Another Art/Graphics query

Podcast has been in the iTunes store for many months. The main Podcast page shows the <itunes:image> graphic, but my Podcasts subscription page does not. Furthermore, I recently noticed another Podcast showing artwork in my iPod, and ours does not do that either. Comparing to that other Podcast, I can't seen any relevant difference in my feed.
Feed checks out with the w3c validator (other than not having the atom self reference, but I just recently took that out to see if it was the cause of the problem).
I've recently changed the image from png to jpg just in case that was the cause, but it doesn't seem to have made a difference.
http://itunes.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=308067537
http://trinityfellowship.net/podcast-rss.xml
Thank you for any assistance.
Doug

The image you see on the Store page is the 'Podcast Image', referenced by the 'itunes:image' tag in the top section of your feed: it's related to the entire podcast.
When you subscribe and look at the list in iTunes you select individual episodes, and if they have an embedded image then that is what appears - it can be different for each episode. The 'Podcast image' does not appear in list view.

Similar Messages

  • Adobe Photoshop Elements 12 Clip Art/Graphics

    Hello,
    I am taking an on-line digital scrapbooking class at my local community college.  We are using Adobe Photoshop Elements 12.  I have been trying to get help so that I am able to see the clip art that my class is using.  Yesterday before I uninstalled and then reinstalled my software, I could see the clip art/graphics but the ones with a blue triangle in the upper right corner would not upload.  My internet is working properly since I was on-line for my class.
    After reinstalling my software, all the clip art/graphics are useable, but I do not have the collection like before.
    Please can someone help me so I can keep up with my class.  Thank you in advance for any help that comes my way.
    Thank you again,
    Angela

    Barbara, thank you very much. I really miss it. I have tested jalbum. It's great.
    PSE 12 should also offer something like this.

  • How do I get and pass Master-Detail rowid to another form in query mode?

    I am trying to get the rowid of my master record passed to
    another form in query mode. This is necessary because, I need to
    have a way to show other detail tables for my master record. I
    have been successful in calling the other forms, but only if I
    hard code the rowid(or Primary Key).
    Ultimately a "Tabbed" HTML table for each supporting detail
    table that I have would be perfect. Any help would be greatly
    appreciated. Thanks.

    correct me if I am wrong, is this a 9iAS (Application Server)
    related question? This forum is for 9iAS only.
    Regards,
    --Tao

  • Calling another form in query only mode

    Dear all,
    Please clarify me which parameters to use while calling another form in query only mode in
    fnd_function.execute.
    Regards,
    Kiran

    Hi,
    According to standard doc:
    When you define a form function in the Form Functions window or call an existing form function using FND_FUNCTION.EXECUTE or
    APP_NAVIGATE.EXECUTE, you can add the string:
    QUERY_ONLY=YES
    to the string in the Parameters field or in the arguments string (using the other_params argument). This argument causes the form to be
    called in query–only mode. The FND_FUNCTION.EXECUTE procedure (which is also used by the Oracle Application Object Library
    Navigator) sets the QUERY_ONLY flag that sets all database blocks to non–insertable, non–updatable, and non–deletable.
    Hope it helps.

  • FRM-40654 Record has been updated by another user.Re-query to see change.

    Hi All:
    While Updating a record in form its updating fine at first time
    if i updating the record second time its not allowing me to update its showing following error
    FRM-40654 Record has been updated by another user.Re-query to see change.
    After Re-querying its allowing me to update the record .... so anyone can give a good idea to update the record without Re-query.
    i am using following versions
    Apps 11.5.10.2
    Forms 6i
    Database 10g

    @814950,
    Welcome to the Oracle Forums. Please take a few minutes to review the following:
    <ul>
    <li>Before posting on this forum please read
    <li>10 Commandments for the OTN Forums Member
    <li>Announcement: Forums Etiquette / Reward Points
    </ul>
    It is not good to use someone else's post to ask a new question; this is commonly refered to as "Post Hi-jacking." It is always best to create a new post and add a reference link to a similar post. Please create a new post for your question!
    Also,
    >
    BEFORE I NSERT OR U PDATE
    OF quantity, price_override
    ON po.po_line_locations_all
    >
    If I recall correctly from when I worked with the Oracle Enterprise Business Suite (EBS), the PO_LINE_LOCATIONS_ALL is an EBS ta ble. Oracle does not recommend you modify EBS tables directly. There are recommended methods for performing DML on EBS tables. I suggest you review the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
    <ul>
    <li>Oracle Applications Developer's Guide
    <li>Oracle Applications User Interface Standards for Forms-Based Products
    <li>Oracle Application Framework Personalization Guide
    </ul>
    Again, please ask your question in a new post.
    Craig...
    Edited by: CraigB on Dec 1, 2010 9:29 AM

  • Thank you Allan Sampson, your answer to another person's query solved my dilemma :-)

    Thank you Allan Sampson, your answer to another person's query solved my dilemma :-)

    i am also have the same thing how can i get they out from my game center ?

  • What is the best Mac choice for creating pro-level art/graphics/animation?

    I'm an artist who does a lot of work with Adobe Creative Suite CS5, as well as some video editing and lots of animation. I've been using a 2007 model 15-inch Macbook Pro for the last 4 years, and it seems like it's time to upgrade...it runs burning hot all the time, and the battery dies pretty quick when the cord falls out. It seems like the whole thing is running a little slow, which is probably because I have a TON of graphics/animation/video software on there, but I need each and every program.
    My question is, what is the best new Mac to purchase to replace this one? I want to make sure it lasts as long as possible, and will be able to handle the programs I use now. My first thought is to get another Macbook Pro, because of the portability, and just add on all the higher RAM, etc to customize it. But my husband suggested looking into the Mac Mini, because it's a lot cheaper, and we're a little strapped for cash at the moment. Would that serve the purpose? Or is a Macbook Pro really the best choice for what I need it to do?
    I'd love to hear suggestions from other artists or graphics people. What do you recommend?

    For a "cash strapped" person, unless you already
    have a monitor, one of the new iMacs may be
    a better choice.  If you do have a monitor, I would
    suggest the dual core i7 equipt MacMini.  Since you state
    you are using CS5 stuff, most Adobe apps,
    Photoshop for example, do not make effective
    use of multiple cores.  Also, using any of the
    Adobe products, regardless of which computer
    you decide on, get as much RAM as you can afford.

  • Another NVidia graphics problem (8800 GS) - late spring 08 imac

    I have a spring 08 aluminum imac (24", 3.06GHz, 4GB RAM, 10.5.7)
    The graphics card is an NVIDIA GeForce 8800 GS w/ 512 MB VRAM
    I get sporadic strange graphics failures seemingly at random intervals. They started around the time I upgraded to 10.5.5 (or maybe 10.4.4... can't recall) back in December, but that could be coincidence. They do not seem to be tied to use of any application or user action. Since they started in December, I have gone months without them, and had them occur 5 minutes apart. They've hit me a half dozen times in the last 3 days.
    Here's what happens:
    The screen appears to flash once
    The computer becomes unresponsive (usually w/ spinning beachball)
    If activity monitor is running, the CPU stays at a low use %
    Sometimes the dock icons pixelate and/or turn yellow
    Occasionally the desktop icons seem corrupt/pixelated
    The desktop background is unaffected. If iTunes is playing it is unaffected. The mouse moves the pointer with no sluggishness or lag, though clicking is usually ineffective (can have either standard pointer or spinning ball)
    Using iStat, the GPU immediately after a reboot is ~52 deg and the GPU Diode is 59 Deg. The top of the machine is very warm. I can hold my hand there indefinitely, but any hotter and I would not be able to. The CPU fan is running at 1300rpm, hard drive at 1500, optical drive at 700.
    Tech tool Pro 5 video memory test shows no problems.
    Sometimes the machine appears to recover somewhat, but then I get another "flash" and the symptoms repeat.
    If I pull up console, I get a host of error messages along the lines of:
    7/14/09 8:41:18 PM kernel NVDA(OpenGL): Channel exception! status = 0xffff info32 = 0xd = GR: SW Notify Error
    7/14/09 8:41:18 PM kernel 0000000c
    7/14/09 8:41:18 PM kernel 00200000 00008297 00000472 00000000
    7/14/09 8:41:18 PM kernel 0000047e 00001b0c 1000f010 00000003
    7/14/09 8:41:18 PM kernel 00000000 00000000 00000000
    7/14/09 8:41:30 PM kernel NVChannel(Display): Graphics channel timeout!
    7/14/09 8:41:42 PM kernel NVChannel(OpenGL): Graphics channel timeout!
    7/14/09 8:41:54 PM kernel NVChannel(Display): Graphics channel timeout!
    Typically, the only recourse is a hard reboot holding the power button.
    I fear I screwed myself, as even though the problem started in December, it had gone "dormant" in early spring, and I let my 1 year warranty go past without getting extended applecare. A call to apple care yielded only a "bring it to a genius bar and they'll have a look" but given the sporadic nature of the problem, I doubt I'd be "lucky" enough to get the error.
    Can anyone offer advice as to:
    What the heck is going on
    Whether this is a common enough problem that I can badger Apple into fixing it out of warranty
    If there is anything I can do to remedy the problem myself
    What I can expect to pay for a repair

    Typo - should read : "They started around the time I upgraded to 10.5.5 (or maybe 10.5.4... can't recall)"

  • Processor and Graphics query for G4 PowerMac 'Digital Audio'

    Hey all, two questions here...
    Question 1
    Ive got ANOTHER new processor and graphics card for my Digital Audio G4. The processor i had in it before was a Sonnet Encore ST/G4 1GHz, ive replaced this with the same make of processor but at 1.4GHz. The processor works fine and the machine runs fine, but it isn't listed properly in the system profilers...
    In OS9 it's speed is described as "about 656Mhz" and in OSX its described as 0MHz!
    Im not too worried since everything seems to be working fine, but i want to be sure that its not going to suddenly blow up on me, and if anyone else has had things like this happen with these processors or configurations. Ive still got the 1GHz should anything go wrong, but newer, more powerful stuff is always good!
    Question 2
    The new graphics card i put in is a ATI Radeon 9600 Pro PC & Mac Edition. Ive read a few things on the internet about it sometimes not working with DA Power Macs but thought id chance it anyway, i can always sell it on if it didn't work...
    Well the card works in both OS9 and OSX and displays everything fine, its recognised by both systems and everything. The only problem is i can't change the display settings, on both systems the only display option ive got is x736 (or whatever it is thats closest to it), there are no other options available, i can't choose anything else in the Recommended menu, not can i change from Thousands to Millions of colours.
    Of course its generally agreed that these cards work better on G5s than G4s, despite it saying on the box that it supports G4s. Ive also downloaded the ATI Displays Control Panel to see if i can control it that way, but to no avail. Does anyone have any info or words of advice on this?
    Cheers all!

    Good to hear, thanks!
    Do follow the advice to add as much cooling as you can, & use the best Ceramique Thermal Paste you can find.
    Did you clear all the Caches yet?
    At this point I think you should get Applejack...
    http://www.macupdate.com/info.php/id/15667/applejack
    After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
    applejack AUTO
    Then let it do all 6 of it's things.
    At least it'll eliminate some questions if it doesn't fix it.
    The 6 things it does are...
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
    Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
    Just sits there occupying very little space & never interfering, unless you need to invoke it in Single User Mode.
    Look for the 10.3 version of AppleJack 1.4.3.1 (326 KB) (For Mac Jaguar and Panther), here...
    http://mac.oldapps.com/applejack.php

  • Yet Another ADS related query

    Hi,
    I understand there are lots of examples related to Active Data Service over the internet. But my query is a bit specific.
    If I want to include a (Real) data source instead of faking it through Threads, what would be inside the following methods.
    void startActiveData(Collection<Object> rowKeys,int startChangeCount){}
    void stopActiveData(Collection<Object> rowKeys){}
    Any sample (runnable) code would be much much appreciated.
    Thanks in advance!

    Timo Hahn wrote:
    Well, me be you don't get answers as you don't give enough information to work on. Your question is a bit ambiguous, and you did not even give your jdev version.
    TimoOk, let me put my query in another way.
    I just want a sample code to be written inside the following two methods.
    void startActiveData(Collection<Object> rowKeys,int startChangeCount){}
    void stopActiveData(Collection<Object> rowKeys){}
    wrt to this link http://download.oracle.com/docs/cd/E21764_01/web.1111/b31974/adv_ads.htm#CIHDIGID where these methods are not implemented. (they have commented out like "// Not needed. We do not need to connect to a (real) active data scource."). Can I have a sample method implementation with "real" datasource?...
    vinod_t_krishnan wrote:
    will this be helpful
    http://www.orastudy.com/oradoc/selfstu/fusion/doc.1111/e15524/uc_async_dynamic.htm
    http://prsync.com/oracle/building-a-real-time-twitter-client-with-oracle-adf-18495/
    Thanks for the links but i've already gone through them, but doesn't cater to my need.
    Regards!
    Sorry forgot to add I'm using jdev 11gR2.
    Edited by: adf_user on Aug 26, 2011 3:50 AM

  • Art Package Query

    Hello
    Could not find a forum section for this so seeing as I use a Mac Pro I posted it here.
    I would like to buy a decent art package for my Mac Pro running Lion.
    I looked at Adobe Photoshop and then see the Price O.O
    Seems the only version that I could afford is the Teacher Student version but I am
    neither
    Any advice on how I could get an affordable version of Photoshop or something along
    similar lines that I could afford ?
    Thanks.

    Look at these:
    http://sixrevisions.com/graphics-design/10-excellent-open-source-and-free-altern atives-to-photoshop/
    http://www.readwriteweb.com/archives/free_alternatives_to_photoshop_with_all_the _bells.php
    If you just need PS actions, get Gimp.
    For vector based illustration, check these:
    http://smashinghub.com/12-great-alternatives-to-adobe-illustrator-for-designers. htm
    Lineform is nice, easy to use.

  • Another question about query execution speed.

    I know I should normally start with posting the query but my question will take a little different direction, so here is the deal:
    We have an Apex application, there is a query on one of the pages that for certain users takes quite long, lets say 1min to 2 min, depending on how many records the query returns. The actual query varies depedning on some security settings and other parameters on the page - it's constructed by pl/sql function returning sql.
    By querying v$sql I get the exact sql run by the user for who the query takes long time to execute.
    Then I run that same sql statemt in Toad and it always takes 2 seconds to execute. For the user executing the same sql from Apex takes consistently 50-100 sec. My Toad is set to return up to 10,000 records and the query returns less than 500.
    Can somebody help me make some sense of this?
    George

    Hi there
    geo2 wrote:
    We have an Apex application, there is a query on one of the pages that for certain users takes quite long, lets say 1min to 2 min, depending on how many records the query returns. The actual query varies depedning on some security settings and other parameters on the page - it's constructed by pl/sql function returning sql.To render a page, Apex does much some more stuff than just run the query. For instance, depending on the type of pagination you have enabled it needs to get the total number of rows to display "x to y of z" (or to display the message "more than nnn rows found"). Have you enabled debugging in Apex to be sure that most of the waiting time is spent on that query?
    By querying v$sql I get the exact sql run by the user for who the query takes long time to execute.
    Then I run that same sql statemt in Toad and it always takes 2 seconds to execute. For the user executing the same sql from Apex takes consistently 50-100 sec. My Toad is set to return up to 10,000 records and the query returns less than 500.Does Toad takes only 2 seconds to retrieve all rows or just to get the first top rows?
    Luis

  • Default value from another table - sql query

    I'm trying to make the default value of a text item as the result from an sql or pl/sql statement. I keep getting errors when I try to use a pl/sql statement to do this. Has anyone else done this?

    OK, here is what I tried to put in. I have a form and I wanted to add a text field that is derived from another table, such as:
    select question from qa_main where seq=:quest_num
    So, what I want is to have a form where questions on tests are answered, and I want the text of the question to be brought over from the question table. I'm not sure if I'm using the correct syntax, but the ":quest_num" would be a reference to a question number in the answer table that is linked to the sequence number (primary key) in the questions table.
    Of course if there are better ideas, please let me know. :)

  • Best Free Clip Art/Graphics for Macs

    Hi all!
    Any recommendations for trustworthy free clip art for Macs for newsletters etc.... I only need them every once in a while.... like say images of college, people studying, ESL etc...
    Thanks!!!!

    free clip art
    https://openclipart.org/
    for photo edits/ touch ups
    FOTOR on the APP STORE,  awesome and free.
    https://itunes.apple.com/us/app/fotor-photo-editor-photo-effect/id503039729?mt=1 2

  • Simple Graphic Query Tool

    Does Oracle provide any free query tools (like MS Query) that I can use to open and export tables as well as build SQL strings?
    MB

    HTMLDB.

Maybe you are looking for