Annoying order display on GTX 670 PE/OC

Hi all
few days ago, I flashed my graphic card with a GOP/UEFI that I had here on the forum (thanks again )
everything worked like a charm until the day when i wanted to go to the bios/uefi, so I used like almost the time the FastBoot tool, the PC restarted,
but i had a black screen so i was like I was asking my self what's wrog ? than I had an I idea so I took my TV remote controller,
and yes it was displaying on the TV which is a lot annoying for me, since it is on my right and i can't see it comfortably from my desk,
and to be precise, my monitor is plugged on the (upper) DVI and the TV is plugged next to him on the HDMI
so my question is, except unplugin my TV (when I remember it) is there a way to change/switch the display priority or even duplicate the display ?
thanks to all, and have a nice day
PS: My Rig is on my Signature but i'll write again
MSI Z77 MPower - MSI GTX 670 PE/OC (with GOP/UEFI) - Windows 8 Pro x64

thanks to you teafie ,
I don't know if it's something with drivers since it only happens on UEFI but I will give it a try
EDIT :
As I expected it didn't work, I downloaded the DDU 6.3,
launched it on safe mode (twice : once with both screens plugged, the second time with only the monitor, with a reboot between each attempt)
gone to normal mode (with only the monitor) until then everything is showed on it (from UEFI to Windows) and it is marked as the Primary screen, so I installed the last drivers (reboot)
as soon as i pluged the HDMI cable my monitor went to secondary screen, and of course after another reboot UEFI is still showed on my TV
once again and anyway thank you teafie,
I searched the internet for days, and no solutions for both AMD/ATI and NVidia

Similar Messages

No display on GTX 670 PE

I recently bought a MSI 670 to replace my HD 7850, but after installing the 670 I am getting NO display from my card while in the x16 pcie socket. I works in the x8 socket and also in a x16 on a older AMD computer.
I have tried everything I can think of, including updating to the latest uefi bios, but still no display. The fans boot up on the graphics card and there are no error beeps, but the card does not seem to be recognized and the on-board graphics kick in.
I have checked both pcie power plugs and both are fine. Memory is seated okay and passed mem-test, no bent pins on CPU
Intel i5 25000k Sandybridge -DT-D2
MSI GeForce GTX 670 OC Twin Frozr Power Edition
Gigabyte-Z68xp-ud3
650w PSU
Thanks.

Quote from: Donavon on 14-August-13, 18:45:36
Okay, thanks. What is a GOP vbios?
It's has UEFI support allow you to enable fast boot and secure mode.
Quote from: Donavon on 14-August-13, 19:35:44
I have ordered a MSI Z77A-G45 motherboard. With my GTX 670 being MSI, then they should work happily together. What do you think?
yes it should works fine

Three displays with GTX 670 -- duplicating desktop problem

Just got a new computer with an Asus GTX 670 card.   I am running 3 displays: 1. (Main) Dell U2412M via DVI port,   2. Old Samsung LCD monitor via DVI port with VGA adapter, 3. Samsung 59" plasma TV via HDMI port. I am trying to duplicate the desktop on my TV, but the card will only allow me to extend the desktop to the TV. TV goes blank when I try to duplicate the desktop. I am able to duplicate the desktop on the TV when my third monitor is not connected. My old Samsung monitor displays an extended desktop which is what I want.
If anyone has figured out the workings of this new card, I'd like to know if it is possible to duplicate the desktop on my TV with my setup.   Thanks

Yes, as I mentioned in my post, the GTX will extend the desktop to all 3 displays, that is, I can move a window from the main monitor to either of the other two displays. I am trying to duplicate the desktop on my main monitor to the TV so they show exactly the same thing, as one would do in a presentation with a projector.   This is possible if I don't use a third monitor.

Msi gtx 670 pe can not more overvoltage?

i want buy msi gtx 670pe, but in other forum users tell me gtx 670 pe can not more overvoltage is true?

Quote from: flobelix on 05-February-13, 03:44:56
Any reference card will get hot and be loud. A GTX670 PE has a way advanced cooling keeping it cool, quite silent and most importantly with low temps ensures it won't run in the power limit. Reference cards will run into the power limit quite quickly. PE cards will mostly never reach 100%. That ensures high and constant boost clocks. With some oc a GTX670 can perform as fast as a reference GTX680.
I ordered today msi gtx 670 pe oc, I saw that the card have two led blu. but some pepole do not turn on blu leds, this is defect?

Four displays on one GTX 670 graphics card

For anyone needing or wanting four displays driven by one card, I just successfully hooked up my fourth display to an Asus GTX 670. I needed a Displayport to DVI adapter for my fourth display. The HDMI port is connected to a Plasma TV, but I'm sure I could have hooked up another monitor instead if I wanted.
By the way, I was concerned about using a long (50 feet) HDMI cable to the TV, but it works great. In reply to an earlier poster, I could edit on the plasma TV if needed, but I'm only using it for display. In my opinion, an HDMI cable is the ultimate method for getting content from a computer and/or internet to a TV.

The HDMi 1.4 cables that are heavily shielded are exactly what you want for that kind of cable run. I have a setup at my Father in Law's house with 50 Foot HDMI 1.4 cable and it runs great. It's also what I recommend to our clients since that is really far outside of DVI or Displayport's spec.
Eric
ADK

MOVED: Display driver stopped responding and has recovered. MSI GTX 670 Power Edition

This topic has been moved to Graphics Cards.
https://forum-en.msi.com/index.php?topic=251843.0

Hey there,
Noticed that my BIOS drivers were outdated so i updated them (Z68A-GD65 G3, version: 25.8), after all the reboots i logged on my computer, started teamspeak, and while searching for the teamspeak room the driver problem happened again.
Anyway, my power supply is NOX Hummer 80 600W, model: HUM80600.
The problems started on September of this year i think? I've had this computer for almost 3 years now. I have the latest Nvidia drivers, and this still happens, i've tried downgrading, fresh installing, and nothing worked.
Graphics card: MSI GTX 670 Power Edition 2GB GDDR5 PCI-E 3.0 DirectX11, S/N: 602-V284-02SB1207063830.
I'll try it tommorow if possible.
Thank you for the attention.

MSI GTX 670 completely freezes please help

Hi. I posted my problem on the nvidia forums and they suggested I RMA my graphics card and get it replaced... I thought I would post it here to see if anyone could help me...
This issue has started about a few days ago and it has been bugging me because I can't play any pc games for longer than about a minute. Anyway, so the problem is, after about 10 seconds of playing any pc game(I'm using the game minecraft as an example) my computer COMPLETELY freezes and blue squares appear. There is nothing I can do other than switch off the power. Even my mouse pointer freezes. I don't think it's an 'overheating' problem because I let it cool down for 24 hours and the problem persists.
I took a picture with my iphone to show
As you can see, the blue squares appear and EVERYTHING is frozen... Even if i'm not playing a game, sometimes on occasions my screen goes black and comes back and says "display driver has stopped responding and has successfully recovered". But the main issue is that I can't play games or even watch youtube videos for longer than 10 seconds...
I have a MSI GTX 670 and I have the 306.97 driver.
I have tried countless 'fixes' (for example, setting power management to prefer maximum performance in nvidia control panel) and others too..
Any replies will be GREATLY appreciated, thankyou

brand, model PSU?
Quote
I don't have another computer to test it in..
then you can RMA it and if the problem is not in the card the problem will persist.

New GeForce GTX 670 vs Quadro FX 4800

Had some computer failures, at first I thought my Quadro FX 4800 was dying... but it appears Im going to have to replace my motherboard. horay.
In trouble shooting I bought a GTX 670. (changed the txt file to make it work with Mercury) and now that I need to replace the mobo, I have a feeling the 4800 is ok.
So the question is... if the 4800 is fine... is there a significant jump in performance with the GTX 670? Is it worth the $400

Nick,
I'm late to this thread; just read it for the first time, and I have several observations to share...
1) I tend to agree with Harm and and RjL regarding the GTX being quite a bit stronger; so in your system where this is not evidenced, possibly the video card it is not the "critical path" (or bottleneck) for whatever you are doing (playback, render, etc.). Running Harm and Bill's excellent PPBM5 benchmark can tell you a lot about how the various areas of your system perform and the 800+ system database shows what others are getting from their listed hardware.
2) Premiere Pro is pretty good at taxing all of a PCs resources and "balance" of components is important in order to eek out the best overall performance. I would quickly add another RAID 0 pair to this system if I were you. You can test this theory too by looking at the performance tab in Windows task manager and see if your cpus (all 4 cores and 4 hyperthread cores) are working pretty hard. If they never all running at or very close to 100%, then you have gains to be made by either tweaking the system and/or revising components in your build.
3) You may not even have a motherboard problem; buy or borrow a highy rated 850w or larger power supply and see if that does not clear up whatever woes you are blaming your motherboard on; 650 may not be enough for rendering RED!
Regards,
Jim

K450 upgrading to GTX 670

I have a K450 which came with a GTX 650 installed. I have a GTX 670 which I'd rather use.
To get around the K450's weak PSU, I installed a FSP Booster X5 (which is a secondary PSU which fits in the 5.25 bay and provides additional PCI-e plugs). The secondary PSU works fine- I'm even using it now for the original GTX 650.
However, when I plug in my GTX 670, things go awry. The system powers on, and boots. The new GTX 670's fan runs, and it appears to be fine.
However, there's no display. Not during boot, not once the OS has booted. No BIOS, no post, nothing. I literally get no signal. Switching to onboard video doesn't work either. I can select in BIOS to only use onboard graphics, but as soon as I put in the GTX 670, even the onboard doesn't display.
I'm wondering if there may be some incompatibility in the BIOS with this GPU, or if a BIOS upgrade is even possible. I've read online that the default K450 supports up to GTX 660s, but I assumed that was a limitation of the PSU and not something else. Since the PSU isn't the issue here, I'm a t a loss what to try next.

jcarr77777 wrote:
I'm having the same exact problem trying to install a RADEON.
The power supply works but the only card recognized by the bios is the gt 650
Did you ever resolve this?
I had reason to believe my 670 was bad, so I put my tests on hold until I could afford another. But getting another wont help, I'd rather not spend the money.
It would really too bad if the 650 is the *only* card you can use on this box...

GTX 670 stopped working, successfully recovered issue

Not sure if anyone experienced the following and have solution but any advice would be great.
I recently purchased a GTX 670, did a format and everything was working fine but as of yesterday I keep getting 'Display driver NVIDIA Windows Kernel Mode Driver Version 314.22 has stopped working and recovered'. I get the error message as soon as I boot up, no applications or games loaded, it just crashes on desktop.
I download MSI Afterburner to check the temps and noticed that if I leave the PC idle the GPU will hit 99% and as soon as I click on the mouse, it will drop back down to idle and I will get the 'Display driver NVIDIA Windows Kernel Mode Driver Version 314.22 has stopped working and recovered'.
I tried the most recent drivers and the last 5 versions of Nvidia drivers but that made no different.
Nothing has been installed or uninstalled for the past week.
Thanks

Have the same issue, but the steps taken to reproduce this error is slightly different, computer was working fine the day before and this issue only arised yesterday without me installing or doing anything to the computer in the time inbetween.
PC specs
Gigabyte Z77X-UD5H
Gskill 8GB ram (can't remember the model, at work now)
MSI GTX 670 OC edition
Intel I5 3570K i think
Windows 8
OS HDD - Crucial M4 128gb
Steps :
1.)Was watch youtube on 1080p yesterday and after ~40 minutes; nearing the end of 40 mins, the video and sound slows to a crawl where each spoken word was produced one at a time
2.)Closed the browser (firefox)and the PC had stuttering issues - Cursor freezed for a good 20 seconds and then became normal again whereupon after 2-3 minutes of normal usage it freezes up again (Noticed that the CPU was running a full load after each freeze for a good 1-2 seconds)
3.)After 5-6 minutes of stuttering a windows notification comes up and says that Nvidia 314.22 kernel mode has crashed and has been recovered (Only able to reproduce this twice, it never appears again)
4.)Thereafter I launched a game to try to see if it was an isolated issue with the browser/plugin - less than 10 minutes of playthrough, the game hanged with looped sound and freezed screen, bringing up the Ctrl - Alt - Del menu and selecting task manager brings a black screen and the PC restarts on its own
5.)Proceeded to do a clean uninstall of the 314.22 drivers and installed the 306.97 driver provided by MSI
6.)Updated the SSD firmware
7.)Same issue ingame after that, intermittent screen freezes where after close to 8 minutes of play, screen froze and sound looped
Solutions tried but failed -
1.)Updating SSD firmware
2.)Rolling back of drivers - the kernel mode recovery notification no longer appears but the pc just freezes and sound loop outright ingame
3.)Trying to locate the malware(Manual search for the file and using Malwarebytes) - Iehighutil.exe but none found, gpu load and temp looks normal in gpu-z when the freezes occur
Have no idea why this error arised, nothing was installed/changed between the time it was fine and the error arose. Have read that it could be the windows update KB2807986 but i doubt so as that's for windows 7?
Power supply seems to be fine as well, have not run memtest on ram but i doubt its the ram - seeing as how the notification mentioned nvidia driver kernel mode.
Please help or try to provide solutions that are feasible if possible.
Thank you and sorry for the lengthy post.

GTX 670 Power Edition gives no video signal

Hoping somebody can help here. I've had a long string of problems which seemed graphics card related. Initially, the problem that Windows would reboot with no error message or warning of any kind about a minute after logging in. No problems in safe mode nor any problem if I set Windows to start in Diagnostic Mode. Advice at the time suggested doing a system repair from my installation CD but didn't have time to do this before going on holiday. On return, the problem had deteriorated (or a new problem appeared) - there was no video signal, not even the BIOS screen.
At this time my graphics card was an NVidia GTX 580, motherboard a Gigabyte GA-X58A-UD3R, I-7 950 CPU, 850W XFX PSU.
I ran through a host of tests to eliminate possible causes:
1. Tried the card in all PCI_E slots but still no video.
2. Tried another card (NVidia Quadro) in all PCI-E slots, system booted successfully with video and could login to Windows (difference here is the Quadro is powered directly from the motherboard).
3. Tried a number of DVI cables with both cards, the Quadro worked with all of them the 570 stubbornly refused to give a video signal.
Decided the problem was either the PSU or the GTX 580. Returned the latter under warranty and purchased the MSI GTX 570 PE. Installed this and again no video signal but ran through the above tests again with exactly the same results. However could now test the 570 on another system (could not try this with the 680 as PSU on my other system only had 2 6-pin PCI-E connections and the 580 required an 8-pin and a 6-pin power connection). The 570 at least produced the BIOS screen, booted Linux and presented a login screen. Didn't login as the PSU on this system was probably on the marginal side for wattage.
Decided then that I had a strange PSU problem. It could power my PC with the Quadro, suggesting motherboard, CPU, RAM and disks were all OK but could not provide sufficient power for either the 580 or the 670 cards. Bought a new 850W PSU and have just installed this with the 670 card in and yet again I get no video signal. I am now stumped as to what the problem can be so would welcome any suggestions as to what may be wrong and/or what else I can try.
Thanks,
George

Quote from: Svet on 16-November-12, 06:48:32
then you should contact mainboard vendor about it as problem is not in the VGA.
I had given what I thought was sufficient information about the PC spec in my first post. Both what I started with and what I'd changed. But I'll give the full spec here:
Motherboard: GA-X58A-UD3R Rev 2.0
CPU: Intel I-7 950 3.06 GHz
Memory: 3x4GB Crucial DDR3 PC3-10600 • CL=9 • Unbuffered • NON-ECC • DDR3-1333 • 1.5V • 512Meg x 64
Disks: Samsung 64GB SSD SATA System disk
WD 1TB and 500GB SATA drives
PSU: Coolermaster RS-850-SPHA-D3 80+ Gold - 3.3V:22A, 5V:25A, 12V:70A single 12V rail
GPU: MSI GTX 670 2GB OC Power Edition
OS: Windows 7 Professional 64-bit
The changes were the PSU and the GPU. The problem started when I had an XFX Black Edition 80+ Bronze PSU and a Gigabyte GTX 580 GPU otherwise the rest of the spec was and has remained the same. With my original spec, it ran perfectly happily for almost 2 years but then started with the system rebooting without warning about a minute after login (it would stay at the login screen indefinitely). After running some tests the clues seemed to point to the GPU configuration having been corrupted in some way (from sfc logs). However, if I set Windows to Selective startup, I could login and the system would stay up. I decided to do a system repair from my Windows 7 installation disk but had to postpone this for a couple of weeks during which time the PC was powered off.
When I next powered up the system, there was no video signal at any time. The investigation I did made me think either the GPU was faulty or there was a PSU problem - all other aspects of the system could be shown to work. I returned the GTX580 as it was under warranty and purchased the GTX670 with the refund. This exhibited the same symptoms as the 580 - no video signal no matter how long I left the system running. I was able to test the 670 in another system and it worked there. I couldn't run this test with the 680 as the PSU did not have an 8-pin PCI-E connector - just 2 6-pin connectors.
I then added an NVidia Quadro card alongside the 670 and booted the system with this as the display GPU. This gave me a video signal at all times and more importantly allowed me to get into Windows and check if it recognised the 670 in Device manager. It did but reported a problem as, until now, I hadn't been able to load the 670 driver. I did this and rebooted - again no video signal during post and initial Windows boot but I did get video as soon as the newly installed driver was loaded. This is the state I'm in now other than I've flashed the vbios as suggested and the GPU no longer works on my other PC.
Note, I can happily remove the Quadro and boot the system with just the 670, except I don't get any video signal until Windows has loaded the 670 driver - the monitor light stays stubbornly orange till that point. After that, everything seems to be fine - I don't get the reboots that this problem started with. The only other clue I have is with my original spec I always had a problem from shortly after building it where I would need to power cycle the system most times as I could not wake it from hibernate mode.
I'm hoping this helps as I know I have run out of ideas of things to do. The only thing I have left to try is update the motherboard BIOS.
George

UEFI GOP VBIOS for GTX 670 Power Edition?

Would anyone mind letting me know if there's a UEFI VBIOS for this card? Thanks.
SN: 602-v284-030B1210203217
NVIDIA Firmware Update Utility (Version 5.127)
Adapter: GeForce GTX 670 (10DE,1189,1462,2842) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
Image Size : 97280 bytes
Version : 80.04.31.00.46
~CRC32 : 47A14393
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040005
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 670
Board ID : E113
PCI ID : 10DE-1189
Subsystem ID : 1462-2842
Hierarchy ID : Normal Board
Chip SKU : 325-0
Project : 2004-0005
CDP : N/A
Build Date : 05/21/12
Modification Date : 07/06/12
UEFI Support : No
UEFI Version : N/A
Sign-On Message : GK104 P2004 SKU 0005 VGA BIOS (HWDIAG)
MSINV284MS.122
Backed up VBIOS: mediafire.com/?g4845dkgjfis716
Sorry for the missing http://, it won't let me post external links. :\

I currently have a Vbios installed on my GTX 670PE OC but when i go into UEFI bios the mouse flickers. Could somebody advise if i have the newest or i need a update of my bios?
I tried a reflash and i still have the same issue. But whenever i switch over to the IGP in UEFI bios it works fine. I have windows 8 features enabled and MSI fast boot also enabled.
All works fine is windows.
Could somebody advise if i have the newest or i need a update of my bios?
NVIDIA Firmware Update Utility (Version 5.134)
Adapter: GeForce GTX 670 (10DE,1189,1462,2842) H:--:NRM B:01,PCI,D:00,F:00
The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.
Identifying EEPROM...
EEPROM ID (EF,3012) : WBond W25X20A 2.7-3.6V 2048Kx1S, page
Reading adapter firmware image...
Image Size : 162816 bytes
Version : 80.04.4B.00.47
~CRC32 : C65FF032
OEM String : NVIDIA
Vendor Name : NVIDIA Corporation
Product Name : GK104 Board - 20040005
Product Revision : Chip Rev
Device Name(s) : GeForce GTX 670
Board ID : E113
PCI ID : 10DE-1189
Subsystem ID : 1462-2842
Hierarchy ID : Normal Board
Chip SKU : 325-0
Project : 2004-0005
CDP : N/A
Build Date : 07/09/12
Modification Date : 08/22/12
UEFI Support : Yes
UEFI Version : 0x1000B (Aug 3 2012 @ 13604321)
UEFI Signer(s) : Microsoft Corporation UEFI CA 2011
Sign-On Message : GK104 P2004 SKU 0005 VGA BIOS (HWDIAG)
MSINV284MH.120

MSI GTX 670 Nvidia driver stopping

I have started getting errors "Display driver nvlddmkm stopped responding and has successfully recovered." This happens when playing World of Warcraft, and I have also been able to recreate it using the Heaven Benchmark.
I have taken these steps
1. Re-installed windows 8.1
2. Run windows memory tests
3. Installed current nvidia drivers
4. Reverted to previous nvidia driver
5. Run benchmarks, including Heaven which recreated the error
Did a lot of reasearch on the web, there are solutions from changing the registry time out to upping the voltage to the GPU, have been hesitant to do these, because first doesn't seem like i should have to up the time out, and second, not sure how to safely up the voltage.
There is some information about another BIOS for the GPU, saying something about fixing a MOBO compatibility issue. Should I be downloading this and if so how? Couldn't get live update 5 to show VGA BIOS, and live update 6 doesn't seem to run on my computer
I'm looking for any suggestions on how to fix this
Thanks

Thought I would do a summary so you dont have to read the whole post.
My MSI GTX 670 started getting the following error:
Display driver nvlddmkm stopped responding and has successfully recovered.
This occurred when playing WOW and in the Heaven Benchmark.
Per your recommendations, I have done the following with no success
I uninstalled the display driver using DDU in safemode, and reinstalled the recommend driver.
I moved the board to another machine, the heaven benchmark had the same problem.
Put my GTX 560Ti in my main computer, no issues
RMAed the board
Received a returned board from MSI with a different serial number
Put it in my computer and had the same error using the Heaven Benchmark
provided the s/n and vbios of the new board
s/n 602-V284-030B1302117626
BIOS version
80.4.92.0.9
Ran Prime95 on my computer for 7 hours in blended mode and 12 hours in low FFT mode, no issues
Moved the new board to the other computer, problem occurred
Just trying to figure out what to do next

Stats Tab in Header ( Purchase order Display )

Warm greetings,
In Purchase order display Stats Tab in Header ( Purchase order Display )
Purchase order consists of K & A (Account assignment category) K Stands for Cost center & A stands for asset
4 Qty for 500 = 2000
1Qty of Asset 5000/=
Here the total Value of the PO is 7000/=
Once the purchase order is created in status tab
Still to deliv : shows whole quantity of the PO Example 5Qty
in which 4qty to k( cost center) & 1qty to A( Asset)
But amount value shows only 2000/=
instead of 7000/=
Generally it should show as 7000/=
Help me out to fix this issue pleas,
Regards
Shamul heq

Hi,
pls check that the item which you are procuring for Asset is Non-Valuated.
Thats why it is showing amount as 2000 only.
Regards,
Rahul Patil.

MVC in Purchase orders display

Hi friends,
   i would <b>like to work purchase orders display scenario using MVC. if any body done this please let me know which CLASS</b> i need to use while i will create controller.
thanks in advance,
cheers,
Kannan.

Nothing special to creating the method. You just create a normal global class in the ABAP workbench. The only special thing you should do is make your class inherit from CL_BSP_MODEL.
Unlike Views and Controllers, there is no integrated creation or visibility to the model in the workbench.
Generally in the coding of your Controller (usually DO_REQUEST or DO_INIT) you create the link to the model class in code:
if me->model is initial.
    me->model ?= create_model( model_id = 'SO'
                               class_name = 'ZCL_ES_BSP_M_SE16' ).
endif.

Annoying order display on GTX 670 PE/OC

Similar Messages

Maybe you are looking for