Anonymous Payment Error when activating new account

Hi all, I got my new PAYG SIM today and wheneve rI try and register it online I put in the number, my address and then the code that gets texted to me but when I click next I just get the message "Anonymous Payment Error" Is the EE system down or something? I've tried 4 times in the last couple of hours and with different browsers too...

I also have this error. My SIM is for Mobile WiFi and replaces one that had died through lack of use. Not sure how many times I've stepped through the "verification" process. Providing first my assigned phone number, then address details, confirming the send pin code (difficult on a Mobile WiFI device) ... always the same end result. Perhaps the most irritating thing is that the error page says something like "we're aware of the issue and are working on it". I'm certainly not convinced. There is nothing wrong with the SIM, I bought it with credit and it worked fine for the first month. Now I want to associate it with my account so that I can top up via My Account ... and no joy. I don't have phone I can put the SIM into to call EE at customer rates (my phone doesn't take the standard size). I could text 150 but that is horribly painful using my phone to access the ugly SMS interface. Of course there is no help email address or contact form! Which is why I've landed here. Very tempting to just get another SIM with credit applied already. Now, I might look up that tutorial for unlocking the device again!

Similar Messages

I get "ANONYMOUS PAYMENT - ERROR" when I try to register a new PAYG SIM?

I am trying to add a PAYG sim to my account. I fill in the detail, get the access code text and enter the 6 digit pin. I then get an error "ANONYMOUS PAYMENT - ERROR", "We're working on fxing this page" and "INVALID_INPUT". I have seen other posts with this error and one mentions that it is a problem with EE servers?

Thanks P Spier, we think this may be to do with a recent installation of Anti-Virus, my user has stated the following:
"Yesterday I copies all my pages over to a brand new file….deleted the corrupt file….and now this new file is having the same problem.
I find I can make a copy of the file on my desktop but I cannot save the same ( edited version) file…it will give me the error and then it crashes."

0FIA_DS11:Error when activating DataStore Object

Hi,
We have activated the datasources related FI_AA and replicated in to a new BI 7 system.
Currently we are able to activate the asset accounting related targets like 0FIAA_C11, 0FIAA_c12 and 0FIAA_C13
however not able to activate DSO's 0FI_DS11, 0FI_DS12 and 0FI_DS13.
We have replicated the datasources 0FI_AA_11 and 0FI_AA_12 in 3.x but while installing the DSO 0FI_DS11 and 0FI_DS12, facing below given error.
" DataSource 80FIA_DS11 does not exist in source system BIDCLNT600 of version A
Error when creating the export DataSource and dependent Objects
Error when activating DataStore Object 0FIA_DS11 "
We have checked the mysource system settings and activated the Data Marts respectively but still we are not able to activate.
System is BI 7 with EHP4 ehanced packege.
Please suggest.
Thanks & Regards,
SMS

Hi Jonas,
I understand the procedures and had followed all the procedures.
We had resolved the issue and issue was with the IP in sm59.
It is cleared.
Thanks for the reply.
Regards,
S M S

Error when activating update rule

HI BI Expert,
The original transfer rule for 2LIS_11_VAITM was deleted accidently and I created new one and mapped with the existing infosource. The system always generates the following error at the time of transport to another client.
Error when activating update rule D1GOAPD9O0P9CFOY8KBSOUDFA
Activation of the update rules for ZO_SOP_1 ZT_SOP_SALO_ITM
IC=ZO_SOP_1 IS=ZT_SOP_SALO_ITM error when checking the update rules.
Would you kindly be able to suggest me what steps I need to take so as to correct this issue?
Thanks.

Hi,
When you say that update rule was accidently deleted, was that attached to transport request and transported to your QA & PRD at that time.
Because it may happen that, your old rules are still there in QA & PRD and the new rules are failing to overwrite that.
If it is the case, then you may have to open the client for QA & PRD and delete the existing update rule (doesnt sound good practice though), and then create a fresh update rule and transport.
Rgds,
Vikram.
Rgds,
Vikram.

"Error when activating update rule" after changing ODS key

Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....

Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
   and ODS/CUBEs correct, this means that also these objects need
   to be of the same version in the source system of the transport as in
   target system.
2- Please ensure all infoobjects in the cube are active.Please
   reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
   with the grouping option "only necessary objects" and then transport
   those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete

Error when activating DataStore Object

Hello,
We have an ODS object which is in avtive stage in ECC DEV system. When
we transport it to ECC QA system it can not be activated and shows
follwoing errors :
1) Internal error occurred when writing
Message no. D0054
2) Error while saving change log for DataStore object DSO_PL
Message no. RSDODSO196
3) Error during creation of DDIC sources of DataStore Object DSO_PL
Message no. RSO435
4) Error when activating DataStore Object DSO_PL
Message no. RSO404
We also observe that even we create new ODS object in ECC QA system,
still it give the same errors while activating.
Note - ECC QA is a system copy of ECC PROD.
Please suggest.

Hi,
I believe the problem is with the Myself connection (the BW source system connection to itself) in the QA system.
Please goto RSA1, 'source systems', right click on the myself system and click on 'check', if there are errors you
maybe able to correct them by right clicking on the myself connection and click on 'restore'. If there are no
errors for the myself connection you should go to sm59 and do the connection and authorization test for the
RFC connection for the myself connection.
Best Regards,
Des.

Folder name already exists error when activating feature

HI,
I am creating a document library and adding folders to it using elements.xml in VS 2012.
First time deployment of the item works fine, the folder is created. But further deployment or activation of feature from site features is throwing the error "Folder name already exists".
Below is the elements.xml of List Instance, which was modified to add the folders.
<ListInstance Title="TestLibrary" OnQuickLaunch="FALSE" TemplateType="101" FeatureId="Guid" Url="Lists/TestLibrary" Description="TEST Library List Instance">
<Data>
<Rows>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_One</Field>
<Field Name="Title">Test_One</Field>
<Field Name="FSObjType">1</Field>
</Row>
<Row>
<Field Name="ContentTypeId">0x0120004F994A3C0FF76546A528DA0D4B515898</Field>
<Field Name="FileLeafRef">Test_Two</Field>
<Field Name="Title">Test_Two</Field>
<Field Name="FSObjType">1</Field>
</Row>
</Rows>
</Data>
</ListInstance>
How to fix this?
Thanks

Hi,
According to your post, my understanding is that you got “Folder name already exists error when activating feature”.
I had used the following code snippet to create a folder within a document library, it didn’t throw errors when reactive the feature.
<?xml version="1.0" encoding="utf-8"?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<ListInstance Title="LibTest"
OnQuickLaunch="TRUE"
TemplateType="10000"
Url="Lists/LibTest"
Description="My Lib Instance">
</ListInstance>
<Module Url="Lists/LibTest/Folder1" />
</Elements>
http://shareden.blogspot.com/2012/11/creating-feature-with-image-library.html
Also, when you redeploy the project, it will give you a dialog which would promote to delete the existed list or not.
If you click the “Resove Automatically”, the visual studio would delete the existed list automatically, and create a new list.
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

Error when activating datasource

Hello,
I am trying to create a new transaction data datasource assigned to a flat file source system. When i hit the check i get no errors but when i try to activate the activation fails with errors. The error Message No. RSO404 says "Error when activating Datasource". We are on BW 7.0 stack 12.
Has anyone seen this? It is hard to troubleshoot it when i get no real errors to go on. It is a very simple three field datasource with one characteristic, one key fig, and an additional currency characteristic. The key fig is in external format and references 0CURRENCY. Does anybody have any insight?
Thanks,
TMS

Hi TMS,
I am facing exactly the same problem here...
transactional datasource for flatfile gives me errors DO313, RSO404 and then RSDS106
We are on:
SAP_ABA            700               0011 SAPKA70011
SAP_BASIS     700               0011 SAPKB70011
PI_BASIS            2005_1_700 0011 SAPKIPYJ7B
SAP_BW            700               0012 SAPKW70012
FINBASIS            600               0008 SAPK-60008INFINBASIS
BI_CONT            703               0005 SAPKIBIIP5
SEM-BW            600               0008 SAPKGS6008
Did you manage to find a solution?

Errors when activating ODS

Hello,
i am trying to activate freshly installed ODS from business content.
it gives following errors:
RFC connection to source system BWDCLNT210 is damaged ==> no Metadata upload
Error when creating the export DataSource and dependent Objects
Please suggest...
regards,

hi Aby,
try if right click source system BWDCLNT210 'restore'
check threads
RFC connection to source system Damaged
check oss note 597326 - Activating ODS: Error when creating the export DataSource
Symptom
When you activate or transport ODS objects, the following errors appear in the log:
"The creation of the export DataSource failed". Message number RSBM 035
"Error &1 in function module &2". Message number RSBM 006
"Error when creating the export DataSource and dependent Objects". Message number RSDODSO 169
"Error when activating the ODS object &1". Message number RSDODSO 168
Other terms
RSBM 035, RSBM 006, RSDODSO 169, RSDODSO 168
Reason and Prerequisites
A characteristic involved is active but it is using new or inactive attributes.
Characteristics involved are all characteristics used in the ODS object.
Solution
Check all characteristics involved as described in the following:
Check the Compounding and Attributes tabs in the characteristics maintenance.
All characteristics here must be active. This is displayed by a green icon.
If this is not the case for a characteristic involved (a gray icon is displayed on one of the two tabs), activate the characteristic involved. This also activates the inactive dependent characteristics.
After you have checked and repaired all the characteristics involved as described above, the loading/maintenance of master data should work again.
help.

Error when activating deployment ([Deployer:149150])

Hi,
I am getting the following error when activating deployment
java.rmi.RemoteException: [Deployer:149150]An IOException occurred while reading input.; nested exception is:
java.net.SocketException: Invalid argument or cannot assign requested address; nested exception is:
java.net.SocketException: Invalid argument or cannot assign requested address
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:326)
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToTargetServer(HTTPMessageSender.java:123)
at weblogic.deploy.service.internal.transport.CommonMessageSender$1.run(CommonMessageSender.java:282)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: java.net.SocketException: Invalid argument or cannot assign requested address
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
at java.net.Socket.connect(Socket.java:519)
at weblogic.socket.SocketMuxer.newSocket(SocketMuxer.java:311)
at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:82)
at weblogic.socket.ChannelSocketFactory.createSocket(ChannelSocketFactory.java:58)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:355)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:434)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:159)
at weblogic.net.http.HttpClient.<init>(HttpClient.java:149)
at weblogic.net.http.HttpClient.New(HttpClient.java:269)
at weblogic.net.http.HttpURLConnection.connect(HttpURLConnection.java:169)
at weblogic.net.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:243)
at weblogic.deploy.service.internal.transport.http.HTTPMessageSender.sendMessageToServerURL(HTTPMessageSender.java:283)
The deployment was working fine about a couple of days back. However, we haven't been able to successfully deploy the application in the last two days.
Could somebody point me in the right direction to look?
Thanks.

It seems like you did not update the trust store of your AdminServer. It acts as a ssl client of your managed server and cannot verify its identity certificate.

Error when activating element

I'm getting an error in my transport stating "Error when activating element xxxx". Is there a table I can enter the element number to get the info object? I need to know what the element is.
Thanks!

Hi
The situation you have described is not really a problem. Usually it
is sufficient if you retransport a corresponding transport request
containing this problematic element. The new transport should return
OK status.
Please run in transaction SE38 of the target system the report
CHECK_MISSING_ELEMENTS (type in 'M' for version). With these results,
transport manually the missing objects to the target system and check
if the issue persists.
Also check the note 1030224.

Anonymous Payment Error message

I keep getting Anonymous Payment Error message whenever I try setting up my account?

Hi and ,
This issue has been reported to our technical team and is being looked into at the moment. Please accept our apologies for the inconvenience.
Thanks
James

Error when activating update rule after transporting to QA

Hi,
When we transport Info cubes and update rules along with Process chains. There are the following errors in Transport request(XXXXXXXX).
1. Error when activating update rule 22HSFD3ZMALU46LS0R8PRF2MW
IC=ZSDPCXY2 IS=2LIS_11_VAITM error when checking the update rules
2. Error when activating update rule 7NT4WIDPDCN2ERFDRXIGH95PM
IC=ZSDPCXY2 IS=2LIS_12_VCHDR error when checking the update rules
and etc.
Then we activated and saved all the erroneous update rules in another tranport request(YYYYYYYY) and again we transported alongwith the previous transport request(XXXXXXXX).
The last request(YYYYYYYY)was successfully tranported and still there are same errors in TR(XXXXXXXX).
Quick answers will be highly appreciated.
Regards,
Vijay

Hi Vijay,
Next time you would have transport only (YYYYYYYY). Transport Request (XXXXXXX) was not required to be moved.
Normally Update Rule gets deactivated in QA when any changes to the CUbe/ODS are moved.
Thus either you can transport transport request for only active update rule to QA or activate your UR directly in QA system in case you have authorization to do that.
Regards,
Rohini

Error when activating Real Time Data Source

Hi..
I created a generic datasource in R/3 system via RSO2, with the Real-time check box enabled in the settings for Generic Delta. I saved the datasource. Replicated it into BW System.
I tried to activate this Real time Data Source in BW, it says "Error when activating Data Source".
I am on BI 7.0, with PI_BASIS: 2005_1_700.
Please let me know if you need any further information.
Thanks,
Sai.

Hi sai,
Can you specify from where you have created your geneic data source like by using DB tabl/view/infoset query.
am

Error when activating an R/3 generic datasource in BW

Hi
I've created a generic datasource in R/3 4.6C system using a table view over R/3 standard Project System tables with joins. This datasource has been activated. I then replicated this generic datasource in BI7 datawarehousing environment. The replication went ok and I could see the R/3 generic datasource in RSA1. When I tried to activate this datasource I received this error message:
Error when activating DataSource ZPROJECT_ATTR Message no. RSO404
I didnt have similar problem with the other generic datasources.
I'm currently working on Netweaver 2004s BI support pack 10 environment.
Please let me know how to fix this problem.
Many thanks,
Anthony

Hi Anthony,
Do go through the note's detailed text and do listen to this advice from an old man. Do read the section below in the note and do assign some points to this geezer "lying" on his deathbed.
Quote from the note (this one rhymes..yaa):
Source system = R/3 Release 4.0B ff (all subsequent releases including 4.7 and so on)
= BW Datamart 2.0B, 2.1C, 3.0B, 3.10, 3.50, 7.00 ff
= CRM release 2.0, 3.0, 4.0 ff
unquote...
Cheers
Neeraj

Anonymous Payment Error when activating new account

Similar Messages

Maybe you are looking for