Another CN001 Connectivity Problem

Have noticed a few posts over the years on this subject, and I am suffering yet again with it.
Manage to watch a few minutes on my iPad, then the dreaded CN001 messsage. Only solution is to come out of BT Sport and log in again to get another few minutes of viewing. Haver managed to miss all of the goals in the first half of today's game, and missed all but on on the Conference game yesterday with the same problem.
I have deleted and re-uploaded the BT Sport App, but this makes no difference.
It's really becoming a joke now - I resigned up with BT to get BT Sport, but I seem to be able to watch is less than ever.
What the heck is going on with BT???????

Hi tonymc,
That error message usually means you're not connected to the internet.
Are you connected to your Hub's wifi at home when you have this problem or are you out and about using a mobile data connection?
Post back and we'll take it from there.
Robbie
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

Another ipod connection problem.

I've had my ipod for quite a few months now and it started off with no problems connecting to my PC and downloading songs to the ipod from the PC.
However, it seems that evertime i try to update songs it gradually got more and more problematic, it started of with me having the connect the ipod several times before it was recognised by itunes (it has though always been recognised as connected to my PC via my computer etc.) I've always been able to work around these problems but now I seem to have struck a brick wall.
I connect the ipod to my PC through the ipod USB cable and nearly immediately the ipod is recognised by the PC as being connected, however itunes does not recognise that the ipod is connected. After roughly 5-10 minutes after connection i get a box saying itunes needs to be updated and do i want to do it. It then leads to a box with a picture of an ipod and 2 buttons, "update" and "restore". Both buttons are greyed out and a message saying "initialising..." stays towards the top of the box, I have waiting roughly 20mins for this to change but it remains static.
This is however as far as I have gotten as the box seems to hang as I get a "not responding" message from it if i look in taskmanager.
I am using itunes version 6.2.0 and ipod software 2006-01-10 and the problem repeats itself after reformatting the ipod and reinstalling the itunes and ipod software.
I would be most grateful if anyone could help as it seems the only option i have left is to take it back to the store i bought it from.
Thanks in advance.

Disabling the computer's antivirus and firewall during the download and update usually resolves that error.

Another Internet connection problem with solariis dev express

I have the same problem, i was installed new solaris dev express , my ifconfig output detects my nic
and my name nic is nge0, but i dont connect to internet.
i was reading this forums but the result is null.
i have a cable modem and i using a ethernet connection.
i use this command:
*#ifconfig nge0 dhcp start*
the result is null the dhcp doesnt assing an ip to my nic
then i create a */etc/hostname.nge0* file and follow comments that i seeing on this forums
*#uname -n > /etc/hostname.nge0* ...too i create a */etc/dhcp.nge0*
again i wrote:
*#ifconfig nge0 dhcp start*
but no , the result is null
then i follow more comments on this solaris forums and i added the dns in */etc/resolv.conf*
but the result still null
later i check the gateway using the comand
*#netstat -nr*
but only i see my loopback ip --> 127.0.0.1
too i used the command
*#sys-unconfig* , reboot ..mmm no
but still the same problem
my question is how to set the internet connection using a cable modem that workkssss!!!!!!!?
my computer is a 32bit machine with solaris devexpress and my cable modem.
how to tell to solaris which is my gateway?
i know that the command in my linux box is: route add default gw ip
what i have to do?
i modify a */etc/nsswitch.conf* and i added a dns word after files in hosts line.
create a */etc/defaultrouter* <-- this is to when i have a internal lan ip
in the */etc/hostname.nge0* put only my hostname
*/etc/hostname.nge0* <-- myhostname
or
*/etc/hostname.nge0* <-- inet myhostname
what is true? what is correct? i wsas reading about solaris offical docs about dhcpagent but i dont have clear my ideas.
please someone that you know how to set the internet connection on solaris dev exprres using the dhcp that serves on cable modem.
i dont believe that be more complicated than Linux or FreeBSD
Thanks.

I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
(OPTIONAL) While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Yet another Music Store Connection Problem

First time iPod/iTunes user. Just Installed iTunes 5.0.1.4.
I Get The Error Message: iTunes could not connect to the music store. The network connection Timed Out.
I tried many of the suggestions that were posted to no avail.
Whatever iTunes is doing it seems to be pretty anti-social when it comes to network I/O. I noticed that when I operate iTunes, IE couldn't see any web sites. So I stopped iTunes, opened a command window and started the command "ping yahoo.com -t". It responded normally and uneventfully. But once I restarted iTunes, the ping results started timing out. I get the same result when I ping my router instead.
Any Ideas ???

Well.... This has been a hot topic in these forums for a long time. I had this problem for at least 6 months without a resolution. The answers usually involve turning off a software firewall like the new Windows XP security center or Norton firewall. Believe me when I tell you I tried everything to fix this including turning off all firewalls. I eventually was able to find a copy of Itunes 4.7 and have been using that successfully (being able to connect to the music store).
I solved all my connection problems yesterday. I started up my disabled Zone Alarm Firewall program. I went to the allowed to pass through program list and clicked allow for all the programs that connect. Now every thing works great and I was able to install the latest Itunes for windows & connect to the store. The Zone alarm is running as well as the windows security center firewall. I think the Zone Alarm has opened up communication ports that the window security won't. I know many of you will think that I am an idiot. Maybe I am but I got the darn thing working. My belief is that this is not an Apple malfunction. I take back all my curses at them.

Unending connectivity problems -- and Desktop Help...

I'm wasting so much time on connectivity problems that it's positively wearying. Prior to the installation of BT Infinity here in April, I had a low quality broadband service because of the length of the line from the exchange: if I could get a download speed of 1.2Mbps and an upload of a quarter of that, I was doing well.
BT advised that thanks to fibre optic, my Internet should run much faster. So we had Infinity installed. I'm registered with Speedtest.net so am able to see my performance record.
The average download speed is now aroun d 6Mbps and the average upload, more than that at 7Mbps. How an upload speed can consistently be faster than a download escapes me.
But I'm not familiar with the ways of Internet connectivity and try as a I might, can't get my head around it.
This desktop computer runs Vista OS. Vista was **bleep** when it came out and is renowned for its botched handling of Internet connections. So I'm not blaming BT for the literally unending connectivity problems that are occurring now, with line drops, speeds slowing to a crawl, and no guarantee that any connection will last. But it would be good to actually use BT software to help fathom out what's going wrong here, and today's typical morning which looks like this:
1) Boot up computer. Automatic connection to hub via Netgear USB wireless adapter. Hub is on ground floor of this 3-storey property but signal strength from hub is excellent, as confirmed by inSSIDer monitoring, currently showing 54 with no other networks anywhere near that figure.
2) Perhaps 5 minutes after connection established, it's then lost. 'Local Only' is displayed. This is, apparently, a known Vista problem. But Microsoft has issued a fix for it. I know this, because it took 100 hours of ploughin g the Net to find out that MS had finally admitted to one more Vista screw-up. I've used the Microsoft router "fix it" before and it didn't work ("failed to process") so uninstalled it and have DL'd it again now and run it. This time it says it has fixed everything.
3) Computer is re-booted to make the fix effective. Computer connects to Internet. Speedtest.net check yet again confirms that upload speed is faster than download speed.
4) Connection dies. So much for Microsoft Fix It.
5) Windows diagnostics reports that it can re-set the IP profile (or something.) I click yes. The re-set goes through. Connectivity is restored. 10 minutes later, connectivity is lost. Just a red X in the tray. No connection of any kind, not even that daft 'Local Connection' only alert.
6) Reboot. Yet again. BT Desktop Help was installed here and ran OK when we were using our Netgear DSG34 router. But since the change to the BT Hub, the BT program has never run at all. So-oo. . . It has been uninstalled. And then re-DL'd and re-installed. And though the installation has been completed, clicking on 'launch' has failed to launch anything. But anyway. An hour ago, in one of the brief periods today when the Internet connection was holding up, I Revo-ed out the earlier install, DL'd BT desktop Help and re-installed it. . . and I'm still at the same stage as always, with a Firefox browser page that's open and completely blank and has been for the past 30 minutes. The URL is:
file:///C:/Program%20Files/BT%20Broadband%20Desktop%20Help/btbb/Start.html
Repeated page re-loading gets nowhere. Malwarebytes PRO is turned OFF to prevent any possibility of blocking and the antivirus is termporaily SUSPENDED. This PC runs on Windows standard firewall but even turning that OFF doesn't get the page to load. Copying the address into Internet Explorer in case there's a Firefox problem merely results in Firefox being opened and the same blank page running there.
7) After all that. . . Connection lost yet again and this time, Windows cannot connect at all. It reports that the "wireless network security key is not correct". I happen to know that it is, because this is maybe the 20th time it has reported this in the past 10 days and every time I have to key in the "correct" key all over again. . . at which point Windows still says it isn't correct and cannot repair.
Turning off the computer completely, unplugging from the wall, holding in the power switch for a full minute to clear the circuits, traipsing up and dowen three flights of stairs to turn off the hub, then wait, then turn the power back onm again. . . Ah, wot fun times I'm having here with my particular versioin of Infinity (as in, an infinity of connectivcity problems.)
Summary: I seem to be being simultaneously hit with one issue after another.
I'm bewildered as to why ever since Infinity was installed here, my upload speed is generally faster than my download speed. I'm not happy with endless Internet connection failures though am thinking that Vista is playing a large part here with its "wrong security key" and unending 'Local Only / Limited Connection' failures. I do miss my Netgear router and the ability to access a fantastic help menu and re-boot directly from the desktop without having to keep going up and down three flights of sdtairs to do so (I haven't been able to find out how toe access the BT Hub remotely.)
Above all though: I'm really tired of repeatedly trying to run freshly downloaded and installed BT Desktop Help software but getting no further than a blank page because the program has stalled.
If anyone has any advice / suggestions, other than to buy a carrier pigeon, that'd be much appreciated.
Thanks.

Thanks again to John and gg30340. Here's an update:
1) BT Desktop Help removed completely from this computer. The uninstaller itself mopped up everything, which surprised me. But anyway.
2) Bt Home Hub manager set up and working. Had to input serial number and create new password. All of this sounds fairly easy and would be if one had the device near the desk. But the idiots who built this property shoved the BT master socket inside the garage next to the door. Our two home computers are on the third floor. To ensure the wireless signal strength is OK, the Hub and Infinity module/device/whatever it's called are on a high shelf. It's a major job to even reach the darn things, never mind read the labels seeing as how the BT Infinity engineer was good enough to tidy up the cabling and make a very tight connection to the wall socket.
3) I had hoped to be able to back up the Hub's settings, seeing as the software provides for Advanced Settings / System / Backup. But not on mine (Hub 3.0). All that System allows is choosing which internet clock to define the accurate time. Everything else in System is just a pattern of short lines as if trying to indicate that there's some text there but it's invisible.This is now my second encounter with BT software which, for whatever reason, isn't functioning as it should on this PC.
4) Hub reset to factory fresh, according to BT guide.
5) Reset appears to have achieved nothing apart from requiring the password to be popped in again. After reset, it wasn't even possible to connect to the hub manager. Internet connectivity was eventually established for all of 30 seconds and then, gone.
6) Computer was shut down and then booted anew. Internet connectivity is still. . . dreadful. One minute everything's fine and then, literally,. the next minute a webpage won't load. Even opening the Hub Manager has taken three attempts, i.e., disconnecting from the Internet, re-connecting, failing, and trying twice more until success. Yet all the time these failures are occurring, the tray icon is showing a steady, unwavering green icon for Local and Internet access -- despite the fact, there manifestly isn't any.
7) Speedtest. net tests are actually showing upload and download 'trajectories' going slower and slower and finally halting at some point on the arc, then after a period of up to 30 seconds, suddenly becoming animated again. Speed test results with broadband speed checker UK and Think Broadband's checker are so at variance with one another, and with Speedtest, net, that it seems all three are using different technologies in pursuit of the same thing. Either way, upload speeds continue to be much, much faster than download speeds, a state of affairs I certainly have never encountered before.
8) Speedtest net tests taken in the past 10 minutes, with one test following on from its predecessor, begin at 8.24 down/8.88 up, followed by 5.24 down / 6.40 up, followed by a mind-numbingly lonnnnng 0.62 down / 8.70 up -- in other words, a continuous yo-yoin g of Internet connectivity to the pooint that it actually might as well not even be here (I've had to make five attempts just to get on to this forum. . .)
9) BT Speedtest will necessitate disconnection of everything downstairs and all boxes being lugged up here. This is actually going to require uncoililng tied-off cabling and hanging off a stepladder to do so -- though I surely can't be the only person in Britain who doesn't have a nice, handy BT master socket in their study or lounge. That said though: until we switched to Infinity, we *never* experienced these kinds of horrendous connectivity problems and never had need to unplug the Netgear router downstairs and bring it upstairs to connect directly to tjhe desktop PC so BT's own test could be run.
I'll just have to get to work dismantling stuff tomorrow. However, I have to say that after a factory re-set which has changed nothing at all, I'm beginning to think there's a problem with the BT line itself (hence why I'm happy to follow the advice here, though less than happy at the prospect of the messing about involved.)
Thanks, you two, for your patient help, and also for clarifying the situation re the three signal paths being shown on inSSIDer. At least I know that's usual now! And now, hopefully, when I press 'Post', I won't be faced with an endlessly spinning Firefox circle culminating in what may well be, or seem to be, the 57,938th time today of seeing "Page Not Found". . .

Network connection problems, please help!

I have had an iPod Touch (4th generation) for over a year now and it worked fine. Today, something went wrong with my network connection. One moment it says that I'm connected to a network, and a few seconds later it says I'm not connected... Then a few seconds later it's connected again. I have full wifi bars, and it does it throughout my whole house. The wifi symbol keeps going on and off. I tried turning my Verizon Westell Model 6100G Modem off and back on because this normally fixes my wifi connection problems. This didn't work. Then I tried turning my iPod off and back on. This didn't work. I tried turning the wifi off and back on. This didn't work. I tried forgetting my network and signing back in. This didn't work. I also tried resetting the network, and this didn't work either. I'm not having any connection problems with my laptop, it's working fine. It's only my iPod. I'm still able to use the wifi, but for a split second, it will not work. I'm not sure what else to do. It's very annoying! I'm going to see if it does this at other peoples houses with their wifi. Can any one tell me what's wrong and how I should fix it? My only theory is a broken antenna...Please help! Thanks!

I have two things you could try.
1. Plug your iPod into the host computer that which the network is based around because sometimes the network has trouble identifying a device if it has been a while since you plugged it into the computer.
2. Find some way to get your network information (IP address, Subnet Mask, Router, DNS numbers) from another device on the network (e.g. laptop). Then go to Settings > Wi-FI and find your router and tap the blue arrow to the right of the name and tap the tab that says "Static" and enter this information accordingly. Then exit back to the network names menu and re-enter your passcode for your network (assuming you have a passcode)

Microphone connection problems with SB audigy 2 ZX platinum pro

I am using an old SB audigy 2 ZX platinum pro purchased back in 2004. It is installed on a PC that I stopped using it in 2005. The pc has no problems and I have started using it again.My problem is that I cannot connect the microphone. Everything was working fine at the time I was this pc including the microphone.At that time I had installed win xp pro( no service packs were available). But after I had to move physically in another location(connection and disconnections etc)and a pc format I cannot use the microphone again. I am trying to connect it to the front panel and to the appropriate places as indicated in the user manual but nothing is happening. I have connected properly the sound cart and all other components are working fine. I checked whether the microphone is checked to silent mode and all other software/di'vers nonetheless everything is working fine. I am now using Win xp pro sp3. I have contacted Creative and they told me to check the mic boost option. But there is no mic boost option now. I clearly recall that there was one when I was using this pc in 2004 under win xp pro(again no service packs were available at that time).One solution I could think is to format again and install some old version of win xp pro (say 2003 or so) and then update to current. But I do not want to format again since I do not have that version of windows available(copyright issues may also raise) plus for some other reasons I do not think I should mention them on an Internet forum. I also tried to download the latest drivers ans apps form creative ,clean installation from the orginal cd including Daniel_K pack and everything someone could think without solving the issue.Creative during our last communication in a very polite way told me to stop emailing them and try to solve the issue on my own as this product is no longer supported. One thing I neglected to mention above is that the mic boost option is available in the motherboard sound chipset. I checked it in one of my attempts to solve the problem. But it disappears when installing the SB driver. I know that if I manage to configure mic boost in the driver settings I will solve the problem.But once again there is no such option. Could you please provide with some suggestions and solutions on how to solve this?. Thank you very in advance for any suggestion and help

Anybody?

Who can shed some light on my ongoing connection problem. After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet. I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to

Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?

Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden

M website in Verizon's Site Builder can't be crawled by Google-server connectivity problem-

I made a one-page website in Verizon's Site Builder program, then "added my site" at Google. Google says it can't crawl it. Don't know if crawling is necessary but seems good to have it working regardless. Google says there's -server connectivity problem-. Would that be Verizon? (I purchase FIOS)
I have another website made in same Verizon program & don't have a problem with it at Google. It's almost identically made, & also one page. So why the difference?.
Anyone know how to fix or understand this? How to correct server connectivity problem? or how to reach Verizon support service about this? (no support is available at Site Builder) .
FYI, the -add a site- & website tool dept. at Google is called Webmaster Tools. Free tools for websites.
I'm so disappointed all my efforts contacting tech supports at Verizon hasn't offered concrete answers. They pass me on to other depts. one after another...
Would appreciate direction with this. Many thanks.
Solved!
Go to Solution.

I've gotten a response, and it would seem that since my webpage comes up fine when typed in browser, that there isn't anything more that Verizon can provide. That it would be on Google's end to assist. But Google says there is a server connection problem.
In the end, the website seems to work fine and I'll leave it at that. And for whatever crawling provides, I guess I will pass on that.
thanks for the response.
also, the area for == private support messages == can be located below your post via your profile page. (i think that's how it works.)

Content Server connection problems

SAP Content Server connection problems
I have installed the SAP Content Server on a Windows 2003 server. I connected to the Max DB on the remote server from Database Manager on my PC. I created repositories in R/3 in OAC0 and CSADMIN and saved documents to the Content Server. This all took a few hours from O/S install to saving a document in the repository, so I do understand the basics of the Content Server and Max DB.
Unfortunately we are not going to use Windows; we will be running this on UNIX. Therefore I'm trying it out on a Linux system while I wait for the AIX system to be available. It's been a long road but I have finally gotten the install to finish 'successfully' however I can't connect from R/3.
When I run the check http://10.XXX.YYY.ZZZ:1090/ContentServer/ContentServer.dll?serverInfo from the browser on the Linux host I get back a good status as shown below:
serverType="SAP HTTP Content Server";serverVendorId="SAP AG";serverVersion="640";serverPatch="0";serverBuild="16";pVersion="0046";serverStatus="running";serverDate="2008-03-25";serverTime="22:39:45";startUpDate="2008-03-25";startUpTime="22:32:21";lastAccessDate="2008-03-25";lastAccessTime="22:38:33";
However when I do this from any my PC it won't connect. (Of course the real problem is I can't connect from R/3.)
If I try the same URL from a different user session on the same Content Server Linux host I get the same good status.
I thought maybe the httpd.conf file was wrong so I tried:
Listen 0.0.0.0:1090
In cs.conf I tried commenting out AdminSecurity & AdminSecurityGroup.
I also changed StorageDriver from SAPDBStorage to FSStorage.
I don't know if this is related or just another problem to tackle once I can get through this one. I was not able to add the new system to the Database Manager. I get the error "-4 could not connect to socket [10060]".
Thanks to all for any help. Points will dutifully be rewarded.
David

Hi Henk,
It looks like I am dumber than a rock. The firewall was indeed active on the Linux host. I turned it off and can now do the http connection test to the Content Server. (I awarded very helpful points.)
I still can't connect to the database with the Database Manager however the message has changed; it now says "-4 XSERVER might be inactive". I just turned off the firewall so I have a few things to try, like figure out how to start MaxDB without the DB Manager. I'll post my progress. Thanks Henk.
David
Edited by: Dave Hill on Mar 28, 2008 12:00 AM
Now I have installed the Database Studion on my PC. No I'm getting this message when I try to connect to the host/database on the Linux system: "Cannot connect to host 10.XXX.XXX.XXX:7210 [Connection refused: connect], -813."
Does MaxDB need to be started to connect? Any idea how to start it manually? Thanks,
David
Edited by: Dave Hill on Mar 28, 2008 1:06 AM
Ah, at long last. There's this tiny yet very important little program called x_server that SAP didn't include in the SAP Content Server install guide. This needs to be running in order for anything to connect. I'm sure most of you know about it but for the rest you can find it in:
/sapdb/programs/bin
Then type
./x_server start
I'm not sure what user it should run under but I started it as the sdb user.
You could automate the database startup with a script. See http://maxdb.sap.com/doc/7_7/e9/005dac1592496783e26133eb7fad0b/frameset.htm
Thank you Henk, I'll call this problem solved and award points.
Edited by: Dave Hill on Mar 28, 2008 2:10 AM

IPad 2 Wi-fi connection problems

I am lately encountering this problem with my internet wi-fi connection. It keeps dropping the signal. When I go to Settings to re-connect, it demands the password everytime. After entering the password, every single time there is the message: "Failure to connect" and on the second re-try it works. When I come home after work, the iPad does not automatically connects to the wi-fi. I have to connect it myself everyday then enter the password again and again.
After the connection, I can use my apps that require the internet (until the signal drops again) but there are no notifications from my apps. At the same time, I connected to the 3G internet and all my notifications appeared which were supposed to appear when I connected to the wi-fi. I have the iPad on recharge every night. The next morning when I check my notifications, most of them appeared at the same time (when the wi-fi was working fine). For example, I had a game update that such and such thing is ready 46 minutes ago when it should have been 3 hours before.
Someone suggested to try the "Forget this network" but there is no improvement.
To fix this, I have tried to restart the iPad. I have reset the network settings. Nothing helps
In short,
1) I have to enter password every time I connect
2) Signal keeps dropping
3) The notifications don't appear all the time from the internet apps. The real time notifications come intermittently or when I connect to 3G, they come instantly.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

IPad WiFi Connection Problems - WiFi Symbol Appears With Full Bars but I Don't Get A Checkmark?

I was using the iPad one day and then all of a sudden it stopped connecting to the internet. The network at this hotel is very good and I've asked them about their router so it is not the router's problem.
I go to the Settings and tap on Wi-Fi then I tap on the hotel network. After a few seconds, it says the network name beside the Wi-Fi tab and it gives me the WiFi symbol showing 3 bars. But then I never get the checkmark or tick saying everything is connected. I try going online and it says the iPad is not connected to the internet. I've tried an iPhone and it connected and got a checkmark in a few seconds. I've talked to the front desk and he took out his phone and showed me that he could connect, he even opened a page without any problems at all.
I've been trying to find a solution for this for a long time. I've been searching Google over and over again. I turned Airplane Mode on for 1 minute, I've tried Resetting my Network settings, I've tried forgetting the network and reconnecting again, I've tried removing all restrictions from the iPad, I've rebooted the iPad A LOT, etc.
So this is my problem for people who don't want to read the whole message:
1. I can't connect to the internet with the iPad
2. It shows the WiFi symbol saying its connected but I never get the checkmark or tick.
3. It's not the router problem.
4. I've tried other networks and it doesn't work. It just keeps on showing that loading circle right beside the network name.
5. Do any of you know what this problem is? Or do you have a solution?
Thank you for reading this and have a great day

Since you are in a hotel, some of these are not applicable.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Connectivity problem in SAP B1 8.8

Hi Experts,
I have taken database back up from 2007 b server.
I have installed SAP 8.8 server in another system with windows XP operating system and i restored the database backup.
Then i upgraded the database with PL 16 file.I installed client in the same system.
Now the server is accessible from same system but when i connect from other system clients internal error 1102 is occurring.
I have checked all the prerequisites.And there is not connectivity problem.
All .net frameworks are installed in my system up to 3.5 and in client systems.
And windows installer also.
even i checked firewall and gateway.
Microsoft SQl native client is also installed in both systems.
Please help me.
Thanks in advance.

Thank you RAHUL MOUNDEKAR ,
But i already stopped firewall in both server and client system.
And i have read one post in forums.that by setting ipcredentials in configure security of licence manager
we can solve the issue.
But my problem is that i am unable to set ipcredentials(instead of domain name i have given ip addtress).It is saying that "setting dbcredentails is failed. error -1102 ".
Is this the main cause.
And i am using SQL Server 2005 express edition.
Is there any difference between enterprise edition and express edition of sql server.
Please help me.
Edited by: vivek.Y on Jun 3, 2011 12:55 PM

TS1702 I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to rein

I have contacted EA about this and can find no help. I had this Scrabble on my iPad2 and began to have connection problems, it would lock in the "connecting" position. This is not the first time Scrabble has had problems with interface. Typically customers delete the Ap then download it again to reinstall it. During the process you sign in and approve the purchase KNOWING that another window will open saying that you have previously purchased it and that there is no charge. So what happened this time? It will not connect and all of my saved and current games are wiped out. I want my money back, this game interface is pretty junk and operates like some ancient DOS program,,bug,bug,buggy. I want my money back.

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

ABAP API Connection Problem

Hi folks,
I am working with the MDM ABAP API and there are some errors that do not make any sense to me.
Here is a list with the technical information:
MDM 5.5 SP 5 (5.5.40.83)
SAP NetWeaver 2004s (700)
MDM API 555/700
I have set up the Repository information in MDMAPIC, using a new created provider of the type CL_MDM_PROVIDER_55_SP05_PL00 ( MDM5.5 SP05 Patch 0, Server Build 5.5.40.79 - 5.5.40.xx ).
I then have tried to establish the connection to the server and repository and so on according to the HowTo Guides.
When I finished yesterday, I managed to connect to my local MDM Server and to retrieve the names of the mounted repositories, but I was not able to retrieve records from a certain repository. When I wanted to solve that problem today, I was not able to connect to my MDM server anymore. There have been no changes in the coding or the configuration since then, only the MDM server has been restarted and the repository has been reloaded. But apart from that, nothing has changed but still I am not able to establish the connection anymore ( Connection refused ). Then I have tried to connect to another MDM server, but there I get another error ( Connection is not trusted ), although I have rechecked a dozen times that there is the allow.ip with the proper ID of my SAP system and the according user in the MDM repository.
From time to time, the errors change without changing anything else, just by trying to execute it a couple of times. I have figured out, that sometimes I get an error out of the above mentioned provider class ( CL_MDM_PROVIDER_55_SP05_PL00 ). Is it possible, that the MDM API is not working properly with the PL00?
Hints are appreciated a lot...!
Thanks and best regards,
Sabine

Hi,
Check whether the server is down or not. If the server is down, u will get the same error message
regards,
Nikhil

Another CN001 Connectivity Problem

Similar Messages

Maybe you are looking for