Annoying R/H side vertical scrollbar -.

Hi there,
A annoying R/H side vertical scrollbar just does not want to go away ???
I just have reset an application which I wrote in FLEX3 a while ago into FlashBuilder4 as a FLEX3 app. running on Flash Player 10 and that works OK, but I have this vertical scrollbar which does cuts into the application.
Any help is appreciated. Thanks in advance aktell2007

Hi there,
I made this Img. on a 22" screen for better viewing ! The problem is of course with a resolution 1024x768 there it cuts the application !!!

Similar Messages

Put the TLF vertical scrollbar on the left side in flash CS4

Hi, all
I’m using Arabic words on TLF so I want to put the vertical scrollbar on the left side. But I don’t know how to do it. Could anybody give me an example?
Thanks.

Hi azeem
I have been learning how to deal with arabic fonts now in flash10 and from what i have read up so far adobe has stopped updating the TLF component and it is been said it will only reappear with flash11 again. So if there is a bug with 64 bit os , then it is stuck like that for now. Another point to mention while using the forums and from personal testing is that the adobe arabic font will not handle diacritics correctly. You should try use Arial version 4 (the arial that ships with vista , the arial that shipped with xp is also faulty).
Ian Pretorius

How move vertical scrollbar to left side (for lefties on tablets)

till now in all previous ff i could easily move vertical scrollbar from right side to left. but i cant find the instruction now

Set the pref layout.scrollbar.side to '3' to place the scroll bar at the left side.
See http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

Tip: Moving Vertical Scrollbar To Left-Side

I like being able to move the vertical scrollbar to the left-side of the viewing area.
But the problem is with CSSs position:absolute and position:fixed is that if the left attribute is set to less than 20 the scrollbar will cover it up. For instance left:5px will be covered by the scrollbar.

Set the pref layout.scrollbar.side to '3' to place the scroll bar at the left side.
See http://kb.mozillazine.org/layout.scrollbar.side (default is 0: user interface)
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page.

How to add vertical scrollbar to a tree region

Hi,
I have a page containing two regions. The first is a tree region displayed on the left hand side of the page. The second is form region displayed to the right of the tree, showing details relating to the selected node from the tree.
How can I add a vertical scrollbar to the tree, so that I can I browse all nodes in the tree without affecting the position of the form? Currently, if my tree extends beyond the height of the page I have to use the page vertical scrollbar to view the bottom of the tree. This obviously means that the form is no longer in view.
Thanks
Andrew.

Hi Andrew,
You can't add a scrollbar directly to the region's contents, but you can wrap the contents within a DIV tag.
In the Region Header add in:
<DIV style="height:500px; overflow:auto">
In the Region Footer add in:
</DIV>
Obviously, change the height value to suit your needs.
Regards
Andy

Label display issue in Tree component when it is having vertical scrollbar

I am using tree component as dropdown factory for combo box. When i open dropdown, it doesn't have vertical scrollbar and all the root nodes are getting displayed correctly(in closed mode). Now if i try to open any node, i am getting vertical scrollbar as the child nodes are more. Now the problem is if scroll down, some of the nodes(labels) are not getting displayed but i am able to see the icon. If i keep on scrolling bottom to top and top to bottom, some of the nodes are showing labels and some are not(It is inconsistant).
I have not used any custom item renderer for tree control. I used my custom dataDescriptor which i have implemented from ITreeDataDescriptor. Also I tried extending DefalutDataDescriptor, but no luck.

Does it work if the tree is not in a combobox?

How do you add a Vertical scrollbar to a JTextArea?

How do you add a Vertical scrollbar to a JTextArea? This is what I've tried so far but it hasn't worked. I got that off of someone asking a similiar question here.
aTextArea = new JTextArea(10, 40);
JScrollPane scrollPane = new JScrollPane(aTextArea);
aTextArea.setText( " " );

JScrollPane(component)
this constructor will only show the scrollbar (vertical and/or horizontal) as needed..so, if the scrollpane viewport is larger than the component, then it will not show the scrollbar.
you can force the scrollbar to alway show
setHorizontalScrollBarPolicy(int policy)
setVerticalScrollBarPolicy(int policy)

MS Word 2007 insert table with vertical scrollbar?

Hi all, what is the best way when creating a word report to display a table that has alot of rows. I am wondering if it somehow possible to have a table in Word that has say 10 rows shown to the user but also has a vertical scrollbar that the user can move up and down to see more data.
If not possible, can anyone think of a solution?
Best Regards,
Grant

Thanks for the replies. Gaurav k, i was toying with the idea of using Excel but since i have many rows, it would not be the best way to create a report. My report does not have to be printed, only asved hard copy. But i do have many tables in addition to graphs etc to view and therefore being able to look at a report that is easy on the eye initially and if faults were found, the user could then look further into the tables. ie perhaps scroll through the many rows.

Vertical Scrollbar for a slide

I'm new to captivate. Can anybody help me to get a vertical
scrollbar for the slides?

Hi TrioRocks,
Thanks for your reply. It worked fine. i imported the flash
.swf file in my application but the only problem is that i cannot
edit the content of the slide after importing the flash file.

How to create vertical Scrollbar in table control?

Dear All,
How to create vertical scrollbar in table controll.?
regards,
Dharmesh

Hi
It should be created automatically, if you can't see it, try to set the field lines of table control
PROCESS PBO
MODULE SET_ATTR_TC.
LOOP AT ITAB WITH .....
ENDLOOP.
MODULE SET_ATTR_TC.
DESCRIBE TABLE ITAB LINES SY-TABIX.
<TABLE CONTROL>-LINES = SY-TABIX.
ENDMODULE.
Max

Tree control bug for vertical scrollbar

Dear all:
I meet a problem with tree control vertical scrollbar.Pls check the picture
If set the rows of the properties of the Tree control is a number, also set the vertical scroll bar is visible.
Then if i set the height of Tree is unchangeable, then set the Tree childs rows are much more than the height, The problem is that the vertical scroll bar doesn't work. The height is increase than what i have set ,Maybe it is a bug? or not.
Anybody find this?
Attachments:
Image000011.jpg ‏66 KB

Hello,
I works fine with me.
But I added my test as attachment, so you can see if you maybe doing something else.
Kind regards,
André
Regards,
André
Using whatever version of LV the customer requires. (LV5.1-LV2012) (www.carya.nl)
Attachments:
Tree control bug question.vi ‏20 KB

Change Vertical Scrollbar width in advanced datagrid?

Help!
I'm creating an AIR application that will run on windows 8 touchscreen. Problem is the touchscreen does not recognize finger swiping up/down within the air app. Haven't figured that out yet....
In the meantime i need wider vertical scrollbars for our employees fingers to swipe up and down.
I've got a 'verticalSrollBarStyle' set however it doens't seem to react to 'width = x "
Can anyone help me increase the width of the scroll bars?
thanks!

OK, this is because in a search item you can use as many wildcards as you like: 'A%b%cdef%'.
If you want to restrict the maximum length, you need to make a custom template for findTextInput.vm and add the following macro:
#ITEM_MAXIMUM_LENGTH()
Steven Davelaar,
Jheadstart team.

Vertical scrollbar does not appear

Hi all!
Here is my problem.
I have a JPanel on a JScrollPane (called: container).
I have an other class which extends JPanel (called: component).
I have a JButton which adds a new from component to container on every click. (container's layout is null, and I use the setBounds method on component).
After every adding I've just set a new height to the container (setSize(container.getWidth(), container.getHeigth()+100)), but vertical scrollBars of JScrollPane does not appear.
I tried to call the revalidate, repaint methods on the container but it did not work.
Please help me!

Which JScrollPane constructor are you using? If you're using one that does not specify scrollbar policy parameters, horizontal and vertical scrollbars only appear if the component's contents are larger than the view. You can of course set a JScrollPane's scollbar policies by calling the appropriate mutator methods: setVerticalScrollBarPolicy and setHorizontalScrollBarPolicy.

Show vertical scrollbar when 1D array only shows one element

When showing only one element of one dimensional array, only the horizontal scrollbar can be displayed. The vertical scrollbar visible option is greyed out. Even using property nodes does not make it visible. I have an array of clusters with many controls in each cluster that are aranged hozizontally across the front panel. I'd like the user to see only one element (one set of controls) at a time and be able to scroll through them using a vertical scollbar.

I think Brent's suggestion is very good. Another hack would be to cover the additional array elements with a decoration so that you only see one element.
Message Edited by vt92 on 04-21-2009 09:58 AM
"There is a God shaped vacuum in the heart of every man which cannot be filled by any created thing, but only by God, the Creator, made known through Jesus." - Blaise Pascal
Attachments:
need to scroll.PNG ‏14 KB

Tutor 14.0 Problem - Please help! Vertical scrollbar missing

I recently upgraded from Tutor 12.2 to Tutor 14.0.
When I publish the Desk Manuals for each actor, the html page does not have the vertical scrollbar, and you can't access the documents that are at the bottom of the list.
Has anyone experienced this? Is there a fix for this? I searched for patches in Oracle Support but could not locate any.
I tried to troubleshoot this by replacing the tutor.css files and tutor_script.js file with those from 12.2, but that didn't work. Is there another file that controls the output of HTML files when you publish through Tutor Publisher?
Please help!
Thanks!

Ok i am sorry about giving the wall paper here is to more precise problem
and
if you could possibly tell me a simple way of Importing a .gif file and drawing in Java.
if(rect == true)
 if(cex>=origx&&cey>=origy)
 drx[rc] = cx;
 dry[rc] = cy;
 urx[rc] = cex-cx;
 ury[rc] = cey-cy;
 rc++;
 trc++;
 else if(cex>=origx&&cey<origy)
 drx[rc] = cx;
 dry[rc] = cey;
 urx[rc] = cex-cx;
 ury[rc] = cy-cey;
 rc++;
 trc++;
 else if(cex<origx&&cey<origy)
 drx[rc] = cex;
 dry[rc] = cey;
 urx[rc] = cx-cex;
 ury[rc] = cy-cey;
 rc++;
 trc++;
 else if(cex<origx&&cey>origy)
 drx[rc] = cex;
 dry[rc] = cy;
 urx[rc] = cx-cex;
 ury[rc] = cey-cy;
 rc++;
 trc++;
 }Thx

Annoying R/H side vertical scrollbar -.

Similar Messages

Maybe you are looking for