Announcement: Scheduled Maintenance: December 20th, 2013

I keep getting this out-of-date message. Is is phishing? The headers start thus: "
om: Apple Support Communities Updates <[email protected]>
Subject: [Apple Support Communities] Announcement: Scheduled Maintenance: December 20th, 2013 at 10:00PM PT
Date: 30 January 2014 19:51:22 GMT
Why would Apple be sending out an obsolete message?

That's a legitimate message which somehow had the wrong date attached. The correct date was yesterday; just ignore or delete it.
(99419)

Similar Messages

  • Why am I just now getting an announcement of scheduled maintenance from December 2013?

    Announcement: Scheduled Maintenance: December 20th, 2013 at 10:00PM PT
    updated by Matt K. in Apple Support Communities - View the announcement
    Apple Support Communities will be undergoing scheduled maintenance on December 20th, 2013 at 10:00PM PT.
    Beginning times:
    12/20/2013 - 10:00PM - Pacific
    12/20/2013 - 11:00PM - Mountain
    12/21/2013 - 12:00AM - Central
    12/21/2013 - 01:00AM - Eastern
    12/21/2013 - 06:00AM - London
    12/21/2013 - 07:00AM - Paris
    12/21/2013 - 10:00AM - Moscow
    12/21/2013 - 03:00PM - Tokyo
    Announcement expires on December 20, 2013
    I received this today jan 30 2014

    Afternoon, Deggie,
    D'you mind if I ask you a question?   Here in the UK I don't get e-mails advising of maintenance: I get, if I'm lucky enough to spot it, a band towards the top of the opening Communities page in the form of a general announcement.   Does one need to register somewhere to receive these e-mails.
    Looking at the questions this one raised perhaps I don't need them
    Thanks in advance if you can advise.

  • Scheduled Maintenance - Nov. 20th

    We will be conducting a scheduled maintenance on Nov. 20th at around 11:59pm PST for approximately 15 minutes.
    During this time, you may experience issues accessing the community.
    Thank you.

    That's a legitimate message which somehow had the wrong date attached. The correct date was yesterday; just ignore or delete it.
    (99419)

  • From: Apple-ID [mailto:Apple.International@Apple.id]  Sent: Wednesday, December 11, 2013 7:36 PM To: Deborah McKay Subject: Final step To verify your Apple      Dear Apple Customer,  Your Apple ID has been used to open a session iCloud from an unauthori

    From: Apple-ID [mailto:[email protected]]
    Sent: Wednesday, December 11, 2013 7:36 PM
    To: Deborah McKay
    Subject: Final step To verify your Apple
    Dear Apple Customer,
    Your Apple ID has been used to open a session iCloud from an unauthorized device..
    It's easy: Click the link Your iTunes account is now locked, please enter your account to verify your information. .
    Update Now >
    After you finished your account is confirmed, let us know immediately. Report, it is important because it helps us prevent fraudsters from stealing your information. Sincerely, apple.
    copyright 2013 Apple Inc. Please do not reply to this email because we are not monitoring this inbox. To get in touch with us, log in to your account and click "Contact Us" at the bottom of any page. Copyright © 2013 apple. All rights reserved. apple (Europe) S.à r.l. et Cie, S.C.A. Société en Commandite par Actions Registered office: 22-24 Boulev ard Royal, L-2449 Luxemburg RCS Luxemburg B 118 349 apple Email ID PP315.
    I just got this message and sent it to [email protected] per instructions on another post. the link leads to a page asking for Apple id and credit card information.

    I got a similar email. It's obviously Spam. The double period afetr the first sentence and the otherwise poor grammar are dead giveaways even before I checked out the link embedded. -- I didn't click on it, just hovered over it to get the url. And the return address was [email protected] Very bogus.

  • HT201359 I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    I had cancelled a auto withdrawal from a app I purchased months ago. The app is smule sing. I cancelled  the VIP on December 26,2013. Auto renewal was on 12/27/2013. On 1/7/2014 apple charged my account for this. How do I get my money back

    Use the Report a Problem link in the emailed receipt.

  • Scheduled Maintenance basic start and finish date

    Hi Expert,
    I'm using WO type say PM04 for schedule maintenance. In its maintenance plan i'm using prioity "medium" that starts form 7 - 14 days.I also have already set the scheduling type in OPU7 - adjust scheduling into "Do not adjust basic dates, dep. reqmts to order start"
    after run deadline monitoring WO PM04 that generated is resulted as per below:
    basic start date: 13.08.2010
    basic finish date: 13.08.2010
    the basic dates does not reflect the priority "medium"
    pls help how can i configure the basic dates setting that align to its priority.
    Thanks
    Rgds,

    Hi ,
    plz check if the below user exit is helpful or no
    IWO10012 :Maintenance Order: Priority Handling on Central Header
    i think priority does not influence the basic start or end dates for order generated from MP ..
    regrds
    pushpa

  • Get latest order for a scheduled maintenance plan

    Hi experts,
    I have a requirement where i have to get the order id for a scheduled Maintenance plan.My scenario is explained as below:
    A maintenace plan is scheduled and as a result of it an order will be created automatically  by system. Now i have to write a Report program which will be running daily and this report has to pick only those order which are NOT complete and these order will come from the above scheduled maintenance plan.
    Therefore i have to pick incomplete order based on scheduled maintenance plan.Any idea how to achieve this requirement?
    In case of any doubt please let me know.
    Regards,
    Abhishek

    Thanks for reply. But my requirement is a bit differen.
    I need a BAPI which can take Maintenance Plan as input and it can return the latest created incomplete order which is created due to scheduling of Maintenance Plan.
    Regards,
    Abhishek

  • August 2014 Scheduled Maintenance - Are Web and Worker Roles affected?

    Are Web and Worker Roles affected by the Scheduled Maintenance that will be performed on Aug 2, 2014?  The email that I received from Microsoft Azure states that it will affect VMs and Cloud Services and goes on to say how to keep your VMs available
    despite the maintenance by setting up Availability Sets for VMs, but does not mention a strategy for Web and Worker roles.
    What am I missing here?

    Hello Farid_Azure,
    Yes, the Web and Worker Roles are also affected by the scheduled maintenance as the web roles and worker roles are residing on the hardware that will go on maintenance.
    The Cloud Service deployments will also reboot during the maintenance. You can increase the number of instances running for your web roles and worker roles to avoid being affected:
    http://azure.microsoft.com/en-us/documentation/articles/cloud-services-how-to-scale/#manualscale
    I hope that this answers your question.
    Thanks,
    Syed Irfan Hussain

  • How do I schedule maintenance"

    How do I schedule maintenance? Or check to see if it's already performing that task

    What maintenance? There's no maintenance that you need to schedule.
    Kappy's Personal Suggestions for OS X Maintenance
    For disk repairs use Disk Utility.  For situations DU cannot handle the best third-party utilities are: Disk Warrior;  DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible. Drive Genius provides additional tools not found in Disk Warrior.  Versions 1.5.1 and later are Intel Mac compatible. An outstanding source of information is OS X Maintenance - MacAttorney.
    OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.)
    If you are using a pre-Leopard version of OS X, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep.  Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger.  (These utilities have limited or no functionality with Snow Leopard, Lion, or Mountain Lion and should not be installed.)
    OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
    I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
    For emergency repairs install the freeware utility Applejack.  If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line.  Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. (There is no confirmation that this version also works with Lion or later.)
    When you install any new system software or updates be sure to repair the hard drive and permissions beforehand. I also recommend booting into safe mode before doing system software updates.
    Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner.
      2. Data Backup
      3. Deja Vu
      4. SuperDuper!
      5. SyncTwoFolders
      6. Synk Pro
      7. Synk Standard
      8. Tri-Backup
    Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
    Always have a current backup before performing any system updates or upgrades.
    Additional suggestions will be found in:    
          1. Mac Maintenance Quick Assist,
          2. Mac OS X speed FAQ,
          3. Speeding up Macs,
          4. Macintosh OS X Routine Maintenance,
          5. Essential Mac Maintenance: Get set up,
          6. Essential Mac Maintenance: Rev up your routines,
          7. Maintaining OS X, 
          8. Five Mac maintenance myths,
          9. How to Speed up Macs, and
        10. Myths of required versus not required maintenance for Mac OS X.
    Referenced software can be found at CNet Downloads or MacUpdate.
    Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity or 20 GBs, whichever is greater, as free space.

  • Can´t apply December CU 2013 for SharePoint Server 2010

    Hi !
    I am trying to apply december CU 2013 in or SharePoint Server 2010 (SP2) Farm.
    1. I downloaded the december CU 2013 (KB 2849971)
    2. Installed it on every server in the farm. (No Problem)
    After the installation i was trying to run the Configuration Wizard on my first application server, but then it says that i missing the Hotfix 2849971 (Server1) that i newly installed. I tried to reboot the server, but the same
    happens again.
    Tried to install the CU again but then it says that th CU has nothing to apply. (Well i got i already)
    Anyone  who has any advice what i should do, i am stuck on this?
    //Matt 

    Run Get-SPProduct -Local on the problematic server, wait a few minutes, and then attempt to re-run the Config Wizard.
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • How to schedule Maintenance Mode in SCOM 2012?

    Hi
    How do I schedule Maintenance Mode in SCOM 2012? Do we have any tool for 2012 like we had with 2007?
    Regards,
    Akhilesh
    Thanks, Akhilesh

    Yep - to add a calendar takes some extra steps:
    E.g. 
    1) Create a database which includes a table to store information such as:
    - target for maintenance mode
    - scheduled time for maintenance mode
    - Comments
    - Duration
    - Reason
    2) The Service Request fires off an Orchestrator runbook that stores this information in the database
    3) Another Runbook that runs frequently that checks the database to see if it should kick off maintenance mode.
    It isn't any easy solution for maintenance mode. It works better for more simplistic scheduling e.g. we do implement this kind of logic for environment refreshes and backups where we use the SM Portal and Orchestrator to log a date and then have another
    runbook that runs at 2am every day to check if it should execute a backup \ refresh.  
    Cheers
    Graham
    Regards Graham New System Center 2012 Blog! -
    http://www.systemcentersolutions.co.uk
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • I am surprised to see that Remote Desktop Client update 3.7.1 been updated without my authorisation and creating now lot of problems from December 7, 2013, any one can tell, how?

    Remote Desktop Client update 3.7.1 has been updated without any permission and now creating umpteen number of problems since December 7, 2013. Now my gmail is empty and unable to see any email.  Most of the time my local host is: 92.242.132.27, I do not know why?
    Now I want to uninstall my update 3.7.1.
    I seek help to resolve my problem.
    Traceroute has started...
    traceroute to www.localhost.com (92.242.132.27), 64 hops max, 72 byte packets 1  192.168.1.1 (192.168.1.1)  1.554 ms  0.995 ms  0.972 ms 2  abts-tn-dynamic-001.0.164.122.airtelbroadband.in (122.164.0.1)  28.460 ms 3  abts-tn-static-093.227.95.61.airtelbroadband.in (61.95.227.93)  27.732 ms 4  61.95.240.129 (61.95.240.129)  27.433 ms  28.015 ms  27.758 ms
    5  59.145.7.133 (59.145.7.133)  187.777 ms  186.806 ms  236.866 ms 6  182.79.243.18 (182.79.243.18)  179.356 ms  179.188 ms  178.033 ms 7  182.79.248.234 (182.79.248.234)  178.512 ms  179.033 ms  179.084 ms 8  aes-static-029.37.144.59.airtel.in (59.144.37.29)  178.879 ms  177.540 ms 9  xe-0-0-0-0.edge00.thn.uk.hso-group.net (195.66.224.226)  177.235 ms  178.6
    10  xe-0-0-0.edge00.the.uk.hso-group.net (93.89.91.13)  177.571 ms  177.667 ms 11  ert1-the-gi1-8.router.uk.catalyst2.net (93.89.90.10)  187.420 ms  185.670 12  84.18.192.130 (84.18.192.130)  178.729 ms  178.521 ms  178.316 ms 13  * * *
    14  * * * 15  * * * 16  * * * 17  * * * 18  * * * 19  * * * 20  * * * 21  * * * 22  * * * 23  * * * 24  * * *

    Remote Desktop Client update 3.7.1 has been updated without any permission and now creating umpteen number of problems since December 7, 2013. Now my gmail is empty and unable to see any email.  Most of the time my local host is: 92.242.132.27, I do not know why?
    Now I want to uninstall my update 3.7.1.
    I seek help to resolve my problem.
    Traceroute has started...
    traceroute to www.localhost.com (92.242.132.27), 64 hops max, 72 byte packets 1  192.168.1.1 (192.168.1.1)  1.554 ms  0.995 ms  0.972 ms 2  abts-tn-dynamic-001.0.164.122.airtelbroadband.in (122.164.0.1)  28.460 ms 3  abts-tn-static-093.227.95.61.airtelbroadband.in (61.95.227.93)  27.732 ms 4  61.95.240.129 (61.95.240.129)  27.433 ms  28.015 ms  27.758 ms
    5  59.145.7.133 (59.145.7.133)  187.777 ms  186.806 ms  236.866 ms 6  182.79.243.18 (182.79.243.18)  179.356 ms  179.188 ms  178.033 ms 7  182.79.248.234 (182.79.248.234)  178.512 ms  179.033 ms  179.084 ms 8  aes-static-029.37.144.59.airtel.in (59.144.37.29)  178.879 ms  177.540 ms 9  xe-0-0-0-0.edge00.thn.uk.hso-group.net (195.66.224.226)  177.235 ms  178.6
    10  xe-0-0-0.edge00.the.uk.hso-group.net (93.89.91.13)  177.571 ms  177.667 ms 11  ert1-the-gi1-8.router.uk.catalyst2.net (93.89.90.10)  187.420 ms  185.670 12  84.18.192.130 (84.18.192.130)  178.729 ms  178.521 ms  178.316 ms 13  * * *
    14  * * * 15  * * * 16  * * * 17  * * * 18  * * * 19  * * * 20  * * * 21  * * * 22  * * * 23  * * * 24  * * *

  • PowerShell script doesn't appear to work as scheduled task in sharepoint 2013

    PowerShell script doesn't appear to work as scheduled task in sharepoint 2013, it works as normal manual execution
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi,
    To run PowerShell Script as scheduled task in SharePoint 2013, you can take the demo below for a try:
    http://blogs.technet.com/b/meamcs/archive/2013/02/23/sharepoint-2013-backup-with-powershell-and-task-scheduler-for-beginners.aspx
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
    contact [email protected]
    Patrick Liang
    TechNet Community Support

  • Dated December 14th, 2013... When are you coming up with your next version of Muse This one is just

    Dated December 14th, 2013... When is Adobe coming up with the next version of Muse?  This one is just stinks! It is full of unsolvable bugs! and eats at my time! I would rather have an old reliable version that pay monthly for something that might be usable in three months!

    Perhaps if you let us know what problem you're encountering?

  • Windows Scheduled Maintenance Task

    I want to disable or delete the Windows Scheduled Maintenance Task in windows 7 by GPO in my domain 2012, because it delete old shortcuts in desktop users, but this task isn't in the c:\windows\tasks path, and I can't found it in the registry. Any idea?

    > I want to disable or delete the Windows Scheduled Maintenance Task in
    > windows 7 by GPO in my domain 2012, because it delete old shortcuts in
    > desktop users, but this task isn't in the c:\windows\tasks path, and I
    > can't found it in the registry. Any idea?
    Run
    schtasks /change /tn microsoft\windows\diagnosis\scheduled /disable
    in a startup script.
    Martin
    Mal ein
    GUTES Buch über GPOs lesen?
    NO THEY ARE NOT EVIL, if you know what you are doing:
    Good or bad GPOs?
    And if IT bothers me - coke bottle design refreshment :))

Maybe you are looking for