Annotation does not transfer between android and windows....

I originally asked this question in June.
I bought a Kindle Fire.
I downloaded Adobe for Android.
I read some pdf's for work.
I annotated them.
I plugged the kindle into my desktop.
I opened a file explorer on my desktop and went to look at the annotated files on my desktop using Adobe 11 reader.
There was no annotation.
There was no annotation when I copied the file onto my desktop.
There still is annotation when I open the file on my kindle!!!!!!!!!!!!!!!!
There is no sync problem because I am not moving the file through the cloud.
I need the annotation to transfer so I can put it back into my library and continue using the annotated file for research and writing..
Unless this software can do this kind of an operation it is useless to me and severely limits my ability to use my kindle.
Is there a solution?
Is there an update?
My conversation in June was closed by staff after telling me to send the files to [email protected] because the discussion groups don't accept attachments.
They promptly neglected to reply to me.
I have searched my spam folder and found nothing.
Someone dropped the ball.....
please pick it up....
tell me what I have done wrong or that the software does not actually support this....
or someone who can get this software to work under the conditions I described above please tell me how they did it....
Awaiting your solutions.....
solvemyproblemnow

Hi,
We are still investigating this issue and wanted to share few initial results with you.
We are able to see this happening on device having Android version 4.4. Can you please confirm Android version on your device?
And the good news is that things start working fine if we restart the device before connecting to the desktop.
Quick steps you need to follow -
1. Restart your device
2. Now attach it to desktop
3. Try to open files having highlighted text.
It should work after following these steps. Please try and it should solve your problem for now.
Thanks

Similar Messages

Firefox does not save my tabs and windows from last time when I start it although i have already set it so (on Macbook)

Firefox does not save my tabs and windows from last time, although i have already set it so (on a Macbook) (newest version)

If you use [[Clear Recent History]] in Firefox 3.5 and later to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

File transfer between Mac and Windows

I am running Windows on my Mac and I transfer files between mac and Windows alot using my external hard drive. I was wondering if there was an easier way to do this than having to use my external hard drive like a networking solution or something. Thanks...

i also run windows on my mac (for work). The issue i had was that when booted in osx, i could see the windows partition, and copy files FROM it to the mac side, but i could not copy files TO the windows partition.
As i understand it, this is because the apple NTFS driver (to read the windows partition) only allows read access (not read and write access). It was easily solved with MacFuse (which is an open source way to add different disk file systems to your mac, kind of like teaching it a new language), and NTFS-3G for mac osx.
http://macntfs-3g.blogspot.com/
scroll down a bit for the download link. The installer will put in MacFuse and NTFS-3G, so it's the only one you need.
After a reboot, i can read/write to the windows partition while booted into macosx (and it's free).
i hope that helps.
p.s. the efi boot manager download is NOT required.

Flash Player Does Not Work with IE8 and Windows XP

I am using Windows XP VR 5.1 with SP3. Flash Player does not function? So videos will not play that use Flash Player. The Adobe Support Site has been 000 Help because it is a free product. Microsoft says it is an Adobe problem. Finger pointing to the nth degree. I have loaded the latest version of Javascript and Flash Palyer.. Any ideas?

Resetting IE is a shotgun approach, but may be much easier (and faster) for a user than trying to troubleshoot and find exactly which add-on, control, setting is causing issues. For a fast approach, you can reset IE, then start re-installing the add-ons you wish to use. Here is a kb that describes the process and even provides a Fix it: http://support.microsoft.com/kb/923737
If you’d like to troubleshoot, here are some steps that will fix most issues with Internet Explorer and Add-ons. This can be more of a scalpel approach, and could help you save your cookies, stored passwords, etc.
1)      Update your Windows software
a.       Follow the steps below to view updates that are available for your computer.
                                                   i.      Click to go online to the Windows Update website
1.       Note: If Microsoft Update is not installed, you will be taken to the Windows Update website. See the note below if Microsoft Update is not installed.
                                                 ii.      Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
1.       High Priority
2.       Software, Optional
3.       Hardware, Optional
                                                iii.      Select the updates you want, click Review and install updates, and then click Install Updates.
b.      What do I do if Microsoft Update is not installed?
                                                   i.      Follow the steps below to install Microsoft Update and check for updates.
1.       Click to go online to the Windows Update website
2.       Click the Go button next to the Get Microsoft Update Today and then click Start Now.
3.       Review the license agreement, and then click Continue.
4.       After setup is complete, click Check for Updates.
5.       Click Custom to check for available updates. In the left pane, under Select by Type, click each of the following links to view all available updates:
a.       High Priority
b.      Software, Optional
c.       Hardware, Optional
6.       Select the updates you want, click Review and install updates, and then click Install Updates.
2)      Turn off Internet Explorer add-ons you don't recognize
a.       When you visit a website, an add-on might be downloaded without your knowledge, or you might be prompted to download an add-on. These add-ons might cause Internet Explorer to run slowly or become unresponsive. You should remove all Internet Explorer add-ons you don't recognize or trust.
b.      How do I spot malicious add-ons?
                                                   i.      You can usually spot malicious add-ons under the Name column in the Manage Add-ons dialog box. Malicious add-ons might have:
1.       Blank names.
2.       Names that include random characters or have a sequence of numbers and letters (for example, fhriduvh.dll or f6rid8vh.exeas as opposed to Windows Messenger).
3.       A publisher name you might not recognize.
c.       How do I disable an add-on?
                                                   i.      Open Internet Explorer.
                                                 ii.      Depending on your version of Internet Explorer, do one of the following:
1.       In Internet Explorer 6, click the Tools menu, and then click Manage Add-ons.
2.       In Internet Explorer 7, click the Tools menu, point to Manage Add-ons, and then click Enable or Disable Add-ons.
3.       In Internet Explorer 8, click the Tools menu, click Manage Add-ons, and then click Toolbars and Extension (if necessary). Also note the drop down list labeled “Show:” You are interested in Add-ons and Downloaded
4.       Follow these steps to determine the version of Internet Explorer you're using:
a.       Open Internet Explorer.
b.      Press ALT+H, and then click About Internet Explorer.
c.       How can I find which version of Internet Explorer I'm using if it won't launch?
                                                                                                                            i.      If you're unable to launch Internet Explorer you can use the following steps to determine the version you're using:
1.       Click Start, click Run, type %ProgramFiles%\Internet Explorer, and then click OK.
2.       Right-click iexplore, click Properties, and then click Version.
3.       Under Item name, click File Version. The version number appears under Value to the right of File Version.
a.       Note:If the file version number begins with 6, you have Internet Explorer 6. If the file version number begins with 7, you have Internet Explorer 7. If the file version number begins with 8, you have Internet Explorer 8.
d.      If you aren't using the latest version of Internet Explorer, consider updating.
                                                                                                                            i.      How do I update to the latest version of Internet Explorer?
1.       Click to download and install the latest version of Internet Explorer
                                                                                                                          ii.      How can I update Internet Explorer without launching my web browser?
1.       Click to go online to the Windows Update website.
2.       Click Custom to check for available updates.
3.       In the left pane, under Select by Type, click Software, Optional.
4.       Select the Internet Explorer update, and then click Review and install updates.
                                                iii.      Click the name of the add-on.
1.       Click Disable. You might have to restart Internet Explorer for the changes to take effect.
2.       Why do some add-ons include (Not verified) in the Publisher column?
a.       If (Not verified) is displayed in the Publisher column in the Manage Add-ons dialog box, the add-on itself is not digitally signed even though the program that installed it might be. A digital signature verifies that a file comes from the person or publisher it claims to be from, and that no one has tampered with it since it was digitally signed.
3.       How do I disable an add-on if I can't access Internet Explorer?
a.       Click Start, and then click Control Panel.
b.      Double-click Internet Options.
c.       Click the Programs tab, and then click Manage Add-ons.
d.      Click the name of the add-on you want to disable, and then select Disable.
e.      When the Add-on Status dialog box appears, click OK to close it.
3)      Perform a free Full Service Scan using Windows Live OneCare safety scanner (not necessary if you don’t suspect viruses and are confident in the protection you have on your machine).
a.       Go to the following website, and then click Full Service Scan: Windows Live OneCare safety scanner
                                                   i.      http://go.microsoft.com/fwlink/?linkid=56726
If you are still experiencing issues, perform these steps. If the issue subsides, you may discontinue the remainder of the steps
1)      Disable all add-ons (one at a time) until you can no longer reproduce the problem
a.       Close all Internet Explorer windows.
b.      Click Start, and then click Control Panel.
c.       Click Network and Internet Connections, and then click Internet Options.
d.      Click the Programs tab, and then click Manage Add-ons.
e.      Click the name of the add-on you want to turn off, and then, under Settings, click Disable.
f.        Click OK.
g.       Restart Internet Explorer. Continue using Internet Explorer the same way you did when you received a crash report. If Internet Explorer continues to crash after disabling this add-on, continue with the next step.
h.      Repeat steps b through g for each add-on listed. When you can no longer reproduce the problem, the most recently disabled add-on is the cause of the problem. Once you discover the add-on that is causing the issues, you can uninstall it (use Manufacturer’s uninstaller if one is provided) then if you wish to continue to use the add-on, install the latest version from the manufacturer’s site.

WCCP does not work between WSA and ASA

I have configured WCCPv2 between WSA S160 ( 6.3.1-025) and ASA5540 (8.2(1)109).
Everything seems to be OK by "show wccp *" on ASA and showing wccp debugging messages (level 4) on S160. Despite of it, WCCP redirection does not work.
If I use packet-capture I figure out that S160 receives GRE packets with TCP SYN from particular LAN host to WWW sites but S160 does not handle them and does not send anything back to ASA.
It is an Exempt from authentication for this LAN host and in Forward proxy mode everything works well.
I have attached an example of a packet-capture (S160.txt - renamed from .cap) and debugging messages from S160 & "show" from ASA.
Does anybody have any idea what the problem is and how I can resolve it ?

IronPort Support team helped me to find the trouble:
If I wish to handle specific port's (80, 8080, etc.) traffic by the transparent proxy I need to configure this port like a listener for the FORWARD proxy
("Security Services" -> "Proxy Settings" -> "HTTP Ports to Proxy")
The WSA guide doesn't clearly say about it.
So the Discussion can be closed ...

Calender does not work between IOS5 and IOS4.3 iPad

We have two iPads. One is unfortunately on IOS5 and the other is on IOS4.3. When i activate the calender on both devices the shared calender is seen on the IOS4.3 iPad but not on the IOS5 iPad. Whatever i try using google accounts or iCloud it only works one way. Seems like another bug in IOS5? The CalDav fucntion that is proposed on multiple answers does not seem to work at all on the IOS5 iPad, it simply does not accept the password. Is there a simple way out? Or would i need to upgrade the second iPad also to IOS5 as i cannot downgrade the first iPad back to IOS4.3?
help...

The iOS 4 device will not be able to use iCloud, of course.
As to Google calendars, I found that there's something different about how Calendar works in iOS 5. I had a couple Google calendars that I was subscribed to in iOS 4, but when I upgraded, those calendars stopped updating, and I could not figure out for the life of me where those calendars were defined. I ultimately had to remove them and then re-add them in Settings > Mail, Contacts, Calendars. Click Add Account, and if you only want a calendar, click Other, then Add CalDAV Account or Add Subscribed Calendar.

Group Messages Not Working between Android and iPhone Users on iOS7

Hi there,
I am a former iPhone user. I recently converted both my line and my wife's line from the IPhone 5 to a Motorola X Android phone. We kept our same phone numbers, but we completely switched from Verizon to AT&T. I have noticed that text messaging works perfectly on an individual basis when I correspond with individuals who have the iPhone, but Group Messaging is not working correctly. I am able to send messages to a group and they receive them just fine, but when they respond back to me, I do not receive their responses (as it appears they are going through as iMessages). My wife is having the same issue on her phone. After doing some detective work, I have found that hundreds of other users are having the same issues on their smartphones when they make the switch from an Apple product to an Android phone. There are a variety of "bug fixes" listed on the web, but I have completed all of them and I am still having the same issue. Here is what I have done so far...
*Factory reset both of our phones and removed the SIM cards (since we are with a new phone carrier)
*Changed both of our apple ID passwords
*Removed both of our phone numbers from Apple's database all together
*Unregistered both of our iPhone products with Apple
*Had all of my friends/family switch SMS to "On" in their Settings tab
So now what? I read one post on an Apple forum that said that they are aware of the issue and we can expect a fix in a future iOS update...but when is that going to occur, if at all? It is problems like these that led me to leave Apple all together, and here I am after having left the company, and I am still left high and dry searching for solutions to my problems. Who can help, and how can I remedy the situation?
Anything you can provide to help out would be great.
Thanks.

There are reports of iOS7 altering the settings on iMessage's connection to the iPhone. Verify that each of the iPhone and the Mac is receiving on the "channel" (phone number or email address) on which the other is initiating iMessages.

File transfer between mac and windows 7

Is it possible to transfer files between my Mac and a windows 7 machine via bluetooth?
MacBook Pro OS X 10.6.4
Thanks

It will be slow, but there's no reason it shouldn't work as long as the Bluetooth hardware on both computers has the File Transfer Profile (all Macs do), and *Bluetooth Sharing* is checked in the Sharing system preferences pane on the Mac.
If the computers are close enough to send files via Bluetooth, you'd be much better off just networking them together. You can then "mount" the PC hard disk on the Mac like any other disk and move files around easily. It will be hundreds of times faster too.

Sound does not switch between speaker and headphone after audio driver update

I have a dv9843cl. I downloaded and installed the latest audio driver (Realtek High Definition Audio Driver, version 6.0.1.5548A). But the laptop is not able to switch back and forth between laptop audio and headphone audio. Whenever I plug in my headphone, the sound would play from the laptop instead of the headphone. I have to manually set the headphone to default in order for it to work. How do I fix it to make the laptop recognize the headphone for it to switch automatically? Thanks

Hi,
Uninstall Your current audio driver.
Resources:
Uninstall or change a program in Windows Vista
Install latest driver:
Realtek HD audio here
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Airdrop does not work between Mac and iPhone

Hi,
i have an iMac 27" late 2013 with OSX 10.10.1 on it and an
iPhone 5s with iOS 8.1.1 installed.
Both have WiFi and Bluetooth turned on.
The iPhone can see all other iPhones around me but neither my iPhone nor alle the other iPhones can see my Mac and visa verse.
I could not yet test if the Mac is able to see any other mac in Airdrop because i have no other Mac around.
I already did a PRAM reset but that did not help.
Any suggestions?

I think you have to be running the same OS on those two devices in order for AirDrop to function properly.
Aidrop is pretty much usless unless you are in a need to transfer files between your macbooks and iMacs and vice versa; how many average OS users have two macbooks or two iMacs????
But that's why a great number of Apple users would like to transfer their stuff from their iPads and their iPhones to their Macs every day. I really hope this is on the to-do list by Apple, otherwise it would be shame not to have Airdrop that is cross-platform functional.

The number of photos in an event does not match between iPhoto and iTunes

Hi,
Not sure what's up but the number of photos in one of my events in iPhoto is 19 but on iTunes it shows (and syncs) as only 9.
Any ideas?
Jennifer

Not that I've heard -- but it looks like 250,000 for iPhoto -- a bunch
Apple - iLife - iPhoto
iPhoto makes sharing photos faster and simpler than ever before. It also adds great features, including Photocasting, support for up to 250,000 photos, easy publishing to the web, special effects, and new custom cards and calendars.

Photo count does not match between iPhone and Aperture Album

I have several Aperture albums synced with my iPhone. In one instance, I have an album that in Aperture has 272 images, and on the iPhone has only 62. The 62 on the iPhone are not the first or last 62, but an assortment over the span of the 272, with no apparent rhyme or reason. All the images in Aperture are in the library (none are missing), they are all the same size, format, etc.
For reference, my iPhone has a total of 680 photos in 13 albums, the largest album is 164 photos. There is almost a gig of space left on the 8GB iPhone, so it is not running out of room.
How can I resolve this, or is there a fix/trouble ticket on the map for this? Help!!

Hi. I had the same problem. It was resolved after I selected the all the photos in that album then go to Aperture Menu > Images > Update Preview.
The photo count shown in iTunes was correct after that. Hope this helps.

My i7 does not switch between nvidia and intel

I have a new 15" MBP, i7 which runs nvidia graphics all the time. I am running Cody Kriegers GFX CardStatus which is reporting nvidia graphics run at all times. I can manually switch to intel but as soon as I set it back to dynamic switching it switches back to nvidia. When the machine boots it goes straight to nvidia even tho no applications are running. On boot, the only significant processes running are dropbox and fusion helper. Any ideas why the machine runs nvidia exclusively?

Resolved. Auto graphics switching option in the System Preferences|Energy Settings was turned off. Turned it on, logged off and back on. Seems to be working fine.

OSX 10.6 does not differentiate between PS or illustrator .eps files

Have other people encountered this problem?
I have found that snow leopard does not differentiate between photoshop and illustrator .eps files in order to double click and open them.
Does anyone know how to correct this?

Hello Chris,
Thanks so much for clarifying about OSX 10.6 opening .eps files in illustrator or photoshop.
I was wondering if you knew out how
to create a droplet that opens multiple PDFs and saves as .gifs.
When I
try to do it, all of the .gifs end up having the same name as the file
that I created the script with, and a "-1" at the end.
Actually
there are two droplets that I want to create (to be able to
drop multiple pdf files):
Portrait/Square
script:
Final thumbnail file to be 51 pixels wide by (x?) pixels
tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Landscape script:
Final thumbnail file to be 65 pixels wide by (x?)
pixels tall
Final thumbnail file should be 72 dpi,
Final
thumbnail file should be flattened(no transparency in white areas),
Final thumbnail file should have a 1 pixel wide Grey border to all
sides
Final thumbnail file should be saved as a GIF file, RGB
Thanks,
Matthew
Date: Wed, 14 Apr 2010 14:48:11 -0600
From: [email protected]
To: [email protected]
Subject: OSX 10.6 does not differentiate between PS or illustrator .eps files
Given EPS files are "really" Illustrator files (Photoshop not being a
vector application), you probably want to make Illustrator the default.
No.
EPS files can be produced and read by many applications.
And most EPS files cannot be read by Illustrator.
Frequently EPS files in particular need to be edited in the application which created them (Freehand vs. AI vs. Quark gradients anyone?).
>

Annotation does not transfer between android and windows....

Similar Messages

Maybe you are looking for