Annoying problem with LCD monitor and noise!!

I have MSI 6330 with 1.2 GHz Athlon (it has a built-in sound card), 384 RAM memory.
I just bought a new Cornea 17" LCD monitor with built in speakers.
When I connect the speakers to the sound card, there is an annoying static-like noise coming from the speakers, like an electric transformation sometimes causes. However, this sound is not "broadcasted" to the speakers, because even if I mute the speakers, the noise is still there, as long as there is a picture on the screen. When the monitor is turned off or shows black screen (such as during start up, or when in power-save mode) the noise disappear. The only way to eliminate this noise is buy reducing (almost to zero) the speakers volume, but then you can cannot hear anything at all, not even sound.
I got a new sound card (I thought it was the sound card problem) - same thing. I connected the monitor to a different computer and the problem is gone, which means - it is something with the computer, mobo, different device....something, I don't know what.
Any one have an idea what this could be?
Thank you.

Hi!
It could be that you have some problem with the monitor.
I have - so far - not encountered a monitor with built in speakers which gave acceptable sound anyway, the easiest solution might be that you will not use the speakers in the monitor (even the cheapest stand alone speakers will most likely produce better sound quality).
Hans

Similar Messages

Any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor ?

any one is using K8N Neo MS-7030 with 6600/6800 series with LCD monitor and his card is connected through the DVI cable without problems ?

yup, no problems here! connected to a 19" AGNeovo F-419 TFT LCD, using DVI cable. nice picture!

How to Setup LCD Monitor and ATI Rage LT Pro ? Thanks

I have already added the 109401-01 Patch to Solaris 8 (x86) , but I got
a problem , that LCD Monitor and ATI Rage LT Pro was wrong in kdmconfig,
Someone can help me how to config them? thanks

Thanks for your response.I cannot sure which drivers should be selected , I have tried the all item of ATI,LCD monitor size and resolution in kdmconfig , but it doesn't work well ,even more , I didn't see any item which shows ATI LT Pro. The system is ok, color-mapping is right ,I can see the right color (256 colors) ,but something wrong with the right block of Login Screen that was redundant on the center of normal screen. 1152x900 resolution ,which is the default resolution in Solaris.My LCD limitation is 1024x768,I don't know that might be a problem or not,could it be a problem?
Thanks.if you can send me a mail ,I can send the picture to you.
[email protected] , thanks again.

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Is someone with iMac 2010 users have problems with the monitor. I mean horizontal stripes and dark screen ?

Mine's a late '09, but there have been display issues with iMacs.
Contact Apple Service, iMac Service or Apple's Express Lane. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you're eligible for onsite repair since yours is a desktop machine.

My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

A new Mac comes with 90 days of free tech support from AppleCare.
AppleCare: 1-800-275-2273
Call AppleCare. They will help you.
Best.

I finally found out my problem with my macbook and 32inch lcd

So I dont know if you have read but i have been having a little problem with my macbook and my 32inch lcd. The problem that I have been having is when it is hooked up threw the dvi to vga going into my t.v is that when i were to close the macbook it would goto sleep. Well i have done many things to prevent this from happening and nothing worked. I have the new apple wireless keyboard and mouse. After a few post I was told to do many things like click the mouse which I had already tried about 1.1 million times. Well after I was sick of it all I just got so mad at the whole situation. I tried one last time clicking and holding the mouse button down it stayed on. I thought I was dreaming this so I then tried it again and it worked. I was having the problem of closing the macbook then waking it back upp with the mouse and the my screen which would be the 32inch lcd would just flicker a few times then say no imput. I no longer have this problem

problem solved

Premiere Pro CS4 - Problem with the monitor program.

Hi. I'm not able solving problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline and play it in the monitor program, vision in the monitor program doesn't run:black monitor or a little part of the photo appear... sometimes distort colours. Asus P5QPRO, Intel 9550 and Sparkle Nvidia GeForce 9800 GTX+ 1024 DDR3; last gpu driver and directX are installed. Different configuration of stratch disks were tested. Where am I wrong?

Dear Bill,
thanks for your answer and your article. I tried with your NTSC 4:3 720x480 PAR 0.9 and, "magically", no more problem!!! I used the script pocedure in Photoshop CS4 to resize my images. Now, before starting my workflow and hoping not to overuse your patience, I would like to indicate you my equipment and my target: I use a Canon Eos 7D (generally for still images, 90% are vertical, and just some videos) and I use Premiere Pro CS4 to burn a dvd (normal, 4.7 Gb or double side, more than 8 Gb) with a 16.9 lcd tv (I'm Italian); my camera save as .jpg and .raw (but why use heavy .raw files if I've to redute to 720x480?!??).
So, according to your "everyone wants the highest quality that they can obtain when doing theri videos..." and "your video project may vary, so you will need to plug in the dimensions for YOUR video project in that case", I've a question: which is the best for me?
And then:
1 - Premiere Pro CS4 havn't a batch or a script procedure for still image like PS (only for videos)!?!
2 - Premiere does'nt allow you to import images like 4.181 Kb (a too large dimension file error appears)!
3 - In the timeline of Premiere, after you dragged images, you can select them and right click to perform "resize to frame size": it seems to run good without problem, but what appen to the photo? Which is it's pixel?
4 - In the general preferences of Premiere you can to optimize rendering for "memory" or not: which is the best for you?
5 - I attached file with a screen of something strange in Premiere: dragging an image (the first of the project) in the timeline, the timeline appears distort (you can see the part in the yellow square): then, when I render the project and play in the monitor program, it becames normal.
Thanks!

Has anyone had a problem with no ear-speaker noise when making calls on iPhone 5? Usually work after first call

So I got my iPhone. Had problems with the screen and took it back for a stock replacement. The replacement I noticed about two weeks later that when I make calls, 80% of the calls wouldn't make a noise. I would then look at the screen and see its been answered and the seconds are counting away. I'd hang up and try again which would always work.
I've tried a restore. Twice in facts.
Has anyone else had this problem? I'm running the up to date software but think it could be a hardware problem.

Thank you so much. You have solved my problem. I never thought to click the down arrow. In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button. This one never did. I don't understand why Adobe support never told me about that when I called them.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.

Problem with two monitors while using Photoshop, windows move from 2nd screen to 1st screen.
I saved a new workspace and it did not help.
No problem before I went to Maverick.

I found the fix, go to System Preferences and open Mission Control and uncheck the box to keep monitors as they were (When switching to an application...........)

Using the GT70 with external monitor and lid closed

I wasn't sure where to post this question.
I have several laptops and use external monitors. I close the lid on the laptops and the display continues to work.
On the GT70, the system shuts down. It won't allow me to use the external keyboard and mouse or display the session.
Any suggestions if there is a configuration option to allow the GT70 to continue to function with external monitor and lid closed.

Yup. This is a windows setting. You need to go into your control panel -> power options -> "Choose when the computer sleeps" and "Choose what closing the lid does"
That should solve the problem. I currently have my GT70 hooked up to a 42" TV and I can close the lid and it stays on and the TV continues displaying as well. No problems. =]

MacBook Pro with external monitor and keyboard.

Hello, everyone.
I've tried to find the answer for this question but haven't found a clear answer with my Google search.
My older Powerbook G4 will not allow me to work with an external monitor and keyboard with the screen in a closed position. I am about to purchase a new MacBook Pro and would like to be able to use it at home with a larger monitor and keyboard but with the lid closed and its built-in screen turned off. Can this be done ?
How can a MacBook Pro be used (turned-on) with external monitor and keyboard while the lid is closed and the its screen is off ?
Thank you in advance for your answers.
Joseph

Hi Niel,
I have the same problem with my MacBook and I followed the instructions you posted. My issue is that when the computer wakes up after clicking the buttons on the keyboard it then quickly goes back to sleep. I can't seem to keep it awake when the lid is closed. I've been searching for an answer without any luck. Any idea how to solve this problem?
Thanks!
P.S. After I finished posting this message I figured out my problem. While fiddling with my computer and monitor, I inadvertently disconnected the power. After reconnecting the power, I was able to wake my computer and keep it awake. A note to other people having this issue: the computer must be connected to a power outlet to run in closed mode.
Message was edited by: qwertyphd

Really really annoying problem with slooooow Adress Book

I have a really, really annoying problem with Address Book.
Ever since I connected it with the MobileMe service it has this problem, and I just cant get rid of it. I have tried logging out and back into the MobileMe service, resetting the sync history etc., but to no avail.
Each time I open the application it freezes for about 5 to 10 seconts, then that blooming annoying, Windows reminiscent, rotating rainbow circle appears for about a minute at a time. Then it goes away and the application works..........that is until try something demanding like adding a new group or changing a group name, then it starts over. It is making the Address Book almost unusable and very un-Mac-like.
Can someone please help???

Try deleting this plist:
(yourUserName)/Library/Preferences/com.apple.AddressBook.plist
As well, the general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure your 3rd party apps are Snow Leopard compatibl

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
    try {
      ServerSocket serverSock = new ServerSocket(PORT);
      Socket clientSock;
      while (true) {
        System.out.println("Waiting for a client...");
        clientSock = serverSock.accept();
        new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
    catch(Exception e)
    { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
    this.tg = tg;
    clientSock = s;
    name= "?";
    cliAddr = clientSock.getInetAddress().getHostAddress();
    port = clientSock.getPort();
    System.out.println("Client connection from (" +
                 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
    try {
      // Get I/O streams from the socket
      BufferedReader in = new BufferedReader(
   new InputStreamReader( clientSock.getInputStream() ) );
      PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
    TouristInfo c; // this object stores info about the client
    for(int i=0; i < tourPeople.size(); i++) {
      c = (TouristInfo) tourPeople.get(i);
        c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
    out.println(msg);
      System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

Potential problem with my monitor, please help.

Hello
I recently upgraded my OSX to Mavericks and I've been having problems with my monitor, I've attached a screenshot of what is happening because I didn't know how to explain it and I'm unsure if its the OSX upgrade causing the issue or not, however I'm really worried about my monitor on my macbook pro.
The model I have is the 15" mid 2010 2.4Ghz Intel core i5 with 4GB RAM.

Still having this issue with my macbook pro monitor... There was no updates available and I followed every other possible solution, sometimes my monotor looks perfect like there was never any problem and other times my entire screen is just covered with this stuff you've seen in the above image.
I really have no idea what the exact issue is and how to solve it.
This macbook was given to me for university by the government as I have a form of dyslexia and because I've just finished my degree the insurance has ended... is there anyway I can still buy applecare insurance for my machine?! I got this MBP in 2010 so I've had it for three years now.
I'm just worried that one day I'll turn on my machine and the monitor won't work whatsoever.. and I thought apple was suppossed to be good and last a long time.
Hope somebody can help me further.
Thanks.

Problems with ListViews Drag and Drop

I'm surprised that there isn't an Active X control that can do this more
easily? Would
be curious to find out if there is - although we aren't really embracing the
use of
them within Forte because it locks you into the Microsoft arena.
---------------------- Forwarded by Peggy Lynn Adrian/AM/LLY on 02/03/98 01:33
PM ---------------------------
"Stokesbary, Michael" <[email protected]> on 02/03/98 12:19:52 PM
Please respond to "Stokesbary, Michael" <[email protected]>
To: "'[email protected]'" <[email protected]>
cc:
Subject: Problems with ListViews Drag and Drop
I am just curious as to other people's experiences with the ListView
widget when elements in it are set to be draggable. In particular, I am
currently trying to design an interface that looks a lot like Windows
Explorer where a TreeView resides on the left side of the window and a
ListView resides on the right side. Upon double clicking on the
ListView, if the current node that was clicked on was a folder, then the
TreeView expands this folder and the contents are then displayed in the
ListView, otherwise, it was a file and it is brought up in Microsoft
Word. All this works great if I don't have the elements in the ListView
widget set to be draggable. If they are set to be draggable, then I am
finding that the DoubleClick event seems to get registered twice along
with the ObjectDrop event. This is not good because if I double click
and the current node is a folder, then it will expand this folder in the
TreeView, display the contents in the ListView, grab the node that is
now displayed where that node used to be displayed and run the events
for that as well. What this means, is that if this is a file, then Word
is just launched and no big deal. Unfortunately, if this happens to be
another directory, then the previous directory is dropped into this
current directory and a recursive copy gets performed, giving me one
heck of a deep directory tree for that folder.
Has anybody else seen this, or am I the only lucky one to experience.
If need be, I do have this exported in a .pex file if anybody needs to
look at it more closely.
Thanks in advance.
Michael Stokesbary
Software Engineer
GTE Government Systems Corporation
tel: (650) 966-2975
e-mail: [email protected]

here is the required code....
private static class TreeDragGestureListener implements DragGestureListener {
     public void dragGestureRecognized(DragGestureEvent dragGestureEvent) {
     // Can only drag leafs
     JTree tree = (JTree) dragGestureEvent.getComponent();
     TreePath path = tree.getSelectionPath();
     if (path == null) {
          // Nothing selected, nothing to drag
          System.out.println("Nothing selected - beep");
          tree.getToolkit().beep();
     } else {
          DefaultMutableTreeNode selection = (DefaultMutableTreeNode) path
               .getLastPathComponent();
          if (selection.isLeaf()) {
          TransferableTreeNode node = new TransferableTreeNode(
               selection);
          dragGestureEvent.startDrag(DragSource.DefaultCopyDrop,
               node, new MyDragSourceListener());
          } else {
          System.out.println("Not a leaf - beep");
          tree.getToolkit().beep();
}

Annoying problem with LCD monitor and noise!!

Similar Messages

Maybe you are looking for