Annoying inconsistent behaviour

On many edit pages, there is a Apply Changes button and Next (>) and Previous (<) buttons
On some pages, the next/previous buttons apply changes to the current page and then go the next/previous page.
On some pages, clicking the next/previous button pops up a Javascript box 'Are you sure you want to lose your changes?' without giving me an option to Save and continue.
On some pages, it silently discards my changes and moves to the next/previous page!
Can this please be fixed so the behaviour is intuitive and consistent?
Thanks

1. The Process edit page (4000:4312). If I make changes to my process code and click the 'Next' button, it silently discards my changes
2. Item edit page (4000:4311) This has a good interface. The next/previous buttons apply changes and then go to the next/previous page
3. I cant remember now which page pops up the Javascript box. But there is definitely a page in the App Builder which does this.
Thanks

Similar Messages

  • ECC 6.0 VERSION UPGRADE - INCONSISTENCY BEHAVIOUR -MM - Reg

    Hai,
    We are in the process of ECC 6.O upgrade from ECC 5.0,
    we started the CT1/ CT2 testing and found the following error.
    While inwarding Material against Subcontracting purchase order / S.L.Agreement ,
    The system shows the error message of CHALLEN MATERIAL IS DIFFRENT FROM MATERIAL DOCUMENT , during GR
    note :- for the same material , same p.o , some times systems allows for GR & some times gives above error message.
    if i try with some other login , the behaviourseems to be same as my login
    Can anyone tell this why this inconsistency behaviour of system during GR for sub contracting item..
    Regards,
    Suresh.P

    go to SE38,  here type the program RM07CUFA,
    click on execute... type ur mov type 541... here make the purchase order field from display to optional..
               this will effected for new subcontracting scenerio....

  • Inconsistent Behaviour on executing Xquery on the container....

    I need some of the suggestions on the following BDB issue. Here I written the code to create the container, load the .xml file in to it with doc_id and opens the allready existing container. Here I am seeing inconsistent behaviour.
    Following are the Steps I followed...
    1. Created DbEnv class object .
    2. Opened the DbEnv using open methode with flags "DB_CREATE | DB_INIT_MPOOL".
    3. Created XmlManager class object with the flags "DBXML_ADOPT_DBENV | DBXML_ALLOW_AUTO_OPEN".
    Rest of the steps are mentioned in the code fragment..
    Class Definition is as follows...
    #include <dbxml/DbXml.hpp>
    using namespace DbXml;
    using namespace std;
    class BDBObject // Singleton class
    public:
    static BDBObject* instance();
    bool open_xml();
    bool close_xml();
    bool execute_xquery(const string & exp, string & response);
    ~BDBObject();
    private:
    BDBObject();
    static BDBObject* m_singletonObject;
    XmlManager *m_xmlManager;
    DbEnv *m_bdbEnv;
    XmlUpdateContext m_xmlUpdateContext;
    XmlQueryContext m_xmlQcontext;
    XmlContainer m_necbContainer;
    XmlContainer m_necbXmlContainer;
    bool BDBObject::open(bool flagEnabled)
    -------------- < code fragment for first 3 steps mentioned above> -----------------
    try{
    string containerName = "container1.dbxml";
    if(m_xmlManager -> existsContainer(containerName))
    [b]m_necbContainer = m_xmlManager -> openContainer(containerName); // Opening allready existing container
    else
    return false;
    if(flagEnabled)
    XmlUpdateContext updateContext = m_xmlManager -> createUpdateContext();
    m_necbXmlContainer = m_xmlManager -> createContainer("container2.dbxml");
    XmlInputStream *fileStream = m_xmlManager -> createLocalFileInputStream(filePath);
    m_necbXmlContainer.putDocument(fileDocId, fileStream, updateContext, 0);
    }// End of Try block...
    catch (XmlException &xe)
    cout<<"XmlException: "<<xe.what()<<endl;
    return false;
    return true;
    }// End of function
    bool BDBObject::execute_Xquery(const string & sExp, string & response);
    if(NULL == m_xmlManager)
    return false;
    XmlContainer *bdbContainer = NULL;
    if(flagEnabled)
    bdbContainer = &m_necbXmlContainer;
    else
    bdbContainer = &m_necbContainer;
    if(bdbContainer == NULL)
    return false;
    try{
    XmlQueryContext xmlQcontext = m_xmlManager->createQueryContext();
    string containerName = bdbContainer -> getName();
    m_xmlQcontext.setDefaultCollection(containerName);
    XmlQueryExpression xmlQExp;
    if(flagEnabled)
    xmlQExp = m_xmlManager -> prepare(sExp, xmlQcontext);
    XmlResults bdbResult = xmlQExp.execute(xmlQcontext);
    XmlValue bdbValue;
    while(bdbResult.next(bdbValue))
    response = response + bdbValue.asString();
    }// End of Try block..
    catch (XmlException &xe)
    cout<<" XML Exception: "<<xe.what()<<endl;
    return false;
    return true;
    }// End of function
    <---------------- Application ----------------->
    main()
    cout<< "In Application "<<endl;
    bool flagEnabled = false;
    BDBObject *obj = BDBObject::instance(); // Singleton Object Creation
    obj -> open(false);
    string xquery("");
    if(flagEnabled)
    xquery = "declare namespace HHP=\"HHP\";
    let $n := doc('container1.dbxml/<corressponding docId>')//HHP:hapCageTable
    return ($n);"
    else
    xquery = "declare namespace HHP=\"HHP\";
    let $n := doc('container2.dbxml/<corressponding docId>')//HHP:hapCageTable
    return ($n);"
    string response;
    obj -> execute_xquery(xquery, response);
    ---------- END -------
    Here when I make flagEnabled as false in the application & then compiled.. After execution of the application, I had got expected output.
    Use cases which i tested the application in sequence are...
    1. I make flagEnabled as false in the application & then compiled.. After execution of the application, I had got expected output.
    2. I make flagEnabled as true in the application & then compiled... After execution of the application, I had got expected output.
    3. I make flagEnabled as false in the application & then compiled... After execution of the application, I had got exception in the BDBObject::execute_xquery() function at the line "xmlQExp = m_xmlManager -> prepare(sExp, xmlQcontext);" and shows the exception as "Error: No such file or directory".
    4. If I execute once again the previous use case, then it works.
    5. Now I re-executed the use case 2, I had got expected output.
    6. Now I re-executed the use case 1, Here I am able to see the execption in BDBObject::open function at line "m_necbContainer = m_xmlManager -> openContainer(containerName);" and shows the exception as "Error: container1.dbxml: container file not found, or not a container".
    Please let me know some suggestions to proceed further on this issue..
    Thanks in Advance,
    Regards,
    Sravan.

    Sorry let me explain it clearly.....
    Input plain xml file:
    <bookstore>
    <book>
    <title>ALSB</tile>
    <price>100</price>
    </book>
    </bookstore>
    As we know $body points to root element of above input xml file
    1) My xpath/Xquery condition is --> data($body/book/price)>30 than I validated and tested with above xml input it returns true to me so I saved and activated my proxy.
    2) Now next step let me test proxy from proxy test screen for above input xml file, I clicked on test icon and inputted above xml file. But myxpath/Xquery condition in proxy fails and it goes to else condition.
    The strange part is, if I change my input file to
    <book>
    <title>ALSB</tile>
    <price>100</price>
    </book>
    Than above condition return true, why this is behaving like this
    Edited by prabhu_biradar at 11/18/2007 8:26 PM
    Edited by prabhu_biradar at 11/19/2007 6:10 AM

  • Annoying window behaviour when dragging

    Often when dragging a window aside it jumps and stack on top of the most left top window (or so). It seems this happens when dragging a window on top of another window's title but not always. When it does happen it can be reproduced several times in a row but sometimes it doesn't happen at all, hence this behavior is inconsistent. It is also application independent.
    Is it possible to get rid of this behaviour?

    At least on Windows this depends on the OS setting, and not a JVM setting (at least I'm not aware of a setting which controls window dragging, I only know of one which affects window resizing)
    Thomas

  • Point4D.Multiply inconsistent behaviour with NaN values

    I've noticed some peculiar behaviour with System.Windows.Media.Media3D.Point4d.Mutiply when used with NaN values.
    The following assumes that I expect that 0 * NaN should result in 0. There is an argument against that logic, but that is not the point here.
    I have a 4x4 matrix defined, in the case that it is an Identity matrix and there is a NaN component in the vector, I would like to get some defined vector output where it is possible to calculate the component.
    E.g. (1,2,NaN,4) * (Identity Matrix) = (1,2,NaN,4).
    I was caught out for a while:
    By stepping through using the debugger gives the output I want (1,2,NaN,4).
    But allowing the debug code to run through uninterrupted gives the result (NaN, NaN, Nan, Nan).
    There is a slightly surprising workaround: - using Matrix.IsIdentity seems to trigger the result I want
    If I use the default Matrix constructor instead of a manually created one (normally created elsewhere in code), there is no problem.
    Can anyone explain this inconsistency?
    Simple C# console demo:
    using System;
    using System.Windows.Media.Media3D;
    namespace TestNan
    class Program
    static void Main(string[] args)
    Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
    Matrix3D testMatrix = new Matrix3D(1.0, 0.0, 0.0, 0.0,
    0.0, 1.0, 0.0, 0.0,
    0.0, 0.0, 1.0, 0.0,
    0.0, 0.0, 0.0, 1.0);
    var testResult1 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult1.ToString());// NaN,NaN,NaN,NaN
    var b = testMatrix.IsIdentity;
    var testResult2 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
    Console.ReadKey();

    >>Can anyone explain this inconsistency?
    The Matrix3D class has an internal boolean flag that it uses to determine if the matrix is actually an identity matrix and this flag is not set when you create a Matrix3D object using the constructor that takes the 16 double values despite the fact that
    you are actually creating an identity matrix (the flag is then eventually set when you access the IsIdentity property).
    If you use the Matrix3D.Identity static property, the flag will get set to the correct value immediately and the results will be the expected:
    static void Main(string[] args)
    Point4D testPoint = new Point4D(1.0, 2.0, Double.NaN, 4.0);
    Matrix3D testMatrix = Matrix3D.Identity;
    var testResult1 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult1.ToString());
    var b = testMatrix.IsIdentity;
    var testResult2 = Point4D.Multiply(testPoint, testMatrix);
    Console.WriteLine(testResult2.ToString());// 1, 2, NaN, 4
    Console.ReadKey();
    Hope that helps.
    Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question. Please don't post several questions in the same thread.

  • SSRS PDF report inconsistent behaviour

    Hi,
    We are using SSRS reports in out project. In one of the reports we are facing a weird behaviour of PDF report. The report has few legends at the start and then the table containing the data starts. 
    If the report has 25-28 records then the table starts from Page 2 instead of Page1. The corresponding HTML report is working fine.
    If the report has less then 25 records, table starts correctly from Page 1.
    If the reports has more than 30 records, then also the table starts correctly from Page1 and remaining records at Page2.
    Does anybody has idea why PDF reports starts displaying the table from Page 2?

    PDF reports in SSRS are generated with physical dimensions of the page and HTML are generated as logical. So if any of the rows in your first page or header is wider than a A4 size paper then part of the row will be moved to the next page. Keeping
    this in mind can you recheck the issue. The fact about 30 rows being on one page and 25-30 rows being moved to another might just be a conincidence. Maybe one of the records in the 25-30 set is wider than the other records. Could you please recheck and confirm?

  • Inconsistent behaviour in Java 1.2 and 1.3 version

    Hi Where can I find the complete list of methods and classes which are not depricated but have different behaviour in Java1.2 and 1.3 version, like one method is nextToken(String) of StringTokenizer class.

    Thing like this are likely to be found in the release notes for each version. The release notes of 1.3 are @ http://java.sun.com/j2se/1.3/relnotes.html

  • DBMS_RANDOM inconsistent behaviour ?

    Hi:
    I have an issue with DBMS_RANDOM on 9.2.0.6
    #### TEST CASE #####
    create table t1 (col1 number);
    insert into t1 values ('1');
    insert into t1 values ('2');
    insert into t1 values ('3');
    -- ## QUERY1
    select rnd1, rnd1, col1 from (select * from (select dbms_random.string('U',5)
    rnd1,col1 from t1));
    RND1  RND1  COL1
    <font color="#cc0000">EVJMP CZGSY</font> 1        <- the two occurrences of RND are different
    WHZTP TEJBP 2
    HOMYO DQVKG 3
    -- ## QUERY2
    select rnd1, rnd1, col1 from (select * from (select dbms_random.string('U',5)
    rnd1,col1 from t1 where rownum < 99));
    RND1  RND1  COL1
    <font color="#0000cc">DGMSG DGMSG</font> 1        <- the two occurrences of RND are equal
    MUEFU MUEFU 2
    UAKLH UAKLH 3
    ##########<br>
    I believe that query1 behaves wrong, I cannot reference the random value... while I believe query2 is correct.<br>
    My goal is to have multiple occurrences of rnd1 field share the same value, without applying filtering with rownum.<br>
    Is this the intended behaviour?<br>
    Any idea on how to make query1 behave as query2?

    Very odd this is what you select returns on 9.2.0.6
    SQL> select * from (select * from  (select dbms_random.string('U',5)
      2  rnd1,dbms_random.string('U',5)rnd2, col1 from t1  where rownum < 99))
      3  /
    RND1       RND2            COL1
    AOPLL      DHRHE              1
    XPACR      ADOUK              2
    YIKOZ      SERFB              3
    And when I use
    SQL> select rnd1, rnd1, col1
    2 from (select rownum as Rnum,dbms_random.string('U',5) rnd1, col1 from t1)
    3 /
    RND1       RND1            COL1
    CGXNN      CGXNN              1
    IYWMM      IYWMM              2
    GDTCT      GDTCT              3
    GJPLM      GJPLM              4
    JHXCO      JHXCO              5
    null                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Inconsistent behaviour of Sybase SQL anywhere update column trigger

    Hi, all
    I am not sure where to post this issue, since I could not find a forum for Sybase SQL anywhere.
    The problem is as follows:
    The definition of the update column trigger in help is this:
    UPDATE OF column-list
    Invokes the trigger whenever a row of the associated table is updated such
    that a column in the column-list is
    modified.
    However, there are cases when the triggers are launched even when the columns are not modified (ie the same exact value is in the both OLD and NEW row)
    This happens on BEFORE triggers, never saw it happening on AFTER.
    Ways to replicate the problem:
    1. Define a before trigger, which fires on update of a specific column in any table.
    2. Run an sql which says "update table1 set column1 = column1 where ... "
    3. You will see that trigger fires, even though it is not supposed to.
    Is this an expected behaviour on "BEFORE" triggers?
    Arcady

    If this were a sql server question, then I could tell you that this is by design.  A trigger will be executed regardless of the number of rows affected (including zero) and regardless of whether any column in any of the affected rows was changed.  I will also point out that PB was designed to work within this design by the inclusion of the [where clause for update/delete] option in the update properties of the datawindow.  The idea is that you avoid actual row updates (in the table) where nothing has actually changed (and it also supports collision avoidance).
    Based on the history, I would assume that Sybase works exactly the same.

  • SAP Screen Personas 3.0 - Inconsistent behaviours and features after installation

    Hi,
    Our company installed SAP Screen Presonas 3.0. We followed up Personas installation OSS notes and instalaltion check list.
    The Personas Health Check displays no issue (see below).
    However, we do get inconsistent behaviors from Personas 3.0:
    - Assign background button, Stretch button, Upload button don't work
    - Unassign image isn't possible
    - Fill color button and Bold icon don't work with a theme assigned to the transaction
    - Images and buttons aren't aligned when a flavor is displayed (compared to when a flavor is edited)
    - the link to personas via Chrome through https doens't work any more (after update of kernel at patch 22).
    Do you have any idea ?
    Thanks,
    Christophe
    Service Status
    personas
    ICF Name
    PERSONAS
    personas
    Compression
    ON
    personas
    Active
    YES
    personas
    Path
    /default_host/sap/bc/personas
    personas
    Text
    SAP Screen Personas 3.0                                             
      Preconfigured SAP GUI for HTML with SAP Screen Personas 3.
    personas3
    ICF Name
    PERSONAS3
    personas3
    Compression
    ON
    personas3
    Active
    YES
    personas3
    Path
    /default_host/sap/bc/personas3
    personas3
    Text
    /PERSONAS/CL_MIME_ZIP_HANDLER
    webgui
    ICF Name
    WEBGUI
    webgui
    Compression
    ON
    webgui
    Active
    YES
    webgui
    Path
    /default_host/sap/bc/gui/sap/its/webgui
    webgui
    Text
    SAP GUI for HTML
    System Status
    em/global_area_MB
    Current Value
    410
    Global Memory (em/global_area_MB) Left
    Current Value
    151.70
    zcsa/second_language
    Current Value
    E
    ztta/diag_area
    Current Value
    250000
    Personas3
    Version
    Version: 3.0-SNAPSHOT Build time: 2014-09-15 22:31:08
    PERSONAS
    Level
    0
    PERSONAS
    Package
    Kernel
    kernel release
    742
    Kernel
    kernel patch level
    22

    Some of those, particularly the image issues, are familiar. Others not - I've never had issues with Chrome, for example. Does https work in other browsers? That would be very strange. Not working in all browsers sounds like a kernel installation issue.
    There's a newer kernel now - pl24 was released just a day or two ago. There should be a new Personas client note tomorrow. I suggest applying both of those to see if any of your issues go away. If not, ask here again, but also create OSS messages for them to make sure they don't get lost.
    Steve.

  • Inconsistent behaviour playing FLV videos in Captivate 4

    Hi everyone,
    this is driving me absolutely batty!
    I have created a captivate 4 module which has some short (2-3 minute) flv videos on some of the slides.
    In "preview project" it all works fine. When published it worked fine on my computer. I then put it on shared drive on our network and sent an email around the office for people to check it.
    Annoyingly some people couldn't view it.
    we've got about 10 computers in the office, a bit of a mix of Windows Vista and Windows XP but everyone's got I.E. 7 or I.E. 8
    some of the computers play the FLV videos fine.
    some of the computer just show a blank slide.
    one of the computers gives a security warning.
    It's so frustrating, I've tried playing with all the browser security settings and the flash "settings manager" thing but nothing works.
    I find it really poor that this is so difficult to get to work on standard installs of Windows and IE. Isn't the sales pitch that "anyone can create eLearning EASILY and quickly!". well, not if the features don't work on every 2nd computer
    anyone come across this before? or have any ideas?
    Thanks heaps!
    Gaspar

    Hi there
    Captivate relies on the Flash Player/Add In.
    Each of the computers may have a different version of the Flash Player installed. Have you double-checked the Flash Player/Add In version? Maybe that's the answer. To upgrade the Flash.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Annoying inconsistent udev/HAL/dbus external USB HDD detection...

    Hello!  I am a newbie to ARCH.  When I first installed it, my USB drive almost always was detected AND auto-mounted upon booting into GNOME.  It was beautiful.  This shows that I have DBUS/HAL and all that nice stuff installed. 
    After a while, I decided to update my daemons as below.  (i added portmap and fam --- that is all!)
    DAEMONS=(syslog-ng network portmap fam dbus hal netfs crond alsa openntpd gdm)
    Anyway... now the USB external drive is never automatically detected or mounted, period.  I have to boot into GNOME, THEN unplug the USB cable... wait a bit... plug it back in.  Then it is detected.  Then I have to manually do:
    mount /dev/sda5 /media/usb
    mount /dev/sda6 /media/usb
    to mount them.  This is very annoying. 
    Is there anyway to get consistent detection and auto-mounting behavior???  It was working fine the first few times.  No idea where I went wrong, friends.
    btw... i am in the proper groups for my user too, though that is irrelevant because if i wasn't, it would still show up, just give me a security msg preventing mounting - GROUPS = disk wheel ftp dbus hal network video audio optical storage camera power users pacman
    Last edited by darweth (2007-04-07 13:42:39)

    Well, I eventually discovered the necessity of gnome-volume-manager and all is fine now.   No more help needed.  Weird that the behavior was bipolar w/o it though.

  • Inconsistent behaviour of the response

    Hi Everyone,
    We have a very weird problem here. Our application is a servlet based app using iPlanet Enterprise 4.0 application server. The servlet response acts very inconsistent when we try to change the response type from text/html to something else in the application(to res.setContentType("application/vnd.ms-excel") for example). Sometimes it works but most of the time instead of opening results in MS Excel, output is being rendered as an HTML.
    Does anyone have any suggestions?
    Any help will be greatly appreciated.
    Thanks,
    YM

    First of all I am setting the response type by
    calling
    res.setResponseType("application/vnd.ms-excel");Then I call some classes to query the database and
    return the ResultSet, which I then pass to the
    formatting classes to create an HTML page and write
    the ResultSet in the form of an HTML table inside the
    page. After that's been done, I get PrintWriter out
    of the response and writing the page by calling
    PrintWriter out = res.getWriter();
    out.print(formatted_HTML_page);
    Sorry, I meant res.setContentType

  • Storage Standby Inconsistent Behaviour (hdparm -S)

    Well hi folks, I have a bunch of ata/sata drives.
    -M acoustic      = not supported
    -B APM_level      = not supported
    -k  DIO_GET_KEEPSETTINGS failed: Inappropriate ioctl for device
    If i apply -S 60 (5 min) it works out very well.
    But any value higher than 120 won't spin down the drives at all.
    Apparently i'd like to set 240 (20 min). 60 is too low.
    I've tried hdparm -K 1 as well as smartctl -s off --offlineaouto=off --saveauto=on
    With mounted partitions or not. With systemd oneshot unit or
    the udev rule mentioned in the wiki. Fstab commit=600 or 1200.
    Or should i apply these commands in any specific order?
    On top of that, i have a feeling they used to work with -S 120.
    But on a random basis. Totally arbitrary behaviour.
    I use hddtemp /dev/sd? to check the state.
    Still i can't pin point the reason why. At this point it seems incomprehensible to me.
    Where should i look next?
    Last edited by Xelvet (2014-05-16 12:46:37)

    Now there's been some development. If i leave the freshly booted sys alone,
    standby performs as expected, apparently.
    I have some reasons to beleive all this mess caused by that mf Wine.
    winecfg alone wakes up all standby storages immediately for no f reason.
    i do use wine all the time for my charting platform.
    but this doesn't explain why the hdd standby is being prevented.
    Last edited by Xelvet (2014-06-05 19:52:03)

  • Default Value in Formula Variable - Inconsistent behaviour

    Hi,
    I am facing a very strange issue in a formula variable.
    I had created three formula variables with default values and the user (Power user who has the Bex access) was able to change the default value themselves for two of these variables.
    Now he wants to change all the three, so I have tried to check the issue and changed all the three for testing purpose.
    Now, he is unable to change any of them!!! Sad, now I cant even say that "You dont have the Auth to do so"
    Any clue? Anyone has faced similar issue.
    Any thoughts are highy welcome! Suddenly users wants to get this one URGENTLY, usually he used to access the report once in month. Now he wants to use the same once in half an hour
    We are on BI 7.0 with SP 24
    Any thoughts PLS
    Regards

    hi,
       probably you can refer to SAP Note 1413030 - SAPBWNews NW 7.x BW Add-On Frontend Patch 1300 - GUI 7.10 or maybe  SAP Note 1294382 - SAPBINews NW7.0  BI Add-On Frontend SP900 - GUI 7.1 that might help you in sorting out your problem, plus you can buy more time from the user as well
    regards
    laksh

Maybe you are looking for

  • No recognition of internal hard drive, USB, RAM DIMM1

    Hi folks, HOPING you can help me.  I fear that I've suffered a logic board failure on my 2011 15" MBP.  I bought an external blu-ray drive from Amazon, hoping to rip my blu-ray collection to my network-shared home server (a Windows 7 desktop PC, in c

  • Need help With saved photo's from online.

    Everytime i save a picture that i find while browsing the internet on my phone it says " Saved To Photo Library". Im new to Iphone and i cant find the picture in my photos on my iphone or anywhere.

  • How to use select max and min query..

    hi gurus, we have got a custom report for develoment. the report has to fetch the max and min salarys department wise.... how to pick up max & min sal ansal from table pa0008.

  • Need help on remote printing info for custom PDF form...

    Hi, I did quite a lot of search on this requirement but failed to access the correct info in this forum. In case anyone has already done this, please do explain and point to the right link. thanks I have a custom table where I will maintain every cus

  • Batch command for using Java in IE

    Hello, I'm looking for a batch command that sets IE to use Java (Sun). It should do the same job as if manually checking the check box of 'Use <java version> for applet' in advanced internet options of IE. Is there a way to do it?