Announcements do Not Drop Off Sharepoint 2010
I am using the announcements option and have an expiration date. The meeting drops off in the list but does not drop out of the webpart.
d.bell
That is fine. When you create a new view at your list level it does not automatically gets applied to your web part. You need to go to web part and explicitly select that view for the web part.
e.g. You created a view called "MSDNAnnouncements" and you removed the expiry column from that view and you also set filter where you set Expirty is greater than or equal to [TODAY]. You made this as your default view.
Now when you go to your list you will see all these in effect. When you go to your web part you will not see this given you need to update the view at your web part. Even if your web part is using the same view and you made change in the View you still need
to go to your web part and update the view.
Please let me know if any question.
Amit
Similar Messages
-
When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
When I connect my guitar using apogee jam the note drops off after a few seconds. Why???
Its the same on most of the preset amps.
Please help, the apogee cost me £80!Is it stopping recording after 8 seconds? Are you using Garage Band?
If both of these are correct:
This is actually a feature (i'm not sure why it defaults to this). Instructions for the iPhone version are below:
With the amp section open, touch the sproket on the upper right.
You should be in a "settings" type area with three tabs. Touch "Sections"
Select the section and switch it to automatic - it will now record until you stop recording by touching the stop icon. -
Hello all...
I have an issue from the user saying that the items are
not dropping off from her worklist.The item is a PO.
can any 1 please help me in this.
Thanks in advance.
Points rewardedwhat transaction is the user using to see the worklist?
If it is a custom transaction or custom program then may be the logic of program needs to be changed to avoid all POs for which GR has been done.
Standard transactions for POs show all follow on documents existing for a PO. to get the desired result we can filter our results. But in your case I guess its a custom transaction / report. -
Excel datasheet Password Protection not opening in Sharepoint 2010 default browser
Password protection Excel datasheet not opening in SharePoint 2010 library with Use the server default
(Open in the browser) I get a SharePoint Error ‘an unexpected error has occurred ’
If I change in advanced setting to Open in the client application it works fine
What do I need to do In order to have the file open in the default browser?Excel Services/Excel Web App does not support password protected Excel sheets. Your only option is to open in Excel client.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Error : file not found in SharePoint 2010
I have a problem of error "file not found" in a site collection SharePoint 2010.
I cannot access to home page, the page of list/library/permission,etc. All pages will appear an error "file not found"
I can access to the page of "all content"
I can access to the site setting page, but I cannot open the link on this page. For example, I select "quick launch" in "Look and feel" section, it will show an error "file not found".
I think I must reset my master page, but I cannot use SharePoint Designer (forbidden in my application), I cannot open the link on site setting page, and I cannot open library page to check the master page
I can access to mobile view, and all pages work well in mobile view, but I did not find site setting page
How could I check the master page? Or this problem has other solution?
Thank you in advance.You might have referred an image or style sheet or some file from an invalid path. Check the error in detail, where you might be able to know which file or file path is not correct. Then recorrect it in the master page and then refresh the site.
UPDATE - Can you configure the web.config to display the detailed error? Make -
<CustomErrors Mode="Off">, CallStack="true" and
<compilation debug="true" />
Do an IISReset and then refresh the site. -
Date parameter does not work in SharePoint 2010 report using SQL 2008 Server Reporting Service
Here is the settings:
SharePoint 2010 with SQL server 2008 reporting services configured
When create a report for a SP list using SQL server report builder (3.0) the date parameter does not work.
The data parameter is set as "date and time" type and field name equals the col name in the SP list
When run the report, the whatever dates I select, the result is always the same, so the parameters do not take any effect.
Is any step missing?
Thanks for any advice !Hi ,
How did you configure you "date and time" type parameter and field name equals the col name in the SP list?
Have you tested if other type parameter worked?
Have you tried typing the date format as 20140722 in your date parameter filed before run the report?
http://whitepages.unlimitedviz.com/2012/02/using-sharepoint-filters-with-reporting-services-parameters-for-personalized-reports/
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Daniel Yang
TechNet Community Support -
Alert to group not working on Sharepoint 2010!
Hello,
We have a SharePoint 2010 Server which on the front page we have a news list. We have migrated to 365 and since then the alerts are not working properly. We have a local SMTP server that we use to rely to 365 since SharePoint does not support TLS by itself.
The SMTP server is working because we can set up alerts on individuals and the emails are coming. The issue is with the group. I have tried several groups but still the same issue. On some groups we receive the initial email about the creation of the alert,
but no mails after that. I have checked also the Immediate Alert service and is successful. I have checked in the mail flow on 365 and I can see the initial creation of the alert mail sent to all in the group, but the alerts on changing anything on the
list does not come into 365, so it must be a SharePoint issue which I can`t determine since the immediate alert service is running...
Can you please provide a feasible solution for this issue?
Thank you very much.
DOVC
Best Regards, Valentin Doru System AdministratorHi Valentin,
please also open a thread at o365 community, because seems this issue happened at o365.
to try, perhaps you can re-add the group also, because it may refresh the properties from the AD group to o365.
and you may check these workaround for testing:
Option 1: Use a Redirection User
created a user in Office 365. This user is licensed to use SharePoint Online and Exchange Online.
In Exchange Online, create Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of organization, as the SharePoint Sender is not part of the Exchange Org.
In Exchange Online for the User Exchange Forwarder, created Inbox Rules. The rule is checking the Subject for a keyword and as action redirect the E-Mail to the DG and deletes it right away.
repeat this for other DGs as well.
In SharePoint Online grant the user Exchange Forwarder access to the Site to access the List
Now there are two important steps:
1) The Alert Title needs to include the token we look for in the Exchange rule
2) The “Send Alerts To” needs to be our “Exchange Forwarder”
When everything is set up an Alert will be received by Exchange Forwarder and then forwarded to the DG.
Option 2: Use a custom Workflow with the Send E-Mail To Activity
In Exchange Online creat a Distribution Groups, which are standard Distribution Group that allows however in Delivery Management also Senders outside of my organization, as the SharePoint Sender is not part of the Exchange Org.
Using SharePoint Designer create a custom Workflow like the one below. In the Send E-Mail activity I specified the external SMTP Address of the DG as To-Address.
When the Workflow is executed an E-Mail is sent directly to the DG:
Background:
When sending an Alert, SharePoint is doing a Security Trimming. So SharePoint wants to be sure the recipient of the Alert has permissions to see the List Content the Alert is about. Therefore we cannot enter an SMTP-Address for an Alert but need to specify
a Security Principal known to SharePoint.
In a Workflow we don’t need to do this kind of Security Trimming. The creator / designer of the Workflow need to take care whom to send what information.
Side note: Alerts and Workflow Send E-Mail To Activities are the only possibilities in SharePoint Online to send E-Mails. Custom solutions (Sandboxed Solutions) will not work.
Regards,
Aries
Microsoft Online Community Support
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Lync 2013 - Presence not showing in SharePoint 2010
Hello,
Presence was showing while on Lync 2010 and Office 2010 but at some point we lost the jellybean presence.
We recently upgraded to Lync 2013 and O365. Yet our SharePoint 2010 libraries are no longer showing the presence next to Modifiied By or Created By.
I've checked CA and presence is enabled. AcriveX add-in ia as well.
Thank you,
AndreaHi,
Did the Lync Server 2013 install On-Premises or online?
If it is On-Premises deployment, Presence is displayed by using an ActiveX® control and Lync APIs.
Please check if the Office to be the Latest version, if not, update it and test again.
If it is Lync online, you can also post a question on Office365 forum for assistance. Thank you for your understanding.
http://community.office365.com/en-us/forums/163/categories.aspx
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
AD Security Group name change not showing in Sharepoint 2010
Hi!
We have a Sharepoint 2010 Standard enviroment and are heading for a role-based identity-managment in our company. That's why we find it better to use AD Groups instead of Sharepoint Groups.
So we have over 1000 AD Security Groups groups that have been added to our Sharepoint Sites and our goal is to control every permission in Sharepoint from AD.
I have done all this with the combination of Excel and Powershell and it have worked great.
The problem i see in the long run is the name change of AD Security Groups. Sharepoint 2010 isn't showing the new name of the group.
Does anyone know of any workaround that can solve this problem. It's a bit of a disappointment that Microsoft haven't fixed this. The only information i think they should store in Sharepoint is the SID of the groups.
I was thinking of designing a powershell script that runs every night and updates the display name of the groups that do not match the AD display name.
Is there any other way?As far as I know, and I'm not sure where to go from here without testing on my own...and I'm not sure when I'll be able to do that. Perhaps a configuration issue.
Have you tried removing the incorrectly named group and adding in the correctly named one?
Read through this related post:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/49dc833f-4127-45ac-bd21-98b04d3632ef
Looks like that can help you. Let us know how things go.
Colorless Green Ideas Sleep Furiously http://www.sharepointnerd.com -
Archive feature is not working in sharepoint 2010 list
Hi
i configure archive feature for list. but it is not working. i followed below video <o:p></o:p>
http://www.youtube.com/watch?v=ZAkSEMW89Jw
but list items are not moving to archive list.
could any one help me how to resolve this?
<o:p></o:p>did you see if workflow started or not at all?
any error...as Amit asked...share the Workflow logic.
just keep in mind the steps in video are:
Save as template "current list"
then create new lis using above template.
now create a designer workflow on your main list which automatically start on item change.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
Document icons not visible in sharepoint 2010
Hi
I am working on sharepoint 2010. I have a site in which document icons are missing. Example: When going into View All Items -> Pages , the pages should be having "IE" icon to be displayed. Similarly for word , css files . All the icons
are showing as "X". I have checked the DOCICON.XML file to be correct (compared to file present in other server).
When trying to access the image directly eg: http:localhost:99/_layouts/images/ichtm.gif , i am able to access the image without issue.
When looking at the properties of the image, i could get the url as http:localhost:99/_layouts/images.
Please help me to resolve this issue.
Thanks in advance
UshaPlease confirm if you see URL as http:localhost:99/_layouts/images. or http//:localhost:99/_layouts/images.
Is it same behavior on all sites or just 1 site
What do we see in Fiddler traces
Did you made any changes in DOCICON.XML
or some where else
If this helped you resolve your issue, please mark it Answered -
Pdf stamping (water mark) functionality is not working in sharepoint 2010
Hi
I have developed custom handler(.dll) for pdf file stamping functionality using Ihttphandler in VS2010 with help of
iTextSharp. deployed the hanlder in GAC and referred hanlder in handler section of the web.config file one of the
Sharepoitin 2010 site. the stamping functionality is working fine when I am using <Mapping Key="pdf" Value="pdf16.gif"
OpenControl = "Malag.OpenDocuments"/> mapping key for PDFs in DOCICON.XML. after doing all this settings when open any pdf
from sharepoint site it opens in the browser with stamping (water mark) on each page of pdf file. Now i want open the file
in Adobe Reader X with check out & check in options. i have changed mapping key for PDFs in DOCICON.XML file to <Mapping
Key="pdf" Value="pdf16.gif" OpenControl = "PdfFile.OpenDocuments"/>. After changing when click on pdf file in site it opens
adobe reader X prompting Chewck out & open etc.. option, if i select Open option the PDF file is not opening & showing
message "There was an error opening this document. File open failed". Please let me know solution how to solve this issue.
Here is my handler code..
using System.IO;
using System.Web;
using Microsoft.SharePoint;
using iTextSharp.text;
using iTextSharp.text.pdf;
using System.Configuration;
using System;
using Microsoft.SharePoint.Administration;
namespace WSPPDFStamping
class WSPPDFStampingHtppHandler:IHttpHandler
public bool IsReusable
get
return false;
public void ProcessRequest(HttpContext context)
var siteId = SPContext.Current.Site.ID;
var sec = new SPSecurity.CodeToRunElevated(delegate()
using (var site = new SPSite(siteId))
using (var web = site.OpenWeb())
SPFile file = SPContext.Current.Web.GetFile(context.Request.Url.ToString());
string RequestedURL = context.Request.Url.ToString();
// string connStringUrl = "";
string connStringUrl = "";;
bool isAdd = true;
byte[] content = file.OpenBinary();
SPUser currentUser = SPContext.Current.Web.CurrentUser;
string siteWebAppRoot = "/" + SPContext.Current.Site.WebApplication.DisplayName;
System.Configuration.Configuration rootWebConfig =
System.Web.Configuration.WebConfigurationManager.OpenWebConfiguration(siteWebAppRoot);
System.Configuration.ConnectionStringSettings connString;
if (0 < rootWebConfig.ConnectionStrings.ConnectionStrings.Count)
//connString =
// rootWebConfig.ConnectionStrings.ConnectionStrings["PDFStampingURL"];
//if (null != connString)
// connStringUrl = connString.ConnectionString.ToString();
for (int i = 0; i < rootWebConfig.ConnectionStrings.ConnectionStrings.Count; i++)
string connStr = "PDFStampingURL" + (i + 1);
connString =
rootWebConfig.ConnectionStrings.ConnectionStrings[connStr];
if (null != connString)
connStringUrl = connString.ConnectionString.ToString();
if (RequestedURL.Contains(connStringUrl))
isAdd = true;
break;
else
isAdd = false;
//if (!RequestedURL.Contains(connStringUrl))
if (!isAdd)
context.Response.ContentType = "application/pdf";
context.Response.BinaryWrite(content);
// context.Response.AddHeader("content-disposition", "attachment; filename=" + file.Name);
// context.Response.AddHeader("content-disposition", "inline;filename=" + file.Name);
context.Response.End();
isAdd = false;
return;
string watermark = null;
if (currentUser != null)
watermark = "Document downloaded by " + currentUser.Name + " on " + System.DateTime.Now + " PST.";
if (watermark != null)
PdfReader pdfReader = new PdfReader(content);
using (MemoryStream outputStream = new MemoryStream())
PdfStamper pdfStamper = new PdfStamper(pdfReader, outputStream);
BaseFont baseFont = BaseFont.CreateFont(BaseFont.HELVETICA_BOLD, BaseFont.CP1252, false);
for (int pageIndex = 1; pageIndex <= pdfReader.NumberOfPages; pageIndex++)
//Rectangle class in iText represent geometric representation...
//in this case, rectangle object would contain page geometry
iTextSharp.text.Rectangle pageRectangle = pdfReader.GetPageSizeWithRotation(pageIndex);
//PdfContentByte object contains graphics and text content of page returned by PdfStamper
PdfContentByte pdfData = pdfStamper.GetOverContent(pageIndex);
//create font size for watermark
pdfData.SetFontAndSize(BaseFont.CreateFont(BaseFont.HELVETICA_BOLD, BaseFont.CP1252, BaseFont.NOT_EMBEDDED), 8);
//create new graphics state and assign opacity
PdfGState graphicsState = new PdfGState();
graphicsState.FillOpacity = 0.7F;//= 0.4F;
//set graphics state to PdfContentByte
pdfData.SetGState(graphicsState);
//indicates start of writing of text
pdfData.BeginText();
//show text as per position and rotation
pdfData.ShowTextAligned(Element.ALIGN_MIDDLE, watermark, pageRectangle.Width / 4, pageRectangle.Height / 44, 0);
//pdfData.ShowTextAligned(Element.ALIGN_CENTER, "For Internal Use Only", pageRectangle.Width / 2, pageRectangle.Height / 2, 45);
//call endText to invalid font set
pdfData.EndText();
//Top text
PdfGState graphicsStateTop = new PdfGState();
graphicsStateTop.FillOpacity = 0.005F;//= 0.4F;
//set graphics state to PdfContentByte
pdfData.SetGState(graphicsStateTop);
pdfData.BeginText();
//pdfData.ShowTextAlignedKerned(Element.ALIGN_LEFT, "TEXT Left", 150, 628, 0);
pdfData.ShowTextAligned(Element.ALIGN_CENTER, watermark, pageRectangle.Width / 2, pageRectangle.Height - 13, 0);
//call endText to invalid font set
pdfData.EndText();
//Set 45 degree water mark
PdfGState graphicsState45 = new PdfGState();
pdfData.SetFontAndSize(baseFont, 38);
graphicsState45.FillOpacity = 0.07F;//= 0.4F;
//set graphics state to PdfContentByte
pdfData.SetGState(graphicsState45);
pdfData.BeginText();
//show text as per position and rotation
pdfData.ShowTextAligned(Element.ALIGN_CENTER, "Registered For Internal Use Only", pageRectangle.Width / 2, pageRectangle.Height / 2, 45);
//pdfData.ShowTextAlignedKerned(Element.ALIGN_LEFT, "TEXT Left", 150, 628, 0);
//call endText to invalid font set
pdfData.EndText();
pdfStamper.Close();
content = outputStream.ToArray();
context.Response.ContentType = "application/pdf";
context.Response.BinaryWrite(content);
// context.Response.AddHeader("content-disposition", "attachment; filename=" + file.Name);
// context.Response.AddHeader("content-disposition", "inline;filename=" + file.Name);
context.Response.End();
SPSecurity.RunWithElevatedPrivileges(sec);
web.config file of share point site
<handlers>
<add name="PDFWatermark" verb="*" path="*.pdf" preCondition="integratedMode"
type="WSPPDFStamping.WSPPDFStampingHtppHandler, WSPPDFStamping, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=835cc3a26d74a89a" />
</handlers>
thanks in advance.
jampani venkateshwar rao.Time to engage in basic debugging. Alter your script to remove all the extra steps and generate logs as it goes along, then gradually re-enable each part so you can work out where it's bombing out. It doesn't sound like a problem with Reader itself, and as Claudio says we're not here to provide support for non-Adobe software.
-
Alert set through timer job is not working in sharepoint 2010 as expected
Hi,
I create the standard sharepoint alerts through timer job.
in my timer job, i loop through a list and based on the user value in the alert to field i create alert for the users and the condition for the alert are only when new items are created and something changes in the below view.
all the properties are set fine. Email triggered on new items additions and on specific daily or weekly summary.
The view filteration is not working at all:(
But after the timer job ran and set the alert, if i open the alert settings on UI and without changing anything if i click ok , then the view filteration is happening and alerts are working fine.
What is wrong here? is it a bug or anything am missing?
Aruna
try
SPList Configlist = web.Lists.TryGetList("Configuration");
foreach (SPListItem oItem in Configlist.Items)
ProfilePicker = oItem["ProfilePicker"].ToString();
ProfileViewer = oItem["ProfileViewer"].ToString();
string MIS = oItem["MIS"].ToString();
SPList list = web.Lists.TryGetList(ProfileViewer);
SPList ProfileList = web.Lists[ProfilePicker];
foreach (SPListItem oItem in ProfileList.Items)
frequency = oItem["Frequenzy"].ToString();
created = (DateTime)oItem["Created"];
string createdDate = created.ToString();
createdDate = DateTime.Parse(createdDate).ToShortDateString();
DateTime today = DateTime.Today.Date;
string dateonly = today.ToString(); ;
dateonly = DateTime.Parse(dateonly).ToShortDateString();
SPFieldUserValue fieldValue = null;
SPFieldUser UserColumn = (SPFieldUser)oItem.Fields.GetField("Alert_x0020_owner");
fieldValue = UserColumn.GetFieldValue(oItem["Alert_x0020_owner"].ToString()) as SPFieldUserValue;
if (fieldValue != null)
alertowner = fieldValue.User;
alert = alertowner.ToString();
//if (createdDate == dateonly)
SPUser user = web.EnsureUser(alert);
SPAlert newAlert = user.Alerts.Add();
newAlert.AlertType = SPAlertType.List;
newAlert.List = list;
newAlert.DeliveryChannels = SPAlertDeliveryChannels.Email;
newAlert.EventType = SPEventType.Add;
if (frequency == "Daily")
createDailyAlert(newAlert, list, user);
else
createWeeklyAlert(newAlert, list, user);
catch (Exception ex)
// Danfoss.Sharepoint.Logger.DanfossLogger.LogToOperations(ex, "Exception occurred in setting the profile alert", 0, EventSeverity.Error, DanfossExceptionCategory.General);
private static void createDailyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My Daily Profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Daily;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Daily Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Daily Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Daily")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
private static void createWeeklyAlert(SPAlert newAlert, SPList list, SPUser user)
newAlert.Title = "My weekly profile viewer Alert";
newAlert.AlertFrequency = SPAlertFrequency.Weekly;
newAlert.AlertTemplate = list.AlertTemplate;
newAlert.AlertTime = new DateTime(DateTime.Today.Year, DateTime.Today.Month, DateTime.Today.Day, 10, 0, 0);
newAlert.AlertTime = newAlert.AlertTime.AddDays(0);
SPAlert existingAlert = null;
newAlert.Properties.Add("filterindex", "4");
newAlert.Properties.Add("viewid", list.Views["Weekly Alert"].ID.ToString("D"));
newAlert.Properties.Add("filterpath", string.Format("{0}/", list.Views["Weekly Alert"].ServerRelativeUrl.TrimStart('/')));
foreach (SPAlert alerts in user.Alerts)
string al = alerts.AlertFrequency.ToString();
// Filter down the alert to the list you wish to report on.
if (al == "Weekly")
// Found your existing your custom alert. Don't create one.
existingAlert = alerts;
if (existingAlert == null)
newAlert.Update(false);
This is my code. alerts are not sending based on the view:(Hi sathyaav,
I followed the example and made a test in my environment, it works like a charm.
I suggest you check if you have inputed the valid site URL when you create the project solution.
If you deployed succeed in the Central Administrator Site using Visual Studio, then the job named "Simple Job Definition" will appear in the job definition list.
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support -
Lync Status Not Updating in Sharepoint 2010 with IE 11
After migrating a few users to windows 8.1 with IE 11, Office 2013 these users cannot see their or other lync users status indicator in SharePoint. In most paces the indicator doesn't even show up clear (Vs red, yellow green etc.).
On the My site the indicator is clear but if you hover it shows the call, im video call window and status is displayed.
The site is a trusted site so active X controls are running.
What in IE 11 is preventing this from working?Hi NWCC ,
the Lync 2013 Windows client maintains a local cache of the address book and they can get in a state that causes a variety of issues with the Contact List in the Lync 2013 client. In my experience the Presence
for some contacts shows as Unknown or Offline, however it can also cause some Contacts to go missing from the contact list, and to not display their Presence in Outlook.
The resolution is simple enough – delete the SIP profile directory and restart the client. The SIP profile folder is located here:
%UserProfile%\AppData\Local\Microsoft\Office\15.0\Lync
Deleting this SIP profile folder will trigger a complete address book download at a random interval in the next hour from when the client is restarted.
Reference:
http://blog.insidelync.com/2013/09/lync-2013-presence-issues/
http://blogs.technet.com/b/nexthop/archive/2013/09/24/script-to-delete-sip-profile-for-multiple-lync-2013-users.aspx
http://support.microsoft.com/kb/2813701/en-us
Best Regards,
Eric
Eric Tao
TechNet Community Support -
PDF content not searchable from Sharepoint 2010 Sever tried every thing
I have checked many blogs and tried many option i am unable to search the pdf content using Adobe filter
(1)i have installed the adobe filter from
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4025
(2)set the envoirment variable in the control panel to the bin directory of ifilter on the server
(3)Download
PDF icon picture (17x17) from Adobe web site http://www.adobe.com/misc/linking.html and Copy to
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\IMAGES\
Backup the docicon.xml file, and Add an entry in docicon.xml for the PDF icon:
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML
<Mapping Key="pdf" Value="pdficon17.gif">
(4)Add PDF file type on the File Type page under Search Service
(5)added the followng registry
\\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\14.0\Search\Setup\Filters
"Extension"="pdf"
"FileTypeBucket"=dword:00000001
"MimeTypes"="application/pdf"
\\HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Office Server\14.0\Search\Setup\ContentIndexCommon\Filters\Extension
added .pdf and set the below value
{E8978DA6-047F-4E3D-9C78-CDBE46041603}
(6)Stop and start the search service using below
Net Stop OSearch14
Net Start OSearch14
(7) restart the server
(8)reset the index
(9) run the full crawl
still i am unable to search the PDF content from Sharepoint search
can any one help in this i will be thankful
regards
MCTS,ITILHello Shahid,
Your question has been quite clearly answered here http://social.technet.microsoft.com/Forums/sharepoint/en-US/126076e8-7511-44cc-9c59-ce8cdd534758/sharepoint-foundation-2010-ocr-help?forum=sharepointgeneralprevious
If you are looking for an OCR solution that will allow you to use the full-text search without having to dive into all the technicalities of it, maybe Udocx is something for you (see Udocx.com). It allows you to upload documents from your MFP and desktop
directly into SharePoint folders including OCR and metadata.
Cheers,
Iris
Maybe you are looking for
-
Bluetooth ports added and unchangeable after os 10.8.5 update
Anyone have any ideas? I just updated my system software and now my bluetooth preferences are showing 2 new serial ports (modem) that I can NOT erase. Everytime I try, they keep on returning within in an hour or on reboot. On top of that, the box tha
-
Why do I have the same photos in two "albums" after sync?
After upgrading my 3GS to iOS5 this evening (and fixing all the other issues that came along), I have noticed that after syncing with the photo folder I keep on my PC that those same photos now have two albums in my photos app. Can anyone explain th
-
Hi all, we are running several T5 servers with LDOMs, using latest version of Oracle VM server for SPARC. One of the servers, the control domain, refuses to accept SSH logins and the console via the SP is not accessible. The LDOMs running under this
-
Aftet the closing all tabs of site "vkontakte.ru" still remains sound of alert for new incoming messages. Helps get rid of this only reopening browser.
-
Credit Memo for Service items that are returned
Hey Friends, I'm trying to create credit memo for a service item that is returned. I sold one laptop with one year extended warranty and now I want to RMA both the laptop and extended warranty. What are the setups to create credit memo - when I do th