Another can't get past 240htt post (k8n neo2)
3500+
k8n neo2 plat (1.1)
adata pc4000 (ddr500)
Fortron 400w psu
With HT at x4, i can't get past 240 when my ram is rated at 250mhz on loosest timings and 1t and dual channel. Doesn't matter whether i'm trying to max my cpu and using divider on ram, or lowering cpu multiplier and maxing ram, both max at 240mhz.
my cpu is watercooled with 1.7v goign to it, and 2.85 volts to the ram. I measured the +12v rail during Prime 95 in Priority 10 mode and it was 11.74-11.75, so psu isn't the problem right?
I first had my agp thing set to 67mhz, and i would get disk write errors and failure to load OS errors during boot up. When i try 68, after sitting at welcome screen for a few minutes, it loads to windows and immediately freezes.
Any ideas?
see here
AMD64 3500+ & MSI K8N NEO2 SATA Oddity
i have the same problem with activated sata controller
htt is max. 230 htt 4x
i hope msi can fix it!!!!!!!!!!!
DOT sergant or so doesn´t function.
Similar Messages
-
Can not get past "Enter your system lock PIN code to unlock this MAC" I never had a PIN code can you help?
ExciteWalk wrote:
I can't post the link here cause I'll probably get banned at this point. So help yourself and search rumors elsewhere
That's not very helpful, why are you here? -
My MacBook Air can't get past the gray screen with the apple logo. What's the fix?
My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
How to back up and restore your files
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
How to use and troubleshoot FireWire target disk mode
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode.* The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
I already have a valid payment method for my iTunes account, but can't get past the Family Sharing setup prompt telling me to add a payment method . What to do?
I had the same problem and found a bunch of others did, too. Unfortunately all the posts had no responses! Anyway, I previously had my payment method linked to my paypal. I tried changing it to my credit card and it worked. Don't know if there's a bug with using paypal but that seemed to be the culprit for me. Good luck!
-
I just attempted to update my apple iTunes to 11.1.4 which resulted in the msvcr80.dll error message. I followed all of the instructions to move the .dll's to the desktop, I removed iTunes via the control panel, and now I can't get past the Service 'Apple Mobile Divice failed to start. Verify that you have sufficent privilidges to start systems services. I now have no iTunes on my laptop, can't reinstall iTunes, and I am pulling my hair out because I can not figure out how to send an e-mail to Apple because I bought my iPad just over a year ago. PLEASE HELP!!!
V/r "TRACER"
CDR Harold W. "TRACER" Valentine, SC, USNSolving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
Hello,
I am having setup issues with a used 4S iphone. I can't get past the Apple ID step.
First it said it was an existing ID and I should go to iforgot and reset my password.
I did, but still keep getting the error message.
Then I entered the serial number online support and it said the ID was another account. Would that be the seller?
Do I need to get them to unregister under their name before I can proceed? Or...
Please help. I start new job on Monday that required me to have a smartphone. I need it up and running.
Thank you
RYes, you have encountered Activation Lock (Find My iPhone Activation Lock - Apple Support). The only way that phone will ever be usable is if the owner the phone is locked to releases it (see: Find My iPhone Activation Lock: Removing a device from a previous owner’s account - Apple Support). If you are lucky the phone is locked to the seller, so you can ask them to unlock it. If the seller is merely a middleman and the previous owner is not the seller it gets much more complicated. It's even possible that you bought a stolen phone, in which case you will never be able to use it and you should return it for a refund.
-
I can't get past white screen when starting up, any ideas?
I Can't get past white screen when starting up, any ideas
http://support.apple.com/kb/TS2570 Mac OS X: Gray screen appears during startup
===============
When posting in Apple Communties/Forums/Message Boards.......It would help us to know which Mac model you have, which OS & version you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.
CLICKY CLICK---> https://discussions.apple.com/docs/DOC-3602
CLICKY CLICK-----> Help us to help you on these forums -
Can't get past account information in App World
I have tried everything but it just doesn't work.
After I sign in it takes me right to my account information but then I can't get past that screen..its like an infinite loop.
Having a balckberry without being able to use app world sucks. I'm tired of downloading everything ota
PLEASE help! I will be eternally at your debtDarn -- that is exactly what it should do. If you could then navigate to MyWorld, it would present a screen saying it is resynchronizing with the AppWorld Servers, and this process has been known to clear up many other issues. Rats...
See if this is helpful or at least correctly indicative of your symptoms:
KB24200Screen loops when BlackBerry ID or PayPal authentication is verified in BlackBerry App World 2.0
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
I recently added photoshop elements 12 to my computer but can't get past the initial log in screen. It goes gray and spins. I have a current serial number and log in ID/password but still not working. Any thoughts?
Hello,
I recommend you contact AT&T's dedicated BB Support staff (call their front line, request escalation to BB Support) and have them check to be sure that your account with them is correctly configured for this device. Sometimes when switching devices things don't fully automatically move behind the scenes, and only they (ATT) can validate that.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Cursor engages bookmarks too fast and I can't get past the first few folders.
This may be a Mac OS X 10.5 problem and not a Firefox 6.0, but I can not locate anything to slow down the response time in which the cursor engages a folder or bookmark (immediately upon passing over) (and throwing up a window that I have no intention of viewing). I can not get past that spot in the bookmark scroll, as releasing or moving the cursor only works within the folder (politics/travel/etc.).
Thank you for any help in resolving this speed thing!
GarfieldTry this extension
Stay-Open Menu :: Add-ons for Firefox (21.5 KB)
*https://addons.mozilla.org/firefox/addon/stay-open-menu/
Always read the author's homepage, if available, for additional information on an extension.
author's homepage: http://www.shadetreeapiary.com/extension/
My middle-click is set to "Enter".
Option to enable use of Ctrl-click (Meta-click on Mac) as an additional alternative to middle-click. Handy for laptop computers and those who have set their middle-mouse button system-wide to another function instead of the default 'middle-click'. -
Updated to FCPX 10.2, can't get past splash screen
So, I got through a batch of projects, and finally upgraded to FCP 10.2
After installation, I can't get past the splash screen. I'm asked, via a dialogue box, if I wish to update my libraries / events. I do.
Then... I see rapid fire text loading and then updating libraries / events. Then it gets stuck on a particular event... beach ball... nothing.
I've tried several times, and it gets stuck on a random event.
I can't get past the splash screen. I've rebooted. Still nothing.Generally, if FCP opens under one account but not another, the issue is a corrupt preference in the non-functioning users account.
While in your user account, download and intall FCP Rescue (google it to find it), open it up (with FCP not running) and TRASH your preferences.
Try FCP again.
x -
HT201320 How can I get past, unopened emails on my phone? I can only seen new, unopened emails.
How can I get past, unopened emails on my phone? I can only seen new, unopened emails.
ayokunleade wrote:
I have a similar problem with my Z10, I'm unable to get mobile data connection except for Wi Fi connection on my Version unlocked device. Not even MTN Nigeria works. Anytime I do a OS upgrade check, it tells me I have the latest OS. What can I do? I'm so close to throwing the device into a furnace.
To all of you who have this dara service problem I ahve afew question for you
1) Where did you get you BB10 device, I mean did you get it where you are located or in another country (while on vacation business trip, etc...)
2) What is the device model, SETTING > ABOUT, check the field MODEL NUMBER it should say something like STL100-1, or STL100-2, or STL100-3, or STL100-4.
This very important, because not all phone will work for data everywhere, those model number that I have previously listed determine what are the frequencies that the phone will operate with, and if you carrier where you are is not using the same frequencies that the phone is design to use then no matter what you do it will not work unless you replace the phone with the proper model ofr your location
Using the Playbook and the Z10 and the Z30 and loving them
Martin -
On my wife's iPad mini I can't get past the screens accepting the software license to upgrade iOS over WiFi.
Works if I do it over iTunes on my desktop.
I get the screens to agree to the software license (twice) then it sits there until I get impatient. like 30-60 seconds. Have tried a hard boot but have to connect it to the computer each time. Latest was when I upgraded to 8.2Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
I just installed some Quicktime add-ons, and I restarted my Mac. It goes to a Darwin console, I can log in to the console, if I exit, it takes me back onto the startup user menu, and if I select my user account, I'm right back into Darwin, being prompted to login.
I've never used Darwin. How can I get past this console and onto my graphic interface/desktop?Andy
The first thing to do is to look at your logs, to see the cause of being unable to start up. But rather than point you at some other threads, let's do it from scratch here. You may want to print this post out, preferably in a largish mono-spaced font.
Since you are able to log in at the prompt, this simplifies things. After logging in, let's look at the system log—type carefully, spaces and punctuation are important:
tail -20 /var/log/system.logThis command combination looks at the last 20 lines of your log which should be enough.
Look especially for messages saying something like "login authorization failed", "exiting to console" or something similar. Copy the lines above that and post them here. If you don't see this specific message, post some of the lines at the end of the log.
We'll take it from there when I see your output. -
MD G4 can't get past the log in screen
Trying to diagnose what's wrong with the trusty mirrored doors G4. The light goes on when I press the power button, the chime sounds, but can't get past the log in screen, and the mouse arrow is stuck on the left top of the screen; I can't get the mirrored door to open, to try starting with the original cd; can't get to how to start it from an external drive.
At this point I'm not going to spend much $ to save this computer which has served as a backup device for the past 3 years, but would like to get in one more time to make sure I have everything I want to save. Suggestions?If you have enabled remote log in and know how to ssh into the Mac from another computer - reply and I'll walk you through the commands to look at the logs before you log in from the keyboard.
If not - you should boot from a CD and try to repair the disk and possibly look at the logs using the console utility.
Please advise if you want to look at the logs to see what the problem is or if you can fix it from using the CD's to repair the disk.
Maybe you are looking for
-
Sending internal table data to application server as an XML file
Hi All, I am trying to send the internal table data to application server which should be stored in XML format. I am using the following code: DATA: result TYPE xstring. CALL TRANSFORMATION id SOURCE tab = p_output-xsfdata
-
Problems syncing ipad to iTunes on PC?
I have recently purchased an iPad mini, but don't seem to be able to connect it to iTunes on my PC? My PC is running windows XP and the iPad iOS 7.0.4. When I connect the iPad to the PC the iPad asks if I trust the computer, which I click on the ,T
-
Hi I have used MRNB for revaluation of GRs. The TDS amounts are not calculated. How can i post this? Also how can excise be posted? Thanks Rahul
-
Artwork behaves strangely in 11.0.3 (42)
In "Albums" view, some tracks Artwork tab is not accessible from "Get Info". In miniplayer view, these tracks show no artwork. Other tracks from that album do show Artwork. Tracks are playing from iCloud. If I hit the "Download from iCloud" button, t
-
Hi, i want to add a SELECT ALL button in the split deliveries screen of shipment. (VT02n->Deliveries->Split Deliveries). I have no clue how to do that. Is there any menu exit for doing this. Can anyone kindly help me in this? regards, Pavan.