Another battery issue, please help

Okay, Got my iphone 4s october 30th for sprint, and i had absoulutely no isse with battery even before the update, could go a few days without charging. But since saturday its been terrible, and doesnt veen last a day, and I noticed that in my stats my usage is matched closely by my standby time, which does not make sense at all, so something in the back ground is running. Here is what i have done to try fix
Turn of time zone , didnt work
reset location info, didnt work
reset all settings, didnt work,
completely wiped and restored from back up, didnt work
This just start happening this past saturday, and im am currently on the newest ios 5.0.1
please help

Some Users have Reported that a Restore as New has helped Resolve issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Similar Messages

Zen 2GB Battery Issue - Please help!

$? I bought two Creative Zen 2GB as their battery life is up to 30 hours. I have a Microsoft Zune and it gets the 4 hours listed but both of the Zen's only get 0- hours per full charge. I fully charge, then run the recovery tool and run disk clean up, format, new firmware. I then add all mp3's at 28 bitrate, EQ off, bass off and keep the volume on 3. In the setup I the brightness down as far as it will go at 0%, I think you should be able to set it to 0%. But what am I missing to only get 0-2 hour max on these two new units? I recently read about Idle shutdown, but yesterday I charged the Zen 8 hours to be sure, then with all the optimal settings I cut it on at 0pm and let it run througout the night and at 9am it had very little charge left...please help with any ideas/suggestions as I just get links from Creative tech telling me things I am already doing.
Mickey

Micktarheel wrote:
Excellent, thanks for the replies and I read about the lock function online but it said for 4GB and up I think, but not 2GB. I thought, even with the screen at the lowest, 0% that it was too much lcd and a battery drainer...thanks!
Yes, I have the 2G ZEN player and it does have the "lock function" (often on the Creative's web site they neglect to mention the 2G) - I "lock it" every time I listen to my audio books. By using this function it "closes" (blackens) ?the LCD screen and saves the battery considerably.
When I first bought this player it was the first time I had an internal battery, all the other ones I had used -AAA battery. I was hesitant about using the type of battery in the ZEN player but I can listen ALL day and ALL night and still have battery life left. Then I recharge the battery in the wee hours of the morning, ready to listen to more books and music that day.
Just some thoughts,
katdesigns

Battery Issue.Please Help

I have a Xpeia go and I'm facing the wierd battery issue.using the phone while its charging is good,but as soon as i disconnect it from the charger,it hardly remains ON for 1 minute and it switches of and then when i try to switch it on,the red light blinks and then after connecting to charger,it boots(sometimes it boots then again switches off)and then say it has 18% charge ,after 5 mins it will show 100% charge and if i took the charger off ,again it switches OFF after1-2 minutes... So is my battery defective?should i Change it..I saw a battery for Xperia GO in1200 at ebay.. Service centre workers says that they will take Rs.6500 and will give me new Xpera Go.What should I do?

You might need a new battery or it could be another hardware issue, contact your local Xperia Care to get your phone inspected http://support.sonymobile.com/global-en/contactUs/

HP DV7-1020US (Power supply/battery issues) Please help diagnose!

Hi everyone,
I've read a lot of forum information about power issues/problems with this model laptop.
But have finally decided to post this question up here for some real HP support.
The problems started with the battery not being able to hold a charge. Shortly after, my brick started making a strange beeping
noise. I purchased a matching brick. I was able to get a few good minutes of charge and then every time after the laptop wouldn't power-up
at all. I'd just get flashing lights on the front (HD, Lightning bolt, Power). The lights would stop blinking after resetting the battery. I did some
research on laptop batteries and found that not allowing it to drain and then be recharged could cause it to go bad.
I purchased and received my new battery in the mail today. I am currently in the process of charging the new battery but have noticed
that the little lightning bolt light in the front of the laptop is NOT lighting up as it should when it's charging.
Is it NOT lighting up because both the battery and brick are after-market products?
I am going to allow the laptop with the new battery and brick to charge for 16 hours without attempting to turn it on.
I'm concerned that the system board or internal power supply might be having problems as well.
Has anyone encountered these type of power issues with this particular laptop?
Should I be able to run the laptop without the battery? That option has not worked for me.
Any assistance/guidance from you pro's out there would be greatly appreciated.
Thanks!
JUST WANTED TO ADD:
Laptop has been charging with new brick and battery for 8 hours straight and now, the battery indicator light is blinking.
I've tried removing the battery and reseating it but as soon as I plug the power back into the laptop the blinking begins again.
Message Edited by pixelitis on 11-02-2009 10:56 PM

Hi people!
I started having the same problem with my 1020us. Battery isn't charging (it's 91% available, when the battery reaches 35% the laptop power-off). The battery led in front panel blinks too when laptop is plugged in to AC adapter).
Another problem with HP. I am so disappointed. =\

Another battery Question - Please help!

Ok, this is probably going to be a dumb question, but I might as well ask it...On the 30GB Video iPod- it says up to 14 hours of play, when it comes to battery life. Now obviously, I think that means, if you leave your iPod on and not turn it off, it will last 14 hours as far as playing music is concerned, right? I only ask because I use my iPod at the gym and what I do is play music from one playlist, have the backlight set at 2 sec., EQ is off and then play the music on the playlist for 1.5 hours until my workout is done. Then, the next day, I do the same thing. I've noticed that over 5 days, playing my iPod while I work out for 1.5 hours per workout, the battery lasts for about 9 hours total. Does that sound about right? Basically, I'm wondering if my battery is defective or not. Should it last 14 hours total before it needs to be re-charged?

Well, I do go by the meter, but actually, when the meter is in "red," it lasts me about 2+ hours. When the iPod completely dies, as in music stops playing - I try to restart it, but nothing happens, so I guess my iPod at that time truly does "die out" as far as battery life is concerned...
But I guess what I was originally asking is this: the first time I charged my iPod, I charged for 5 hours. Then, I took it to the gym, played a playlist for 1.5 hours and then turned it off for the night...I did this same routine for 5 straight days. Then, after 9 hours of total play, *i.e., 1.5 hours x 5 days/5 workouts = 9 total hours before the battery died. Is this normal? Or am I suppose to get more life out of my battery?
Thanks again for your help!

Mid 2010 15" MBP i5 A1286 POWER ISSUE-PLEASE HELP-

The MBP works fine when mains connected but the only issue is every time I take the charger out it shuts down on me!!! So I have checked with a multitester & looks good the only thing i find hard to check for power is the battery itself as its hard to get a good connection, also I took to local Apple store & they checked with a new battery but said its still same issue so the guy disconnected nearly all the connecters off to check if they causing issue & he said now the battery is charging.
So they still have the laptop to do further tests etc, but I’m not sure what could be the problem hear as maybe there is some component which is bad so the battery’s not charging or what else could be the issue please help & advice as I’m really confused as if it was something to do with the logic board then surely it would not even charge even after checking with the multitester or like Apple genius done by disconnecting other components...
ANY HELP OR ADVICE WOULD BE HELPFULL,
THANKS GUYS

THANKS FOR THE HELP GUYS!!! BEEN AROUND 5 DAYS & NOT ONE PERON HAS HELPED...
BUT YEAH THANKS AGAIN...
WASTE OF TIME THIS IS...

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

My phone 5 died and now it wont turn back on or seem to charge at all. I've tried several different charger cords and outlets. And all the phone will do is show the empty battery symbol. please help! Any suggestions are apprecaited!?! thanks

Hello Cooper,
Thank you for the details of the issue you are experiencing with your iPhone 5. I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

I want to bring over music from my iTunes library on iMac to an ipod touch with another apple id. please help

I want to bring over music from my iTunes library on iMac to an ipod touch with another apple id. please help. Is this possible. In former versions of itunes this was posible. I can't find the solution is iTunes 11

Perhaps those apps require a newer version of iOS than is compatible with your iPod.

Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

Using my macbook pro whole day with the power adapter , will it affect my battery? Please help

It doesn't affect the battery. You can use your MacBook Pro plugged in all the time without damaging the battery. You only have to be sure that you unplug it and run a battery cycle (drain the battery without letting the Mac turn off and charge it fully) at least once a month to keep the battery life.
If you want more information about your battery > http://www.apple.com/batteries/notebooks.html

Trackpad Issue - Please Help!

Hi there,
Hope you can help me out here.
I've recently purchased a 15" i7 Macbook pro. The machine is but 3 weeks old &, of course, very well looked after.
A few days ago, the built-in trackpad started behaving eratically. Cursor moving by itself, not responding to touch, clicking and opening things involuntarily. Not good at all. Many users seem to have had this exact same issue.
These problems seemed to miraculously stop after a few re-boots and possibly a software update? I really couldn't tell you what resolved the problem.
Unfortunately I now have a totally different problem.
There is a thin, possibly 8 to 10mm horizontal strip across the centre of the trackpad that no longer responds to touch. If I move my finger from the botom of the trackpad upwards (or vice versa), the cursor will stop momentarily as it passes over the horizontal strip. The buttons are fine and the rest of the trackpad is fine. For the moment, I've increased the cursor acceleration so that I can at least navigate round the screen with a smaller area of the trackpad. USB magic mouse seems to work fine.
If anyone else has experienced this &/or found a solution for this issue, please help me out here. I have rifled through endless threads about MBP trackpad issues with little success & do not live close to an apple store/genius bar.
This is a 3 week old machine that cost me a small fortune. To be getting software/hardware issues so early on in it's lifespan is really rather worrying for the future.
Appreciate your help here.
J

I'm not sure what caused this, but I extended my lunch break and drove the machine down to the Westfield apple store. I didn't have an appointment with the Genius Bar but I managed to persuade one of the staff to speak to a technician in the workshop. She came back into the store and told me that they had replacement trackpads and that , considering the machine was only 3 weeks old, the technicians kindly sandwiched the repair into their timetable at zero cost. 2 Hours later, I now have a perfectly functioning trackpad/machine.
I can't thank them enough.
My only gripe is that I couldn't speak to a technician to find out what the problem was, how they resolved it or what causes these issues for future reference. Understanding why these problems occur often helps to build your own framework of understanding. Most of the threads i've read about trackpad issues are largely unresolved with people only speculating the problem/solution.
The initial issue I had with the trackpad's erratic behaviour seemed to be a well known problem that many are associating with a trackpad firmware update. Unless by pure coincidence I had an immediate & major hardware fault after it, which is unlikely, my personal guess is that the two issues were related.

Transport Issue Please help

Hello,
I have got a major prolen during transport.
I have GEMPLOYE1 Which is a time dependient master data. which has Attribute called 0COUNTRY_ID.
I have a custome attribute Called Actual PSGroup/Grade GPAYSCGR which has a compounpunding attribute 0COUNTRY_ID
Now when I am trying to transport PSGroup/Grade GPAYSCGR to QA that transport is failing , the log massage is
Characteristic GEMPLOYE1: Attribute GPAYSCGR compounded to 0COUNTRY_ID has a diff. time-dpdncy
If any one saw this issue, please help me to fix the same.
Samit

Hi Venu,
We can't add authorisation objects on Individual servers.We need to add authorisations on BWD ie Dev system and transport to BWI QUA system.This is the Process we need to follow as per our rule set.
So,As the problem mentioned above if i add some auth. objects on BWD DEV system and transport it to BWI QUA system,it is getting transported Successfully to BWI,but the auth.objects what i have added on BW DEV system is not found on BW QUA system.
What could be the problem for that,Is that the problem with transports like TP error or is it related with some tables of auth.objects...................
Could u please analyse the problem and tell me the solution for this..........
Thanks Much
Swapna.D

Headerrenderer issue -Please help

Headerrenderer issue -Please help
hi
I have a datagrid and I am doing a custom sorting on the grid(by getting data from DB).
I achieve this by capturing the headerrelease event of datagrid .In thee venthandler I will query from DB and do event.preventdefault to prevent standard grid sorting.
Now I need to display my own custom ascending/descending arrows in the header.i have created an header renderer for this,
In the headerrenderer I am lsitening to the headerrelease event of datagrid and in the eventlistener, as per the sortfield, i am trying to make the sort arrow visible/invisible.
But somehow making the sort arrows visible/invisible is not working.The initial arrow works fine.it is shown the correct column(Name) as done in the init() method.
The eventhandler is invoked on clicking the column headers and all the alerts are shown.
Please see the headerrenderer code below and help me.(code is not complete only the relevant part is included)
<?xml version="1.0" encoding="utf-8"?><mx:HBox
xmlns:mx="http://www.adobe.com/2006/mxml" width="100%" height="100%" horizontalScrollPolicy="off" creationComplete="init()" implements="mx.controls.listClasses.IDropInListItemRenderer">
public function init():void{
headerLabel = dataField.label;
_dataGrid.addEventListener(DataGridEvent.HEADER_RELEASE,sortChanged,false);
if(_dataField.localeCompare('Name')==0)asc.visible=true; }
private function sortChanged(e:DataGridEvent){
var dg:DataGrid=e.currentTarget asDataGrid;
varcolumn:DataGridColumn = DataGridColumn(e.currentTarget.columns[e.columnIndex]);if(_dataField.localeCompare(e.dataField)==0)
if(asc.visible ||(!asc.visible&&!desc.visible))
Alert.show(
'in..');
asc.visible=false;
desc.visible=true;
else if(desc.visible){
asc.visible= true;
desc.visible=
false;
else{
asc.visible=
false;
desc.visible=
false;
]]>
</mx:Script>
<mx:Text text="{_headerLabel}" />
<mx:Image source="{ascIcon}" id='asc' visible="false">
<mx:Image source="{descIcon}" id='desc' visible="false"/>
</mx:HBox>

I got the solution!!
i need to assign the headerrendereer to the columns dynamically inorder for this to work:
if anybody wants to know details of solution let me know

My i phone 4 cannot charge continously. it will charge then after few seconds its off then charge again. I cannot open it because it runs out of battery do i need a new battery?please help.

my i phone 4 cannot charge continously. it will charge then after few seconds its off then charge again. I cannot open it because it runs out of battery do i need a new battery?please help.

You could always check to make sure itunes is updated to 10.7 but im sure gdgmacdude is
right.
thanks
gdgmacdude
Hey dude
are there anymore hardware failure errors u know of
im kinda a novice apple man and could use all the help i can get
capp

I cannot transfer my music from my itunes to my iphone 5s after i connected my iphone to another laptop yesterday. please help me out

I cannot transfer my music from my itunes to my iphone 5s after i connected my iphone to another laptop yesterday. please help me out

If you are trying to drag a song over, do you have Manually Manage Music checked in iTunes? You need to check your iTunes settings before trying to put music on it. It may be that you have it set to sync. Check the Summary page of iTunes after you have selected the iPhone in iTunes.

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do!thx

Hi, i buy new phone in ukraine,but when i try add new device on my apple support profile,it says that serial nuber already used by another apple id please help what can i do?!thx

You purchased a gray market phone. The iPhone is not available for sale from any Authorized source in Ukraine. There are no authorized or supported carriers in Ukraine.
Take it ack and get your money back.
If you want an iPhone, go to a country where unlocked iPhones are available for legitimate sale and purchase one directly from Apple.

Another battery issue, please help

Similar Messages

Maybe you are looking for