Annoying messages while printing

I bought an HP printer. I choose to use off-brand ink cartridges. Why do I have to be harassed by a popup message every time I print reminding me that I am not using HP cartridges? I am aware of the risks of damage, etc. but I have made my free choice because HP's cartridges are too expensive. I can't support HP's profit center in this instance. How do I turn off these harassing messages? If i can't, then this printer (PHOTOSMART 7520) is probaby the last HP product I will ever purchase.
This question was solved.
View Solution.

What operating system? It may help to turn off bidirectional communication. In Windows 7 you would click Start, Devices and Printers, right click on the printer, Printer properties, Ports, uncheck the "Enable bidirectional support", Apply, OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

Error message while printing sales order

The following message was displayed while trying to print a sales order from a particular computer. Logging in on another computer with the same credentials worked fine. any thoughts?
Error in file Temp (bea4fc21-346f-4d31-93d6-8260b04be0a4)-(B002A516-3EB2-47FF-BAE7-3941126D5257).rpt:
Error in formula Record Selection:
‘(OCTG.GroupNum) = (?Pm=OQUT.GroupNum)’
This field name is not known
Details: errorKind

Hi,
Similar error found with different layout. Check SAP note,
1830583 - Error message pops up when printing or previewing
marketing documents with items managed by batches via CR layouts
Thanks & Regards,
Nagarajan

Event ID : 372 Print Service message while printing on Windows 8

I get meaningless error message on Windows 8 after every application print job with HP Laserjet P1606dn. The Win 8 popup error msg says "Error Printing on HP Laserjet Professional...The Printer Couldn't Print .....". The corresponding Event Manager error is:
"Event 372, Print Service
The document Print Document, owned by Mark, failed to print on printer HP LaserJet Professional P1606dn. Try to print the document again, or restart the print spooler.
Data type: RAW. Size of the spool file in bytes: 312352. Number of bytes printed: 312352. Total number of pages in the document: 1. Number of pages printed: 0. Client computer: \\DELLW. Win32 error code returned by the print processor: 0. The operation completed successfully."
The print job then prints perfectly.
Historically, my Event Viewer shows these errors in clusters. This cluster began on 8/25/2013, the same day I replaced my network router with a Frontier Netgear Model B90-755044-15 Rev 3. I assigned a new static IP address to the printer after the router replacement, and uninstalled / reinstalled the printer on each machine so they would recognize the new IP address. I also updated the printer's firmware from version datecode 20120130 to 20130703 at that time (in retrospect, I should never have updated firmware on same day as the network changes). Errors have appeared ever since. Updating the software driver version from 20100406 to 20120926 today did not fix the problem.
The previous Event 372 cluster was limited to a single day, 2/9/2013. I don't see any obvious print-related errors on 2/9 except about ten 372s scattered through the day and two 823s preceding the 372s (823 is informational and says I changed default printer).
A shared (USB connected to one pc) HP Photosmart printer never generates these errors.
The same Laserjet P1606dn printer is accessed by three different Win 8 machines over wired (1 pc) and wireless (2 pcs) network connections, and all three now get the same annoying and misleading error message even though their print jobs print perfectly.
Also, installing Full Solution driver (instead of Basic driver) did not fix it. Disabling Kaspersky firewall did not fix it.
Exception: when configuration page is printed from the Control Panel > Devices and Printers printer icon > Printing preferences... > Services tab > Print information pages, then the error message does NOT appear. Error only appears when printing from common applications (Word, etc.).

Can an HP expert please comment on this thread, including the link given in previous post to Windows 7 Forums?
Is anything lost by disabling bidirectional communications for my HP Laserjet P1606dn in order to eliminate spurious error messages?
Is there a bug in the HP driver causing this error?
Is bi-directional communications a separate communications interface which should simply be ignored and unchecked when using wired ethernet or wireless communications?

FM SSF_CLOSE failing and giving error message while printing a smartform

Hi,
for language spanish the smartform is not getting printed for output type SG11 but for english it is getting printed? What could be the reason? I debugged and found that SSF_CLOSE is failing and giving error message.
Thanks and regards,
AP.

Hi Aparajita,
for changing from one languages to another translations in SE63 is to be done, either search on SCN for using SE63 , or atleast see these wiki help .
Transaction SE63 - Translation Tools for Translators (BC-DOC-TTL) - SAP Library
Transaction SE63 (SAP Library - Translation Tools for Translators (BC-DOC-TTL))

Error While Printing the Report

Post Author: saqib
CA Forum: .NET
HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Error Message while using Yahoo and Firefox: An unexpected problem has occurred. Performing your action again in a few moments will probably solve the problem. If it persists, we suggest you close this window and re-launch Yahoo! Mail.

For the past several weeks I have received the following persistent annoying message while working with yahoo and Firefox 5

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Firefox > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Firefox > Preferences > Privacy > Cookies: "Show Cookies"

REP-1849: Failed while printing : Problem while printing on network printer

I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

Try the following if your printer is a network printer
1. Add Printers - select Local Printer
2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
4. Select the printer and printer type in "Add Printer" wizard.
5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
Hope this helps..
Yogesh
I am getting this error message while printing the report on Network Printer.
"REP-1849: Failed while printing"
Reports Server is not installed on my machine.
On shared printer, it has no problems.
Platform is Win2000. Report Builder 6.0.8.11.3
Plz help !
Thanks in advance !

An Unknown error occurred while printing

Product Name and Number: 3052A -=All-in-One Printer J611g
Windows Vista 32-bit
An Unknown error occurred while printing
No changes made to the system. 2 other HP printers hooked up to computer just fine, no issues, but the printers were not working due to age, etc.
I just bought this printer last night, and cannot believe the issues I am having trying to hook it up, and getting it running. I have been doing everything suggested to me, and things still keep happening that I cannot print yet!!
"An Unknown error occurred while printing" is the message I am getting when trying to print an invoice. I have uninstalled the printer, and reinstalled it, and at that time it showed everything to be working.....CD downloaded good, and the USB cable was connected correctly. I have run a HP Diagnostic, and all of it showed green check marks by everything. I have done HP updates, have done window updates, and I have NEVER had this kind of an issue with hooking up a HP Printer. Is it because it is for wireless also, and I do not have that hooked up at this time? Do I need to return/exchange this one for another HP Printer? I am really confused, need to get these invoices printed for customers, and what am I suppose to do? I really don't have time to sit around too long, and wait for solutions to this issue.

Hi ShopGirlKL,
Use the following utility to resolve the error message while printing.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91799-1&cc=us&dlc=en&lc=en&...
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

Hey ronniefai,
Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
Viewing the Print Summary
You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
Note: Print Center is available only while printing is in progress.
via AirPrint Basics
http://support.apple.com/kb/HT4356
If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
Thanks,
Matt M.

Error message while check printing

Hi All,
One of my users is confronted with an error message while trying to print the checks. The message says:
" Problem with parameter file while printing ".
Please advice how this can be resolved.
.....Jimmy.

Hi Jimmy,
What is your B1 version and PL? This error message looks like not B1 message.
Thanks,
Gordon.

How to add warning message while using 'print' function in Adobe LiveCycle Designer

I am trying to make pdf document for my company which requires adding a warning message while anyone use 'print' function from the page...
Does anyone know how to add warning message on LiveCycle Designer
Also my supervisor mentioned something using 'nag' if that rings any bell

No you shoudl never go into the XML source unless uinstricted to do so.
You can open the script editor (under the window menu). It will appear above the drawing area but below the toolbars. You can resize it if there is not enough room. When you click on an object in the form you can choose an event to script against in the Show dropdown. In your case you will want to choose the prePrint event. A line will show up that indicates the object that is associated with the script as well as the event and other information. Add your script below this line. Once that is done you are finished and your form is ready for testing.
Paul

Notification Does Not Exist - System Termination message while direct print

Dear Team
We are using Z Output Program & Z Form for taking Notification print. OID1 has been configured for the same.
Its working fine if Notification 'Print preview' is taken, but it is getting failed if Direct print(No Preview) is given.
When print is given directly from Notification, request is terminated with Message -Notification does Not exist'
This message is coming from FM - PM_NOTIFICATION_PRINT_CONTROL.
Pl guide me in resolving this issue.
Thanks in advance
Ashish

Hi,
At update stage PM_NOTIFICATION_PRINT_CONTROL checks that all information required is available. eg Valid workpapers was called and the data to print was passed over.
<----
If Everything is ok data to print is exported to memory. The main print cycle is started in UPDATE TASK. That means the Individual ABAPS will be called only when COMMIT WORK is issused in MIWO0F00.
As I have never used this FM, please check with your ABAP person to debug the code while printing directly. As per above statement, some of the data may not be passed over while doing direct print.
Also have you done the configuration on OID2 (Definition of papers per order / notification type).
Please check that.
Regards,
Maheswaran.

I keep getting an error message while trying to download the cd for my Epson SX515W Printer

Can any one help me with this problem? I keep getting an error message while trying to download the cd for my new Epson Stylus SX515W series printer.

Contact Epson's support and read the troubleshooting section of their manual - http://www.epson.co.uk/Store/Printers-and-All-in-Ones/Epson-Stylus-SX515W/Driver s-Support

Safari won't print: "Error while printing" message

Recently updated to Safari 6.2, on on 2012 Mac Pro, OSX 10.8.5. Tried to print a page from Amazon, and received "Error while printing" message. I then have to force quit Safari. I am able to print from Indesign, OpenOffice, and the same Amazon page from Chrome with no problem, so the problem seems to lie with Safari.
I ran Disk Warrior, and rebuilt permissions, but the problem persists.
I am reluctant to call Apple and be told that I have to reinstall system software, this seems related to my recent software update of Safari.
Could use some suggestions here if anyone knows what the problem might be.

It might be the Safari cache or cookies in Safari in you want to try ..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
No open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, try troubleshooting extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Error while printing message

Hi
I'm hoping someone can help me I have a Macbook and have been using a HP Deskjet D5560 printer with it since i bought it and now it will not let me print each time i go to print it says error while printing. I have gone into some settings and had a little look but can't seem to fix the problem. Has anyone got any ideas? I am very basic with computers with things like this so please keep it simple if possible!
Thanks
Anna

You may have a file permissions error or some other corruption.
Try these one at a time (restart and try adding after each) -
Reset Printing System - a menu choice in Printer Setup Utility.
Download the 10.4.10 COMBO updater and re-update with that.
Try the free trial of Printer Setup Repair from www.fixamac.net.

Annoying messages while printing

Similar Messages

Maybe you are looking for