Announcement:  Move recent snapshot build posted

We have posted a more recent interim build in the download areas for WLS 6.1 beta.
If you are interested in trying it out. Proceed to the actual download area by
selecting your platform on:
http://commerce.bea.com/downloads/weblogic_server.jsp
Login and continue to the download page where you select a server from which to
download. Below the the servers is a link:
"Download More Recent Pre-Released Builds"
This will take you to the download page with the more recent build.
If you encounter a problem, please refence the build filename in the email when
you post.
Thank you,
Lauren Wright
BEA Product Manager -- WLS

I found the Solaris build. Never mind. My fault.
Jim Zhou.
"Jim Zhou" <[email protected]> wrote:
I have an urgent need for a Solaris Interim Build. I am doing a major
performance prototyping using 6.1 beta and MQ Series, we want to prove
to
upper management that WebLogic can handle 1 million bank transactions
in a
certain time frame. We need the fix on "High Performance XML Parser".
I am
hoping this pre-release build fixed that problem.
Jim Zhou.
"Lauren Wright" <[email protected]> wrote in message
news:3b4e42e0$[email protected]..
We have posted a more recent interim build in the download areas forWLS
6.1 beta.
If you are interested in trying it out. Proceed to the actual downloadarea by
selecting your platform on:
http://commerce.bea.com/downloads/weblogic_server.jsp
Login and continue to the download page where you select a server fromwhich to
download. Below the the servers is a link:
"Download More Recent Pre-Released Builds"
This will take you to the download page with the more recent build.
If you encounter a problem, please refence the build filename in theemail
when
you post.
Thank you,
Lauren Wright
BEA Product Manager -- WLS

Similar Messages

  • Announcement:  More recent snapshot build posted

    We have posted a more recent interim build in the download areas for WLS 6.1 beta.
    If you are interested in trying it out. Proceed to the actual download area by
    selecting your platform on:
    http://commerce.bea.com/downloads/weblogic_server.jsp
    Login and continue to the download page where you select a server from which to
    download. Below the the servers is a link:
    "Download More Recent Pre-Released Builds"
    This will take you to the download page with the more recent build.
    If you encounter a problem, please refence the build filename in the email when
    you post.
    Thank you,
    Lauren Wright
    BEA Product Manager -- WLS

    I found the Solaris build. Never mind. My fault.
    Jim Zhou.
    "Jim Zhou" <[email protected]> wrote:
    I have an urgent need for a Solaris Interim Build. I am doing a major
    performance prototyping using 6.1 beta and MQ Series, we want to prove
    to
    upper management that WebLogic can handle 1 million bank transactions
    in a
    certain time frame. We need the fix on "High Performance XML Parser".
    I am
    hoping this pre-release build fixed that problem.
    Jim Zhou.
    "Lauren Wright" <[email protected]> wrote in message
    news:3b4e42e0$[email protected]..
    We have posted a more recent interim build in the download areas forWLS
    6.1 beta.
    If you are interested in trying it out. Proceed to the actual downloadarea by
    selecting your platform on:
    http://commerce.bea.com/downloads/weblogic_server.jsp
    Login and continue to the download page where you select a server fromwhich to
    download. Below the the servers is a link:
    "Download More Recent Pre-Released Builds"
    This will take you to the download page with the more recent build.
    If you encounter a problem, please refence the build filename in theemail
    when
    you post.
    Thank you,
    Lauren Wright
    BEA Product Manager -- WLS

  • Animated Gif/movie not following build order

    Animated Gif/movies do not build in proper order.
    For example, I have an animated clock that is suppose to come in as Build No 29
    and run. However, it loads as though it is Build item No 1.
    It does run at the proper time in the build.
    Must I hide it with color or other tricks. The problem is it shows immediately as the
    slide builds and looks hideous.

    Never-mind. I have it working properly now.

  • Error: LK047 Material movement could not be posted in the system via IDOC

    I am trying to create an article document (goods movement doc) for an already created purchase order.
    but this is via an IDOC (WMMBXY). after filling the data in WE19, i shoot the idoc in to the system. in we02 i get the following error message: LK047 Material movement could not be posted in the system . Can someone please help.
    the following fields are filled:
    Segment: E1MBXYH
    Document date        20091124
    Posting date         20091124
    Reference            9999999999
    Doc.Header Text      POS/1110
    Transaction code     MB01
    USNAM                user12
    Segment: E1MBXYI
    Processing ind.      1
    Material             832924
    Plant                1110
    Movement Type        101
    Debit/Credit     +
    Currency             EUR
    Qty in un.entry      250
    Unit of Entry        PAK
    Qty OPUn             90
    OrdPriceUnit         KG
    Purchasing Doc.      9100000141
    Item                 1
    Profit Center        11090
    G/L Account          22706
    Movement Type        101
    SLED/BBD             20091231

    Hello Shankar,
    Glad to hear from you!
    In your question, please make sure you use leading zeros for the MATNR field.  In header segment field E1MBXYH-BKTXT, we use header text. Hope you are using inbound posting function L_IDOC_INPUT_WMMBXY.
    Please try with this and it works for us.
    Thanks a lot,
    Venu

  • Create a subsequent Goods Movement for a transfer posting

    Hi Team,
    I have a scenario where the users will create a Good Movement document for transfer posting. The Stock of Material "A" is transferred to stock of Material "B" using the movement types 561 etc. Now the quantity is reduced from unrestricted stock of "A" and posted to "Stock in Transfer/Transit" of "B". The requirement is to create another Goods Movement document immediately after the above transfer posting is completed and use movement type 101 to post the same quantity to unrestricted of "B".
    I tried searching for use exits and could not find a relevant one "After Save" for goods movement online transaction. I found the MB_GOODS_MOVEMENT_UPDATE Badi but don't know how to create another goods movement document while in the update task. I'm concerned that if I call a BAPI or BDC inside the update task, it might conflict with the current transaction (transfer posting). Looking for your guidance.

    Hi Deepali,
    You can use the userexit ' ZXMCBU02 '  to write your own code. This user exit gets triggered for almost all the goods movement transaction.
    There is also a very similar BADI which you can use which gets triggered for every goods movement transaction.
    I would like to know the BADI feel free to let me know. I think the above user exit should server your purpose.
    Hope this is useful for you.
    Cheers
    VJ

  • Status 51 -- Error: LK047 Material movement could not be posted in the sys

    I am trying to create an article document (goods movement doc) for an already created purchase order.
    but this is via an IDOC (WMMBXY). after filling the data in WE19, i shoot the idoc in to the system. in we02 i get the following error message (status 51): LK047 Material movement could not be posted in the system . Can someone please help.
    the following fields are filled:
    Segment: E1MBXYH
    Document date 20091124
    Posting date 20091124
    Reference 9999999999
    Doc.Header Text POS/1110
    Transaction code MB01
    USNAM user12
    Segment: E1MBXYI
    Processing ind. 1
    Material 832924
    Plant 1110
    Movement Type 101
    Debit/Credit +
    Currency EUR
    Qty in un.entry 250
    Unit of Entry PAK
    Qty OPUn 90
    OrdPriceUnit KG
    Purchasing Doc. 9100000141
    Item 1
    Profit Center 11090
    G/L Account 22706
    Movement Type 101
    SLED/BBD 20091231

    Hello Shankar,
    Glad to hear from you!
    In your question, please make sure you use leading zeros for the MATNR field.  In header segment field E1MBXYH-BKTXT, we use header text. Hope you are using inbound posting function L_IDOC_INPUT_WMMBXY.
    Please try with this and it works for us.
    Thanks a lot,
    Venu

  • Movement type 453 (Transfer posting to own stock from returns from customer

    Hi all,
    I have problem in goods movement type 453 (Transfer posting to own stock from returns from customer)
    it picking from from profit center from in material master under  sales:general/plant tab   but we need picking from based on account assignment group  in the material maser sales org.2.
    Other movement types are picking from based on account assignment group only . for that what i can do please help me on this.
    K.Satish

    Hi,
    In Co controlling are the automatic account assignment is only the default and it on the Priority.
    if you think what is picked up from the mm is wrong.
    the best way out will be to go with the substitution  rule.
    based on the movement type use the rule.
    hope this is clear , assign points.
    With regards
    Krishna

  • Movement 415 Q- transfer posting project to project

    In case of movement 415 Q- transfer posting project to project, I want to change the accounting entries.
    As per the business need, it is decided that for some cases where excess stock is available in one project that can be transfered to other project without cost. Hence in some cases I need to cancel the accounting posting done by movement 415 (Q) so that only quanity is transfered to other project.
    Is this feasible with the help of development ?

    Hi,
    Whenever you procure materials against Project 'A', cost will be booked against the same project. If project is completed & still u've excess materials which u want to issue to some other project 'B', U can use std SAP movement type 415Q. By using this, cost which was already booked against project 'A' will be transferred to project 'B' to the extent of materials cost issued to project 'B'. Accounting documents represents the same.
    But your requirement is : excess stock of project 'A' should be transferred to project 'B' with out value flow. That means.... Cost will be still lying with project 'A'  for the excess materials issued to project 'B' though those materials are not consumed against project 'A'. And also the cost booked against project 'B' will be lesser than the actual spent. (bcoz these materials cost will not get added to project 'B' cost)
    Finally total cost of both project 'A' & 'B' will have wrong figures, which is not a correct practice.
    Thanks
    Kishore

  • HT1449 I can't move recently purchased music on iTunes into external hard drive

    I can't move recently purchased music on iTunes into external hard drive

    Intel Macs use a different partition table format (GUID) for booting. Otherwise, the PPC/APL tables should still let it mount etc unless there is a problem with LaCie or the FireWire ports.
    Does it have FW800/400 and USB2?
    Seems like LaCie isn't using the best cases or firmware or bridge.
    This is a D2 model? two drives bridged to appear as one volume?

  • I recently had a post removed--Please do not delete this post.

    I am appalled by my recent treatment by Apple's Support Community.  I recently had a post removed, and was sent a notification email about it, for calling someone a name.  I won't say it here, as Apple continually deletes my emails when I say it, even though I censor the word.  As "offensive" as it may have been, I was defending myself from what someone else said to me.  Yet the original "inflammatory" and "speculative" post that prompted my reply was not removed.  Their post was neither "polite" nor "constructive" as the etiquette standards say they require.  I feel this is unfair and a violation of Apple's Community Etiquette standards.  Who do I speak to about this, without being continually censored?

    I will report your post to the hosts for you - it will be up to them.
    If someone attacks me, I will usually just ignore it - that is the best way to deal with such people.

  • FRM-92101 on client machines after physical move to new building

    I'm relatively new to IAS (1.0.2.2.2a), Portal (3.0.9.8.5), Forms (6.0.8.25), etc. We recently moved most of our employees to a new building. The web server and DB server remains at the old location. External internet users continue to access the portal and Forms application successfully. Our Intranet users can access the portal. But after the Forms app URL is selected, the application login/mainmenu fails with FRM-92101: A failure has occurred on the server. You will need to reestablish your session.
    The java console display on my workstation:
    Forms Applet version is : 60825
    oracle.forms.net.ConnectionException: Forms session <1,102> aborted: unable to communicate with runtime process.
         at oracle.forms.net.ConnectionException.createConnectionException(Unknown Source)
         at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
         at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
         at oracle.forms.net.HTTPNStream.flush(Unknown Source)
         at java.io.DataOutputStream.flush(Unknown Source)
         at oracle.forms.net.StreamMessageWriter.run(Unknown Source)
    Anyone have any idea on how to begin chasing this down?

    Thanks for the response. I've worked several days with with my Network IT dept to resolve this issue. So far, they see nothing. They opened up the firewalls completely with negative results. Network tracing has revealed nothing. I discovered workstation DNS calls from the server didn't work any longer after the move to the new building. That has been resolved with no effect on the Forms call. I have increased all the recommended timeout parameters per Note 204446.1. No impact. My failure is immediate when calling the form from my portal. It's as if workstation sessions are being rejected by the the Forms servlet process or the network. Any ideas on what else to look at?

  • Scale does not work for the target movie when using a poster movie

    Hello,
    I have various size video files that I want to scale to a certain display area on a website. I'm using the scale="tofit" attribute. It works fine for the poster movie but when the target movie is loaded it does not scale! Is this a QT bug or by design? Is there a workaround to this or am I doing things wrong? All help is greatly appreciated.
    <object classid="clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B" width="489" height="280" codebase="http://www.apple.com/qtactivex/qtplugin.cab">
    <param name="autoplay" value="false">
    <param name="controller" value="true">
    <param name="href" value="heaven.mov">
    <param name="pluginspage" value="http://www.apple.com/quicktime/download/indext.html">
    <param name="target" value="myself">
    <param name="type" value="video/quicktime">
    <param name="src" value="movies/PosterTest.mov">
    <param name="scale" value="tofit" >
    <embed src="movies/PosterTest.mov" href="heaven.mov" width="489" height="280" autoplay="false" controller="true" border="0" pluginspage="http://www.apple.com/quicktime/download/indext.html" target="myself" type="video/quicktime" scale="tofit">
    </object>
    Dell inspiron 8200   Windows XP Pro  

    After quite a lot of Googling I found what I was looking for. This solution was quite hard to find. I found it on http://blog.deconcept.com/2005/01/26/web-standards-compliant-javascript-quicktim e-detect-and-embed (I'm using Geoff Stearns's script to embed my movies, it works great!)
    Anyway here is a url to the final solution:
    http://developer.apple.com/documentation/QuickTime/WhatsNewQT5/QT5NewChapt1/chap ter1_section32.html

  • Error in  BAPI_GOODSMVT_CREATE with movement type *261'  after posting

    Hi All,
    After sucessfull posting of  BAPI_GOODSMVT_CREATE  with movement type *261' .
    After posting ,while checking In mb51 document exists for it but checking in mmbe stock not reduced from resisticted stock.
    Can you kindly tell the import parameter to be filled to over come this error.
    Thank you.
    Thanks,
    AMS

    Hi Himanshu/ Tejaswini Khante / Madhu,
    Thank you all for your kind reply.
    @Himanshu....I have tried with LWA_ITEM-STCK_TYPE = BLANK, Still it didnt work.
    @Tejaswini Khante ...I checked the MMBE tcode, all the stocks are in 'Unrestricted use' only. The quality inspection, reserved fields are all blank. The materials are not Batch managed.
    @Madhu...Yes, i discussed with the Functional, yet to find a possible solution.
    Thanks & Regards
    Rajesh

  • Change the behavior for movement type 309 - Account post PRD

    Dear friends ,
    We need to transfer material to material using movement type 309.
    These material are using price control "S".
    When we transfer from material A to material B the price difference stay stopped in the PRD account.
    We need to revaluate the material B automatically and not let the price difference stopped in the PRD... when we run the Material Costs..via Material ledger.
    Does anyone knows a way to change this behavior ?
    best regards,
    Alessandro

    Dear Revi thanks for your answer !
    One more thing...
    We cannot change the valuation from S to V in the material B.
    Regarding the PRD postings... when the Controlling team runs the Material Ledger the price for material B should be changed/updated automatically, Am I right ?
    And then the PRD account must be cleared...
    Or I continue to do the MR22 manuall...or better... create an Abap program to run automatically clearing the PRD posting agains't the material via MR22 to correct the cost of this material.
    thanks once more.
    Ale

  • Using QT7 pro to convert.mov to MP4 to post to Vimeo, but movie comes out out of sync

    Just bought QT 7 Pro so i could convert a .mov I created in iMovie into a MP4 so i could post on Vimeo etc. Resulting video looks perfect but all a the music tracks and the audio portion of the video (which run perfectly as a .mov) are shifted about 5 seconds early.

    Did you check that the easy setup is matching properly with the audio/video settings of your material (once converted)?
    The audio file should be AIFF 16 bits, 48KHz if you chose one of the 48KHz easy setup. Have you tried exporting only the audio with those settings and see when applied to the timeline if rendering is still needed?
    Armando.

Maybe you are looking for