Anonymous device configuration in CCM 3.3(2)

Hi,
I want to configurate gatekeeper in CCM3.32 but I cannot find the place to put anonymous device if I compare with previous version of 3.2. Also, I cannot associate the gatekeeper to the route pattern as well? Pls adv.

I think the ability for putting an anonymous device is removed in 3.3. In Call Manager 3.3, the mechanism for installing an "anonymous device" has been completely replaced. There is no longer any place to create an "anonymous device" , rather there is a place to configure gatekeeper and then a new menu item to create intercluster trunks that are gatekeeper controlled.

Similar Messages

  • Is there any way to disable the "Device Configuration" Screen under ccmuser options screen?

    Hi,
    I am running Communications Manager 7.1.5.31900-3 and I am trying to enable users to set their own PIN numbers. The only way I know that this can be done is through CCM (not good from admin burden) and the User Options Screen. The problem with the Cisco User Options Screen is that the "Device Configuration" screen contains a lot of options that I do not want the users to see, so I would like to be able to disable this screen and just leave the users with a change PIN screen. Is there any way you can do this?
    Thanks

    Hi Rob,
    Thanks for that I did have a look at this setting and although you can disable most settings it does not seem you can disable the "Device Configuration" section. Do you have any other ideas on how you might be able to do it or is it impossible?
    Thanks

  • Getting Error while creating device configuration (Schema Node ref problem)

    Hi,
    In MDM 2.0.1, I created the following(in order) :
    1.UOM
    2.Measuring Component Type
    3.Device Configuration Type
    4.Service Provider
    5.Device Type
    6.Device
    But when trying to Configure the created Device, its showing some error as...
    Schema node isNewCase (/schema/[includeDA F1-CommonToDoEntryData]/isNewCase) references non-existent service field NEW_CASE_SW.
    After this has happened, i couldn't even add another configuration to some of my Existing Devices..
    (But for Some existing devices, adding a new configuration doesn't throwing errors..)
    Please help regarding this...

    Is the Measuring Component Type u created is added in DeviceType's ConfigType list..?

  • Cisco Work (LMS 2.6) Device Configuration

    Hi,
    Can anyone tell me where is the default location of device configuration ( Running conf ) saved in Cisco Work (LMS 2.6) Server.
    Thanks & Regds,
    Lalit

    if you enable the so called shadow directory feature under:  Admin -> Config Mgmt -> Archive Mgmt -> Archive Settings
    then the defaut location is \CSCOpx\files\rme\dcma
    Cheers,
    Michel

  • How to reprint the Device Configuration page?

    Im installing my new printer for first time and was parially thru the wireless connection option set up and it printed off the Device Configuration Page but the page was partially blank and now I need the  printer IP address to complete the install and set up. how do I find that? where? 

    Please read this post then provide some details.  What printer model? 
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Skipping system dump : no dump device configured

    Hi all!
    I am new to Solaris, please understand. I receive the following message "skipping system dump : no dump device configured" and my system reboots. After reboot, the system repeats the initial installation.
    My IDE config:
    Primary Master - disabled (power disco'd from 8.4GB with W98)
    Primary Slave - enabled 3.8GB hdd, no format, no partition - this is the drive i want to install to
    Secondary Master - none
    Secondary Slave - CD drive that boots
    I have checked the HCL, my system is compatible.
    I have used the installer cd & disk 1 to no avail.
    Do I need to format my hdd that i want to install solaris on before i run the installer?
    if so, how?
    I have tried to create a boot disk but it failed. DD.EXE - does it need to need to be executed in a true DOS mode?
    any help would be greatly appreciated, i will monitor this thread.
    thanks!

    I was having the same proplem as u but now Im just a few steps infront.
    I found a sorta fix by searching this forum. It got me past the initial system reboots anyway. I've only installed one cd so far and now Im back cause of more problems - so don't expect it to get any easier ;)
    Anyway check out this link. It goes on about P4s but apparently other systems are affected too e.g. I have a PII.
    http://groups.google.com/groups?q=solaris+p4+setup_mca+kadb&hl=en&safe=off&rnum=1&selm=wyn1925hxr.fsf%40leo.tools.intra
    HTH from another lost soul

  • Use of device configurations - update version of mobile component

    Hello,
    We changed coded some changes in standard XMAM30. The name of this mobile component is XMAM30_LAPTOP_SR3 (type is application) with version 3.0003.
    This was added to a device configuration DC_MAM and assigned to a hierarchy. The users synced and got everything on their device.
    Now we want to give them version 3.0004 of XMAM30_LAPTOP_SR3 (which we packaged). When I want to remove version 3.0003 from DC_MAM and add version 3.0004 (also type application) it tells me that the device configuration cannot be changed anymore because of the installation sequence
    The only solution I found was to copy DC_MAM to DC_MAM_1, update DC_MAM1 with version 3.0004, the remove DC_MAM from the hierarchy and add DC_MAM1.
    Is this the way to go???
    kind regards,
    jeroen

    Hello,
    I create a device configuration and add mobile components to which I assign a sequence.
    I assign this device configuration to the hierarchy and the users then synchronize.
    Then I followed your suggestion and deassigned the device configuration from the hierarchy.  I cannot imagine that I have to search in device maintenance where the device configuration is used and delete it for every individual device...
    Kind regards,
    jeroen

  • Create button in Device Configuration

    Hi ALL
    We are not getting the Create, Delete, Copy button in Device Configurations in Mobile Administrator web Console.
    Any idea how to get the missing buttons?
    Regards
    Manish

    Hello Manish,
    Are you using SAP MI Web console, if so, then with device configurations you can configure mobile devices without being able to access them directly.
    1.Start transaction DEVICE_CONFIG.
    2.Enter a name for the new device configuration and choose Create.
    Note : Device configurations should not have the same name as a mobile component.
    3.On the Monitoring Functions tab, enter the required monitoring configurations.
    4. On the Assignments tab, enter the role you want to assign to the device configuration and thus to the monitoring functions.
    If you want to assign the device templates to individual devices or users instead, you can do so in the SAP MI Web Console. In this case, please refer to below help link -
    http://help.sap.com/SAPhelp_nw04/helpdata/en/83/36de50f796484bb8d9d8a4db850ac7/frameset.htm
    Thanks and Regards,
    Ruchi.

  • Error in Device configuration

    Hi all
    I get the following error when trying to add the mobile components to the created Device Configuration.
    com.sap.ip.mi.admin.core.ApplicationException:Field SEQUENCE_NO not a member of MEMGMT_APPLICATIONS_STR
    Had any one had this kind of problem. Please advice
    Thanks, Raj

    First of all check whether your JCo RFC provider service is configured in your J2EE engine. This you can check by going to Visual Admin. In your server, got to usr\sap\<instancename>\DVEBMGS00\j2ee\admin and double click go.bat. Then login as J2EE_admin. Go to services in the cluster tab ->JCo RFC Provider and see whether your ABAP stack is configured.
    1.If it is not, then login to NWA through your browser as J2ee admin, go to Administration->Deploy and Change-> Select MI Scenario and then select option 02 from the Template drop down list box, click on "Execute Template" Give the necessary details in the different text boxes and click install. Do the same for option 03 and 04.
    2.If your Jco RFC Provider service is already configured/or you did the above step, log into your ABAP client through SAP Logon with the User which has all sap privileges - dont use ddic or SAP*. Then goto transaction SE11 click on DATA type, type MEMGMT_APPLICATIONS_STR and click Display. Check for the field SEQUENCE_NO. If it is not there, then click on Display/Change. Here you may require an access key - ask your Basis Administrator/Consultant for the same. Add the particular field to the structure and probably....your problem will be solved.
    Edit: The type of the field is :
    Component Type: NUM6
    Datatype : NUMC
    Length: 6
    Short Text: Numerical Character Field of Length 6
    Message was edited by:
            Veeraraagavan R

  • X86 install - No Dump Device Configured

    Hi
    I tried to install Solaris 8 (x86) on my PII-300 machine with 192MB. However, when I install the Solaris 8, I don't even have a chance to create partition or whatsoever, I got an error sth like "No dump device configured" and it reboots automatically and the whole installation process starts over again after it successfully detected my hardware. Does anybody know what happen? I put my harddisk on primary master IDE with my CD-ROM drive on secondary master IDE.
    Any help will be appreciated.
    Thx.

    you need a swap partition on this machine.

  • Export Wired Device Configuration Archive in Prime 2.1

    Hi,
    we have prime 2.1 lifecycle with 50 node license. I'm trying export device configuration archive (not controllers), but I couldn't find any solution for this. now I found "controllers configuration backup" in the setting>background task menu, but this is for wireless devices(WLC). please help me where I should find the solution.
    Kind Regards,
    Neda

    Anyone ?
    ./bump

  • "No CEN system configured for CCMS monitoring" message

    Hello,
    When I want to use the reports option on central mode I receive this message:
    "No CEN system configured for CCMS monitoring"
    Can someone please guide me through this configuration?
    Thank you in advance,
    Roy

    Hi Roy,
    Monitoring Setup Guide will tell you how to setup CEN
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/43f30e51-0a01-0010-f59a-fecea2b95b2c
    Regards
    Juan
    Please reward with points if helpful

  • Safe Boot ,  Serial ATAPI Initial device configuration did not complete successfully.2

    clean install OS Snow Leopard and up to 10.6.8.
    I install Mavericks & restart computer,
    it goes to white screen with Apple Logo and spinny thing at bottom, then after about 2 minutes the Apple Logo changes to a grey No Entry sign.
    Now I use safe boot, the message is
    " Serial ATAPI Initial device configuration did not complete successfully.(failedCommandInfo = 0x1)
    Still waitting for root device"
    I can use Snow Leopard DVD startup & chooen 10.6.8 (Macintosh HD) start Disk.
    What happen to intall Mavericks of my case? Please HELP! THANKS!
    Mac Pro, Mac OS X (10.6.8)                                        

    If you want to preserve the data on the boot drive, and it's not already backed up, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data, you can skip this step.
    There are several ways to back up a Mac that is not fully functional. You need an external hard drive to hold the backup data.
    1. Boot from the Recovery partition or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
    2. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Device Configuration for Samsung Galaxy Tab?

    Longtime Flex/AIR developer here, but first time developing for Android.
    Want to build for Samsung Galaxy Tab. In Flash Builder Burrito, when creating a Run Configuration, there's a list of devices to target. But the Galaxy Tab isn't one of them. Which one should I use? Or do I just create one and enter the right dimensions etc? Is there any information associated with those device configurations besides the pixel dimensions and pixels per inch?

    Try the nearest match in terms of resolution. Also if you design your controls with relative size (%age based or relative to a fixed initial size), it shouldn't be a problem on device. There is also a blog post which may help you in writing your app: http://www.adobe.com/devnet/air/flex/articles/writing_multiscreen_air_apps.html

  • Configuration of CCMS through solution manager

    Hi,
    I am trying to do first time the  configuration of CCMS auto alerts through Solman EHP1,I mainted the satellite system in solution manager.mine environment is linux with maxdb.how to proceed for the same to start.
    Thanku

    Hi,
         Thanks for inputs.
    1) Created the  CSMREG User in Solman system
    RZ21 --> Technical Infrastructure --> Configure Central System --> Create CSMREG User
    2) CSMCONF Start File -- in Solman system
    RZ21 -->Technical Infrastructure --> Configure Central System -> Generate Configuration File for Agents (I saved the CSMCONF file)
    3)I downloaded the CCMAGENT_7-10005984.SAR file from service.sap.com ,from here onwards iam bit confusing how to proceed for the same.  (Iam having this directory in satllite system  /usr/sap/TST/DVEBMGS00/log/sapccm4x)
    Thanku

Maybe you are looking for