Annotation Tool only accepts MOV in Final Cut Server 1.5

Just a warning to anyone else bitten by this one...
We used a custom proxy format of MP4. This worked just fine in FCSvr 1.1.1 in all aspects, including the annotation tool.
Now with FCSvr 1.5, only MOV is accepted in the annotation tool. For us this is bad, we have a lot of proxies to re-generate. Hopefully I'm one of the few.

From my findings, the annotation window in FCSvr 1.5 only support using Clip Proxies that are
1. Encoded using H.264
2, Wrapped in a .mov file container
3. Contain a time code track
All the above ensures that annotations are accurately matched to the source assets time code. This is pertinent because annotations and be exported via WriteXML and imported via ReadXML.

Similar Messages

TS1846 I have edited a movie in Final Cut Pro and the video has been smoot all the time. Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies. What is wrong? Sudd

I have edited a movie in Final Cut Pro and the video has been smooth all the time.
Now, when the one hour long movie is ready the video seem to paus every 5 sec (only for half a second). It does it all the way through the movies.
What is wrong? All the sudden.

We need info, info, info!
What version of FCP X?
Did you render? what are the project specs? do you use many compound clips? how much ram, hard drive space, how is the hard drive connected?
It looks like your mac can't keep up. Maybe the bottleneck is the hard drive, or something else.
Try exporting a master file and see if the video is ok.
Also, keep Activity Monitor open and see how much memory pressure you've got.

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

I want to purchase a powerbook that will run a music program like MOTU or Pro Tools as well as run Final Cut Pro without being sluggish...any help?

The only way that would work out is if you ran exactly the versions that were made for old PowerBooks. Anything newer may require Intel and not run, or will strain the poor old G4 CPU.
Your needs have to be modest, too, because the problem with older music and video software is that they are not current as far as formats and codecs for the Web. If you want to output H.264, the current standard for YouTube/Flash video, older software may not support it, and in addition, H.264 is processor-intensive and is tailor-made for today's multi-core, 2+ GHz processors. It will overwhelm a G4. A PowerBook G4 can barely play YouTube videos.
More perspective: The PowerBooks worked great for miniDV format editing. In other words, 480i SD/standard definition video in use from the late 1990s to the late 2000s. If that is all you want to do, edit tape from an old miniDV camera to SD output, then OK.
But if you want to edit today's HD video, whether 720p from a snapshot camera/iPhone 4 or 1080p from a DSLR, the PowerBook and the software for it will either not recognize AVCHD/H.264, or it will slow the PowerBook to a dead crawl.
I'm in agreement with the above: Intel Macs have been out for so many years that getting a used one is a much better deal than a dead-end PowerBook. And I loved (still love) my PowerBooks.

Correct way of importing an iMovie 6 movie into Final Cut Express?

Hi,
Many thanks in advance for your attention.
Any correct way to import an iMovie 6 HD movie into Final Cut Express for further editing?
I tried.
1. I Exported the iMovie, at Full Quality and it made a Quicktime version of that movie.
2. I then Imported this Quicktime version into Final Cut Express.
3. The audio was smooth, but at regular intervals, the video freezes for a second (and then moves on).
4. The movie plays smoothly back in its original iMovie incarnation and in its Quicktime incarnation. Only in Final Cut Express is there this intermittent freezing. Stop and start.
5. I have Final Cut Express 3.5.1 and iMovie 6 HD.
Thank you,
- Ross

"Full Quality" QuickTime export from iMovie gives you a DV stream which will need rendering in FCE. Rather than "Full Quality," choose "Expert Settings," and then the following:
Video
DV-DVCPRO - NTSC (assuming you're in USA)
Sound
48kHz
16-bit

TS2865 when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.

when i export movie from final cut pro to quicktime , something happened. it says error quicktime -50. please help.
i need to submit this movie for uni project tomorrow.
any help/advice will help . thanks.

According to Crash Analyzer
-50 (QuickTime)
This error occurs when there is corrupt or invalid media in your timeline. Check that the codec used by the file is recommended for use in your editing application.
good luck

I have an hd movie on final cut pro x; i want to create an sd disk of that movie. compressor created 2 files: dolby.... and mpeg2. How do I get these files burned to disc to create my sd movie?

I have an hd movie on final cut pro x; i want to create an sd disk of that movie. compressor created 2 files: dolby.... and mpeg2. How do I get these files burned to disc to create my sd movie?

These are elementary streams and they would be used by DVD authoring apps that use them for reasons like foreign language capability. Examples would be DVD Studio Pro, Adobe Encore, Toast.
The most straightforward way to burn your DVD is either to use the Share feature in FCP or the Batch Template feature in Compressor.
If you can find a boxed copy of iLife (try Amazon), it should have iDVD as part of the suite of apps. iDVD offers far more complete authoring capability than FCP or C4. iDVD doesn't work with elementary streams; you'd just drag in your HD movie and you'd be good to go.
Good lluck.
Russ

Exporting movie from final cut express4 direct to apple tv

How can I export my completed movie from final cut express 4 to apple tv? This will be my first attempt. I have looked at the forum but cannot find a solution. I am fairly new to computing, (oap)!

Welcome to the  Discussion Forums.
The easiest method would be to export using Quicktime conversion and select the 'movie to Apple tv' option from the resultant dialogue box.

When saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

when saving Quicktime.mov from final cut it says error or memory full. I have 16tb of memory between 4 drives any insight?

I've shutdown, restarted and opened project and saved again. but it still reads the same...

When i try to play a movie in final cut pro it comes out black

when i try to play a movie in final cut pro it comes out black thanks jt i have
version 10.00

Open the movie in the QuickTime player and report exactly what it says in the movie inpstecor. It's probably not in a spce that FCP supports.

How do I migrate metadata from Final Cut Server for use in Premiere?

We're one of many companies looking to move to Premiere Pro from Final Cut.
We have thousands of tagged clips in Final Cut Server and I'm trying to find a way to export all that metadata so it can be used, and searched for, within Premiere Pro.
Does anyone know if/how this could be achieved?
The only thing I've found online that seems to be relevant is this:
http://www.andre-aulich.de/en/perm/export-asset-metadata-from-final-cut-server-using-built in-tools-only
This seems to explain how to export the metadata (although I don't fully understand it) but not how to make it useful for Premiere.
Any help would be greatly appreciated!

Well... I'm a librarian by training so I use Cat-DV a little differently.
I use it to make a searchable archive of proxy files for entire hard drives. I hook up a hard drive (say an old external) and point Cat-DV at it. It makes a catalog (locally) that has all the metadata (most importantly "date created") and a small proxy or thumbnail if it's a still. Then I unplug the drive, label it and put it on a shelf. When I need to find something all I have to do is consult the local catalog. I can search it (if I included any metadata) or, most likely, I'll just scrub around for date created. Cat-DV will display the exact path to where the asset is. I can search across multiple catalogs of drives without ever having to plug one in, Once I find the file I want, I just plug in that drive to retreive the file.
I use it mostly for stills and some b-roll that gets used over and over. For a variety of reasons, we never opted to make it a full replacement for FC Server.
And another thing... you can do a heck of a lot with the $99 or $300 version. You don't need to go the full enterprise server route (though you do have to do that to use the server functions).
You might also want to try Adobe Bridge for searching and editing metadata. In my experience, it's always been slow with video but that may well have changed. I haven't played with it in a while

Is Final Cut Server is the right software for our company?

I need a software that catalogs and keeps organize our media. Our company is using Final Cut Pro 2 and want to keep stock footage. Apparently, were not doing a good job of organizing our media and files. I'm researching a software that can organize and catalog media and files. Does Final Cut Server is software can do that?
Thank you
Luis

Yes and no.
I know that's not the best answer, but final cut server is a very powerful organizational tool, but you also need to very organized in what you put into it and especially during initial setup.
For example, you say your company is apparently not doing a very good job organizing right now, so lets say you had 300 quick times labeled documentary1.mov, then documentary2.mov and so on, having a piece of software catalogue footage in that manner will not do you any favours in the long run.
However, if you were to say establish a production, "PBS Documentary" and then ensure that all clips are labeled very specifically, then keeping them and being able to search them as a part of a stock footage library could be very useful, as you are not only able to locate clips based on key words, but also preview the footage to make sure it is something you would want to use, and determine the current location of that file.
I suggest you check out apple's videos on FCserver, they will give you a pretty good idea of what the software is designed to do.

Long HDV and XDCAM clips through Final Cut Server

Hi,
I know that I could post this in Compressor and/or Quicktime and/or Leopard/Tiger Forums, but as this problem it`s causing my Final Cut Server to not working well, I think it makes sense to post here.
To resume: HDV and XDCAM clips (all on original codec, only xdcam transferred to mov in xdcam transfer) with file size bigger than exactly 4GB always FAILS in "Final Cut Server"/"Compressor alone in ANY machine installed from scratch"/"Anything that uses Quicktime". Source and Destination being localy or networked. DV or DV50 can get bigger than that, I`ve never seen this error with DV`s codecs.
I had seen this problem before I bought final cut server. When I was transcoding our interviews for transcription. We always worked with BETA SP and captured in DV or DV50. We were starting to go to HDV and now to XDCAM and this error has started to appear.
I have a "proxy" made a year ago from a HDV and it`s original has 8GB. I tried this file again and as I expected didn`t work. In ANY computer with any installations with only the latest updates. I`ve remembered that I was using Tiger at this time, and Quicktime/Tiger/ProApps had a old version.
My two cents are that some update from Tiger/Leopard/QuickTime/ProApps made this happen.
So ANY HDV/XDCAM file bigger than 4GB it`s FAILING in ANY system. (Tiger or Leopard, With or without FCP and QT PRO, Installed from scratch and updated every thing).
Some tests I`ve made:
-Compressor works with this two codecs to lower res in TIGER and with QuickTime Version 7.4.0 and LOWER. (had to be tested, but I think that was my version of QT when I managed to make the proxy of this two codecs).
-Compressor doesn`t work on any system with QT above 7.4.0.
-CATDV (http://www.squarebox.co.uk/) version 6 can make proxy versions of this two codecs in TIGER ONLY! They already know of this problem and CATDV 7 works on both.
-Compressing in compressor with H.264 (same codec as the FCSvr proxy) BUT without changing the resolution, size and etc. Works OK in both Tiger and Leopard.
-Exporting through QT works in ANY system BUT I loose TC, so it`s not an option (and I can`t input this workflow in FCSvr without using compressor).
-Exporting from FCP as QuickTime Movie with H.264 doesn`t work on Both (Tiger and Leopard).
-Exporting fro FCP as QuickTime Conversion with H.264 works but as exporting from QT I loose TC and can`t input this into FCSvr workflow.
Error message are always: "QuickTime error = -50" or "QuickTime error: corrupted data" (and of course it`s not corrupted because it`s used - even in FCP to edit - and opened viewed, catdv can do proxy and everything).
I`m surprised not to see anyone freaking out about this issue... I don`t think that It`s only me.
This is some problems that I came across while trying to find a solution:
http://www.paulescandon.com/blog/?p=39
http://discussions.apple.com/thread.jspa?messageID=4912265&#4912265
http://www.squarebox.co.uk/faq155.html
http://discussions.apple.com/thread.jspa?messageID=5513003&#5513003
http://discussions.apple.com/thread.jspa?threadID=1903644&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1780228
http://discussions.apple.com/thread.jspa?threadID=1853507
As you can see this is not the first time I`ve posted about this issue.
I`m sending a bug report as well.
Thank You all in advance.
Regards

Hi Chará!
We should, but I think the others will be disappointed eheheheh.
It doesn`t matter what version of Leopard I`m using (right know I`m using Leopard Server 10.5.6, but this issue has happened even with 10.4 if QT is updated and all updates of 10.5 up, as I`
ve mentioned above).
What file size are those clips that are longer than 10min?
I really don`t get, how it`s possible that just the two of us has HDV and XDCAM files with file size longer than usual? Maybe people that do interviews don`t like to record the entire interview and when capturing those clips would be under this file size limit? Or maybe we are the only ones in the whole world that transcode longer HDV and XDCAM clips (it`s funny that it doesn`t even need to be FCSrv, with only ONE machine and compressor this issue happens all the time).
I`m convinced that I have to install a Tiger version in a virtual machine with compressor and doesn`t update anything to test this further on. But I`m certain that with TIGER and CATDV this works ok! And I think that CATDV uses QT engine to do this transcodes.
This is too much of a mystery to me. Maybe it`s time to spend 24+ hours with apple in a international call and probably not getting anywhere.
I`m only posting this here in FCSrv forum because this issue it`s must worse when you have hundreds of clips with this issue and if you bought the package it doen`t matter if it`s a problem with QT+OSX or whatever, apple has to solve it for FCSrv use.
Do you reckon?
Let`s get in touch through email: lucas at rwcine.com.br
(at = @ and delete spaces).
Regards

SLS and Final Cut Server

Hi.
I'm running FCServer on an iMac, and I'm currently looking for the best solution for giving co-workers outside of our office network remote access to our FCS database. The main purpose for this is for remote users to screen and download episode segments and movies from our database.
I was initially thinking VPN would be the only solution, but then I saw Snow Leopard Server has 'Mobile Access Server' built right into the OS, which appears designed to help users avoid having to use a VPN.
Before I go out and buy SLS for the company, I want to be sure it will work. Am I correct that Snow Leopard Server, and the built-in Mobile Access Server, will allow users outside of our network remote access to our FCSrvr database?
Any help would be greatly appreciated.
Thank you!

Thank you for your response.
I posted this in the Final Cut Server forum as well and got this response:
+"Mobile Access Server will give outside access as VPN would, which will be handy if you want to access Final Cut Server using the Java client app. It will also give you VPN access for non-FCSvr uses, like email and Web.+
+If all you want is a subset of your FCSvr database, then you could also publish selected content to a Web/FTP/WebDAV server in your DMZ."+
If anyone else could offer some insight it would be greatly appreciated. I'm just an audio/video post-production guy, so this is all a little outside of my training.
Thanks.

Final Cut (Server) as an application server for web-video ??

Hi,
we are currently evaluating different solutions to automatically postprocess video files, which are uploaded to a web-server.
The video files are flash-videos (flv) uploaded from the public internet to our web-server. Each uploaded video has to be postprocessed, (applying some slight color grading and processing the audio with audio-units plugins) and finally converted to a h264 video file. The Webserver and the workstation are connected by ethernet or a fast internet connection.
Is this possible with the Final Cut (Server) automation features?
Any feedbacks, ideas or alternatives are welcome.
Thanks in advance fom Berlin, Gemany,
Manfred

Final Cut Server's video processing is limited to what Compressor can be set up to do with a file. The rest of the automation potential lies with communication among teams of users and file movement. FLV is not readable by default (via QuickTime), so you would still need the Episode Engine plugin to be able to process FLV inputs. Final Cut Server does not script the comings and goings of the applications in the Final Cut Studio suite, it is a tool for managing multiple artists and editors all batting work around to each other and feeding it to producers for approval and feedback.

Final Cut Server Edit Proxy

Hi,
I need to do remote editing (with FCP7) over small bandwith WAN (1Mbps) therefore I configure Final Cut Server (V1.5.1) Edit Proxy to use a Quicktime H.264 codec with the following parameters:
File Extension: mov
Estimated size: unknown
Audio Encoder
AAC, Stereo (L R), 48.000 kHz
Video Encoder
Format: QT
Width: (100% of source)
Height: (100% of source)
Pixel aspect ratio: Default
Crop: None
Padding: None
Frame rate: (100% of source)
Frame Controls: Automatically selected: Off
Codec Type: H.264
Multi-pass: Off, frame reorder: On
Pixel depth: 24
Spatial quality: 0
Min. Spatial quality: 25
Temporal quality: 50
Min. temporal quality: 25
The workflow is:
The remote editor choose on Final Cut Server the FCP project he has to work on, do a Check Out of the project on his Final cut Pro 7 local station by selecting "use: edit proxy" and "keep media with project". Project and associated footage are then uploaded from the server to the remote FCP7 station with no problem.
When the upload is complete, the editor simply open the project file to start editing on his station. This workflow was working allright till january: when opening the project the FCP7 doesn't reconnect the media with an error message:
"one or more of the updates requested by Final Cut Server could not be applied. (one or more replacement (s) had unexpected track setting.)" and media files are Offline! When trying to reconnect manually by indicating the proper path for the missing files, I have to uncheck "Matched Name and reel only" to select the edit proxy files. It looks like it was still linked with the original media...
Looking at the project file, the paths for the proxy files are the proper ones...
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>fileSubs</key>
<array>
<dict>
<key>newurl</key>
<string>file://localhost/Users/XXXXX/Desktop/testbdw10/media/_FCS__XXX.XXX.XXX.XXX/dev/3/1670_179_004301.mov</string>
<key>originalurl</key>
<string>file://localhost/Macintosh%20HD/Users/XXXXX/Documents/Final%20Cut%20Pro%20Docume nts/Capture%20Scratch/Untitled%20Project%201/179004301.mov</string>
</dict>
<dict>
<key>newurl</key>
<string>file://localhost/Users/XXXXX/Desktop/testbdw10/media/_FCS__xxx.xxx.xxx.xxx/dev/3/1674_179_003601.mov</string>
<key>originalurl</key>
<string>file://localhost/Macintosh%20HD/Users/XXXX/Documents/Final%20Cut%20Pro%20Documen ts/Capture%20Scratch/Untitled%20Project%201/179003601.mov</string>
</dict>
</array>
<key>version</key>
<integer>0</integer>
<key>versionMin</key>
<integer>0</integer>
</dict>
</plist>
If I change the Edit Proxy setting for ProRes 422 (Proxy) on Final Cut Server edit proxy setting then the reconnection is working OK. I cannot use this workaround as the files are then far too big to be tranferred over a 1Mbps WAN.
The setup with the Quicktime H.264 edit proxy was working fine after, it seems, the installation of Pro applications update 2009-01 issued end of october 2009, but since january 2010 it does not work anymore.
Final Cut Server is version 1.5.1 with Mac Os X server is 10.5.8
Editing station are running Final Cut Pro 7.0.1 and Mac Os X 10.5.8
What could be wrong ? Does anybody encountered this type of problem?
Any suggestions welcomed!
Thanks.

I'm dealing with this issue right now (FCSv 1.5.1 latest pro app updates, 10.6.2, FCP7). I was under the impression that you could make edit proxies that were 25% resolution (as opposed to just using an efficient codec), but Final Cut Pro is having a rough time getting it right. I too am only getting success with ProRes-Proxy, audio passthrough, and 100% res/everything else. I tried using Apple Intermediate Codec with default "100%" settings and audio passthrough but had no luck. It's way heavier than ProRes Proxy anyways.
The only suggestion I can make is try your h264 solution with audio passthrough (or Linear PCM) instead of AAC. If that makes a difference we're on to something. Some people started having this issue after an iTunes update, so maybe AAC is the source of the problem.
The edit proxy workflow really needs tweaking from Apple to cater to internet-based solutions rather than fiber/SAN environments where bandwidth is a non-issue.
I'll report back later after some more testing.

Annotation Tool only accepts MOV in Final Cut Server 1.5

Similar Messages

Maybe you are looking for