Annotations lost after failed cloud save

I had a PDF file opened for several days in Reader in my Nexus 7 tablet. I had made several annotations.
At some point, after I had added a couple of annotations, I uploaded the file to Acrobat.com, and continued working with the version on Acrobat.com.
Unfortunately, today I encountered a problem when I was having trouble trying to select a highlight to change its colour. I was tapping a lot and long-pressing. For some reason, at that point Reader suddenly decided to try to save the file into the cloud - and showed a message saying it had failed to save it. It's not surprising that it failed, because I wasn't connected to any network at the time! Simultaneously, it returned me to the Recent documents list, and removed the file from the Recent documents list.
I found a copy of the file saved on my tablet, but this did not contain the new annotations, only the initial ones. Maybe that copy was just the old version before I uploaded it to Acrobat.com, I'm not sure.
Anyway, is there any way I can get my other annotations back?
They are not in the Acrobat.com version either (I checked on my PC) because every time it has tried to save to the cloud, there was no network. So this also only contains the initial annotations.

Similar Messages

Session lost after fail over. (I kill down the server during servlet invocation)

          I just tested the failover ability of our WebLogic
          cluster. We have two instances, first, I logged onto
          the web site and created a session, and then I called
          a servlet, in which there is a complicated computation
          which will take about 5 seconds, during the
          invocation, I issued the kill -9 to shut the server
          down at once. It did failover, but the http session
          was lost,So I got the session timeout page. But if I
          kill down that server after the invocation, then it
          can failover succesfully without loss of session.
          Could you tell me is there any difference between
          killing down server during and between invocations of
          servlet or JSP?
          The configuration:
          WLS5.1 with sp8. Solaris 5.8
          Using in memory replication.
          Thank you very much for your help.


          I just tested the failover ability of our WebLogic
          cluster. We have two instances, first, I logged onto
          the web site and created a session, and then I called
          a servlet, in which there is a complicated computation
          which will take about 5 seconds, during the
          invocation, I issued the kill -9 to shut the server
          down at once. It did failover, but the http session
          was lost,So I got the session timeout page. But if I
          kill down that server after the invocation, then it
          can failover succesfully without loss of session.
          Could you tell me is there any difference between
          killing down server during and between invocations of
          servlet or JSP?
          The configuration:
          WLS5.1 with sp8. Solaris 5.8
          Using in memory replication.
          Thank you very much for your help.

Failed Manifest Save???

I have been using the same e-reader on ADE and today I tried to download some books from my library when this error appeared:
Error during recover after failed manifest save
Error restoring backup file F:\DigitalEditions\backup_manifest.xml to F:\DigitalEditions\backup_manifest.xml
Error detail: Error # 2038
Now I can't open any files on my e-reader - the book titles appear, but when I try to open one it says "Failure to open file".
Also, every time I open ADE and connect my e-reader, ADE asks me to authorize my device. I've received the "too many activations" error twice tonight already, and have had to contact Adobe Help to reset it...there has to be an easier way around this! When I asked them about it, they gave me a link that said would answer my problems (http://forums.adobe.com/message/3044249#3044249) but it did nothing for me.
Any help would be greatly appreciated - I am in the middle of a fantastic book but can no longer access it on my e-reader!!!!!!!!!!

Hi,
Regarding your problem please follow the steps as given below.
Delete following folder from your computer.
C:\Documents and Settings\Username\My Documents\My Digital Editions\restore.
Please Note : Location of the folder may differ according to your operating system
Regards
Rizwan

Importing video through firewire fails to save video

Hello,
I am capturing video from a live event using the import feature of FCPX. I captured 14, one hour talks at a conference and on two of them, it failed to save the captured file to the disk. On both, I have pieces of the talk (7 minutes on one, 5 minutes on the other), but it appears to have stopped importing prematurely after capturing these snippets. Because this was a live conference and I do not have a tape back up, I believe the media is completely lost! One additional note, I was using Adobe Media Encoder throughout the conference and in particular, during the two talks that were not fully imported. Could this be a resource issue where the import locked up and failed to notify me?
Any help the community can provide will be greatly appreciated. While I am almost certain I cannot recover my imported files, I would like to know the source of the issue so I do not experience it again.
Best regards,
SA

Can't say I know 100% what's caused it but persuonally I've notice I can do very little on my 2011 MacBook Pro, especially when rendering, exporting or even something as little as synchronizing a clip. I'm guess that's most likely caused your stoppage.
Honest speaking, though I use FCPX 15-18hrs a day, there is no way in the world I'd trust it to live capture an event, especially not having some form of hard copy solution..! :/
Anyway sorry to hear, nothing worst than having to explain that to a client :(

Mail Failed to Save Sent Message

Hello,
While attempting to send a message out today, Mail failed to save the message to ANY respective folder therefore the message was lost. There is nothing in drafts, sent, or saved folders that indicate that the message was actually sent.
I use AOL mail in the client software. The settings usually work, but there have been occasions where this has happened before.
Any inclination as to what is causing this? Is there anyway to recover that email that took TWO hours to compose?
Thanks,
-J

Hi J:
Welcome to Apple discussions.
I had a very similar thing happens a few weeks ago. I attributed it to AOL (which I also use). In my case, I think the message was sent.
Recovery….. Do you use Time Machine? I looked in Time Machine when my message went missing, but the auto-save had not happened in the necessary time period so nothing was there. You could sign on to AOL on the web and see if the message is there someplace.
It is too late for you now, but if I am pecking out a longer E-mail (I type very slowly) I save a draft periodically. I started that after my experience above.
Barry

Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce

Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.

If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins.

Remote Desktop 3.6 fails to save sorting in client list view (on osx10.8)

Hi there,
i have sorted my controlled clients in the "all computers" section via the labels column to group them together by color.
this worked fine in older version of ard. now after upgrading from 3.5 the colors of the computers are preserved, but the column "labels" is disappearing after each restart of ard. and so the entries are always sorted alphabetically by name. I have noticed that the sorting does revert to that "standard" state
whatever the changes I make are. So I assume that ard fails to save the layout in com.apple.RemoteDesktop.plist. I have also removed com.apple.RemoteDesktop.plist from my preference folder to let it regenerate from ard, but the problem stays the same.
Has anyone filed a bugreport abut that behavior jet?
Tanks,
Ben

Hello!
Same problem here for me:
Some ARD clients behind a vpn-tunnel.
ARD admin cpmputer running 10.9.1 and ARD 3.7.1
There is no problem with clients running 10.6.8, 10.7.5 and 10.8.5 with ARD client 3.5.4, 3.7 and 3.7.1
But clients with 10.9.* and ARD client 3.7.* is it impossible to do remote control. It does not matter which color/quality mode i select. The mouse movement is extremly sluggish and lagging - it takes a few seconds until the mouse settles down - I need about 10 seconds to close a window.
Once again all clients are controlled via the same vpn tunnel from the same ARD admin-computer.
Apple has to fix it ASAP. We rely on reliable software products.
Bye,
Christoph

When trying to generate a docx RH8 fails to save the document and crashes

Hi all,
I am trying to generate a docx with RH8 under Win XP Pro Japanese localization, and shortly after the conversion starts, I begin getting warnings that RH "Failed to save the Word Document after appending a malformed topics:" and then gives the name of the topic. This is happening for all topics, though it generated fine previous to the last changes I did in the project.
The changes I did in the project were just additions of topics the usual way. No importing of any kind, just copy from Word and paste in RH8.
I suspect a RH corruption, however if I could avoid reinstalling RH, it would be awesome.
I just repaired Office 2007, as I was thinking that Word might be the problem, however the same thing happens, so my best guess would be reinstalling RH8.
Any ideas as what could be the problem?
Thank you,
Bogdan

I reinstalled RH8 and managed to generate the printed documentation normally.
So the problem was RH8 which got corrupted without any apparent reason.
Bogdan

Aperture 3: GPS data gets lost after 'Update from Master'

My library contains photos in JPEG format that I geotag in Places, then I save the metadata with 'Write IPTC Metadata to Master'. The problem I have is, that the GPS data gets lost after I do an 'Update from Master', even if I saved the metadata before. I'm having this problem with referenced and managed photos and all my JPEGs from several different cameras. The only way to permanently store the GPS info into my photos seems to be to export the geotagged photos as versions.
Does anybody has the same problem or knows how to solve this?
Thanks in advance,
Michael

Use Houdah geo (http://www.houdah.com) to write location data back to the EXIF. It's interface is very similar to Places (Google maps and pins) and you can interface with the Aperture library. It's a bit of a pain, but if you need it done now rather than wait for an Aperture 3 fix, then...
Also, see here: http://www.nickrains.com/index.php?option=com_content&view=article&id=65:apertur e-3&catid=12:news&Itemid=24

Failed to Save Document--Crystal Reports

Hello,
Is there a fix to a "Failed to Save" error that is currently happening to me?
After reviewing other threads, I believe the error happened when I went from a wired connection to a wireless connection when I removed my computer from my docking station.
Is there any fixes to this issue?
Crystal Reports--Version 14.1.1.1036
Thank you,
Kyle

I'd like you ot update to the latest Service Pack for CR 2013:
Downloads for SAP Crystal Reports and others
If that does not help, you may have to see what Process Monitor reports when you try to save the rpt.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow me on Twitter

Crystal Reports 2011 IDE fails to save active report

Hi,
I've been using CR 2011 to update some previous versions of CR. When I go to save the report 9 out of 10 times it fails to save the active report file and turns the report into a .tmp file. I then have to save the report back to a .rpt file and it is fine and the report still works. But this is driving me nuts. To have to keep on saving as after the IDE fails.
Anyone have any help/suggestions on this.
Thanks,
Jim

hi Jim,
are you using crystal reports for visual studio as the IDE? if so, please repost your question here.
if not (i.e. you are using crw32, the regular crystal reports designer tool), please ensure that you've got the latest sp installed from here. after that, if you still experience the problem please provide a link to one of your reports (e.g. in dropbox) with saved data so that it can be tested by someone else on their version of cr.
thanks,
jamie

Failed to save package list!

I am trying to add DM packages for my tasks in eData --> Organize Package List menu but after adding the package group and the DM package to the group, when I try to save it, i get an error message "Failed to save the list!" and the packages disappear. I have checked my profile and I do have the required authorization etc. Has anyone else seen this kind of error on BPC 7.0NW SP5. Any idea what might be going on?
Thanks.

Sorin,
thanks a ton for your efforts. I did try adding the package group and save it first before attempting to add the DM package. The problem is when you add the package group the message says that the package group is added successfully. Then when you try to add the package and save it
eData --> Add package group in ADMIN folder --> Message "Package group has been added successfully".
After this step I can see the package group iunder the Application folder
Next Add Package Package type Process Chains. I select /CPMB/LEGAL_CONSOLIDATION --> Give it a name say LC, in the same folder as the one created in previous step. Check the task type User Package and Admin Package --> Select. The selected package shows up in the respective folder. So far so good.
Next when I click Save --> "Failed to save package list!"
When I try to look under eData --> Organize package list --> all the folders are gone! (Even one from before that was, I believe defaul Data Management).
I check under eData --> Manager Tream User Package Access: I don't see anything.
I have the proper security in BPC security settings (DM etc.).
I am at wits end!

Failed to save plr: null

After updating to 10.3.3 I'm seeing the following errors every few minutes on both ZCM servers in loader-messages.log. Has anyone else seen this?
[DEBUG] [3/28/11 10:36:53 AM] [] [Loader.PatchAnalyzeReportingService] [] [Failed to save plr: null]
[DEBUG] [3/28/11 10:32:55 AM] [] [Loader.PatchAnalyzeReportingService] [] [!!!!! Exception: java.lang.NullPointerException

We have this issue too. Keeps coming back after we "fix" it. Had a call in with Novell for a few days, and no response. Going to ask them about Bug-685948. Thanks for the heads up.

Error with transform activity - failed to save XSL Map

I am trying to create a bpel process that gets files via ftp which consists and a set of data records. The plan is for the data to be inserted into a db staging table. Along the way I need to execute a transformation on the data to get it into a form that the staging table can use. Thus I was trying to execute a transform activity which would take the ftp source data which is a xml document with multiple records and then port it into the collection for insertion into the db table. However I find that when I try to save the transform after connecting the recs element to the for-each for the db elements I get a message from jdeveloper 10.1.3.4 "Failed to save XSL Map".
How to I transport the data and overcome this problem?
Thanks,
Steve

Hi,
I had faced similar kind of problem earlier. It was not a problem with transformation; it was problem with JDeveloper sessions. Before creating the XSL please check if you can able to connect the remote system from JDeveloper.

Hyperlinks from other placed indd documents or pdfs getting lost after export to PDF

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

after upgrade vom CS 5.5 to CS 6: hyperlinks from other placed indd documents or pdfs getting lost after export to PDF
I tried all options for the as well known and working export options

Annotations lost after failed cloud save

Similar Messages

Maybe you are looking for