Annoying Messge GU362 while executing a Report Writer Group Report

Hi,
We have lots of reports that were created using Report Painter.
We have used SETS in them. These sets are being updated from time to time (weekly / monthly).
Everything worked great until we have upgraded from 4.6C to ECC6.
Now, every time we executing the reports and for some reason is being generated (execute compilation. ALWAYS happened after updating the SETS) we get WARNNING MESSAGE GU362.
It's mainly annoying (the user have to press ENTER several times until the compilation continue)
Does anybody know if we can avoid this message?
BTW.
I found note no. 589291 which describes my problem.
The solution in it is to change our SETS which mean to change lots of reports => not the best solution for me.
Thanks,
Harel

Hi Christophe,
If you add a UDF within a XL reporter , eg: Company A, you will notice that there is a numbering behind, eg: BoldDate_0
If you want to run the same report in let's say Company B, you will notice that there is a numbering behind, eg: BoldDate_1
When you upgrade, I am not sure what XL reporter do, somehow, these numering could change or may not exist.
So, this is what I suggest you do.
Just create a simple report and simply add that UDF. In the Excel, you can see what the field is. If you see it is BoldDate only, then you just need to change the report to simply use BoldDate instead of BoldDate_0.
p/s: not so sure about the FIG but, if you can find it in the XL reporter documentation. I didn't spend too much time on it.
Good luck.

Similar Messages

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error while executing a report

Hi ,
I have a problem while executing a report to brower as ..
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
Thanks and Regards
Rajesh

Hello,
Open the query in query designer and check the query and see wht detailed error message you get.
Regds,
Shashank

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Portal asking for Login details again while executing the reports

Hi Team,
Our Portal is asking for Login details again while executing the reports individually.
The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
PLEASE ADVICE ASAP.
thanks & regards
Sneha

Hi Kiran,
I have recently taken up this portal.. so not clear on the structure.
however, I observed there was no user mapping available.. so i added the same with my login credentials..
stil the issue persists.
Please advice.
Sneha

Error while executing webi report

Hello Experts,
I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
After putting these object when I execute the report i get following error:
Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Can anyone suggest me how to resolve this error?
Regards,
Nirav Shah

yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
Thanks

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

Error while executing a report : Time limit exceeded

Hello Experts,
i have executed a report and it took long time and finally throw an error saying that time limit is exceeded ,
please suggest how to resolve the problem
Thanks in Advance
Nitya

Hi Nitya H,
There are many resons behind Time out issue.
It is better to find where exaclty, our report is taking more time.
Below are the some of the bottle necks we need to monitor for time out issue:
1) OLAP query generation time.
2) F4 Search time.
3) Read Cache.
4) Write Cache.
Above features we can monitor @ RSRT transaction.
If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
For F4 search ,keep mater data as data retrival target.
For Read Cache and Write Cache increase the query memory @ RSRT.
Plse check the report and let me know if there is other bottle necks for query execution....
_Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
Hope this may helps you...
Cheers,
Maruthi

Getting different result while executing the report by debugger

Hi All,
I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
Without debugger result is
a
b
c
With debugger i am getting result as
a
d
e
f
What may be the reason . Kindly help.
Thanks in advance.
S.Velsankar

Hi,
you mean you have'nt change anything while debugging and results are different when ALV is displayed?
I don't really understand your issue... Could you give more details?
Kr,
m.

Dump while executing the report in the background!!!

Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line        Source Code
32         WHEN 1.
   33           RAISE CNTL_SYSTEM_ERROR.
   34         WHEN 2.
   35           RAISE CNTL_ERROR.
   36         WHEN 3.
   37           class cl_gui_cfw definition load.
   38           message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
   39             raising create_error.
   40         WHEN 4.
   41           RAISE LIFETIME_ERROR.
   42         WHEN 5.
   43           RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
   44         WHEN OTHERS.
   45           RAISE CNTL_ERROR.
   46       ENDCASE.
   47
   48       m_container_type = CONTAINER_TYPE_CUSTOM.
   49
   50       CALL METHOD SET_VISIBLE
   51           EXPORTING
   52               VISIBLE = '1'
   53           EXCEPTIONS
   54               CNTL_SYSTEM_ERROR = 1
   55               CNTL_ERROR = 2.
   56
   57       CASE SY-SUBRC.
   58         WHEN 0.
   59         WHEN 1.
   60           RAISE CNTL_SYSTEM_ERROR.
   61         WHEN 2.
>>>>>           RAISE CNTL_ERROR.
   63         WHEN OTHERS.
   64           RAISE CNTL_ERROR.
   65       ENDCASE.
   66
   67       m_name = container_name.
   68       call method set_window_property
   69            exporting property_id = property_name
   70                      value       = m_name
   71                      keep_cache = 'X'
   72            exceptions others = 1.
   73       if sy-subrc ne 0.
   74         clear m_name.
   75         raise cntl_error.
   76       endif.
   77
   78       CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
   79         EXPORTING
   80           PROPERTY_ID             = property_height
   81         EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
Harish

Hello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger

While executing crystal report in visual studio getting hresult 0X80131515

I am working on visual studio 2010..windows form application i am try to create one crystal report.but while executing am getting
error like this:
Then I added crdb_adoplus.dll to
my refernce.but then also am getting same erro my Target Frame work is .Net
FrameWork 4
while coming to this line:
rpt.SetDataSource(ds.Tables(0))
what is wrong? how i can resolve this issue?

Hi jaseem0712,
Please ask this question on SAP Crystal Report forum instead of here:
http://scn.sap.com/community/crystal-reports/content
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Error occurred while Executing XL report

Hi,
I am getting the following error when i generate the XL report
<b>An error occurred while Executing report!
Description: Can't show non-modal form when modal form is displayed</b>
Regards,
Aravindhan.R

Hi!
You are probably editing a cell, if you exit the cell you are standing in (editing) the report should run properly

Issue while executing the report

Hello experts,
I have an issue related to executing the BI Report. In one report , i get an issue of Time Out, as the report is executed for a single day only with a single restriction. Also i execute the same report in RSRT, there also it gives a short dump. I checked the data into the related component for the same selection parameter values. here I get the data but it is creating issue while executing in RSRT or analyser or EP.
what is happening there am not able to understand. please advice.
Also searched in SDN but not get the relevant thread.
Thanks in advance
Neha

hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha

Error while executing a report from Planning

Hi,
I've got this error message when I execute a report from Hyperion Planning (web) :
"5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
Can you help me please ?
Thanks.
Virgile.

I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
restart the BI+ reporting services and then try to run the reports!

Annoying Messge GU362 while executing a Report Writer Group Report

Similar Messages

Maybe you are looking for