ANN: WS Structure Tools 2.0 is released
Hi,
West Street Consulting is pleased to announce the release of its Structure Tools plugin, version 2.0. This version includes a new modeless attribute editor that significantly speeds up the process of editing attribute values, with a variety of amenities such as multiple element support, alphabetization, and tokenized values. The software is not free; however, a fully-functional shareware version is available for you to try it out. For more information, please visit www.weststreetconsulting.com.
Thanks,
Russ Ward
Owner
Hi Jeff,
do you know why there is no 3.2.0 release on official Eclipse Linux Tools archive page (http://archive.eclipse.org/linuxtools/) or who maintains this?
Thanks a lot,
Sanda
Similar Messages
-
Unable to install Remote Server Administration Tools for Windows 8 Release Preview on RTM 8 Enterprise
Standalone installer available here
http://www.microsoft.com/en-us/download/details.aspx?id=28972
fails with error code 0x80004005
Is this because my installation has issues, or would the admin pack files be updated for RTM?
Thank you in advance for any insightFound the solution here:
http://social.technet.microsoft.com/Forums/en-US/w8itprogeneral/thread/6d8745e0-c4c1-463a-b4bb-09f6c9c22527
Workaround:
Download the RSAT package intended for Windows 8 Release Preview: http://www.microsoft.com/en-us/download/details.aspx?id=28972
Extract the .msu file with a tool such as 7-Zip.
Open an Admin command prompt and change directory to where you extracted the .msu.
Run the following command to install (if x86 you probably have a different .xml filename): pkgmgr /n:Windows6.2-KB2693643-x64.xml
Wait a while. You can look in task manager for pkgmgr. When it disappears, the installation is done.
Use the tools as per usual. -
Hi everyone,
Recently ,I have one publishing site template that has a lot of sub sites which contain a large amount of content.
On root publishing site, I have created custom list including many custom fields
and saved it as template in order that
any sub sites will be able to reuse it later on . My scenario describe as follows.
I need to apply Site Content and Structure Tool to copy a lot of items
from one list to another. Both lists were created from same template
I use Site Content and Structure Tool to copy data from source list
to target list as figure below.
Once copied , all items are completed.
But many columns in target list have been duplicated from source list such as PublishDate ,NumOrder, Detail as
figure below .
What is the huge impact from this duplication?
User can input data into this list successfully
but several values of some columns like “Link column”
won't display on “AllItems.aspx” page
. despite that they show on edit item form page and view item form page.
In addition ,user can input data into this list as above but
any newly added item won't appear on
on “AllItems.aspx” page
at all despite that actually, these
item are existing on database(I try querying by power shell).
Please recommend how to resolve this column duplication problem.Hi,
According to your description, my understanding is that it displayed many repeated columns after you copy items from one list to another list in Site Content and Structure Tool.
I have tested in my environment and it worked fine. I created a listA and created several columns in it. Then I saved it as template and created a listB from this template. Then I copied items from listA to listB in Site Content and Structure Tool and it
worked fine.
Please create a new list and save it as template. Then create a list from this template and test whether this issue occurs.
Please operate in other site collections and test whether this issue occurs.
As a workaround, you could copy items from one list to another list by coding using SharePoint Object Model.
More information about SharePoint Object Model:
http://msdn.microsoft.com/en-us/library/ms473633.ASPX
A demo about copying list items using SharePoint Object Model:
http://www.c-sharpcorner.com/UploadFile/40e97e/sharepoint-copy-list-items-in-a-generic-way/
Best Regards,
Dean Wang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
WebLogic Server Tools 1.1.3 Released
A service release for WebLogic Server Tools is now available. The focus
of this release was to fix several remaining issues affecting current
users and to certify WLS Tools on Eclipse Europa SP2 that was released
at the end of February. We recommend that all current users migrate to
this release by using the Eclipse update manager. More information
about this release can be found in the release notes.
Main Page
https://dev2devclub.bea.com/updates/wls-tools/
Release Notes
https://dev2devclub.bea.com/updates/wls-tools/release-notes/v1.1.3.html
The Eclipse 3.4 "Ganymede" version of WebLogic Server Tools has also
been updated. Version 2.0.2 is now available and has been tested with
Ganymede M5 milestone build. Of course, since Ganymede platform is still
under development we don't recommend this version for most users, but
early adopters with tolerance for pre-release stability can get a sneak
peak of what's coming in the next Eclipse release.
Release Notes
https://dev2devclub.bea.com/updates/wls-tools/release-notes/v2.0.2.html
Konstantin Komissarchik
Team Lead for WebLogic Server ToolsWebLogic Server Tools is built on Eclipse Web Tools Platform which has a
particular project structure that has to be followed. Basically, you
create an EAR project. This contains your app-level descriptors,
APP-INF/lib and any binary modules. Then, for every module in an EAR,
you create a separate project. For web module, use the Dynamic Web
Project. For EJB modules, there is an EJB project. The projects are
wired up using the "J2EE Module Dependencies" project properties page.
Use this page on the EAR project to specify which module projects should
be included in the EAR. Once you've done that, you can use this page in
the module projects to specify inter-module dependencies.
Basically, you have to take your app and convert it into the form that
Eclipse can understand. The easiest way to do that is to create the
projects based on the module structure of your app and then copy content
from your application into those projects. Once you are done, you will
be able to use WebLogic Server Tools to deploy to WLS. The split
directory magic will happen behind the scenes to give you a fast
iterative development experience.
Hope this answers your questions.
- Konstantin -
ANN: XSQL Servlet 0.9.8.6 Release Available
Oracle is excited to announce the 0.9.8.6 technology preview
release of Oracle XSQL Pages and the XSQL Servlet with major
new functionality.
-----------------[ Download Info ]-------------------
http://technet.oracle.com/tech/xml/xsql_servlet/
Click on "Software" to Download
Click on "Release Notes" for Full Documentation
XSQL Pages are server-side XML templates that make it easy
to exploit the powerful combination of SQL, XML and XSLT to
prototype and deploy dynamic, data-powered sites and web
services.
The XSQL Servlet installs into your favorite Java Servlet
environment and works with your favorite relational database,
making it dead easy to:
-> Assemble XML "DataPages" from multiple SQL Query
Results (including full support for Oracle8i's
richly-structured XML Objects Views), local or remote
XML resources, Stored Procedure Calls, etc.
-> Transform the "DataPages" in the server using XSLT,
optionally using stylesheets that are appropriate to
the requesting client, including the ability to
let the client to the stylesheet processing for IE5
or other clients in the future that support this.
Our online support forum for XML is at:
http://technet.oracle.com/support/bboard/discussions.htm
The XSQL Servlet demos (included in the release) are
installed on Oracle's OTN site and can be tested from the
comfort of your browser before you download if you choose:
http://technet.oracle.com/tech/xml/demo/demo1.htm
This new 0.9.8.6 release includes...
More Documentation
==================
More extensive documentation and new tutorial material.
New Demos
=========
New and enhanced demos with additional notes describing key
points each demo is trying to illustrate.
New API's and JavaDoc
=====================
Programmatically process XSQL Pages from your own Java
programs using a new XSQLRequest object, as well as write
custom page "action handlers" with new JavaDoc and
example code.
New Features
============
<xsql:query>
The <query> element from previous releases is now part of
the xsql namespace and is referred to using the new
<xsql:query> syntax in your XSQL Page. A new section details
how to use <xsql:query> to produce XML query results with
nested structure.
<xsql:dml>
Do DML and call stored procedures anywhere you need to in
your XSQL Pages.
<xsql:stylesheet-param>
Use parametrized XSLT Stylesheets and set the stylesheet
parameter values from your XSQL Page.
<xsql:insert-request>
Automatically insert posted XML or HTML Form parameters into
the database.
<xsql:include-xml>
Include arbitrary XML resources at any point in your page by
relative or absolute URL.
<xsql:include-request-params>
Include key information like HTTP Parameters, Session
Variable values and Cookies into your XSQL Page for
addressing them in your stylesheet.
<xsql:include-xsql>
Include the results of one XSQL Page at any point inside
another. This allows sophisticated combinations of multiple
XML data sources and multiple XSLT transformations.
<xsql:include-owa>
Include the results of executing a stored procedure that
makes use of the Oracle Web Agent (OWA) packages inside the
database to generate XML.
<xsql:action>
Invoke a user-defined action handler, implemented in Java,
for executing custom logic and including custom XML
information into your XSQL Page.
nullThat error message is outdated and should read:
Cannot find XSQLConfig.xml in your server-side classpath. The error is definitely that it's not finding XSQLConfig.xml on your classpath. The likely cause is that you did not add the directory:
./xsql/lib
to your CLASSPATH in the JRun Servlet Engine Java environment. -
ANN: Jeffrey Zeldman's Web Standards Advisor released
WebAssist is proud to announce the release of Jeffrey
Zeldman's Web
Standards Advisor, a tool to help web designers reap the
benefits of web
standard compliant sites. Built in collaboration with Jeffrey
Zeldman, the
leading authority on web standards, this Adobe Dreamweaver
extension
includes full HTML and CSS validation as well as checks a
wide range of web
standard issues.
Key features:
* Access W3C HTML and CSS validators from within Dreamweaver
* Validates linked, imported, embedded or inline CSS
* Checks 9 different microformats
* Reviews single page, multiple pages or entire site
* Advises on a range of web standard issues, from classitis
to deprecated
tags.
* Go directly to the code for any reported issue
* Full HTML report, suitable for printing
* Advice on what's nonstandard and how to bring it into
compliance from
Jeffrey Zeldman, author of Designing with Web Standards.
Works with Dreamweaver CS4, Dreamweaver CS3, and Dreamweaver
8 on both Macs
and PCs.
Jeffrey Zeldman's Web Standards Advisor is only $49.99
($34.99 upgrade for
owners of Super Suite and Web Designers Suite).
For more information, visit
http://www.webassist.com/go/webstandards
To check out Jeffrey Zeldman's thoughts on the subject:
http://www.zeldman.com/2009/01/12/jeffrey-zeldmans-web-standards-advisor/
Best - Joe
Joseph Lowery
VP of Product Management, WebAssist -
http://www.webassist.com
Author, Dreamweaver CS3 Bible -
http://www.idest.com/dreamweaver/WebAssist is proud to announce the release of Jeffrey
Zeldman's Web
Standards Advisor, a tool to help web designers reap the
benefits of web
standard compliant sites. Built in collaboration with Jeffrey
Zeldman, the
leading authority on web standards, this Adobe Dreamweaver
extension
includes full HTML and CSS validation as well as checks a
wide range of web
standard issues.
Key features:
* Access W3C HTML and CSS validators from within Dreamweaver
* Validates linked, imported, embedded or inline CSS
* Checks 9 different microformats
* Reviews single page, multiple pages or entire site
* Advises on a range of web standard issues, from classitis
to deprecated
tags.
* Go directly to the code for any reported issue
* Full HTML report, suitable for printing
* Advice on what's nonstandard and how to bring it into
compliance from
Jeffrey Zeldman, author of Designing with Web Standards.
Works with Dreamweaver CS4, Dreamweaver CS3, and Dreamweaver
8 on both Macs
and PCs.
Jeffrey Zeldman's Web Standards Advisor is only $49.99
($34.99 upgrade for
owners of Super Suite and Web Designers Suite).
For more information, visit
http://www.webassist.com/go/webstandards
To check out Jeffrey Zeldman's thoughts on the subject:
http://www.zeldman.com/2009/01/12/jeffrey-zeldmans-web-standards-advisor/
Best - Joe
Joseph Lowery
VP of Product Management, WebAssist -
http://www.webassist.com
Author, Dreamweaver CS3 Bible -
http://www.idest.com/dreamweaver/ -
Configuration tool issue with new release
With this new release - September 2013 - We have found that when doing find products (as opposed to enter sku) the option to add seems to work - it gives a message that its added. But when returning to config the SKU has not been added. Its a bit anyoying as you then have to re-enter the SKU to add the product. - Several staff have observed this at our site.. Others ?
Hello Hsummons,
Thank you for brining this to our attention and we sincerely apologize for inconvenince this might cause.
Please be informed that in order for us to process your request with the steps to take on this concern. We are requesting that you may open a case with us or you may us at CCW Support 1-800-553-6387 options 2 and 3 or you may email us at [email protected] or [email protected]
With this, we may be able to assist you with the CCW Tool. Again, we aplogize for the inconevenience.
Thanks,
Jen
CCW Support Team -
WebLogic Server Tools 1.1.2 Released
The WebLogic Server Tools team has announced the release of a new service release that fixes a number of important bugs. The recommendation is all current users migrate to this release by using the Eclipse update manager. Additional information about this release can be found in the release notes.
Main Page
[url https://dev2devclub.bea.com/updates/wls-tools/]https://dev2devclub.bea.com/updates/wls-tools/
Release Notes
[url https://dev2devclub.bea.com/updates/wls-tools/release-notes/v1.1.2.html]https://dev2devclub.bea.com/updates/wls-tools/release-notes/v1.1.2.html
The Eclipse 3.4 "Ganymede" version of WebLogic Server Tools has also been updated. Version 2.0.1 is now available and has been tested with Ganymede M4 milestone build.
Release Notes
[url https://dev2devclub.bea.com/updates/wls-tools/release-notes/v2.0.1.html]https://dev2devclub.bea.com/updates/wls-tools/release-notes/v2.0.1.html
Cheers
Raj AlagunmalLuca Rossi wrote:
Does 2.0.1 version supports remote deployments (bug 197 on bugzilla.bea.com ?)No, it does not. Remote deployment support is currently being worked on
and will likely be made available sometime in April.
- Konstantin -
WebLogic Server Tools 1.1.1 Released
WebLogic Server Tools team has just put finishing touches on another
release. This is mainly a service release that fixes a number of
important bugs. We recommend that all current users migrate to this
release by using the Eclipse update manager. More information about this
release can be found in the release notes.
Main Page
https://dev2devclub.bea.com/updates/wls-tools/
Release Notes
https://dev2devclub.bea.com/updates/wls-tools/release-notes/v1.1.1.html
On a related note, we now have support for Eclipse 3.4 "Ganymede"
platform which is currently under development. This is accomplished via
a separate version of WebLogic Server Tools that's released in parallel
with the existing Eclipse 3.3 "Europa" version. So version 2.0 of WLS
Tools is the 1.1.1 equivalent for Ganymede. Since Ganymede platform is
still under development we don't recommend this version for most users,
but early adopters with tolerance for pre-release stability can get a
sneak peak of what's coming in the next Eclipse release.
Release Notes
https://dev2devclub.bea.com/updates/wls-tools/release-notes/v2.0.0.html
Konstantin Komissarchik
BEA WebLogic Server Tools TeamHello,
WLS Tools only works with the the admin server.
Interactive development against a managed server is a little different, because they require the admin server during startup and deployment is also a little different with a managed server
is there a specific reason why you are trying to run against a managed server ?
Thanks
Raj -
OpenG Package Builder tool 0.1-alpha6 released
Hello Everyone,
There is a new version of the OpenG Package
Builder tool (ogrsc_package_builder package) available. This tool
allows you to create package files that can be installed using VI Package Manager.
This release resolves an issue caused by a LabVIEW 8.x bug with handling variant coercion (see here for bug details).
See here for more info about this release.
You can download and install this library (as well as all the OpenG libraries) using VI Package Manager.
Thank you,
Message Edited by Jim Kring on 03-04-2007 10:58 PM
Attachments:
package_builder.png 28 KBBob Y. wrote:
OK, but what is it and why should I use it? What need does it fulfill? I have been unable to find much documentation for this at the wiki page and maybe a couple of paragraphs here would help.
Thanks,
Bob Young
Hi Bob,
Yes, this info got burried. Basically, it's a tool for building LabVIEW-based software products. It is highly flexible/extensible and tries to fill the holes left by LabVIEW's built-in Application Builder. Here are some good links to more info:
OpenG Builder Homepage
OpenG Builder 1.0 Documentation
Thanks,
-Jim -
Hi All,
I am trying to convert a book from .fm to .xml by using the inbuilt menu in FrameMaker.But getting the following errors , since I'am a complete newbie in this ,any help is much appreciated.Hi Apoorva,
XML export is not for a complete newbie. It is a complicated process with many moving parts and and endless number of possible pitfalls. Your best bet is to study the Structure Application Developers Reference for a while to get more familiar. This process can take some weeks.
http://www.adobe.com/devnet/framemaker.html
Russ -
ANN: Reverse-engineering tool from Logic Explorers Inc.
Logic Explorers Inc. announces the beginning of the beta program for the CodeLogic
reverse-engineering and code analysis tool. CodeLogic is implemented as a plugin
for JBuilder, JDeveloper, and the standalone application. Among the major features:
- Analyses any Java source code
- Fully automatic generation of interactive UML Class and Sequence (sic!) diagrams
- Unique Execution Flow diagram
- Unique Variables Backtrack diagrams
- Graphical Code Navigator
- Zoom and filters
- Intelligent Diff utility
- Knowledge Base
To get more information, visit Logic Explorers Inc at
http://www.logicexplorers.comI would go with the Forms-Builder itself. If you want to analyze the code and see what action is done at which point, its best to do this in the tool where you developed the application. (You also wouldn't analyze a .Net-application using Notepad ;) )
-
ANN: Spring 1.2 with TopLink Integration Released
Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
To get started, try out the Pet Clinic sample app configured to use TopLink.
NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
- Shaun
Spring Home page: http://www.springframework.org
Spring 1.2 Announcement: http://www.springframework.org/node/86Version 1.2 of the Spring Framework has been released. New in the 1.2 final release is support for TopLink "out of the box". Prior to 1.2, TopLink support was an "add on" that was available on OTN. Now Spring ships with the integration code required to use TopLink as a persistence provider. TopLink 10.1.2 (9.0.4) and 10.1.3 (preview) are supported.
To get started, try out the Pet Clinic sample app configured to use TopLink.
NB: Spring doesn't include TopLink; it provides the necessary integration classes. You still need to download both Spring and TopLink.
- Shaun
Spring Home page: http://www.springframework.org
Spring 1.2 Announcement: http://www.springframework.org/node/86 -
ANN: DBPrism CMS 2.1.0 production released
A long awaited new release of DBPrism CMS was released last month.
This code base is a completed rewritten version of the previous one using native support of Oracle XMLDB and OracleJVM.
DBPrism CMS is the first Open Source Database Oriented CMS using all native implementation of Oracle XMLDB repository 10gR2. It means that DBPrism CMS will provides powerful CMS functionality using two bigger players, Apache Cocoon presentation framework and Oracle XMLDB repository.
The core code of the CMS is around of 960 lines of Java running as Stored Procedures, this code is called by Apache Cocoon presentation framework using DBPrism Generator.
More information at: http://www.dbprism.com.ar/j2-CMS/index.htmlCan I ask you why the documentation doesn't mention any BUG fixes?
Don't tell me that you haven't find any bugs?
The XSLPROCESSOR package kills your session after you use it.. -
[ANN] XINS 2.0 Web Services framework released
XINS 2.0 has been released.
XINS is an open-source Web Services development framework.
XINS accepts the following protocols: REST, SOAP, XML-RPC, XML, Yahoo! JSON and JSON-RPC.
From the specification of the API written in simple XML, XINS generates:
* Documentation of the specifications and implementations in HTML and OpenDocument format
* Test forms, for testing your applications with a browser
* Client-side Java code, supporting load-balancing, fail-over and time-out handling
* Server-side skeleton
* Web application (WAR file), compatible with servlet containers
* WSDL, for SOAP-interoperability
* SMD, for the Dojo toolkit
* Unit test code, based on JUnit
* Stubs, typically used for testing
The 2.0 release adds the following features:
* New protocols: Yahoo! JSON (with callbacks) and JSON-RPC (1.0 and 1.1)
* Import of WSDL and XML Schema.
* WSDL and SMD meta functions
* Better integration with the Spring Framework, the Dojo toolkit and GWT
* Examples with REST implementation, implementation in Groovy and with Dojo toolkit
Links:
* Web site: http://xins.sourceforge.net/
* Features: http://xins.sourceforge.net/features.html
* Demo: http://xins.sourceforge.net/demo.html
* User guide: http://xins.sourceforge.net/docs/
* Primer: http://xins.sourceforge.net/primer.htmlXINS 2.0 has been released.
XINS is an open-source Web Services development framework.
XINS accepts the following protocols: REST, SOAP, XML-RPC, XML, Yahoo! JSON and JSON-RPC.
From the specification of the API written in simple XML, XINS generates:
* Documentation of the specifications and implementations in HTML and OpenDocument format
* Test forms, for testing your applications with a browser
* Client-side Java code, supporting load-balancing, fail-over and time-out handling
* Server-side skeleton
* Web application (WAR file), compatible with servlet containers
* WSDL, for SOAP-interoperability
* SMD, for the Dojo toolkit
* Unit test code, based on JUnit
* Stubs, typically used for testing
The 2.0 release adds the following features:
* New protocols: Yahoo! JSON (with callbacks) and JSON-RPC (1.0 and 1.1)
* Import of WSDL and XML Schema.
* WSDL and SMD meta functions
* Better integration with the Spring Framework, the Dojo toolkit and GWT
* Examples with REST implementation, implementation in Groovy and with Dojo toolkit
Links:
* Web site: http://xins.sourceforge.net/
* Features: http://xins.sourceforge.net/features.html
* Demo: http://xins.sourceforge.net/demo.html
* User guide: http://xins.sourceforge.net/docs/
* Primer: http://xins.sourceforge.net/primer.html
Maybe you are looking for
-
I re-installed XP and kept the old program files on another drive, how can I transfer my bookmarks list to the new Firefox ? I tried shifting the Profile folder contents from the old to the new, that seemed to work but I kept getting a message that m
-
HT201250 Time capsule no longer works after upgrading to Mavericks
I have upgraded to mavericks and my time capusle no longer back up. Will Apple be sending out a fix. Forums show lots of apple apologists trying various work arounds and some losing data. When will Apple be sending out a fix. First Mail was crashi
-
How to import csv data into Oracle using c#
Hello, How to import csv data into Oracle using c #. Where data to be imported 3GB in size and number of rows 7512263. I've managed to import csv data into Oracle, but the time it takes about 1 hour. How to speed up the time it takes to import csv da
-
Keychain have diseapeared!
Hi there, When trying to save a secure note or saving a password (mail account), I was getting an error message saying "cannot find the file". I have tried using the keychain first aid but, the verification failed and I am getting the following messa
-
We are trying to do the following. Can anyone help by providing any pointers as how to do it. 1. A java client will be posting XML over http(s) to the Tomcat server. 2. The Tomcat server has to do the following: - Validate the user credentails and ve