ANN: Silicon Prairie plug-ins Updated for FrameMaker 10

All of the FrameMaker plug-ins from Silicon Prairie have been updated for FrameMaker 10. The updates are free for registered users.
You can download the plug-ins here:
http://www.siliconprairiesoftware.com
Regards,
Steve

****!!!!!!!!!!!! I've spent 120 hours in **** because it's 10.4.10?
OK, I buy it.
I just tried to install 104.9 after downloading from Apple site (hard to find).
My G5 main drive wasn't approved for installation.
Do I have to reninstall 10.4.6 (from disc that I got last week), and then download each install up to 9? (7...8...) I ask because on apple download page it said I needed OS 0.4.8 to intall .9, when I have .10.
This is funky, but maybe I see light at the end of the tunnel?

Similar Messages

" plug-in name does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari Security "Manage Website Settings"?

Hi,
Wondering why "<plug-in name> does not support the highest level of security for Safari plug-ins" appear for some plugins in Safari > Security > "Manage Website Settings"?
Have been trying to get to the root cause of the problem but did not find much on this. I am trying to figure out what can get the warning to go away completely than using the Allow/Always Allow options for the plug-in
Thanks,
Shyam

Hi Linc,
Thank you for your response. Here is the screenshot of the warning that I am talking about.
Here is what I do:
1. Launch Safari and open its Preferences. I have Safari 7.1 installed on my machine.
2. Click Security Tab and click Manage WebSite Settings
3. A window opens showing me all the Plug-ins that I have (listed on the left hand side).
4. One of them is the Adobe Reader plug-in. When I click Adobe Reader, the following details about the plug-in show up on the right
I was referring to the highlighted section that warns me about this plug-in not using the highest level of security for Safari Plug-ins.
Note: I do not see this for all my plug-ins (QuickTime, Adobe Flash Player don't give me this warning) which tells me that there is a way to make the warning go away.
Thanks again,
Shyam

Cannot find "Plug-ins" folder for Photoshop CS6 on my Mac.

I cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. Path suppose to be Macintosh HD > Applications  > Adobe Photoshop CS6 > Plug-Ins but that folder is missing. Any suggestion on how to find it?

Thank you Hans,
If I understand it correctly, way to install extensions/plugins on Mac is
following
"Quit Photoshop, then copy the desired plug-ins (or extensions) to the
following locations:
Mac OS:
 - Applications/Adobe Photoshop CC/Plug-ins folder
 - Applications/Adobe Photoshop CS6/Plug-ins folder"
In my case it would be the last path, as I have CS6.
However, my problem is that Plug-ins folder is missing
Regards
Goran
2014-06-01 21:42 GMT+02:00 hans-g. <[email protected]>:
 Cannot find ”Plug-ins" folder for Photoshop CS6 on my Mac. created
by hans-g. <https://forums.adobe.com/people/hans-g.> in *Photoshop
General Discussion* - View the full discussion
<https://forums.adobe.com/message/6425830#6425830>

Plug-ins Needed for SMP Target Users

No Strobe Media Playback plug-ins are available to the SMP target audience.
The Introducing Strobe Media Playback presentation says:
Our target audience for Strobe Media Playback and Flash Media Playback are designers, content owners, enterprises, and developers who want to get started easily with an out-of-the-box, feature rich media player. Strobe Media Playback allows you to spend more time on creating content than focusing on how to build, or what media player to use.
So the SMP target audience is not Flash developers.
That same presentation says the target audience includes "bloggers, small business" ...
The majority of bloggers and people who build small business websites are not progammers of any sort, let alone Flash developers.
Currently the only way to obtain or test any SMP plugins is to build them from the source.
And the plug-in examples included in the SMP download package demo pages do not include the actual plug-in file making it impossible to actually complete the working demo.
So basically no plugins are currently available to the SMP target audience.
Please make working plug-ins available for download.
Along with some examples and/or documentation of how to use them.
The analytics and advertising plug-ins would be a good start.
Thanks.
Ken McD

This is a continuation from another thread on the same subject:
http://forums.adobe.com/message/3240034#3240034
From Greg H
Re: Does .f4m manifest work with Akamai HD network and strobe player
Hi Ken,
You wrote:
"The big gaping hole is demonstrating working plug-ins and documentation for those plug-ins."
For SMP, might including analytics plug-ins be a good start?
If you are looking for "demonstrating working plug-ins" the following two analytics plug-ins are accessible:
* GTrack Plug-in
http://www.realeyes.com/blog/2010/09/27/announcing-google-analytics-pl ug-in-for-osmf-the-gtrack-plug-in-2/
* TubeMogul InPlay Analytics
http://tubemogul.com/public/showPage/osmf_plugin
There also are plug-in samples in the OSMF project that perhaps could be suited to your effort.
fwiw, Although OSMF is **OPEN**, many current plug-in partners are not.
I have pursued an effort similar to what you currently are doing.
It is awesome that the partners are supporting OSMF, however as I contacted them responses such as "That document is for customers only" was very common.
btw, My reply is forking this thread.
If you respond to this response (regarding plug-ins in general), please open a new thread cross referencing this one.
I will see your reply either way.
btw #2, I would be interested in the link to the "demo website" you mentioned (if it is public).
hth,
g
(my god it is hard to simply quote another post in this "forum")
Thanks for the input Greg.
I had already saved the TubeMogul example as it has some good documentation.
The GTrack analytics plugin looks great.
And very good documentation.
But again, the file is not available.
Users must build it from the source.
This eliminates the majority of the potential users.
Regarding the demo website:
The demo website is not yet online.
I have added demos for the usual stuff - FLV, F4V, MP4, MOV.
And the latest streaming stuff - F4M, DVR, etc.
And M3U playlists.
Added the 3 Flash Access DRM examples found here in this forum.
Like to add SMIL demos when the plugin becomes available.
I have made demos for whatever is available from Adobe and Akamai (that I can find).
Which at this point includes no plug-ins whatsoever.
Will let you know when it is online.
Regards,
Ken McD

Cannot find the plug-ins folder for photoshop elements 6

Hi,
I was trying to update the plug-in for camera raw for PE6, downloaded the update however in the instructions it tells me to go to the root folder in Library/Application Support/Adobe/Plug-Ins/CS3/File Formats and replace the camera raw plug in.
there is no plug-ins folder in the library/application support/adobe folder. Is there somewhere else I should be looking ?
I am running a Mac with yosemite.
thanks in advance,

You are probably in the wrong library. You have three libraries on your mac: your username>library, system>library (never mess with that one), and the library at the top level of your hard drive, which is the one you want. It's not exactly hidden, but it's very hard to get to. The easiest way is to go to the Finder preferences>sidebar>show these items in the sidebar, and turn on Hard disks. Then when you open a new finder window, you will see your hard drive in the list on the left side of the window. Click it and the library will be at the top level of results on the right side of the window.

10.4, How to stop plug-ins update reminder, Windows fix does not work on Mac.

Need to get rid of bar across top saying plug-ins are not up-to-date. The "fix" posted for Windows does not work on my Mac. When I try for updates, none seem to install. How do I really find out if the ones I have are the latest available for my system? Everything seems to work OK as is. Could it be that my Mac is PPC and that there are plug-in updates that would work in 10.4 on Intel but not on PPC, and that FireFox cannot differentiate?

Setting the Boolean pref plugins.hide_infobar_for_outdated_plugin to true on the about:config page should hide that info bar.
*http://kb.mozillazine.org/about:config
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access the about:config page. 
*Use the Filter bar at the top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default via the right-click context menu if they are user set
*Preferences can be changed via the right-click context menu: Modify (String or Integer) or Toggle (Boolean) or by double-clicking the line with the pref
*Preferences can be created via the right-click context menu: New -> String, Integer, Boolean
Firefox 4 and later require at least OS X 10.5 and a Mac with an Intel processor.
*http://www.mozilla.org/firefox/12.0/system-requirements/
For an unofficial Firefox ESR 10.0.4 compatible version (TenFourFox) that runs on PowerPC Macs with OS X 10.4.11 or OS X 10.5.8 you can look at:
*http://www.floodgap.com/software/tenfourfox/
*http://www.macupdate.com/app/mac/37761/tenfourfox
Plugins are no longer supported.
*http://code.google.com/p/tenfourfox/wiki/ReleaseNotes1004
*http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
*http://code.google.com/p/tenfourfox/wiki/AAATheFAQ

I need to plug ins extract for photoshop cs5

I am happy to use photoshop cs 5 but my cs 5 do not have plug ins extrac to crop my on ap lioa and crop my images on ap standa in my website. So I have seached innternet to install . Now you can help me to find that plug ins to use for my work. Thank you verry much

You would need ACR 7.x which is available in CS6. Or as ertho said you can get the free DNG 7.3 converter and convert raw to a DNG.

"AuSpeechSynthesis" audio unit plug-in update for GarageBand for Snow Leopard?

I cannot open GarageBand and use it without this plug-in updated or an alternative solution. I get this error message:
"An error has occurred with an installed audio limit plug-in. GarageBand unexpectedly quit while trying to use the audio unit "AuSpeechSunthesis" by "Apple". This
plug-in may require an update."
I've looked everywhere for an update. My computer won't accept the latest version of GarageBand.

Which version of GarageBand are you currently using? And is your profile signature still valid? MacoS X 10.6.8 ?
Did you install any new software or update software, before this problem first occurred? Did GarageBand ever work for you?
The AuSpeechSynthesis plug-in is a standard plug-in, that is installed as part of the system in /System/Library/Components/AUSpeechSynthesis.component/.
If it should have become corrupted, you will need to reinstall the system.

Recommended plug-ins/apps for panorama stitching in Aperture?

Does anyone have any recommendations for photo stitching plug-ins/apps that "play well" with Aperture?
I end up taking a large number of panorama series (horizontal, vertical, and occasionally 2D grid), and I would love to be able to select a stack in Aperture and "edit with plug-in" to create a stitched image (like Photomatix does with HDR series). Failing that, any recommendations of a reliable external app and a recommended Aperture workflow?
(I had been using ArcSoft Panorama Maker, but it has proven highly unreliable -- lots of crashes and inability to process a number of seemingly-straightforward series --, and its somewhat nonstandard UI becomes pretty cumbersome if you have to use it a lot.)
Thanks!

Mike,
I will share my workflow, but I cannot really recommend it as "best" since I have not tried other software or workflows, but it works well for me.
I do not use any plugin (and I'm not aware of one right now). I use Hugin, freeware from SourceForge http://sourceforge.net/projects/hugin/.
After importing RAW photos into Aperture (I use a managed library for the most part, but that's neither here nor there), I stack each set of photos that belong in the same panorama. I export the photos from each stack as TIFFs to a predefined folder that contains my pano input and outputs. I run the photos through Hugin and output as JPG files. Then I import those pano outputs as referenced photos into Aperture. For each pano output, I add it to the corresponding stack and make it the stack pick. I crop and do color adjustment if necessary on that final version. Finally, I go back to my predefined folder and delete the TIFFs that I exported from Aperture.
A couple notes:
I use JPG as output since there are so many pixels in most panoramas that I could probably print it out large enough to cover my living room wall before seeing JPG artifacts.
I delete the TIFFs from my pano folder because they're just wasting space at that point. I can recreate them from my Aperture versions at any point, and I'm probably not going to use them outside Aperture.
It's really easy to add the pano to the stack of its "source" photos, since Hugin ensures the EXIF date matches the first photo in your pano. By sorting my date in Aperture, a newly imported pano shows up adjacent to the "source" stack.
I import the final JPG as referenced because I want to keep track of all the parameters saved in my Hugin project (I.e., what are the source photos; what were the control points; roll/pitch/yaw; pano algorithm, etc.). That project file is not a picture, so Aperture won't manage it. However, I store the final JPG in the same place as its corresponding project file. With a referenced master, I can use Aperture to show me the location in finder, an voila, I have found the Project file, too. If ever I need to recreate the pano for some reason, I can look at the project file and see what pictures I need to export from Aperture to start the process over again.
Hope this is helpful!
nathan

How do I find the plug-ins folder for Adobe Reader?

I download a subscription pdf from ANSI on an older G4 in January. I recently upgraded to a MacBook Pro i7. ANSI sent me a link to File Open but I need to check the Plug ins to make sure that they loaded. Using get info does not reveal a pull down menu for plug ins.

You can control - click on the Adobe Reader.app and show package content, as well.

How to detect plug-ins path for Photoshop CC?

Hi
I downloaded new CC SDK but unfortunatelly in html doc there is not info how to detect a plug-in path for new Photoshop CC. Pdf doc also contains very old info (still for Photoshop 5.0)
- Could you advice how my installers can detect new Photoshop CC and detect a target place for plug-in installation? Forboth win and Mac cases.
- Is CC a pure 64bit windows app or it also can be presented into both C:\Program files and C:\Program files(x86) folders?
Thanks
Maxim

Thank, Bartek, for your responce
I checked this approach for CS4. In my winRegistry there is not {06870682-6f3c-4b97-9143-f03e85c0 bd3e} key. Should it work only for CC?
Previously, I checked "HKLM\Software\Adobe\Photohsop" and found all presented PSD versions, like #12 for CS5, #55 for CS5.5 #60 for CS6. And Wow6432Node accordingly
Will this approach work if I will search for CC the key like "HKLM\Software\Adobe\Photohsop\80\PluginPath" ? (if I had PSD CC I could check it but I dont wan to install it yet for dont break my currect working environment)
Also, could you advise what it default installation path for Mac? Some like "/Applications/Adobe/Adobe Photoshop CC" ? Will CC have same plug-ins subfolder like previously versions?
Best regards
Maxim
PS. Ilya, it means what I should check bot 32 and 64 bit windows versions and for CC also? 32bit windows version of CC is still available? wot is <version> key for CC? 80? CC? Do you know what is default installation path for CC on Mac?

Chrome Plug-in update for Flash does not work

I am a Mac OS X 10.5.8 user and I use Chrome as my standard browser. I updated the Flash Player to version 10.3.183.23 2 times now and it is still not working and showing me that I have an old version. Every time I try to update the Plug-in it installs it and then everything stays the same when I restart Chrome. Could you help me out here?

Hi folks,
I hope you guys know that Mac OS 10.5.x have been officially dropped to support by Apple(as OS vendor) and Google(as browser vendor) while ago. So this behavior sound intentional by Chrome as same behavior as recent Safari. I tried searching around and found this post at Google site:
http://support.google.com/chrome/bin/answer.py?hl=en&answer=2599452
http://productforums.google.com/forum/#!topic/chrome/Y_s0YY2wQkQ
During above forum discussion there is one user who found own solution with his/her own risk:
https://productforums.google.com/forum/?fromgroups=#!category-topic/chrome/mac/_CnkF0tj6xk %5B1-25%5D
It's up to you if you want to try it out but please understand that the environment is at risk of security matters since all OS, browser, and plugin software do NOT provide security update for you.
thanks,
Hitomi

Where is the plug-ins folder for the contact sheet plug in! Mac

I'm trying to download contact sheet! I don't know exactly how to get to the plug ins folder.

Your HD > Applications > Adobe Photoshop CSX > Plug-ins

Are plug-ins developed for Indesign CS4 compatible with CS5?

Will a plug-in developed for Indesgn CS4 work in CS5?

No. CS4 plugin need to be ported to CS5 - basing on InDesign CS5 SDK
Regards
Bartek

Camera-raw plug-in update for CS5.5

I've just bought a Fuji XE-1 camera and I've read that one needs the 7.4 version of the camera raw plug-in to handle its (RAF) files.
However, when I try to update to this version I get the message that this is not ment for my CS5.5
Why is this and what should I do to be able to work with the RAF-files?
I use the 64-bit version and converting the files to DNG seems to be not the solution.

The Fuji XE-1 was first supported in Camera Raw 7.2.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw 7 and above is only compatible with Photoshop CS6 and above. It will not work with CS5.5.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Your options:
Upgrade to Photoshop CS6 to get Camera Raw 7+
Join the Creative Cloud
Download the free DNG converter and convert all Raw files from the XE-1 to DNG then edit the DNGs in CS5.5
http://www.adobe.com/products/photoshop/extend.displayTab2.html

ANN: Silicon Prairie plug-ins Updated for FrameMaker 10

Similar Messages

Maybe you are looking for