availability installation require Oracle Enterprise Edition to be installed or can it be Oracle Standard Edition?
Does SAP's High Availability installation functionality handle the complete failover, regardless of Oracle Version?
Thanks in advance for your assistance.
Chris

> Does an SAP high availability installation require Oracle Enterprise Edition to be installed or can it be Oracle Standard Edition?
SAP systems (also for test and QA) always require Oracle Enterprise edition. You may get it technically to work with the standard edition but it's not supported:
Note 105047 - Support for Oracle functions in the SAP environment
<...>
56. Standard Edition
* SAP products always require the Oracle Enterprise edition, using Oracle Standard edition is not permitted.
<...>
Markus

High Availability Installation issue (ASCS instance did not stop)?

Hi,
We are facing an issues in High availability system installation. (ERP ECC6.0 EHP5) We have completed Node A installation.
We are installing based on Virtual IP.
Node A Installation:
Steps 1: ASCS instance
Step 2 : DB Instance
Step 3: Enqueue replciation Server istance
Step 4: Central instance
I have complete these steps successfully. But We have started Node B installation. We have faced error in Node B. Error is on ASCS instance.
Error Details: "SID/ASCS00(partially) did not stop. " In ASCS instance 5th phase, we are getting this error.
Due to this error, We are not able to continue the process.
Could you please help to solve this.
Thanks!!!

Hi Sir/Madam
I have one to install SAP cluster with two node with window server 2003 x64 R2, SQL server 2005.
below it is my step.
1. assume my window cluster and sql server are working fine.
2. I have start install ASCS on virtual disk from node 1.
3. i have install First MSCS on virtual from node 1.
4. I have install Database instance on virtual disk from node 1.
5. I have install Second MSCS on virtual from node2.
6 I have install ERS on physic disk on node 1.
7. i have instgall ERS on physic disk on node2.
8 i have install CI on physic disk on node 1
9 i have install DI on physic disk on node 2.
this is procedure that my consultant have set up on my real sap system . but when I try to install on lab . i got error when i finish on step 5 above .
could you please tell me the above step is correct or not ?
thanks .

High Availability Installation - Help

Hi All,
we are planning for high availabitlity installation for ECC 6.0/oracle 10.2 on HP-UX,
i understand that we need atleast two identical physical machines of HP-UX,
Please help me in below things :
1. link or any document for HA installation (apart from normal inst guide)
2. i have installed ECC 6.0 o HP-UX for dev/qa will the file system remain same for
HA installation also or what changes required ?
3. Any hints on installation procedure.
we have only abap engine involved.
Thanking you in advance
All the valid replied will be appreciated and rewarded.
Regards
Naren

Hello,
Here is the link for HA installation : https://websmp209.sap-ag.de/instguides --> SAP NetWeaver --> Installation --> Oracle --> HP-UX --> ABAP, here you can find everything on HA.
You have to configure your filesystem in cental location, you can not use the same file system as DEV/QA becuase you have not configured the same in HA.
OS level HA configuration will be done by UNIX admin and after that you have to install SAP as per normal procedure only few changes which you can findout if you go thourgh the installation guide.
Cheers,
-Sunil

FIM Portal in High Availability Installation

Hi Team,
I am working on something and trying to perform HA in FIM. Below is my current system:
1) server A and B for SQL DB.
2) Server C and D for FIM Portal.
3) Server E for FIM Service.
4) Server F For FIMSync Service.
Steps I have performed:
Installed SQL on server A & B for Every Required DB and done Clustering.
1) Installed FIMSync service on server F.
2) Installed FIM Service on Server E.
3) Installed SharePoint 2010 Foundation server Farm Installation on Server C.
4) Installed FIM Portal on Server C.
5) Installed SharePoint 2010 Foundation with same Farm on Server D and FIM Portal as well.
But when I try to access FIM Portal with Server D's Host name then it is showing error "Service Unavailable".
Please help !!!!!
Thanks~ Giriraj Singh Bhamu

Make sure you have correct SPNs registered and that you have provided correct address of FIMService for FIMPortal. Remember also about delegation needed to be configured.
SPNs to be registered:
FIMService/<ServerE> Domain\FIMserviceAccount
HTTP/<ServerC> Domain\FIMWebAppAccount
Delegation: FimServiceAccount to FIMserviceAccount and FIMWebAppPoolAccount to FIMServiceAccount.
"Service Unavailable" is telling you nothing. Examine Eventvwr.
By the way - this installation hardly seems to be HA - what if your Server E would fail? There is no other server that has FIMService installed. The same for ServerF
If you found my post helpful, please give it a Helpful vote. If it answered your question, remember to mark it as an Answer.

Migrating Dimension Server from local installation to High Availability

Hi Team,
When Hyperion was installed on the client site (11.1.2.3), there was no requirement for EPMA to become highly available.
Now that has become a requirement to make it highly available in the event that one of the virtual machine is unreachable.
In the event that a server becomes unavailable, it is acceptable for a manual failover procedure to be done.
What steps can be taken to prepare for such an event?
Possible outcome:
Configure another dimension server on the second Virtual machine and leave it manually switched off.
Modify the IIS path to point to a clustered location accessible by both machines.
In the event of a failover, manually bring up the dimension server on the other machine.
This is yet to be implemented successfully.
Current Scenerio:
1 x Windows Machine hosting:
Foundation Services
Calculation Manager
Performance Architect
Planning
Reporting and Analysis
Repository location on a shared mount (Clustered filesystem)
FDQM
Essbase
Analytic Provider Services
Essbase Integration Services (not used)
Essbase Studio (not used)
1 x Linux Machine
Essbase Server
Arborpath on a shared mount
Aim: Add 2 new Virtual Machines ( 1 x Windows App Server + 1 x Linux Essbase Server) for high availability.
Progress:
Windows Machine components clustered:
Foundation Services
Calculation Manager
Planning
Reporting and Analysis
Essbase
Analytic Provider Services
Linux Essbase Machines:
Configured Active/Passive using OPMN
Challenge faced:
Failover scenerio can be a manual list of steps to provide functionaility.
Please provide support on introducing failover steps for dimension server.

Remote Desktop/Preferences/Task Server
Add the FQDN or I.P address of your server in this pane on your book(basically your pointing your book to your installed software on the other machine). Setup your server with the installs you want it to make, and administer it via your book (or any machines with another unlimited ARD) IF you want report generation, you would schedule the clients to send the info to the server. A task server can only do 2 things, install packages or change client settings, thats it.

FIM installation in High Availability Mode

Experts,
I am planning to install FIM in high availability mode.
FIM Portal on four servers
FIM Service on four servers and
FIM Portal on four servers.
Any document that can guide me for this.
Thanks,
Mann

See these
Preinstallation and Topology Configuration
FIM 2010 high availability
I also recommend this FIM book by David & Brad
FIM R2 Best Practices Volume 1: Introduction, Architecture And Installation Of Forefront Identity Manager 2010 R2

INSTALLATION ON HIGH AVAILABILITY USING WEBLOGIC SERVER

Hi All ,
IHAC where i am planning to propose the following architecture and I did not find much information on the OTN documentation
How to configure the BI Publisher for High Availability using Oracle Weblogic Server. I have gone thorugh the following document on OTN.
http://www.oracle.com/technology/products/xml-publisher/docs/BIP_HA.pdf
1) Can the BI Publisher be installed on a weblogic cluster having two nodes. I did not find any specific information on this in the BI publisher documents other than the link I mentioned above. Do we have any Enterprise Deployment guide for standalone BI Publisher ?
2) What is the best practice to implement the High Availability of BI Publisher on weblogic server.
Other info,
As mentioned in the above link I am planning to use the BIPublisher ultra scalable architecture.
Where the Load Balancer is HW load balancer and Internal load balancer is managed using the Apache configuration and Oracle XMLDB11.1.0.7 is used as the shared repository.
regards,
Pierre .

Hi
You have to have a shared drive for CI,SCS abd DB on the shared drive something like SAN.
You will have HACMP the IBM Cluster SW shall be configured and installed properly.
You may need support from the AIX engineer to configure it.
DB and CI installation will be done by Basis normally.
Yes ,there is arequirement to install and db and OS Filesystems on shared drive.
For further information ,you can look for inst guide at service.sap.com/instguides
Hope it helps.

SharePoint Foundation 2013 - Can we use the foundation for intranet portal with high availability ( medium farm)

Today I had requirement, where we have to use the SharePoint Foundation 2013 (free version) to build an intranet portal ( basic announcement , calendar , department site , document management - only check-in check-out / Version).
Please help me regarding the license and size limitations. ( I know the feature comparison of Standard / Enterprise) I just want to know only about the installation process and license.
6 Server - 2 App / 2 Web / 2 DB cluster ( so total license 6 windows OS license , 2 SQL Server license and Guess no sharepoint licenes)

Thanks Trevor,
Is load balance service also comes in free license... So, in that case I can use SharePoint Foundation 2013 version for building a simple Intranet & DMS ( with limited functionality). And for Workflow and content management we have to write code.
Windows Network Load Balancing (the NLB feature) is included as part of Windows Server and would offer high availability for traffic bound to the SharePoint servers. WNLB can only associate with up to 4 servers.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Office Web Apps farm - how to make it high available

Hi there,
I have deployed OWAs for Lync 2013 with two servers in one farm. When I was testing, e.g. the case when other server is down I found out the following error:
Log Name:      Microsoft Office Web Apps
Source:        Office Web Apps
Date:          17/03/2014 22:59:54
Event ID:      8111
Level:         Error
Computer:      OWASrv02.domain.com
Description:
A Word or PowerPoint front end failed to communicate with backend machine
http://OWASrv01:809/pptc/Viewing.svc
Does that means, that OWAs cannot setup as high avaiable when using standalone OWAs only? Above error appeared when the server OWASrv01 was rebooting.
Petri

Hi Petri,
For your scenario, you have achieve a  high performance for your Office Web Apps farm but not high availability.
For performing a high availability Office Web Apps farm, you can refer to the blog:
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers
if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Eric Tao
TechNet Community Support

Error while installing NW 7.4 SR2 in High availability

Hello Guys,
We are installing NW 7.4 SR2 Enterprise Portal with sybase database on windows 2012 R2 server under high availability i.e Microsoft Cluster.
JEP is the system ID of the server, SAPJEP is the virtual host and X.X.X.36 is the virtual I.P for Central Instance node.
Physical I.P of First node is X.X.X.21
We have started the installation as first cluster node and get stuck at phase 3.
The error in sapinst.log is below:-
FCO-00011 The step assignNetworknameToClusterGroup with step key
|NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_GetSidFromCluster|ind|ind|ind|ind|getSid|0|assignNetworknameToClusterGroup
was executed with status ERROR ( Last error reported by the step: Could
not set properties on ClusterResource 'SAP JEP IP'.).
The error log of sapinst_dev.log is is below:-
TRACE      2015-03-18 11:30:29.193
NWInstance.getStartProfilePath(true)
TRACE      2015-03-18 11:30:29.194
NWInstance.getStartProfileName()
TRACE      2015-03-18 11:30:29.194
NWInstance.getStartProfileName() done: JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.194
NWERSInstance.getDirProfile()
TRACE      2015-03-18 11:30:29.194
NW.getDirProfile(false)
TRACE      2015-03-18 11:30:29.195
NW.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE      2015-03-18 11:30:29.204 [synxcpath.cpp:925]
          CSyPath::getOSNodeType(bool) lib=syslib module=syslib
Path \\SAPJEP/sapmnt/JEP/SYS/profile is on a non-existing share.
TRACE      2015-03-18 11:30:29.204
NWERSInstance.getDirProfile() done: \\SAPJEP/sapmnt/JEP/SYS/profile
TRACE      2015-03-18 11:30:29.205
NWInstance.getStartProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.206
NWInstance.getProfilePath() done: \\SAPJEP/sapmnt/JEP/SYS/profile/JEP_ERS10_SAPJEP
TRACE      2015-03-18 11:30:29.206
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.207
NW.getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.207
NW.isUnicode(true)
TRACE      2015-03-18 11:30:29.208
NW.isUnicode() done: true
TRACE      2015-03-18 11:30:29.208
NW.getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.208
NWProfiles(JEP.ERS10.SAPJEP)._getPersistentProfile(INSTANCE) done
TRACE      2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentProfile() done
TRACE      2015-03-18 11:30:29.209
PersistentR3Profile.commit()
TRACE      2015-03-18 11:30:29.209
PersistentR3Profile.commit() done
TRACE      2015-03-18 11:30:29.209
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.210
NW.getPersistentDefaultProfile()
TRACE      2015-03-18 11:30:29.210
NW.isUnicode(true)
TRACE      2015-03-18 11:30:29.211
NW.isUnicode() done: true
TRACE      2015-03-18 11:30:29.211
NW.getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.211
NWProfiles(JEP.ERS10.SAPJEP).getPersistentDefaultProfile() done
TRACE      2015-03-18 11:30:29.211
PersistentR3Profile.commit()
TRACE      2015-03-18 11:30:29.211
PersistentR3Profile.commit() done
TRACE      2015-03-18 11:30:29.212
NWProfiles(JEP.ERS10.SAPJEP).commit() done
TRACE      2015-03-18 11:30:29.212
NWInstanceInstall.addSAPCryptoParametersToProfile() done
TRACE      2015-03-18 11:30:29.260
The step setProfilesForSAPCrypto with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|NW_SAPCrypto|ind|ind|ind|ind|crypto|0 has been executed successfully.
INFO      2015-03-18 11:30:29.262 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:29.265 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.267 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.270 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:29.280 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.281 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.284 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:29.293 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:29.295 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:29.315 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:29.330 [csistepexecute.cpp:1024]
Execute step askUnpack of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0
TRACE      2015-03-18 11:30:29.339 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0|askUnpack returns TRUE
TRACE      2015-03-18 11:30:29.364
Call block: NW_Unpack2_ind_ind_ind_ind
    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpack
is validator: false
TRACE      2015-03-18 11:30:29.364
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:29.366
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:29.366
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:29.367
NWOption(collected).value()
TRACE      2015-03-18 11:30:29.367
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:29.369
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:29.370
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:29.371
NW() done
TRACE      2015-03-18 11:30:29.371
NWInstall() done
TRACE      2015-03-18 11:30:29.371
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:29.372
NWInstall.mapUnpackTable(t_askUnpack)
TRACE      2015-03-18 11:30:29.373
NWInstall.mapUnpackTable() done: true
TRACE      2015-03-18 11:30:29.377
NWDB._get(JEP, ind)
TRACE      2015-03-18 11:30:29.377
NWDB._fromTable(JEP, ctor)
TRACE      2015-03-18 11:30:29.379
NWDB(JEP, {
sid:JEP
hostname:undefined
dbsid:undefined
installDB:false
ORACLE_HOME:
abapSchema:
abapSchemaUpdate:
javaSchema:
TRACE      2015-03-18 11:30:29.379
NWDB() done
TRACE      2015-03-18 11:30:29.379
NWDB._fromTable() done
TRACE      2015-03-18 11:30:29.380
NWDB._get() done
TRACE      2015-03-18 11:30:29.380
NWDB.getDBType(): ind
TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:283]
          CGuiEngineImp::showDialogCalledByJs()
showing dlg d_nw_ask_unpack
TRACE      2015-03-18 11:30:29.390 [iaxxgenimp.cpp:293]
          CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<title>Unpack Archives</title>
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value></value>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:29.391 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2015-03-18 11:30:30.617 [iaxxdlghnd.cpp:96]
          CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2015-03-18 11:30:30.618 [iaxxcdialogdoc.cpp:190]
          CDialogDocument::submit()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:30.646
Call block: NW_Unpack2_ind_ind_ind_ind
    function: NW_Unpack2_ind_ind_ind_ind_DialogPhase_askUnpackValidator_default
is validator: true
TRACE      2015-03-18 11:30:30.646
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:30.648
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:30.648
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:30.649
NWOption(collected).value()
TRACE      2015-03-18 11:30:30.649
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:30.652
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:30.653
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:30.654
NW() done
TRACE      2015-03-18 11:30:30.654
NWInstall() done
TRACE      2015-03-18 11:30:30.654
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:30.655
NWInstall.validateUnpackTable(t_askUnpack)
TRACE      2015-03-18 11:30:30.657
NWInstall.validateUnpackTable(): validating row {
codepage:Unicode
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
ownPath:
path:DBINDEP\SAPEXE.SAR
sid:JEP
unpack:true
TRACE      2015-03-18 11:30:30.659 [tablecpp.cpp:136]
          Table(t_NW_unpack).updateRow({
cd:UKERNEL
codepage:Unicode
confirmUnpack:
destination:E:\usr\sap\JEP\SYS\exe\uc\NTAMD64
list:
needUnpacking:true
ownPath:
path:DBINDEP\SAPEXE.SAR
selectiveExtract:false
sid:JEP
unpack:true
wasUnpacked:false
}, WHERE sid='JEP' AND path='DBINDEP\SAPEXE.SAR' AND codepage='Unicode' AND destination='E:\usr\sap\JEP\SYS\exe\uc\NTAMD64')
updating
TRACE      2015-03-18 11:30:30.661
NWInstall.validateUnpackTable() done
TRACE      2015-03-18 11:30:30.722 [iaxxgenimp.cpp:301]
          CGuiEngineImp::showDialogCalledByJs()
<dialog sid="d_nw_ask_unpack">
<table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table>
<dialog/>
TRACE      2015-03-18 11:30:30.724 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.725 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.728 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.776
The step askUnpack with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_Unpack2|ind|ind|ind|ind|unpack|0 has been executed successfully.
INFO      2015-03-18 11:30:30.778 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:30.780 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.781 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.785 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.802 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.803 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:30.806 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.819 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.842 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:30.908 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:30.909 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:30.963 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:31.139 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:31.142 [csistepexecute.cpp:1024]
Execute step setDisplayNames of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0
TRACE      2015-03-18 11:30:31.177
Call block: NW_FirstClusterNode_ind_ind_ind_ind
    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames_Preprocess
is validator: false
TRACE      2015-03-18 11:30:31.219 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|setDisplayNames returns TRUE
TRACE      2015-03-18 11:30:31.243
Call block: NW_FirstClusterNode_ind_ind_ind_ind
    function: NW_FirstClusterNode_ind_ind_ind_ind_DialogPhase_setDisplayNames
is validator: false
TRACE      2015-03-18 11:30:31.246
NWInstance.byNumberAndRealHost(00, DCEPPRDCI)
TRACE      2015-03-18 11:30:31.246
NWInstance.find()
TRACE      2015-03-18 11:30:31.248
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:31.248
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:31.249
NWOption(collected).value()
TRACE      2015-03-18 11:30:31.249
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:31.252
NWInstance._fromRow({
sid:JEP
name:SCS00
number:00
host:SAPJEP
guid:0
realhost:dcepprdci
type:SCS
installationStatus:installing
startProfileName:JEP_SCS00_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE      2015-03-18 11:30:31.252
NWSCSInstance()
TRACE      2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP)
TRACE      2015-03-18 11:30:31.252
NWInstance(JEP/SCS00/SAPJEP) done
TRACE      2015-03-18 11:30:31.253
NWInstanceInstall()
TRACE      2015-03-18 11:30:31.253
NWInstanceInstall() done
TRACE      2015-03-18 11:30:31.253
NWInstall.getSystem(JEP)
TRACE      2015-03-18 11:30:31.253
NWOption(localExeDir).value()
TRACE      2015-03-18 11:30:31.254
NWOption(localExeDir).value() done: true
TRACE      2015-03-18 11:30:31.254
NWOption(collected).value()
TRACE      2015-03-18 11:30:31.254
NWOption(collected).value() done: true
TRACE      2015-03-18 11:30:31.256
NWInstall({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:31.257
NW({
sid:JEP
sapDrive:E:
dbtype:ind
sapmnt:/sapmnt
hasABAP:false
hasJava:true
isAddinInstallation:undefined
unicode:true
workplace:undefined
loadType:SAP
umeConfiguration:
doMigMonConfig:
useParallelAbapSystemCopy:
dir_profile:\\SAPJEP\sapmnt\JEP\SYS\profile
os4_krnlib:
os4_seclanglib:
useCurrentUser:false
noShares:false
TRACE      2015-03-18 11:30:31.258
NW() done
TRACE      2015-03-18 11:30:31.258
NWInstall() done
TRACE      2015-03-18 11:30:31.258
NWInstall.getSystem() done
TRACE      2015-03-18 11:30:31.258
NWSCSInstance() done
TRACE      2015-03-18 11:30:31.259
NWInstance._fromRow() done
TRACE      2015-03-18 11:30:31.259
NWInstance._fromRow({
sid:JEP
name:ERS10
number:10
host:SAPJEP
guid:1
realhost:dcepprdci
type:ERS
installationStatus:installing
startProfileName:JEP_ERS10_SAPJEP
instProfilePath:
dir_profile:
unicode:false
collectSource:
TRACE      2015-03-18 11:30:31.259
NWERSInstance()
TRACE      2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP)
TRACE      2015-03-18 11:30:31.260
NWInstance(JEP/ERS10/SAPJEP) done
TRACE      2015-03-18 11:30:31.260
NWInstanceInstall()
TRACE      2015-03-18 11:30:31.260
NWInstanceInstall() done
TRACE      2015-03-18 11:30:31.261
NWERSInstance() done
TRACE      2015-03-18 11:30:31.261
NWInstance._fromRow() done
TRACE      2015-03-18 11:30:31.261
NWInstance.find() done: 1 instances found
TRACE      2015-03-18 11:30:31.261
t_scs.setDisplayName([nw.progress.installInstance, SCS00], WHERE ROWNUM=0)
TRACE      2015-03-18 11:30:31.305
The step setDisplayNames with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0 has been executed successfully.
INFO      2015-03-18 11:30:31.307 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:31.362
Build Client for subcomponent |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_FinishFirstClusterNode|ind|ind|ind|ind|finishFirst|0
TRACE      2015-03-18 11:30:31.364
TRACE      2015-03-18 11:30:31.364 [ccdclient.cpp:22]
          CCdClient::CCdClient()
TRACE      2015-03-18 11:30:31.385 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.387 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\inifile.xml
TRACE      2015-03-18 11:30:31.390 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:31.406 [cpropertycontentmanager.hpp:220]
          CPropertyContentManager::logMissingParameters()
The following parameters can be set via SAPINST_PARAMETER_CONTAINER_URL (inifile.xml) but not via SAPINST_INPUT_PARAMETERS_URL:
Component 'NW_ERS_Instance': ersInstanceNumber, restartSCS
Component 'NW_GetDomainOU': isOUInstallation, ou_delimiter, windows_domain_ous
Component 'NW_GetSidFromCluster': clusterGroup, isUnicode, localDrive, network, networkName, sharedDrive, sid, useDHCP
Component 'NW_GetUserParameterWindows': sapDomain, sapServiceSIDPassword, sidAdmPassword
Component 'NW_SAPCrypto': installSAPCrypto
Component 'NW_SCS_Instance': instanceNumber, scsMSPort, scsMSPortInternal
Component 'Preinstall': installationMode
INFO      2015-03-18 11:30:31.802 [synxcpath.cpp:799]
          CSyPath::createFile() lib=syslib module=syslib
Creating file C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\summary.html.
TRACE      2015-03-18 11:30:31.828 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.852 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:31.916 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:31.917 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:31.971 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:32.152 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:32.154 [sixxbsummary.cpp:320]
          CSiSummaryContainer::showDialog()
<?xml version="1.0" encoding="UTF-8"?><sapinstgui version="1.0"><dialog version="1.0" sid="diReviewDialog"> <title>Parameter Summary</title><description>Choose 'Next' to start with the values shown. Otherwise, select the parameters to be changed and choose 'Revise'. You are then taken to the screen where you can change the parameter. You might be guided through other screens that have so far been processed.</description> <review id="review_controll"><caption><![CDATA[Parameter list]]></caption><inputgroup id="ID_1"> <caption><![CDATA[Drive for Local Instances]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_2"><pulldown edit="false" enabled="true" highlight="false" sid="localDrive">
<caption>Destination Drive for Local Instances</caption>
<helpitem id="mscs.SelectLocalDrive"/>
<value>C:</value>
<value>D:</value>
<selectvalue>D:</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_3"> <caption><![CDATA[SAP System Cluster Parameters]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_4"><field enabled="true" highlight="false" sid="sid">
<caption>SAP System ID (SAPSID)</caption>
<helpitem id="common.SAPSystemIDCIDB"/>
<value type="upper" maxlength="3" regexp="^[A-Z][A-Z0-9]{2}" minlength="3">JEP</value>
</field></input><input id="ID_5"><field enabled="true" highlight="false" sid="networkName">
<caption>Network Name (SAP Virtual Instance Host)</caption>
<helpitem id="common.VirtualInstanceHostWindowsMSCS"/>
<value type="string" maxlength="13" minlength="1">SAPJEP</value>
</field></input><input id="ID_6"><pulldown edit="false" enabled="true" highlight="false" sid="network">
<caption>Use Public Network</caption>
<helpitem id="mscs.UsePublicNetwork"/>
<value>Cluster Network 1</value>
<selectvalue>Cluster Network 1</selectvalue>
</pulldown></input><input id="ID_7"><pulldown edit="false" enabled="true" highlight="false" sid="sharedDrive">
<caption>Destination Drive for Clustered Instances</caption>
<helpitem id="mscs.SelectSharedDrive"/>
<value>BACKUP</value>
<value>SAP_USR_SID_CI_NODE</value>
<value>SAPDATA1</value>
<value>SAPDATA2</value>
<value>SAPDATA3</value>
<value>SAPDATA4</value>
<value>SAPLOG1</value>
<value>SAPLOG2</value>
<value>SAPTEMP_SAPDIAG_SAPSYBSYSTEM</value>
<value>SYBASE</value>
<selectvalue>SAP_USR_SID_CI_NODE</selectvalue>
</pulldown></input></inputgroup><inputgroup id="ID_8"> <caption><![CDATA[DNS Domain Name]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_9"><check enabled="true" highlight="false" sid="setFQDN">
<caption>Set FQDN for SAP system</caption>
<helpitem id="common.FullyQualifiedDomainNameSelect"/>
<boolvalue>
<true/>
</boolvalue>
</check></input><input id="ID_10"><field enabled="true" highlight="false" sid="FQDN" depends="setFQDN">
<caption>DNS Domain Name for SAP System</caption>
<helpitem id="common.FullyQualifiedDomainName"/>
<value type="string" regexp="^[^.]+.*$" minlength="1">jnport.com</value>
</field></input></inputgroup><inputgroup id="ID_11"> <caption><![CDATA[Windows Domain]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_12"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_13"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_14"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input><input id="ID_15"><password confirm="true" enabled="true" highlight="false" sid="sapServiceSIDPassword">
<caption>Password of SAP System Service User</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_16"> <caption><![CDATA[Windows Domain for SAP Host Agent]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_17"><radiobox enabled="true" highlight="false" sid="domainType">
<caption>Domain Model</caption>
<helpitem id="common.DomainModelDomainLocal"/>
<radio enabled="true" sid="local">
<caption>Local Domain</caption>
<boolvalue>
<true/>
</boolvalue>
</radio>
<radio enabled="true" sid="global">
<caption>Domain of Current User</caption>
</radio>
<radio enabled="true" sid="other">
<caption>Different Domain</caption>
</radio>
</radiobox></input></inputgroup><inputgroup id="ID_18"> <caption><![CDATA[Operating System Users]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_19"><password confirm="true" enabled="true" highlight="false" sid="sidAdmPassword">
<caption>Password of SAP System Administrator</caption>
<helpitem id="common.PasswordCreateExistsOS"/>
<encrvalue maxlength="63">*****</encrvalue>
</password></input></inputgroup><inputgroup id="ID_20"> <caption><![CDATA[SCS Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_21"><field enabled="true" highlight="false" sid="instanceNumber">
<caption>SCS Instance Number</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="string" maxlength="2" regexp="[0-9]{2}" minlength="2">00</value>
</field></input></inputgroup><inputgroup id="ID_22"> <caption><![CDATA[Java Message Server Port]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_23"><field enabled="true" highlight="false" sid="scsMSPortInternal">
<caption>Internal Java Message Server Port</caption>
<helpitem id="common.InternalMessagePort"/>
<value type="numeric" maxlength="5" min="1025" max="65535">3900</value>
</field></input></inputgroup><inputgroup id="ID_24"> <caption><![CDATA[Enqueue Replication Server Instance]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_25"><field enabled="true" highlight="false" sid="ersInstanceNumber">
<caption>Number of the ERS Instance</caption>
<helpitem id="common.InstanceNumberCreate"/>
<value type="numeric" maxlength="2" max="99" minlength="2">10</value>
</field></input><input id="ID_26"><field enabled="true" highlight="false" sid="ersVirtualHostname">
<caption>ERS Instance - Virtual Host Name</caption>
<helpitem id="common.virtualHostname"/>
<value type="string" maxlength="60" minlength="1">SAPJEP</value>
</field></input></inputgroup><inputgroup id="ID_27"> <caption><![CDATA[Unpack Archives]]></caption><selector enabled="true"><bool><boolvalue><false/></boolvalue></bool></selector><input id="ID_28"><table enabled="true" fixedrows="true" sid="askUnpack">
<caption>Archives to Be Unpacked</caption>
<column enabled="true" type="check" numeric="false" upper="false" name="unpack">
<caption>Unpack</caption>
<helpitem id="common.Unpack"/>
<value type="string">false</value>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="path">
<caption>Archive</caption>
<helpitem id="common.UnpackArchive"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="codepage">
<caption>Codepage</caption>
<helpitem id="common.UnpackArchiveCodepage"/>
</column>
<column enabled="false" type="field" numeric="false" upper="false" name="destination">
<caption>Destination</caption>
<helpitem id="common.UnpackArchiveDestination"/>
</column>
<column enabled="true" type="file" numeric="false" upper="false" name="ownPath">
<caption>Downloaded To</caption>
<helpitem id="common.UnpackArchiveDownload"/>
<value type="string"/>
</column>
<row rowId="0">
<boolvalue>
<true/>
</boolvalue>
<value>DBINDEP\SAPEXE.SAR</value>
<value>Unicode</value>
<value>E:\usr\sap\JEP\SYS\exe\uc\NTAMD64</value>
<value/>
</row>
</table></input></inputgroup></review><button sid="btPREV" default="false" enabled="false" ><caption>< &Back</caption><action>ACTION_PREV</action><tooltiphelp><![CDATA[]]></tooltiphelp></button><button sid="btNEXT" default="true"><caption>&Next</caption><action>ACTION_NEXT</action><tooltiphelp><![CDATA[Continue processing]]></tooltiphelp></button><button sid="btEDIT"><caption>&Revise</caption><action>ACTION_EDIT</action><tooltiphelp><![CDATA[Edit input values]]></tooltiphelp></button><button sid="btDETAIL" default="true"><caption>Show &Detail</caption><action>ACTION_CBD_DETAIL</action><tooltiphelp><![CDATA[Show all input values]]></tooltiphelp></button></dialog></sapinstgui>
TRACE      2015-03-18 11:30:32.161 [iaxxgenimp.cpp:1031]
          CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
TRACE      2015-03-18 11:30:33.330 [sixxbsummary.cpp:83]
          CSiSummaryContainer::setDocument(const iXMLDocument & doc)
<?xml version="1.0" encoding="utf-8"?>
<sapinstguiresp>
<action>ACTION_NEXT</action>
<dialog sid="diReviewDialog">
<review id="review_controll"/>
</dialog>
</sapinstguiresp>
TRACE      2015-03-18 11:30:33.331 [iaxxdlghnd.cpp:96]
          CDialogHandler::doHandleDoc()
CDialogHandler: ACTION_NEXT requested
TRACE      2015-03-18 11:30:33.331 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.356 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.375 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.429 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:33.500 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.773
Status of Step |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 is not OK. So we have to restart at this point.
TRACE      2015-03-18 11:30:33.773
Switch to STANDARD mode
TRACE      2015-03-18 11:30:33.773 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.801 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:33.866 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:33.868 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:33.926 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:34.67 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:34.67 [csistepexecute.cpp:1024]
Execute step ntpatch2 of component |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0
TRACE      2015-03-18 11:30:34.084
Call block: NW_Update_DLLs_ind_ind_ind_ind
    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2_Preprocess
is validator: false
TRACE      2015-03-18 11:30:34.115 [csistepexecute.cpp:1079]
Execution of preprocess block of |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0|ntpatch2 returns TRUE
TRACE      2015-03-18 11:30:34.127
Call block: NW_Update_DLLs_ind_ind_ind_ind
    function: NW_Update_DLLs_ind_ind_ind_ind_SubComponentContainer_ntpatch2
is validator: false
TRACE      2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs(false)
TRACE      2015-03-18 11:30:34.127
NW_Update_DLLs.installDLLs() already run
TRACE      2015-03-18 11:30:34.153
The step ntpatch2 with key |NW_FirstClusterNode_Java|ind|ind|ind|ind|0|0|NW_FirstClusterNode|ind|ind|ind|ind|NW_FirstClusterNode|0|NW_First_Steps|ind|ind|ind|ind|firstSteps|0|NW_Update_DLLs|ind|ind|ind|ind|dll|0 has been executed successfully.
INFO      2015-03-18 11:30:34.154 [synxccuren.cpp:887]
          CSyCurrentProcessEnvironmentImpl::setWorkingDirectory(const CSyPath & C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1)
          lib=syslib module=syslib
Working directory changed to C:/Program Files/sapinst_instdir/NW740SR2/SYB/INSTALL/HA/JAVA/MSCS-NODE1.
TRACE      2015-03-18 11:30:34.187 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:34.200 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\keydb.xml
TRACE      2015-03-18 11:30:34.255 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
TRACE      2015-03-18 11:30:34.256 [kdxxctaco.cpp:93]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile start ...
TRACE      2015-03-18 11:30:34.283 [kdxxctaco.cpp:121]
          CKdbTableContainerImpl::syncToContainerFile
after creating out stream for C:\Program Files\sapinst_instdir\NW740SR2\SYB\INSTALL\HA\JAVA\MSCS-NODE1\statistic.xml
TRACE      2015-03-18 11:30:34.425 [kdxxctaco.cpp:155]
          CKdbTableContainerImpl::syncToContainerFile
CKdbTableContainerImpl::syncToContainerFile stop ...
INFO      2015-03-18 11:30:34.426 [csistepexecute.cpp:1024]
Execute s

Hello Arjun,
Have you executed any other installation prior this attempt?
It seems there are unfinished installations on this server. If this is the case, run the SWPM to uninstall the unfinished installation. Then, execute the installation once again.
Also, make sure all IPs are corrects in the DND and host files. There were cases in which the IPs were not properly configured, or maybe a typo.
Regards,
Henrique Girardi
SAP Active Global Support
#2081285 - How to enter good search terms to an SAP search?
https://service.sap.com/sap/support/notes/2081285
SWPM Troubleshooting documents:
http://scn.sap.com/docs/DOC-62646

OIM 11g High Availability Deployment

Hi Experts,
I'm deploying OIM 11g in High Available schema, following Oracle docs: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF, I have succesfully installed and configured OIM & SOA in weblogic domain on 'OIMHOST1', trying to propagate the configuration from 'OIMHOST1' to 'OIMHOST2' I have packed (using pack.sh) the domain on 'OIMHOST1' and unpacked (using unpack.sh) it to 'OIMHOST2' so I have updated the NodeManager executing setNMProps.sh and finally Ihave started the NodeManager. In order to Test everything is fine and following the documentation I'm traying to perform the following steps, but I'm not succeed
I'M MUST TO SAY THAT I'M RUNNING ON SINGLE STANDARD EDITION DB INSTANCE AND NOT RAC AS MENTIONED IN ORACLE DOCS, PLEASE CLARIFY IF RAC IS REQUIRED, FOR NOW I'M IN DEVELOPMENT ENVIRONMENT, SO I THINK RAC IS NOT REQUIRED FOR NOW, PLEASE CLARIFY
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1&
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console.
Here its not possible start AdminServer on OIMHOST2, first of all, it looks like boot.properties file under WLS_OIM_DOMAIN_HOME/servers/AdminSever/security is not valid, the first time I try to execute startWeblogic.sh script, it ask for username/password, I have updated boot.properties (vi boot.properties) and manually set clear username and password, this time startWeblogic.sh script passed this stage, but fails:
<Error> <util.install.help.BuildMasterHelpSet> <BEA-000000> <IOException ioe java.io.IOException: No such file or directory>
<Error> <oracle.adf.share.config.ADFMDSConfig> <BEA-000000> <MDSConfigurationException encountered in parseADFConfigurationMDS-01330: unable to load MDS configuration document
MDS-01329: unable to load element "persistence-config"
MDS-01370: MetadataStore configuration for metadata-store-usage "writeable" is invalid.
MDS-00503: The metadata path "/u01/app/oracle/product/Middleware/user_projects/domains/IDMDomain/sysman/mds" does not contain any valid directories.
I have verified that this directory "mds" does not exists, as reported by the IOException, in OIMHOST2, but it exists in OIMHOST1. from here its not possible for me following Oracle's documentation, I test this starting Adminserver in OIMHOST1, and starting WLS_SOA2 and WLS_OIM2 managed servers from OIMHOST1 AdminServer console, I have tested 2 ways:
1.- All managed servers in OIHOST1 are shutdown, for this, managed servers in OIMHOST2 works as expected
2.- All managed servers in OIMHOST1 are RUNNING, for this, first I have started SOA2 managed server, after that, I have fired OIM2 managed server, when it finish boot process the following message appears in server's output:
<Warning> <org.quartz.impl.jdbcjobstore.JobStoreCMT> <BEA-000000> <This scheduler instance (servername.domainname1304128390936) is still active but was recovered by another instance in the cluster. This may cause inconsistent behavior.>
Start the WLS_SOA2 managed server using the WebLogic Administration Console.
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started.
8.9.3.9 Validate the Oracle Identity Manager Instance on OIMHOST2
Validate the Oracle Identity Manager Server instance on OIMHOST2 by bringing up the Oracle Identity Manager Console using a web browser.
The URL for the Oracle Identity Manager Console is:
http://oimvhn2.mycompany.com:14000/oim
Log in using the xelsysadm password.
Your help is highly apprecciated
Regards
Juan

Hi Vaasu,
I have succeeded deploying OIM in HA, just now my customer and I are working on the installation of webtier. Now I have a better understand about HA concepts and the way weblogic works -really nice, but little tricky-
All the magic about HA is configuring properly the network interfaces in each Linux boxes (our case) so, first of all you need to create 2 new floating IP's on each Linux boxes (google: how to create virtual Ip in linux, if you don't know) clone and modify your 'eth0' network script to create the virtual IPs
Follow the procudere in the HA guide: http://download.oracle.com/docs/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF
create DB schemas with RCU
install weblogic
install SOA
patch SOA
install IAM
---if you are working on a virtual machine is good idea to take a snapshot here---
Create and configure the weblogic domain (special attentention whe configuring the cluster), see step 13 of 8.9.3.2 Creating and Configuring the WebLogic Domain for OIM and SOA on OIMHOST1, here you need to cofigure:
For the oim_server1 entry, change the entry to the following values:
Name: WLS_OIM1
Listen Address: the IP that is confured in eth0:1 of Linux box1
Listen Port: 14000
For the soa_server1 entry, change the entry to the following values:
Name: WLS_SOA1
Listen Address: the IP configure on eth0:2 of Linux box1
Listen Port: 8001
For the second OIM Server, click Add and supply the following information:
Name: WLS_OIM2
Listen Address: the IP configured on eth0:1 of Linux box2
Listen Port: 14000
For the second SOA Server, click Add and supply the following information:
Name: WLS_SOA2
Listen Address: the IP configured on eth0:2 of Linux box2
Listen Port: 8001
Click Next.
On Step 16 ensure you are using the UNIX tab to configure the machines, also ensure that for machine1 you use the IP configured on the eth0 interface of Linux box1, the same for machine2
please confirm you have performered 8.9.3.3.2 Update Node Manager on OIMHOST1
if everything is ok you must be able to start the AdminServer as described in the guide.
configure OIM: 8.9.3.4.2 Running the Oracle Identity Management Configuration Wizard, in my case I don't need LDAPsync, I have skipped this section, if you configure properly OIM, then you mus perform 8.9.3.5 Post-Configuration Steps for the Managed Servers
resrtar AdminServer then from the weblogic console, start OIM and SOA if node manager is properly configured SOA and OIM must run properly, update deployment mode and coherence as described in the guide and verify that OIM run perfectly in Linux box1.
Propagate OIM from Linux box1 to Linux box2 as described in the guide, using pack and unpack (you MUST use the same filesystem directory structure on both Linux boxes)
Update and start NodeManager as described in the guide
VERY IMPORTAN OBSERVATION
the guide say:
8.9.3.8.3 Start the WLS_SOA2 and WLS_OIM2 Managed Servers on OIMHOST2
Follow these steps to start the WLS_SOA2 and WLS_OIM2 managed servers on OIMHOST2:
Stop the WebLogic Administration Server on OIMHOST2. Use the WebLogic Administration Console to stop the Administration Server.
JUAN OBSERVATION:
IS NOT POSSIBLE TO START OR STOP ADMINSERVER ON HOST2 SINCE ADMIN SERVER WERE CONFIGURED TO LISTEN ON THE IP ADDRES OF eth0 INTERFACE ON HOST1, SO, ITS NOT POSSIBLE TO PLAY IT ON HOST2, I THINK AND ADDITIONAL PROCEDURE SHOULD BE FOLLOWED TO CONFIGURE ADMINSERVER IN HA IN A ACTIVE-PASSIVE MODE
Start the WebLogic Administration Server on OIMHOST2 using the startWebLogic.sh script under the $DOMAIN_HOME/bin directory. For example:
/u01/app/oracle/admin/OIM/bin/startWebLogic.sh > /tmp/admin.out 2>1& -----NOT APPLICABLE
Validate that the WebLogic Administration Server started up successfully by bringing up the WebLogic Administration Console. -----NOT APPLICABLE
Start the WLS_SOA2 managed server using the WebLogic Administration Console. ----START SOA2 FROM THE CONSOLE RUNNING ON HOST1, IT DOESN'T MATTER
Start the WLS_OIM2 managed server using the WebLogic Administration Console. The WLS_OIM2 managed server must be started after the WLS_SOA2 managed server is started. ------ START OIM2 FROM THE CONSOLE RUNNING ON HOST1
HERE YOU MUST BE ABLE TO LOGIN TO OIM2 SERVER AS DESCRIBED IN THE GUIDE, YOU DON'T NEED TO EXECUTE config.sh SCRIPT THIS SHOULD WORK AS DESCRIBED.
Server migration should work straight-forward if you have configured the floating IPs as described, I have not configured the persistence yet since my customer does not have the skills to share a storage.
I hope this helps, and feel free to comment or complement.
By the way, did you know how to set up a valid SSL certificate in Windows 2003 server??? I need it to test and Exchange 2007 I'm tryin to integrate
Regards
Juan

Need to add a second weblogic server for high availability

I have a weblogic 10.3.3 server with forms and reports 11.1.1.3.
I have an adminServer, WLS_FORMS and WLS_REPORTS managed servers setup.
This was setup with the wizard, so the WLS_FORMS is in the cluster_forms cluster group and WLS_REPORTS in the cluster_reports group.
I now need to add a second server with forms and reports also to act as one big server and provide high availability and load balancing.
How do I achieve thsi, is there a wizard that will do this?
The two servers are setup in exactly the same way, with the same versions of Weblogic and Forms and Reports.
Thanks in advance.

I do not know "reports 11.1.1.3" application, but from your description this application is already targeted on a clustered configuration.
So it should be sufficient to add 2 new instances in the WebLogic domain "WLS_FORMS_2", "WLS_REPORTS_2", include them into the existing clusters and add a load balancer (like apache + wleblogic-plugin) that will balance requests on instances.
I never heard of wizards to create such clustered environments. However it is not hard to do:
1- Install binaries on the new machine
2- Create the domain configuration directory on the new machine using config.sh wizard in the same way you have aleady done with the first machine.
In this step you can create a clone of the existing domain, but it is enough to create a domain with the same name and the same admin instance.
Instead of using config.sh, you can also copy the domain directory from the existing machine and change diretories in scripts if needed.
The domain configuration is needed only to find the binaries, the basic domain files common to all installations, and to allow startup scripts (see point 4-) to connect to the admin and download the domain/instance configuration.
3- Configure the new instances on the existing WebLogic console
4- Create startup scripts for "WLS_FORMS_2", "WLS_REPORTS_2" on the second machine
Bye
Mariano

Running SAP XI in High Availability

Bonjour a vous tous !
I am looking for best practices when running SAP Exchange Infrastructure (3.0, well it is now XI 7.0 with the new NW2004s SP9) in High Availability mode.
The customer that I work with does not know yet on which platform its production environment will be (Unix/Oracle vs Microsoft/SqlServer 20005). I know that some hardware vendor has built-in HA capabilities, either Software/Hardware based (MSFT MCS, IBM HACMP, etc).
Should we go for an "SAP XI all-In One" installation or distributed one ? Should we get one central SLD or one per environment? What is the role of the SLD and Solution Manager? Do they need to be interconnected?
I have worked with other EAI middlewares (Biztralk Server and webMethods) and normally the Integration Engine sit on it's own server and the various adapters are on their respective servers (i.e.: one server for HTTP, one server for FTP, one server for EJB, etc), since the sizing (RAM. Java heap memory, etc) for all theses adapters are different (FTP a lot of small file, EJB not so many request, but they could eat-up a lot of CPU, etc). Is this a best practice that I can apply also with SAP XI ?
Thank in advance for you help !
A+

Hi Michel,
Well we seem to work along the same track...
I am working on 2 customers concurrently - the one using like you using PI 7.0. In their case we implemented a Windows solution using W2K3 Enterprise Edition 64-bit. Avoid 32-bit as it will no longer be supported by SAP next year. We are using MSCS (which is part of the Enterprise Edition by default).
The 2nd is a solaris customer (very large) for which we are using a cross-data center solution handled by Veritas Cluster Manager with automatic failover between systems and data centers if required.
Some answers to your questions:
1. All-in-one - yes
2. SLD - one for DEV/QA, and separate for Prod - this is recomended by SAP too - I can mail you a guide if needed
3. With Solution Manager 4.0, it now supports the J2EE side and hence can understand SLDs. The concept is to setup an HA Solution Manager and deploy the SLD for Prod on the same piece of kit.
4. SAP do not recomend splitting off the Adapter Engine except for specific cases, the main reason being if you have specific systems behind firewalls that you need to communicate with.
Under no circumstances should you have separate AE's per adapter - this would be an extermely expensive solution hardware and support-wise.
Regards
Brian

ANM in High Availability installation

Similar Messages

Maybe you are looking for