Annoying PPPoE pop-up message using Airport

Even though my airport wireless works great, when browsing or checking email I keep getting a pop-up that says, "Can't find a PPPoE Server". This doesn't affect the operation of anything I am doing and when I close the box everything continues to work fine. How do I keep this annoying pop-up from occurring?
On the left side of the opening screen of Airport Utility, I have "Airport" (selected), "Firewire" (not connected), and "Ethernet" (not connected). When I go to Airport Utility (Advanced Setting), I get to a screen that says, "Connect Using" with the only choices being Ethernet or PPPoE. I choose Ethernet (even though I don't have Ethernet, trying to get rid of the PPPoE pop-up). Below that item it says "Configure Using" and I select "DHCP" (the other choice is "Manually"). Any ideas about shutting off the annoying PPPoE pop-up? Thanks.

I have a Network extreme and 2 network express bases currently (my house is small but loaded wth chimneys lead pipes and water tanks which hamper basic routers). I am getting the same pop up but during the process of my Mac attempting to access the PPoE server there is no internet connection. (it took me 5 minutes to move from a previous page to this page thanks to this recurring process).
Previous to this set up I was using the standard BT infinty router which used to lose the connection frequently. I've even tried connecting the nearest Network Express to the Mac with an ethernet cable but to no avail. I still get frequent 3-5 minute breaks in connection mostly on start up or if the Mac wakes from sleep.
Where is the setting to switch to DHCP only?
Its really beginning to bug me. 2 iPhones and 1 iPad have no probelm connecting to the Network.

Similar Messages

  • Why do i get this pop up message using flah player 8

    I get the following pop up message: Where is the debugger
    profiler running?
    I used a movie from flashkit, embedded it in dreamweaver and
    when i refreshed this message came up, and asked if i was using a
    localhost or if other what was the IP address...
    I have never seen this before, has anyone else?
    Lee

    That is a problem with the Adobe Download Manager (getplusplusadobe16287).
    See
    [[Troubleshooting plugins]]
    [[Troubleshooting extensions and themes]]

  • Message "Use the most recent SAPGUI version" in search help for CC or GL

    Hi,
    Would anybody know how to make the pop-up message "Use the most recent SAPGUI version" disappear when using the cost center or G/L account search help during shopping cart creation. We are using SRM 4.0 (SRM Server 500) connected to ECC 6.0 backend.
    I've tried looking at SAPnote 929208 which essentially is for correcting the same message for a 640 WAS connection to a 700 WAS but the kernel patches recommended are already installed in the system (current patch level for both systems even exceeded recommended kernel patch levels).
    Thanks and regards,
    Joy

    Hello,
    Please  check the attached note 1005358.
    Note: Customers using SRM 4.0, which allows using integrated ITS 6.40,
    must use the integrated ITS 6.40 if they wish to use ERP 2005 (ECC 6.0)
    as a Backend system. No code changes will be done for SRM 4.0.
    In order to maintain the product version please check the following;
    http://service.sap.com/system-data, note 172481.
    Also, check the following notes:
    929208 - 640 RFC branch, "Use the most recent SAPGUI version"
    721993 - ITS updates in Release 6.40 (SAP Integrated ITS)
    I hope it helps.
    Kind regards,
    Gaurav
    PLEASE GIVE FULL POINTS FOR USEFUL REPLIES

  • Error message "not connected via PPPoE" when trying to connect using airport wireless

    I cannot connect to my wireless internet connection using my ibook laptop. Using airport, I keep getting the message "host cannot find the PPPoE" or something like that. Any ideas how to fix this?

    Hi, Bob. Welcome to Apple Support Communities.
    Which exact iBook model is it? ("iBook" covers a lot of different Mac models, each with different capabilities.)
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Which version of the operating system is it running now?
    What kind of optical drive does it have? (CD-ROM, CD-RW, DVD, Combo, or SuperDrive?)

  • Calendar. Annoying pop-up message with Using calendar OS X Mavericks. When it tries to connect to iCloud it gives me VERY annoying pop-up message, that it can't connect and that server responds with CalDAVAddSubscriptionCalendarQueueableOperation: 400.

    Using calendar in OS X Mavericks. When it tries to connect to iCloud it gives me VERY annoying pop-up message, that it can't connect and that server responds with CalDAVAddSubscriptionCalendarQueueableOperation: 400.
    Help me please, really need my calendar!

    Hello Steve
    The simple and quick fix is right-clicking on that little Safe icon in the system tray (near the system clock) and choose Stop Backup/Synchronization. Do you see that icon?
    Turn it on and off as needed. Did this work for you?
    Scott

  • I own fully paid for license for Dreamweaver CS6. Every time I click to open the app, I get a very annoying pop-up message. How do I stop it?

    I own fully paid for license for a Mac version of Dreamweaver cs6. Every time I click to open the app, and before I can start using CS6, I get a very annoying pop-up message (see screen shot below) that states I have a trial version and do I want to buy into the cloud version, which I don't.  How do I stop the pop-up? This message seems to originate from the Extension Manager.
    I tried trashing Extension Manager, but another annoying pops-up which states that I have to "reinstall the application manager". Of course, there is no such thing as a "application manager" that I can find. I guess it should be "extension manager".
    I no longer own Photoshop because there are so many great alternatives available. Can't wait to do the same with Dreamweaver.
    Adobe can't even get the correct cost. I'm an US Customer however they quote the Creative Cloud in Euros. Go figure........

    I have faced this problem in the past.  In my case, I had Adobe registered under two separate ID.  One when a student and the second as a regular employed individual.  Because I purchased the licensed while at the University, the registration was listed under the school id. So, when I login in Adobe using my regular ID, I then received the annoying marketing campaign add.
    Therefore, review that you have enter the correct id during loging. IT is possible that you login to the community as one ID but purchased the subscription using a separate user name. In these cases, the computer will not know that you already have a paying license.

  • Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???

    Since update to iOS 7, every time I open an app a pop up message telling me to connect to iTunes to use push notifications comes up. EVERY TIME! How do I make it stop???

    Do you use iTunes with your iPad and if so, have you tried syncing your iPad with iTunes since you updated the iOS?

  • HT4623 I'm continually getting a pop-up message on my iPhone that asks me to enter my Apple ID password for an email address that I no longer use.  How do I get rid of it?

    I'm continually getting a pop-up message on my iPhone asking me to enter my Apple ID password for a email address I no longer use.  How do I make it stop?

    If you are signed into your current iCloud ID you shouldn't be prompted for the old ID unless there is another service still signed into it.  Check the ID in iMessage (Settings>Messages>Send & Receive), FaceTime (Settings>FaceTime), Game Center (Settings>Game Center), the iTunes store (Settings>iTunes & App Store), etc. to make sure you aren't still signed in with the old ID.  If you are, tap the ID, sign out, then sign back in with the new ID.

  • How do you upload firmware to Airport extreme with the following message: This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. I'm using airport utility 6.0

    The airport extreme at my parent's house has not had its firmware update in some time and it keeps dropping the internet connection and needing to be reset.
    I went to update firmware and opened up airport utilities (I'm running airport 6.0 on Mountain Lion, 10.7.4).  Everytime I open the airport utility I get the following message: "
    This version of AirPort Utility requires this AirPort Extreme use firmware version 7.3.1 or later. Use AirPort Utility 5.6 to update this base station. AirPort Utility 5.6 is available at AirPort Service and Support.
    I've followed the link and tried to update firmwares but none are available and the print says that airport utility will look to see if firmware are available and load them as necessary when prompted by user.
    One link said the only way to solve this problem is open up Airport Utility 5.6. I tried to do this, but 5.6 is not supported on Mountain Lion and couldn't be opened up.
    I'm getting the exact same message on my other computer, a Mac Air.
    So basically, can't download new firmware and am stuck with a ****** airport extreme that needs to keep being reset, a factory reset, in order to use the internet, but then continues to give me the same message.
    Thanks!

    See this article for instructions on how to install AirPort Utility 5.6 for Lion on Mountain Lion:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • TS1368 HELP!!! After upgrading to IOS 6.13 my IPAD Stucks in a plug-in screen and the Itunes. When i Try to connect to iTUNES pop-up message apear "iTunes has detected an iPad in recovery mode.. You must restore this iPad before it can be used with iTunes

    I have windows 8 enterprise OS and iTunes ver. 10.5.0.142. I was upgrading my iPad to IOS 6.1.3. After finishing the upgrade my iPad Reboot and currently stucked-up in a plug-in screen and iTunes Logo. When I try to connect it to the iTunes pop-up message appear saying " iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes." In short, I push the restore button then another pop-up message appear saying " The iPad software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later." I tried many ways but still no luck. I repeatedly reboot the iPad and open the iTunes still the same problem. I try also to uninstall the iTunes and installed the lower version but still the same problem, I even check the firewall if the ITunes was block or My privileges is administrator to run the iTunes or even reset my winsock but the problem still remain. PLEASE HELP! Thank you in advance!!!

    Turn off your firewall and antivirus software.

  • After I started using Airport Express, my HP LaserJet 5000 won't print. I get the message "Network host '192.168.0.4' is busy." How do I fix this?

    After I started using Airport Express, I get the message " host '192.168.0.4' is busy" andmy HP [ethernet] printer no longer works.

    OK, I found this thread which answered my question.
    http://discussions.apple.com/thread.jspa?messageID=610763&#610763

  • I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    I have 2 games Words with Friends and Cityville that receives a Pop-up message form iTunes...  "Connect to iTunes to use Push Notifications" and will not allow me to exit out of the app or play.  How can I get this message to STOP?

    Yes - I connected my phone to my computer / Itunes and went into the apps section, but from there I have no idea how to manage the push notifications.  I even tryied going into itunes that is installed on my phone.  I still cannot find anyplace to manage these popups.  I have also gone into settings - notifiations - and tried turning all notifications for these apps all off but that didnt work either.  Any guidance is MUCH appreciated - Im not sure where to go from here.

  • Update to latest iOS. Keep getting pop up message to "Connect to iTunes to use Push Notifications". This message will not go away. Any ideas on how to fix?

    Update to latest iOS. Keep getting pop up message to "Connect to iTunes to use Push Notifications". This message will not go away. Any ideas on how to fix?

    Hi
    I have the same Problem at my I phone 4s , its killing me all application not working .
    now WE NEED HELP ,,,,i could not even know how to connect to I TUNES
    Thanks

  • Can't send messages using pop account

    Hello,
    I can’t send mail with some of my pop accounts using mail app. I have a .mac and a Yahoo account both work perfect. The other POP accounts don’t send. I get an error that says, “Cannot send message using the Server xxxxxxx” I check the setting and they are fine. It stop working a couple of days ago. I didn’t make any changes on the accounts settings.

    I had the same problem until I called Earthlink support – it's your ISP's problem not yours. They will help you open a new POP account and set a new port (in the advanced option in preferences) to authorize your ability to send mail. I have no idea whether Yahoo is as helpful as Earthlink. They may not be because they're free.

  • Why pop up message comes now if i use find my iphone to locate my family phone added with same id

    I was using find my iphone app to locate my kids as all my iphones were registred against one ID. They never come to know that I am locating their location and know where they are. Now I come to know that when i tried to locate them pop message comes to their phones that someone has tried to search your location. This is really not good. even if phone lost and other person can find out that we are trying to search the location. How to close this pop up messages or what is the solution?

    Once again - check that out:
    http://support.apple.com/kb/TS4006
    "With iCloud and iOS 5 or later you can locate, play a sound on, display a message on and remotely lock, or erase your iPhone, iPad, iPod touch, or Mac. If these features do not work as expected, use the troubleshooting steps below. "
    Translation: if you didn't mess up by clicking "play sound" or "display message", then your kids just got you. They already disabled location services I bet.
    Another translation if first was too subtle, there is no message if you just locating.

Maybe you are looking for

  • Problem in identifying control file when creating physical standby

    hi there, (database version: 10.2.0.4 plateform linux) I'm using the command as below to create physical standby database from backup: rman target / auxiliary sys/tiger@paceview Recovery Manager: Release 10.2.0.4.0 - Production on Tue Sep 4 18:05:53

  • Export in pages

    When I use the export function in pages there is an advise that says translated from Spanish " The exported file will be available trough shared files, what does it mean? Where can I find the exported file?, maybe in the public folder of my main comp

  • An error occurred during the compilation of the requested file, or one of its dependencies.

    An error occurred during the compilation of the requested file, or one of its dependencies. The type or namespace name 'Directory Services' does not exist in the namespace 'System' (are you missing an assembly reference?) 

  • Preview size & quality settings

    Although I have been using LR for many months I am still confused as to what to set my import settings to when it comes to previews. Standard or 1:1? What quality settings? Can anyone enlighten me on best practices?

  • How to configure binding?

    I am using MS Acess 2010 (*.accdb) as my database with Dreamweaver CS5. I got the database to be seen on the Database window but when I click on Binidngs the +- buttons are grey out. What am I doing wrong? I am starting my project using .asp. When I