Annoying problem that happens when cpu fsb is set to 133

Hi, i have a real annoing problem wich occurs when i set my fsb on my spu to 133(which it is supposet to be set on). It's a while now since i bought my computer. i can start of with the specs before I go any deeper now.
i use:
Motherbord MSI KT4 Ultra
CPU AMD athlon xp 2400 2.0 ghz
Gainward Geforce 4 4600
and 256 ddr ram
as i said when the fsb on the cpu is set to 133 it wont get in to the os, it just reboots itself when the winxp load menu comes up. however if i set the fsb down to 100 everything works (besides that i now am running at 1.8 ghz or something)
now the thing is when i bought it i had no use for 2.0 ghz when i bouth it so i dint care much and learned to live wih it but now games requires more power and so i want what i payed for, but the problem still stands i cant use optmal power due to this.. anyone have a clue of what i can do to fix this, is it a physical hardware malfunction, or can i fix this?
please please respond..

hm, im not that good in technical terms in english, what do you mean?
that my power supply isnt up for the job, that it could be my ram and i have not to good cooling?
as for the cooling i bought what was supported for my cpu.. it might be the power supply, i have had problems with power supply earlier but i bought a brand new one. the RAM i have no idea on..

Similar Messages

  • Computer AND iTunes don't recognize my iPod touch.  Comp thinks it is a camera.  iTunes won't bring up devices at all.  I've already uninstalled iTunes and QT and reinstalled after problem that happened when I updated iTunes... getting beyond P/Oed!!!

    Computer AND iTunes don't recognize my iPod touch.  Comp thinks it is a camera or something.  iTunes won't bring up devices at all.  I've already uninstalled iTunes and QT and reinstalled after problem that happened when I updated iTunes - updated iTunes completely demolished my computer's ability to recognize the sound card and computer had NO sound at all.  I had to uninstall iTunes, QT, AND my sound card and reinstall them all.  Sound worked fine, but now I can't sync my iPod.  Computer recognizes that "something" is hooked up (thinks it might possibly be a camera) and I get that "open with" window.  In "my computer" it shows that there is an "iPod" connected, but it is pictured as a camera.  In iTunes my username is no longer appearing (although account info is there) and NO devices whatsoever get listed.  There is nothing wrong with my USB ports or cable.  And of course Apple won't help anyone unless you pay them to. ... I am getting beyond P/Oed!!!  You pay hundreds for a product and all you get are headaches with their stupid bug infested software and no support at all.
    Can anyone out there help me clean up this unbelievable mess Apple and iTunes has created in my computer?
    Thank you.
    Evie

    After three completely wasted days trying to figure all of this out I finally got it fixed - on my own - by reading dozens and dozens of rogue posts in indie forums from people that refuse to dish out money to have a company TRY and advise possible fixes on their own glitches.
    (here's a novel idea - fix the glitches Apple.  Or - don't send out updates filled with bugs in the first place)
    Everything (several applications) had to be uninstalled in a very specific order and then restarted , then it all had to be verified with manual deletions of leftovers, and emptying the recycle bin, then another restart, then iT had to be reinstalled again and the system restarted again, and two more update downloads. Holy!!!
    I love my little iPod touch, but I honestly must say, when this kind of thing happens (and it has several times now when I try to deal with iTunes or Apple), it makes me want to flush it down the toilet.

  • HT3576 How do you fix the problem that happens when if I open my notification for an app, it disappears on the Notification Center?

    I was updating an app on my iPad (seeds pro), and when it was fully updated, I opened it. I tried to use a feature on it, but it said I need push notifications enabled. I was looking around in the notification part of the settings app, and when I go back to the specified app, it still didn't let me use the feature. But the additional thing is that now, when I open a notification for ANY app, or at least open the app, it disappears from the Notification Center. I really need help in fixing this bug or problem or whatever it is.

    It didn't work like that before. And I know it wasn't a new feature in the iOS7 update, I've never had my notifications deleted from the Notification Center until a week ago. Before that, I kept my notifications in the Notification Center.

  • Need help fixing my safari.  have already done files perms repair to no avail.  Only thing that happens when I select Safari is the screen changes color.

    I Need assistance repairing my browser "Safari" on my MacBook Pro.  The only thing that happens when I select it is that the Icon does bounce up and down.  I've already tried to repair the files perms to no avail. I have also created another user and tried to use Safari when logged on as them and it didn't work then either.
    Help!!  I'm new to Apple but have loads of PC experience...

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

    I have a new computer. I've installed iTunes. I don't want to lose the calendar and contact data nor the apps currently on my iPod Touch. Will that happen when I sync?

    I don't think so. When you open iTunes, go to "Store" on the top and click "Authorize this Computer." Type in your email and pass, and click authorize. Then, when you connect you iPod for the first time, it should tell you "this iPod is synced with another computer, blah blah." It should give you the option to either "Erase and Sync," or "Transfer Purchases." Click "Transfer Purchases and your content should go into your new iTunes.
    If this doesn't work and you still have your old computer there's another thing you can do. I know this works on windows, but I'm not sure how to do it on a Mac, maybe someone can offer some help. Assuming you have Windows, go to Start>Music>iTunes Media and you should see Music, Apps, Movies, etc. This is all the stuff in your iTunes. If you have an external hard drive or your iTunes library is small in terms of file size, you can do this in one go. Transfer the content (as much as you can fit at one time) onto the external storage. Then, put that content on your new computer on the desktop or somewhere where you can find it again. Open iTunes, and folder by folder highlight everything in the folder and drag it into the iTunes library. It should say "importing (content)" or something and then it should be in your library. If you look in your Music folder again, there should now be another "iTunes" folder there with all of your content back in it.
    Hope one if these options works for you. Best of luck!

  • When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up

    When you turn on the ipad2 it does not start up properly.  The rotating disk that happens when you turn off the ipad appears after the apple logo comes up during start-up and stays there for ten minutes.  Then, the ipad will start up properly.

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • What happens when your iphone charger sets on fire and you tell apple about it ?.

    what happens when your iphone charger sets on fire and you tell apple about it ?.

    They make a decision. How did you tell Apple about it?

  • Trying to understand problems that occur when redistributing between two OSPF processes

    Hi all, I'm currently brushing up on my OSPF and trying to understand the problems that can occur when redistributing between two OSPF processes. I have read and understand (I think!) the issues caused by the fact that the same route submitted by two different OSPF processes may not necessarily follow the OSPF rules that one would expect - for example, OSPF preferring intra-area routes to inter-area routes to external routes, but only within the same process. So, if the same route is submitted from two different processes, that rule goes out the window.
    But I'm having some difficulty getting my head around the idea of setting the administrative distance lower in one OSPF process to prefer one domain over the other. I just can't quite follow the example described in this document:
    http://www.cisco.com/c/en/us/support/docs/ip/open-shortest-path-first-ospf/4170-ospfprocesses.html#twored
    Specifically, in figure 4 where two external networks - external network "N" originating in OSPF domain 1, and external network "M" originating in OSPF domain 2 - are redistributed via two ASBRs. The explanation states:
    This sequence of events could occur occur:
    Router A (Router B) redistributes M into Domain 1, and external M will reach Router B (Router A).
    Because the administrative distance of Domain 1 is lower than Domain 2, Router A (Router B) will install M through Domain 1 and will set to maxage its previous originated LSA (event 1) into Domain 1.
    Because M has been set to maxage in Domain 2, Router A (Router B) will install M though Domain 2 and, therefore, will redistribute M into Domain 2.
    Same as event 1.
    I can't quite work my way through this. I guess it must have something to do with the redistribution of "M" from domain 2 into domain 1 being learned by both ASBRs due to the lower administrative distance assigned to external routes in domain 1, and the original routes through domain 2 being deleted, but then I can't follow the rest of the description. And I can't understand why this would be a problem for network "M" in OSPF domain 2, but NOT for network "N" in OSPF domain 1.
    Any explanation gratefully received!
    Thanks, Graham

    Hello.
    You are right - whenever A and B learns about "M" from Domain 2, they craft LSA for domain 1 and inject it simultaneously. They learn each other's LSAs simultaneously and withdraw (set timer to 3600) for previous LSAs. And it might flap infinitely.
    If they don't learn LSA simultaneously (let's say that A is much faster then B), then there will be no flaps, but B would learn all Domain 2 routes (not just redistributed) via Domain 1.
    And later you will observe routing loop (when you stop advertising M from D): A knows "M" from Domain 2 and injects into Domain 1, B knows from A via Domain 1 and injects into Domain 2... so "M" stays in the routing tables due to mutual redistribution.
    You don't have similar (flap) issue with network "N", because admin distance is lower for Domain 1, so both routers would never prefer OSPF via Domain 2! But having no issue with route flaps, you still will observe routing loop if you stop advertising "N" from C.

  • Freezes when FSB is Set to 133 on AMD XP 2000+

    Im positive I have some heating problems with my computer, its running at 56C CPU and 38C System temp.s
    But the real issue is with my processor and FSB.  It all works fine when set at 100FSB but it should be at 133FSB.  When set to 133 FSB my compute crashes after so much time.  When i mean crash it either goes to blue screen if im playing games or it freezes if im just surfing the web or such.
    My specs are downbelow.  Ask me if you need more information please.  I tried to give as much as possible.

    Hi Cech
    So glad to hear that you have made real progress, from just a few minutes to your turning a stable system off at over an hour and a half.
    Now, just find out why.
    Second problem,
    On the CPU heat. My AMD is a AXDA 2500 DKV4D (part number stamped on the CPU) the V tells me my max temp is 85deg C.  The K tells me my voltage is 1.65volts.  After increasing the FSB I got a 3 to 7deg heat increase. I reduced the Vcore from 1.65volts to 1.625volts and saw a 4 deg decrease in temp. So at my 53deg temp I am way below the 85deg spec and no longer concerned about it.
    On your memory, your CPU and memory run at the same speed FSB 133, so I would lock the memory there instead of using AUTO.  Same with the CPU ratio, I would lock it at (I guess your running at X15) instead of AUTO.
    Once you know you are running stable, and have reduced the CPU heat, start pluging electrical back in (with the styem unpluged) and test the power supply, each change check the +12 volt supply. Its rated at 5%, but I would be very, very concerned if I saw a 2% change in voltage from light to heavy use load.

  • Cpu fsb clock setting?

    I bought a Microstar MS-6380E KT3 Ultra with an AMD Athlon XP 1800+ (1.53Ghz) 266FSB CPU -- it just got in today.
    I have it all set up EXCEPT for the clock frequency.  The 6380 has a default of 100mhz, up to 220.  But the AMD Athlon XP 1800+ is supposed to be a 266 fsb.
    I don't want to overclock my system -- am afraid to endanger my system when I really don't need the extra processing power.  I just want it set the way it should be.
    There's another field -- CPU Ratio/Vcore (V), w/ the following manual description for it:
    The items are used to adjust the CPU clock multiplier (artion) and CPU core voltage (Vcore).  The fields provide users a tool to overclock the system.  WARNING: Changing CPU Ratio/Vcore could result in the instability of the system; therefore, it is NOT recommended to change the default setting for long-term usage.
    I was gonna _guess_ that I set my CPU FSB Clock to 133 and input a CPU clock multiplier (ratio) of 2 (assuming I could do that).  Is that the correct way to configure this AMD Athlon 1800+ to this motherboard?  The  'CPU core voltage (Vcore)' descriptor is what is making me afraid of experimenting.  I would really hate myself if I destroyed my new cpu and/or motherboard less than 6 hours of having received it.
    Please advise.

    I doubt you can set the clock multiplier to "2" - simply it isn't available. Even if it is available and u hv not unlock your CPU, adjusting the multiplier ratio has no effect at all.
    The default multiplier for 1800+ is 11.5x. Multiply it by 133fsb you get 1529.50mhz, hence xp1800+ (1.53G).
    Don't confuse yourself, juz follow this setting if u r not overclocking:
    FSB Clock: 133
    CPU Ratio: AUTO
    CPU VCORE: AUTO

  • RAM underclocks when cpu FSB increased??? help?

    This is my first time overclocking so sorry if i sound dumb lol.
    Anyways, I have an MSI p6n Sli Platinum (retail bios), an E6420, and OCZ reaper 800 RAM.
    So my problem is;
    Just to start out, I increased the FSB from 1066 to 1070, and when I rebooted, I noticed that my RAM speed went from 800MHz to about 786MHz.
    So whenever I increase the CPU's FSB, the RAM speed decreases. 
    Could anyone tell me why, and how to fix it so I can finally OC?
    I do have the cpu and ram thing set to 'linked'. Could this be why?
    Please someone help guide me through this, I really would like some increased performance. thanks.

    Quote from: wrangler on 31-July-07, 06:55:09
    To Aaron:  This is the overclocking forum right?  I'm not here to "use what I have".  What kind of advice or help is that.  Totally inappropriate for this forum.  No one in here is under any illusions that a 1 Mhz increase in FSB is going to make a difference.  It is an example used to illustrate what is happening with the board.  mmmkay.   Thanks.
    But he/she's complaining, it's appropriate IMO. No one likes a whiner.
    If you say that you know increasing by 1FSB won't do anything, why did he/she bother doing it? Jump straight to 333FSB, set DRAM ratio to 1:1.2, CPU @ 3GHz and RAM @ 800Mhz, what's the problem with doing that?
    I also said this earlier and he/she ignored it completely:
    Quote from: AaronYuri on 26-July-07, 16:11:09
    It has to be big steps:
    333x8=2664MHz CPU clock. 1333FSB QDR
    333x1.33=442MHz (884MHz DDR), Reapers will handle this easy, then start tighenting timmings. Or set divider to 1.5:1 to get a DDR speed of 1GHz, I would recomend 5-5-5-15 timings, then tighten them down. Increase voltage only if necessary.
    Make sure you have sufficient cooling...
    And just to add, hijacking isn't nice either.

  • Whenever i press backspace, the same thing that happens when i press 'ctrl + shift + I' happens

    Whenever i press backspace, it does the same the same thing as if i press 'ctrl + shift + i', and again the same thing as if i press 'toggle tools' from the web developer option under tools from the menu at the top of firefox. I'm not a developer, i don't need this console thingy, and wouldn't mind getting rid of it. I didn't install it on purpose, and i have no idea what made this start happening recently. It's getting INCREDIBLY annoying.

    The backspace key shouldn't be opening the Console.
    '''Try the Firefox SafeMode''' to see how it works there. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode#w_safe-mode-window_2 Troubleshoot Firefox issues using Firefox SafeMode]
    When in Safe Mode... <br />
    * The status of plug-ins is not affected.
    * Custom preferences are not affected.
    * All extensions are disabled.
    * The default theme is used, without a persona.
    * userChrome.css and userContent.css are ignored.
    * The default toolbar layout is used.
    * The JIT Javascript compiler is disabled.
    * Hardware acceleration is disabled.
    * You can open the Firefox 15.0+ SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    '''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
    Or it might be caused by Hardware Acceleration.
    ''When you figure out what is causing that, please let us know. It might help other user's who have that problem.''

  • Strange problem that happens (but rarely)

    I have the AEBS. This problem happens rarely, but is annoying when it does happen. Everything will be going great when out of the blue my signal strength will get really low.
    If I try to launch the AirPort admin utility, I can't fine the base station, or it takes like 20 seconds to find it, then it pops up. When I choose configure, it will take some more time. I had to reset it a couple times with the button, which leads me to my next complaint.
    The reset button. I don't know how yours is, but on mine, I can push it, but I barely feel any button push, and last time I tried, for the life of me, I couldn't get the thing to reset. I held the button in for like 30+ seconds at one point, but didn't see the flashing lights reset like I did a few months back.
    These reset buttons, although I know they have to make them so you don't accidently hit them, should be made of better quality. Or give me a reset switch, that I can actually see is in the on position (like my Pac-Man arcade machine). The test switch is either ON/OFF. You always know what posiition it's in with a positve click.
    However this problem is rare, and the next time it happens, I'll just try shutting off the station for a few minutes.
    Bryan

    What exactly does interference robustness do? Does it
    try to find the source of interference and remove it?
    Or does it boost the signal?
    It boosts the signal (and as a result reduces the range).
    I keep my channel on automatic, and there is one cell
    phone in the house, but it's rarely used indoors.
    A cell phone is unlikely to cause interference problems, it is usually cordless phones operating on the 2.4GHz frequency.
    keep my airport on my desk, behind my iMac. Should I
    maybe move it? Again, 99.9% of the time my strength
    is at 100% and full bars. It's just that rate
    instance when it goes crazy.
    Any kind of baby monitor, media extender or anything that transmits and receives?
    iFelix

  • HOW DO YOU STOP THE ANNOYING SOUND THAT HAPPENS EVERY TIME YOU OPEN A NEW WEBPAGE?

    Every time I open a new page with Firefox I get an annoying click sound. I have gone into sounds> program events>clicked on none for Start and Stop Navigation but the sound continues. Operating System used Windows XP.
    Thanks in advance for your help,
    Regards,
    David Parker

    hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, then an addon (like noscript or autofill) is causing this - you'll have to change that in the extension's preferences...
    [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

  • HT4623 After updating my iPhone5 with latest iOS7, the rear camera became blurry. Anyone can advise to correct this problem that happened on updating of iOS7??? This was really a mesh of APPLE and they have to take immediate action...

    I tried reset of my iPhone5 but the same problem happened... Paging APPLE Support please help us with this problem of your software/hardware....

    Do you have a case on your device?

Maybe you are looking for