Another annoying problem.

Copying a patch in a new patch lose some assignment of the pedals. For example I have a pedal ON / OFF. I use it to switch a master keyboard sending it to two external hardware synthesizers. With the pedal released is sent to a synthesizer with the pedal pressed to another. To do this I assigned the pedal to external instrument bypass control . In one case direct and in the other negated . Well all this works in the original patch but in the copied this assignment is gone and I have to re-create it by hand.

I am having the same problem, also part way through the 3rd song. I have also looked on other forums and it seems lots of people are having the same problem. It seems not everyone gets stuck on song 3 though, I read that one person gets stuck on song 8 before it starts again. I have tried all suggestions to no avail. I have even copied 7 songs onto one track on garage band but still the slideshow music stops part way through the 3rd song and starts the first song again. I also have wondered if there is a setting somewhere that specifies the timeframe for the music set at around 10 minutes. If this is the case you would think that surely you would be able to adjust the timeframe?! An otherwise amazing program is really let down with this problem. I wonder if anyone has been able to solve this problem?
I don't know that you are doing anything wrong....maybe (gasp) what is Apple doing wrong???!?!?

Similar Messages

Just another ANNOYING problem with internet

Hello everybody !
So here we go, I am another user that has problems viewing web pages. To make a long story short I would like to add that though I am not a system administrator by any means, I am an experienced user. So if I say for example "I did nothing but the program stoped working correctly" DOES realy mean that I did nothing at all (therefore it doesnt mean that I occasionaly pushed few buttons while viewing complex settings and then forgot about it).
PROBLEM : Sometimes (randomly) I am not able to view web pages. The problem may disappear suddenly, but otherwise I have to reboot computer to solve the problem (untill it happens again. And it WILL happen withing ~30min...4 hours, so several times a day)
I USE : Macbook air 2012 (i7 8gb if it does matter). MacOS 10.8.2.   Everything is up to date, I frequently check the system for updates.
WHAT HAVE I TRIED TO DO TO SOLVE THE PROBLEM :
1) I have changed the wireless channel so that nobody around uses the same one
2) I have changed router and internet provider (well I did not change them, I just use my mba at office, at home and somewhere else. Each place has its own router (d-link at work and apple airport express at home) and its own provider)
3) I have changed mtu (maximum transmission unit) to 1453 from 1500 by default (System preferences -> network -> advanced )
4) I have tried different public DNS servers
5) I did try to request DHCP once again when the problem appears
6) The last but not least - I have tried different browsers (safari, opera, firefox)
The only thing that works yet - reboot.
MY STUPID THOUGHTS ON THAT :
- This is not a router problem, because I have already tried about 4-5 different models, including D-link, Airport and Asus
- This is not an internet connection problem generaly (I am able to use skype, teamviewer etc. while the problem occurs)
- This is not a macbook problem, because if I boot Windows (via bootcamp), it seems like I do not face that problem at all
As a result : this is a MacOS problem, and I have to look for fix inside it.
SOME ADDITIONAL INFO :
It realy happens suddenly: I am browsing webpages, everything is ok. Then bum - and the next page starts to load SLOWLY. Few more pages load SLOWLY (if there are pictures, I find "?" instead of them). And then pages stop loading at some moment. If I try to refresh the page, it might help sometimes. But then, finaly, I just lose opportunity to load web pages by any means.
The problem may go away for some time, but it will return for sure. Rebooting every time is incomfortable for me, since I have a lot of stuff opened and rearranged between different spaces (desktops).
Thank you for your time in advance guys ! Hope some of you have already faced the problem and have found the solution.
Thank you for your time guys.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag — do not type — the line below into the Terminal window, then press return:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
Step 4
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

A really annoying problem!!!

Alright guys, I got an annoying problem with my mac.
The text formatting is on many occasions all wrong like this:
http://users.pandora.be/solid_raven/vb1.jpg
Another thing is, the sound fails me, but not in itunes and stuff but only in flash files, games etc. Really annoying!
I did a complete format before but after a couple of days this came up again.
Anyone know what to do about it?
Ty!

I'm not sure about the text problem (although sometimes it can be to do with the website itself, I think), but the sound problem sounds like something that happened to me a while ago. Go to Applications>Utilities>Audio MIDI Setup and look where it says "Audio Output" - there'll be a box for "Format". Check the Hz number it says; ensure that it says 44100.0 Hz. If you find that it did not say 44100.0 Hz your problem is one of the programs you use. Some programs, e.g. Audacity (that's the one that caused my problem), change that level to one that is too high - this causes the sound problems you described. Once you've found out which program it is you can either avoid using it or change the level back to 44100.0 Hz after every use.

Since updating to 10.4 getting error message on startup 'AppleSyncNotifier.exe – Entry Point Not Found, The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'. How do I fix this annoying problem?

Since updating to 10.4 I've been getting this error message on computer startup
'AppleSyncNotifier.exe – Entry Point Not Found
The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll.'.
Please help me fix this annoying problem?
belle

This is the fix I got from discussions and it worked for me. It is copied below. I just did the manual fix which I have underlined. Good luck! Regards, Belle.
This can occur because libmxl2.dll is not in your C:\Program Files\Common Files\Apple\Mobile Device Support folder.
There have been some issues with this and other dlls not being in the right place (or not being everywhere they should be) since the 10.3.1.55 iTunes update.
However, I note that the 10.4 iTunes update is now out - surprisingly quickly - so try installing that, rebooting, and see if your issue is solved.
If it isn't, though, here's the manual fix:-
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.
I actually had the issue with SQLite3.dll, and the above fix worked for me (I found it in an April 2010 posting!).
I passed on the fix as above for the similar issue with libmxl2.dll to someone who had exactly your problem, and he reported that it fixed it for him.

Annoying problem with shift key in limit dialog Brio 6.6.4

<p>My company uses Brio Insight & Designer v6.6.4. We (meaning almost all users) are encountering an annoying problem whenadding a limit to a query using the limit dialog. When try toenter a limit value using the shift key, as in Shift T to enter acapital T, the limit value field ends up with a value like"TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT". Thisis very annoying and widespread problem with us. It seemed tostart when we upgraded to Win XP SP2. Is there a solution forother than to "upgrade to the latest version"?</p>

Unfortunately not. The only way we avoided this issue was to upgrade or write the text into a text editor and cut and paste the text into the section name box.

When mousing over text, the cursor flickers constantly (with each letter passed) from arrow to i-beam and back. The problem occurs in both MS Word and Pages. Any idea of how to resolve this annoying problem is appreciated. System: 10.10.1

When mousing over text, the cursor flickers constantly (with every letter passed) from arrow to i-beam and back. The problem occurs in both MS Word 2011 and Pages. Any idea of how to solve this annoying problem will be much appreciated. System 10.10.1 on a MacPro (Late 2013)

The mouse is controlled by the OS so don't guess any app other than a mouse driver or OS X itself would be able to cause this sort of flicker issue.
Have you seen the following and is it what you are seeing? Maybe you could make a movie (Quicktime is great for this this to make a screen recording) - but not sure how to attach a movie to these discussions as mine is grayed out and can't be selected (to the right of the insert image). Here is the what I found for a search of "mouse cursor flickers os x yosemite"
https://www.youtube.com/watch?v=ZNQ0D84DdF4
What kind of mouse are you using? Is the mouse driver up to date if it's a third party mouse?

Very annoying problem since 1-2 years with "AllSport GPS" app and e-mail "terror" - please help!

Hi there,
I have a very annoying problem that occurs since 1-2 years. Now I want to get finally rid of this.
I bought the app "AllSport GPS" via BlackBerry App World in 2010. After the uninstallation of this app due to new devices one or two years ago I have the following problem:
On each (!) update of my list in the BlackBerry World app or after the reset and reload of the content of installed app I receive 1-5 (different amount) of mails with the following content:
AllSport GPS license key for your BlackBerry
Thank you for purchasing AllSport GPS from BlackBerry App World. The license key for your device is:
XXXXXXXXXX
This is VERY annoying! I also informed the publisher of the app (Trimble Outdoors) but they told me to contact BlackBerry. During the last 1-2 years - because I often refresh and look after new updates for my apps (I have many installed on my device) - I received, no fake, hundreds (!) of this annoying mails!
I bought the app with my older 9700 or 9790. In the meantime, on my Bold 9790, the app is not available any longer for this, so it is not shown in my BlackBerry World environment. In this case I could make a new clear installation and deletion of the app. But this is not possible.
It would be great if anybody of BlackBerry is reading this and could reset or delete the resending of this mail.
Are there other other thay also have this problem? Any suggestions?
Greetings from Germany
Daniel

Actually, this is a user-to-user forum. There are some BlackBerry employees who read these posts, but in most case you are only talking to other BlackBerry users.
So to solve your question, you will need somebody from BlackBerry, as most other users will not really be able to solve the problem. If you contacted BlackBerry Support, I guess the best thing is to wait for their answer. You can try tweeting to @BlackBerryHelp, in some cases they can reply to you faster. Or you can have their attention much faster.
I find it weird myself that you haven't contacted them before, as you say the problem is since a couple of years now.
I am afraid that you will not receive a lot more information on this forum (as this is a rather specific problem in my opinion). Except maybe if one of the BlackBerry employees on this forum notices this post.
I hope your problem is solved soon!
A like is always appreciated,
but a nomination for BB Elite even more :-)
You can also contact me on Twitter: @ndsmyter

Annoying problem with View settings on new iPod

Hi folks,
I just got a new 80Gig iPod. When I connect to it in iTunes, I changed the View options to display the columns I want (e.g. bit rate, genre, date added, size, last played, etc) and I also set the width of each column. In the Preferences, I have the box checked to retain the selected view settings. When I disconnect the iPod and then reconnect later, all the View settings have been changed back to the default settings and I have to go back and change them again. This is quite frustrating and I didn't have to do this with my old iPod. Any suggestions on how to fix this annoying problem?

It's a bug that's been discussed here before. I find it annoying too that I have to keep re-opening things like "show browser".
Please send Apple a reminder to change this odd behaviour in the next iTunes release.
iTunes Feedback.

Connecting via Airport express: really annoying problem

I've got a really annoying problem that doesn't make much sense. Have an airport express and my network seems to work OK mostly. My iBook can always connect, never any problem. My eMac however is behaving bizzarely. The longer I'm connected, the worse my connection gets. Until it stops working altogether and I can't access the internet at all. System preferences tells me the Airport card is on, but is not connected to a network. Can still connect to it with the iBook.
Shut down, leave it a good while (a good while too, a short shut down doesn't do it), and it works again.
I can't even think where to start looking, all I can think of is that I have a problem with the Airport card in the eMac (something getting hot in there perhaps). Any ideas?

Thanks,
I'm pretty sure the card is seated properly (it works most of the time after all). I couldn't get it to work when I installed it because it wasn't seated properly, I pushed it in as far as it could possibly go and it has worked since (except after extended periods of use). The Airport express is three feet from the eMac with only a couple of bits of wood between them. The connection does not go down at times which I can link with the use of any particular appliances (When the eMac stops working, the iBook is always fine, even in a similar position). It is the apparently time-dependent aspect that I can't figure out (I only notice it on those, fairly infrequent, occasions when I am online for a few hours at a time). The eMac discussion group is a good tip. Ta.

Really really annoying problem with slooooow Adress Book

I have a really, really annoying problem with Address Book.
Ever since I connected it with the MobileMe service it has this problem, and I just cant get rid of it. I have tried logging out and back into the MobileMe service, resetting the sync history etc., but to no avail.
Each time I open the application it freezes for about 5 to 10 seconts, then that blooming annoying, Windows reminiscent, rotating rainbow circle appears for about a minute at a time. Then it goes away and the application works..........that is until try something demanding like adding a new group or changing a group name, then it starts over. It is making the Address Book almost unusable and very un-Mac-like.
Can someone please help???

Try deleting this plist:
(yourUserName)/Library/Preferences/com.apple.AddressBook.plist
As well, the general approach at this time is to ask if you've checked for any problematic fonts (all languages) with Apple's Font Book (look in the Applications folder). Find and remove all duplicates also.
Start there to be sure all fonts that are in play come out with a clean bill of health.
Also, don't hesisate to perform wholesale deletion of old and/or little used fonts - be skeptical of anything that has come from Office 2008, including those related to an Equation Editor installation.
By all means be sure your 3rd party apps are Snow Leopard compatibl

Really annoying problem, can't get past 'getting started' screen!

Hi,
Can't get ipod and itunes working for the first time!
Ipod is plugged in and appears in the itunes menu, click on ipod and a screen appears on the right hand side saying something like 'getting started'. The problem is that the type runs over the edge of the window (can't read all the info) and there's no link/tickbox to set up the ipod. Tried widening window but moves about an inch then stops. Is there any way to get things working without this annoying problem?
I'm trying to get this working for a friend and don't know much about Windows as I use a mac (which worked first time with my ipod!).
Any replies appreciated, Steve.
Ipod classic 80 gig/win XP/itunes 7.5

I have the EXACT same problem. I own a first generation iPod nano and I loved it so much that I bought my boyfriend the 3rd generation. I downloaded iTunes for him and everything was going great until I went to register. The screen is doing exactly what you described. You can tell there is something on the right side that needs to be clicked but you can't scroll over there to do it. I'm frustrated because he wanted to sync all his music before we started to travel for the holidays and now we can't! Please let me know if you figure anything out or find out anything. Thank you!!
FYI - I tried to register online to see if that would help but it didn't make a difference. Also, you can still put songs onto your iPod by dragging them into the iPod section but once they are there you can't manipulate them or take them back off.
Message was edited by: clp320

YAPP (Yet Another Printing Problem)

I've found another printing problem - this time with colour printing.
To my
surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
using
NT drivers for the 660C, the printer being connected to a Win95
machine).
I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?
Is this another of the 'Printing works fine as long as it happens
non-locally?'
features?
Thanks
Jamie Anstice
Programmer/Analyst, University of Canterbury
New Zealand

I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?Hi Jamie,
I wonder if this is related to the printing feature I discovered
where things I print from Forte have a strong tendency to come out in
the same colours as my windows desktop, which is
typically yellow-on-black.
- Ed
================================================================================
Eduard E Havelaar, Information Services Section, University of Canterbury
email: [email protected]
phone: +64-3-366 7001 extn 8910
fax: +64-3-364 2999
snailmail: Private Bag 4800, Christchurch, New Zealand

Creative Centrale Annoying Problem

I have a VERY annoying problem with Creative Centrale for Mozaic E3500(?)
I had videos to transfer, they transfer. Next day, I want to transfer more, but the programme, after clicking transfer and waiting 30 minutes, does not do so, and I have to go through and uninstall and reinstall, which takes AGES, it before I can do so?
WTF Is going on with it's

I have the same problem except with wmp so you're not the only one...lets hope someone posts something good

Invitation replies-annoying problem

When I change the status of an "invitation" event that I have placed on my calendar to "accept," the color of the event remains gray unless I email my acceptance. I don't want to email acceptances in most instances. Any way to address this annoying problem?
iBook G4 1.42GHz Mac OS X (10.4.4)

Hi,
I had a poke around on my system and even though the event is shown as being in a certain calendar it is actually stored somewhere else until it is accepted. The colour comes from being within a calendar. As an example uncheck all the calendars in your calendar list, the un-accepted event will still be there.
It may be better for you if the sender of the invitations Control-Clicks the event and chooses 'Mail Event' instead of using the email invitiation process.
Best wishes
John M

My Wi-Fi works, but after a while not anymore. Then I've to turn of on the Wi-Fi and turn it on after a few seconds. Can anybody help me with this annoying problem?

Hello,
My Wi-Fi doesn't work good. After a while it doesn't work and then I've to turn of the Wi-Fi and turn it on after a few seconds. Does anybody has this same annoying problem?
Jelle van Blokland.

Hi Jelle van Blokland,
Here is an article that has troubleshooting for Wi-Fi connections in iOS, including disconnecting:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Cheers!
- Ari

Another annoying problem.

Similar Messages

Maybe you are looking for