Annoying Airplay notice on Apple TV screen saver

How can I eliminate the Airplay notice on my Apple TV screen saver?

Welcome to the Apple Community.
Settings > AirPlay > Conference Room Display > Off.

Similar Messages

  • What are the names of the flowers on Apple TV screen saver?

    what are the names of the flowers on Apple TV screen saver?
    I am looking for the the botanical names...
    Would anyone know where to find the credits for the photos used on the flowers screen saver?
    -carol8ne

    You can stream from a Mac via itunes selection (iPhoto events or a folder) - it has 8GB of solid state temporary storage, but quite how things are cached/flushed from here is a bit of a mystery - you cannot say designate 2GB to hold photos or prioritise photos over other material.
    Even rentals seem to flush if you've watched them and they haven't expired - relative fell asleep during a rental yesterday so i suggested she watched it today and it downloaded from scratch again, and the AppleTV hadn't had anything but music playing in the interim. Silly this really. There's a post on another section where someone used 17GB of their data allowance to watch a HD movie as it kept reloading!
    Yes you can stream photos from iPod/iPad using Airplay, but to be honest i don't think ATV2 offers that much over ATV1 for photos (yet anyway), and in some ways it's inferior.
    ATV2 is far more responsive/uses less power etc but I'm not convinced you get anything groundbeaking unless you have a lot of guests who could use it via Airplay from their iphones (and with ipads currently without cameras, photos would have to come from somewhere else in the first place).
    Message was edited by: Alley_Cat

  • I figured out how to put photos onto the Apple TV Screen-Saver

    I was having trouble using photos with the Apple TV screen saver.
    I got as far as putting them into the photo stream, but some photos were crooked, with no way of editing them.
    I called Apple, they didn't know what to do.
    I am submitting this after calling Tech Support at Apple, wanting to give them the information...don't know if they really took it to heart.  I figured this out myself with the help of my son.
    I want to share it with others.
    So, let me begin:
    I texted my son, he had set it up once for me, but I deleted the file. 
    So he told me to edit the photos on my iPhone, in my photostream.  Well there wasn't any to edit.  The file was not there.
    So going through my PC, I clicked on "My Computer" 
    I clicked onto "iCloud Photos"
    I get what looks like the above photo.  Click on "New photo stream"
    You will then get this screen.  In the "to" field, send it to yourself.  And then name your file, click "next".
    It will then give you this screen:
    When all the photos load, click done.
    THEN, go to your Apple TV. 
    Settings:
    Click on "Screen Saver"
    Click on "Photos"
    Click on "iCloud Photos"
    Click on the file you named on your PC.
    Now you will find, like me on "previewing" that some pictures were not straight.
    Go to your iPhone, click on your "Camera Roll"
    Click on "Photo Stream"
    Then you will see your file that you created for your screen saver.
    Click onto your file, from there you can click on the crooked photo and click "Edit", it asks to save it to "Camera Roll".  Click there. 
    What I did then was delete the crooked picture and at the bottom of this file within your "Photo Stream", go to the bottom of the photos, it will have a tile with a plus sign in it.  Click on that to add from your "Camera Roll" the corrected picture. 
    Do this for every crooked photo.
    ALL DONE!
    When done, go to your "Camera Roll" and delete these photos.

    This issue is resolved, through the generous advice of folks on this page.
    See my reply to Apple (2nd gen.) photo shuffle.  The Fix that I posted works for Apple 3 Gen, which was just purchased Dec. 27,2013.
    Thanks to all

  • I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

    I have been taking photos for years and have thousands.  When I use Apple TV screen saver, it seems only to grab a handfull and repeats them.  Is there a configuration setting that will allow me to have the screen saver grab more than just a few?  Thanks.

    The device has an 8GB drive for caching streamed meida, a small portion of that is used to temporarily store photos for the screensaver. It may vary depending on resolution etc but it seems to be around 100.

  • How do you choose which photos from Aperture for Apple TV screen saver?

    How do you choose which photos from Aperture for Apple TV screen saver?

    How do you choose which photos from Aperture for Apple TV screen saver?

  • Annoying: Mail app opens randomly after screen saver login

    Hi
    I have my security settings setup so that everytime my iMac goes into screen saver mode it asks for login password. Recently I have noticed that if I leave the computer unattended for a long period of time (a few hours) and come back, the mail app opens up. If I just go away for a few minutes and come back the problem does not occur.
    Since I am not using the mail app and have not set it up, the setup account window is the one to come up.
    I have checked the Login Items under Accounts in System Preferences and it's not there. I have also right clicked the icon in the dock and checked if it was set to start up automatically - it isn't.
    I have read online this maybe has something to do with email alerts from iCal but I have not set up iCal to send email, nor do I know where I can disable that type of feature. This is happening even when iCal is closed and I have no events for that day. I've looked around in the prefrences of iCal and disabled any option that has something to do with email but it still happens.
    The next logical step was to check Activity Monitor to try and see what started a process. You see I am originally a Windows user and have recently converted my OS religion. Back in Windows when something like this happened I had many tools that could tell me what started the application and even it's command line. But with the Mac all i have is the activity monitor and I'm still not familiar. I have clicked the process and then inspect, the parent process indicated launchd, pressing that lead me to another inspector window still without much info.
    How can I solve this, it is becoming rather annoying?
    Also does anyone know a better process monitor for mac? or how to use top on the terminal to get the information I need?
    Please help a confused new mac user!
    Thanks

    So I've tried both of the tips you gave my guys, but non of them works
    But I've found out something. When I switch to different space (in spaces), than drop some file and then try to switch back to my mail space, there are 2 possibilities how to do it. First - I just move mouse to the space to where I want to switch, wait for a second and it switch automatically or I can move mouse to the space where I want to switch and than press spacebar to make it faster.
    The strange thing with opening app from dock happens just when I press the spacebar.
    And question for your other answer - yes, it happens just with apps in my dock.
    It is so uncomfortable...
    EDIT: few days ago I've run OnyX (which was probably mistake) and this happens probably since than. I used it because Snow Leopard got little bit slower so I wanted to clean it... It might be because of that.
    Message was edited by: jakudo

  • Apple tv screen saver

    Is there a way to play music through Apple Tv without a screen saver showing on the TV. I would like a perfectly blank TV screen while playing music.

    Will someone from Apple PLEASE respond and let us know what is causing these slow downloads? Is it that your pipe is getting hit too hard? Are you working on it? I have over $600 invested in Apple TVs, and it starting to get embarrassing to purchase movies that aren't available to watch for hours afterward. It's not my broadband connection, as all other downloads are normal, and the Apple downloads are the only ones taking so long.

  • How do I get  my photos to present like the Apple TV screen saver presents its photos?

    I would like to have my Ipad picture albums present on my Apple TV like the factory screen saver pictures that the Apple TV presents. Any ideas how to do that?

    You need to go into the settings and set the screensaver to show your photos. Make sure you have shared photos via iTunes (File - home sharing - choose photos to share). iTunes needs to be up and running so it can cache the photos on ATV flash drive. FYI: It only uses a small portion (typically around 100)

  • Is there any way to see a Flickr group in the Apple TV screen saver

    I can easily add an individual but there MUST be a way to add a group. The Flickr URL just changes from /photos/***** to /groups/****.
    Any ideas?

    Hi there
    Try clicking Project > Rescale and scaling the project to be a smaller size.
    Note that you probably want to leave the "Maintain aspect ratio" option selected (you are welcome Lilybiri )
    Additionally, note that rescaling will inevitably result in a loss of fidelity. Things just begin to fuzzy up when you do that. The degree to which it suffers is in direct proportion to how much scaling you wish to do.
    As a final note, you only really want to ever rescale a project once. So if you aren't sure about the final outcome, click File > Save As and rescale. Look at it. LIke it? Terrific! Keep it! Don't like it so much? Scrap it and open the original again. Then again click File > Save As...
    Rinse and repeat as necessary... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • I wish to remove the black airplay window that appears on my Apple TV screen when the screen saver is playing.

    I find the black Airplay information window that appeared on my apple tv screen after the last update,  very annoying. It appears when the screen saver is playing and moves arround as the screen saver changes, can anyone please help me in removing it.

    Turn off the conference room setting in the Airplay settings

  • HT200112 how do u get rid of airplay box set up on apple tv when screen saver is  on

    How do u remove airplay set up box when screen saver is on when watching apple tv ?

    I just found an answer to my question yea
    go to settings on your apple tv...airplay...turn conference off.. & it works!!

  • I Can't Get Apple Hot News RSS Screen Saver!

    I can't get Apple RSS screen saver! All I can get is the Wikipedia Recent Changes one and I DON'T CARE ABOUT THAT!!!!! Please help me get the Apple screen saver back like I used to have.

    I get the "Wikipedia Recent Changes (en)" screen saver instead of the Apple one.
    And when I click options, this happens:
    Now I would like some help with this if you can.

  • How can I change my screen saver on Apple TV?

    I would like to change the pictures that pop up on my apple tv screen saver when I am listening to music.  How can I do this?

    Welcome to the Apple Community.
    Go to your screensaver settings and choose another source for your screensaver photos.

  • Apple TV displays a limited number of pictures in screen saver mode

    Why does Apple TV screen saver function show only a fraction of the photos that I have selected for my screensaver? It shows about 15 of 526 photos. If I use the slide show function it shows all photos. If I switch the screen saver to another directory I have the same problem. I've seen other people complain about the issue but haven't seen a resolution.

    Thank you LarryHN.
    After some further research ist seems as if tumblr ist bringing back 20 results by default. It is something limited by the rss software. Therefore not an issue for iPhoto.
    I contacted tumblr support.
    JJ

  • Where to after the screen saver...

    I was checking out an apple tv for purchase at an apple store, and I couldn't get an answer about this from anyone working there.
    I noticed that once the screen saver was going while playing music, any button pressed, for example to pause the music, would exit the screen saver and automatically return to the main menu.
    So, I would go to some playlist, start it, wait two minutes for the screen saver to kick on, then press pause to see what song was playing, and I was back at the main menu! I don't want to go back to the main menu!
    Is there some option or does it only do that with store display models (it was running some kind of apple promotional video as a screen saver), or is that just the way it works?

    Thank you very much for you're response. However, I see that I didn't make myself very clear. I'll try again.
    Of course, I want it to exit the screen saver when I press a button, but it when it exits the screen saver, I want it to be in the same place I was when the screen saver went on.
    For instance, if I was in a playlist, when it exits the screen saver, I still want to be in the playlist. As it is now, when it exits the screen saver, it returns back to the main (top level) menu.
    So, if I'm listening to a playlist, or an album, and the screensaver is going, I have to go through all the menus again to return back to the playlist?

Maybe you are looking for

  • Why Writing a File Cost Such a Memory?

    As a test case I tried the next code on my Mac OS X 10.2.3: import java.io.*; public class WriteZero {           public static void main(String[] args) throws Exception{ java.io.BufferedOutputStream bs = new java.io.BufferedOutputStream(new FileOutpu

  • Regarding Line item of MIRO

    Hi all, I am preparing "ENTRY TAX" report. In that report , for one of the columns i have to fetch "POTEXT" field in MIRO transaction. I am not getting in which table  that value will get stored. I did SQL trace too. If anyone could help me, i shall

  • Error deploying configuration

    Hello, We are experiencing "Error -: AIP-18510: Error adding objects to configuration test_cfg for business process cm_all_agreements" while trying to deploy configuration. All trading partnes are valid, agreement is approved. We could deploy success

  • Patch Level Updation

    Hi Friends,                   Due to some emergency we are updating patch level in development server from level 9 to level24 .  After making changes in development  if some changes done to PI objects & transport is done to production will that effec

  • Virtual Storage Error Count report large number

    Hi, I've win 2012 std with hyperv role on it. i've setup a virtual machine with 1 IDE disk and 1 SCSI disk all VHD on local disk. when i monitor the server with veeam one it report that the Virtual Storage Error Count in large (9) on the SCSI driver