Another Battery Query

Hi,
I've been reading through the posts for awhile now, and have tried all the Apple-recommended solutions to my battery problem (ie resetting it, etc), but nothing is working. I bought my mini brand new on October 1st 2005.
Here is my story:
- My battery will not charge at all. When I plug it into the adapter it shows that it is charging, but then when I unplug it (because it has been charging forever and hasn't shown that it is full), it won't turn on because the battery is still completely dead. I can turn it on when it is plugged into the AC adapter, but not on a computer.
- I think it needs to be repaired, but all of my songs are on my computer in Canada, and seeing as how I now live in London, my itunes library is no longer with me. I wanted to try and download the songs back onto my computer (since I was told by the Genius Bar that it will have to be completely replaced), but it won't recognize my mini because there is no battery.
So basically what I am asking is, is there any way to "jump start" my battery long enough so that I can download my music back onto my computer? Please help me!!
Thank you
HP Omnibook 6000 Windows XP

dannybcfc - I think the battery usage in the snap shot is pretty standard. Mine is below
Usage: 5 hours, 29 Minutes (Music, Facebook, Safari, Siri, on 3G and WiFi, and Games)
Standby is: 20 Hours, 16 Minutes
I'm down to 11% battery. This battery statistics doesn't disrupt my daily routine.

Similar Messages

IPod Nano Battery query

Hi, I got an iPod Nano 16GB for Xmas and was wondering if anyone could help me with my battery query? Have downloaded the pdf from Apple, but am still none the wiser. When I plug it in my laptop it gives me 'Connected; Eject before disconnecting' screen, I was expecting the screen with the green battery as it's being charged off the USB on my laptop. So, basically have left it a couple of hours and I can't tell whether it's charged or not without un-plugging the Nano and looking on it's screen - which incidentally says a 'full green' battery at the top of the screen, but there is no prompt to tell you this. I find that if I disconnect if from iTunes and put it in ‘sleep mode’ from the pre-set time of 15 minutes, I get the large battery screen indicator – is the correct?
I bought an Apple USB Power Adapter for my wall socket, have found from various forums, if disconnect the iPod from iTunes and put it on the minimum of a 15 minutes sleep mode from the menu I can get the larger green battery charging, is this normal/correct? As Apples pdf has no mention of the sleep mode and the larger green battery display in its pdf manual. Thanks.

Thanks, I'm a complete new user to the Nano - and the pdf wasn't to the point as I'd liked. Cheers.

How to Copy RPT of one BEX query to another Bex Query

Hi,
I have a Crystal Report-A1 based on one Bex Query ZABC_1. I also have another Bex Query with same output and source named ZABC_2.
Now i want the to copy A1 to A2 and have A2 referring to ZABC_2.
The only difference between the 2 queries is the selection option paramenters.
Please let me know any way forward on this.
Points will be awared for useful replies.

Hi Rajesh J Salecha,
What I understood is like :
You have two queries and both gives same results but one of the query having a parameter.
You have one report which is using query1. Now you want that report to be copied as Report2 and use Query2 instead of Query1.
If the this is the issue, then you copy Report1 as Report2 and go in Database and change the Data source location to Query2.
Hope this will help you. If my understanding is wrong then give us the work flow.
Thanks,
Sastry

Spatial Query that uses Result of another Spatial Query

Hi all,
I am using the SDO_DIFFERENCE Operator to return the difference between a query window and an intersection geometry. This is fine and i get an object back that is cast to a STRUCT using the SDO API. I want then to use this (returned)object in another SQL query that uses the SDO_RELATE Operator. The problem is that i dont know what type it needs to be so that the SDO_RELATE operator will accept it as a valid argument. Has anyone done this before or seen anything like it? Any help will be very much appreciated.
Keith.

Thanks for your help,
I have done the following steps, but i still dont understand why it doesnt work.
CREATE TABLE val_results (sdo_rowid ROWID, result varchar2(1000));
CALL SDO_GEOM.VALIDATE_LAYER_WITH_CONTEXT('SHAPES','SHAPE','VAL_RESULTS');
SELECT * FROM val_results;
1 null     Rows Processed <3>
2 AAARDDAAEAAAAA+AAA     13348 [Element <1>] [Ring <1>]
3 AAARDDAAEAAAAA+AAB     13367 [Element <1>] [Ring <1>]
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005)
FROM shapes c;
3     TRUE
2     13348 [Element <1>] [Ring <1>]
1     13367 [Element <1>] [Ring <1>]
If my rectangle and polygon is still invalid, can someone tell me why they are invalid. And how can i make them valid?
Thanks.
UPDATE:
I have solved Polygon issue.
In Spatial Developer's Guide it says:
Simple polygon whose vertices are connected by straight line
segments. You must specify a point for each vertex; and the
last point specified must be exactly the same point as the first
(within the tolerance value), to close the polygon. For
example, for a 4-sided polygon, specify 5 points, with point 5
the same as point 1.
I have added a point to polygon which is same as first point. Now, it can find the point in polygon.
INSERT INTO shapes VALUES (4, 'Polygon', SDO_GEOMETRY(2003, NULL, NULL, SDO_ELEM_INFO_ARRAY(1,1003,1), SDO_ORDINATE_ARRAY(306,193,130,441,489,653,88,183,442,354,306,193)));
But, when i run this query again:
SELECT shape_id,SDO_GEOM.VALIDATE_GEOMETRY_WITH_CONTEXT(c.shape, 0.005) FROM shapes c;
4     13349 [Element <1>] [Ring <1>][Edge <4>][Edge <1>]
3     TRUE
2     13348 [Element <1>] [Ring <1>]
1     13367 [Element <1>] [Ring <1>]
it doesn't say TRUE like it did for Circle ??
Edited by: WhiteScars on Jan 4, 2010 12:45 AM

Another RAW Query

Hi There.
Another RAW query. I have PS CS4 Extended 11. I have tried to open RAW (NEF) pictures from my NIKON D3100. I get the error message 'Could not complete your request because it is not the right kind of document'. I have tried downloading the latest update. I currently have Camera RAW Version 5.7.0.213. I have also downloaded the DNG converter but I still get the same error. I am using Windows 7 on a laptop.
Please help, otherwise no RAW Photography for me!
Regards Mike.

You need at least ACR 6.3 and you can not get there with CS4. You either have to upgrade to CS6 or CC, or use the latest DNG converter.

Pass the result of a SQL Query as table_name for another SQL Query

Hi All,
How to pass the result of a SQL Query as parameter to another SQL Query
Eg: I am doing the steps below.
1) select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ'
2) I want to pass the table_name from step 1 above as parameter to another query "select * from TAB1"
Thanks

Naveen B wrote:
Hi All,
How to pass the result of a SQL Query as parameter to another SQL Query
Eg: I am doing the steps below.
1) select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ'
2) I want to pass the table_name from step 1 above as parameter to another query "select * from TAB1"
ThanksYou should craete PL/SQL code with cursor which will accept a parameter and call that cursor inside the first one
But if the first sql returns only one row, you can do it with simple sql code
select * from (select distinct table_name as TAB1 from all_tab_cols where table_name like 'T_%' and column_name like '%XYZ')- - - - - - - - - - - - - - - - - - - - -
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Another problem: query in oracle

Hello guys,
I have a problem in a SQL code in a program that uses a Oracle connection.
The code:
public class ConBol {
     public void getDataBol() {
          String sql = "SELECT * FROM DOCUMENT_FISC WHERE NRDOC_FISC = ?";
          try {
               Connection conn = new ConnectionFactory().getConnection();
               PreparedStatement stmt = conn.prepareStatement(sql);
               stmt.setInt(1, 3969);
               ResultSet rs = stmt.executeQuery();
               System.out.println("here -- ");
               while (rs.next()) {
                    System.out.println("---while--- ");
                    System.out.println(rs.getString(1));
               rs.close();
               stmt.close();
               try {
                    conn.close();
               } catch (SQLException ex) {
                    Logger.getLogger(ConBol.class.getName()).log(Level.SEVERE, null, ex);
          } catch (SQLException ex) {
               Logger.getLogger(ConBol.class.getName()).log(Level.SEVERE, null, ex);
}When my SQL is only "Select * from myTable", the resultSet get all the data and the "System.out" inside the "while", works, showing me the data.
When I put a "where" on my SQL, the resultSet returns nothing, and the column that I ask, has items inside and the query should return me at least one row.
I really don't know what more can I do to solve this problem.
The server is Oracle 11g.
I try in Windows 7 and Windows XP SP3.
I try to use 3 diferent oracle drivers: ojdbc6.jar , ojdbc14.jar and class12.jar.
I try Eclipse and Netbeans, PreparedStatement and Statement, table name and column name in uppercase and lowercase, with alias, with other users from DB and no one solve the problem.
The data base connection is ok. When I copy and paste the SQL on the SQLDeveloper, the query works fine and show me results.
The program don't give any errors or exceptions, but doesn't work when I have a "where something".
If I put "where 1=1" he works fine.
Any help??

Artur,
I make the tests that you ask me to do and it works!!!
The value returned from the "select distinct" work when I put him on the original query.
I just can't understand how can this work if the another value that I pass to the query exists in the table too.
How can one value that exists, don't return me nothing?
At least, now I can be sure that the code is alright.
Thank's a lot friend, for you and JSchell. I will make more tests to try understand how this can happen.
Edit: I try to count the rows of that table. In PLSQL Developer, the row count was 5860. In the java code was 4730.
Can be out of memory in the resultSet?
Edited by: Herick on Dec 29, 2009 2:34 AM
Edit2: Forget what I said. I use the "Select count" and the resultSet came with just one result, so can't be memory problem.
Edited by: Herick on Dec 29, 2009 2:39 AM

Can I pass a SAP query to another SAP query???

Hi Friends
In SAP Queries we can edit the existing query and we can save it as a new query. In the same way is there anyway to pass a query to another query? As per my knowledge, I don't think it is possible, I want give confirmation to my manager, before telling this to him, I want to reconfirm it from you experts.
Please guide me.
Regards
Praveen

No Rob,
He is talking about SAP Queries only, but he is not aware of SAP, he is from Dot Net. Thanks for your reply.
Regards
Praveen

Another battery question thank you so much if you could help...

Sorry i didn't ask this in my other thread but i wouldn't get any replies if i did that lol... OK I wanna make sure Best Buy isn't giving me the old macbook pro for the price of the new one... In the System Profiler under Power it shows that my computer's battery has a maximum capacity of 6650 mAh... is that the charge capacity of the new macbook pro battery?? I just got this mac like 3 or 4 days ago... so far doing basic things like word processing the battery hasn't lasted more than 3 or 4 hours with the brightness at minimum and using the lower power nvidia 9400m... thank you so much if you could help me confirm that I do have the new macbook pro model and battery so I can stop worrying about this lol

Hi bodyboarder3452,
Another easy way to tell is from the external, bottom enclosure. Do you have a latch door on the bottom that allows you easy access to the HD and a removal battery? If not then you have the model with the "built in" 7-hour battery. The FCC definitely would seem to indicate that you have the 7-hour battery, as the typical FCC of the previous generations was more in the ~5500mAh range.

Updating from another table query

I have tried a merge query and I think I am not doing this right or for what I want to accomplish, it will not work. Here is the problem:
I have a lookup table
create table lkp1(
lkp_id number,
lkp_name varchar2(100));
and have a another table
create table test(
test_id number,
lkp_id number,
lkp_name varchar2(100));
I am trying to pull in the lkp_id value from lkp1 table into the test table. I have the lkp_name field in the test table so that I can reference back to lkp1 so that I can pull in the lkp_id value. How would I go about doing this if the lkp_name field in test table has the value duplicated over many rows. For example 5 records in the test table might have the lkp_name of 'ORACLE', and its lkp_id from lkp1 table is 25. How do I populate the lkp_id in the test table with the value from the lkp1 table, without specfiying in the where clasue ...lkp_name = 'ORACLE'. There has to be a way. I tried the merge query, and WOW...I was really off.
Please help!

scott@ORA92> -- test data:
scott@ORA92> select * from lkp1
2 /
    LKP_ID LKP_NAME
         1 name1
         2 Oracle
2 rows selected.
scott@ORA92> select * from test
2 /
   TEST_ID     LKP_ID LKP_NAME
        10            name1
        20            Oracle
        30            Oracle
3 rows selected.
scott@ORA92> -- update:
scott@ORA92> update test set lkp_id =
2 (select distinct lkp_id from lkp1 where lkp1.lkp_name = test.lkp_name)
3 where exists (select lkp_id from lkp1 where lkp1.lkp_name = test.lkp_name)
4 /
3 rows updated.
scott@ORA92> -- results:
scott@ORA92> select * from test
2 /
   TEST_ID     LKP_ID LKP_NAME
        10          1 name1
        20          2 Oracle
        30          2 Oracle
3 rows selected.

Another battery won't charge story . . .

I have read many accounts of batteries not charging, but have not found one that is like mine.
Stats:
From System Profiler:
Charge Information:
Charge remaining (mAh): 2847
Charging: No
Full charge capacity (mAh): 3441
Health Information:
Cycle count: 0
Condition: Good
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 12127
AC Charger Information:
AC Charger (Watts): 65
Connected: Yes
Charging: No (the kicker)
Coconut Battery Info:
Current Battery Charge: 2847 mAh
Max Batt Charge: 3441 mAh
Current Batt Capacity: 3441 mAh
Original Batt Cap: 5400 mAh
63%
Loadcycles: 339 (battery had to be removed and replaced to get this number)
Age of Mac: 67 months
Charger Connected: Yes
Battery is Charging: NO
I have reset the PMU, tried another power supply and battery.
Symptoms:
Battery at 83% and holding, but will not charge. Power cord and computer react to changes in operation as it should. Although the power plug that belongs to the machine is slightly loose and the light flickers and changes color (red, orange, green) when jiggled. Computer works fine without battery. When I tried the other power cord the light went to and stayed green, but still no battery charging. The other battery from a spilled on machine, of which I used this machine to keep it charged a while ago, shows the same results. Just got finished replacing the SuperDrive. I did not notice any peculiar behavior prior to, but I was not looking for it and did not have use of the machine for long prior to.
Overall, things seem to be in order except for the battery not charging, which I'm pretty sure is new. I don't use this machine as I use to, letting others use it instead. I live on my FW800. It has 5 monitors and a real keyboard. I have another 17" PowerBook that I was given after it got spilled on, that I have never sought to have refurbished. Have been canabalizing it for matching parts for this one. So this one has gotten the wear.
That's about it. Any assistance will be greatly appreciated.
...guy

Hi, Guy.
...the power plug that belongs to the machine is slightly loose and the light flickers and changes color (red, orange, green) when jiggled.
Your Powerbook's DC-In board has probably been damaged by having the power cord jerked or the AC adapter plug bumped while it is connected. The plug wobbling in its socket (or the whole port inside the PB wobbling) is usually an indication of this kind of damage, as is the occasional appearance of red in the ringlight around the plug, which should never be red at all. You've tried a different adapter and a different battery, and it sounds as though there may be a problem with the first adapter (not surprising if its cord has been tripped over or otherwise abused). But even using the second adapter and the second battery, charging fails, so clearly there's a problem in the Powerbook itself. If it isn't the DC-In board it's the logic board, but the DC-In board is a good bet in this case.
http://www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-17-Inch-1-1- 67-GHz-DC-In-Board/255/1

Battery query

Hi,
I have had this laptop for a year and a few months and it has developed a problem with the battery. It'd be great if someone could help me with this.
The problem started when i left the computer in sleep mode without the AC adapter attached. The battery died and when i turned the computer back on it asked me whether or not to go into safe mode. I clicked no. There were then a number of error messages when my computer came back into windows, kaspersky stopped working for a short while and the compeer gernally went skeewiff.
Since this point the battery has not held any charge and the indicator light flashes constantly. I have tried checking the battery/AC adapter/system board as the support page suggests which would indicate i need a new battery. But I'm concerned the problem is more of a software problem as it went so suddenly and at the time other software stopped working. Another thing i have tried is uninstalling the battery from system devices - but alas to no avail. Do i need new battery? can someone please advise?
here are my laptop specs:
Model: DM3 1025-SA
Battery part number: 538692-251
spare number: 577093-001

Plz calibrate the battery
charge it to 100%.. unplug the AC adapter and go to safe mode
let the PC run till the battery drains its power to 0% and notebook shuts down automatically
then try using the battery normally and check results...
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Another battery problem...any advice???

Hi everyone!
I've been reading some of the issues that were posted here. I also replaced my battery through the recall program last year. I have noticed recently that my battery only gets max 1 hour when it used to get almost 4 hours. I checked using Coconut battery and it says my capacity is only 25% of the original. Actually I mostly use my Mac plugged in. I just reconditioned the battery yesterday by draining it all the way, removing it and putting it back, then charging it all the way again and the results are the same. Also it's worth noting that I noticed this problem after switching to Leopard. When I was still on Tiger my battery seemed to be fine although I can't say with 100% certainty that it's the cause. Anyways does anyone have any more advice or do I just need to call AppleCare? Thing is I live in the Philippines and replacing the battery is not as easy as in some other areas...
Thanks in advance for your help!
Reg

Same problem. I will set my laptop down and come back and the light around the power cable is no longer glowing. I tried a couple different outlets and even installed it in a different surge protector. The weird thing is all I have to do is unplug the part of the adapter that is plugged into the wall or surge protector and plug it back in and it comes back on. Or just turn off the power switch on the surge protector and turn it back on.
I am almost 100% sure this is do to leopard. I just installed OS X 10.5.2 toward the end of last week going from tiger. Just started to notice the power problems the Yesterday and today. My battery life does not seem to be as good as it was with tiger or panther. Still better than what most of you report. I think I got 4 hours out of it yesterday. Also, I got a replacement power adapter under apple care less than a year ago. I have never had this issues in the over 3 years I have had this powerbook until yesterday.
This is the first time I have upgraded to a new operating system this early in the release and I feel it has been a waste of time and money so far. As a matter of fact my laptop is performing fairly well other than the problems mentioned above. However, my wife is graphic designer and her apps would open and do basis things ok but when it came time to collect for output or do a Print as PDF high res comercial print quality there was no way. We will have to spend another 600 to upgrade for adobe CS2 to CS3 and there is still no guarantee it will work. Freehand will probably not be updated to work with le0pard.
So I spent several hours doing a erase and install the old operating system so she could get her jobs out. We reinstalled everything. Like I said, not a good decision to go to leopard so far. I am going to stick with it unless more problems come up or my power adapter keeps acting up.

How do I reference columns in a report query from another report query?

In Apex 3.1 it is possible to generate a report on more than one query. I have read that these queries can be correlated, but I cannot find how in the documentation.
I go the Shared Components and create a new Report Query:
select * from dept
Then I click Add Query and I add:
select * from emp
How do I correlate these two queries (I want to join emp.deptno to dept.deptno) and have a nice hierarchicle XML-file.
Is it possible in Apex 3.1?
Dik Dral

Dik,
This type of query can't be build. The two queries are independent, you can't reference values in the first query from the second query. However you can reference page and application items - which won't help you all that much with this scenario though. You could also try combining the two queries into one, and then take care of the proper presentation in your template.
Regards,
Marc

Can we call a bex query from result of another bex query?

we have a requirement wherein client has asked us for bex reports
in a BEX report
multiple queries needs to be executed and the querues are dependent on their parent query
i.e.
result of query 1 works as input for query 2 and result of query 2 works as input for query 3..
is it possible??
kindly help.

Hi,
(If RRI is not exactly what you need)
Eg. for a scenario where we want to display all positions of documents where at least one position in a document fits given cretaria. You can try it using query/prequery construction.
In short:
Create two querries:
In the first query you set the criteria (the output will be a list of document nos that fits that criteria). For peformance reasons keep this query small.
In the second query give restriction on document number (replacement path with the first query as a parameter).
Regards, Leszek

Another Battery Query

Similar Messages

Maybe you are looking for