Another conditions question

Hey All,
Can anyone tell me the correct syntax to build the following where clause in a condition statement?
I am trying to emulate WHERE QryGroup1 = y OR QryGroup2 = y against the BP table in a choose from list.
I used the same syntax as the example in the help files but if I use those two columns and any of my BPs match the second part of the OR statement it is returned everytime in the choose from list even if you type in a specific value or a letter plus the * character.
Any help would be appreciated.

Fixed by workaround from SAP support:
Hello Curtis,
This is a bug, the DI is misplacing the brackets. This is candidate to
be fixed in SP1. For the moment I have a workaround for you.
The workaround is to add third (dummy) condition, with AND relationship
after the 2 original conditions. you will see in the profiler that
the UI builds the query correctly and in the AddOn, the list shows
correct results.

Similar Messages

Create a new condition type, which reference to another condition type

I have a condition type Z002, which is reference to another condition type Z001 (Z001 is always negative, I have set the condition limit from -0.01 to -99,999,999), but with opposite sign.
User need to maintain only condition record for condition type Z001.
e.g. value for Z001 is -100, then value for Z002 is 100.
I have set Z002 reference to condition type Z001, but how to setup so that they always have opposite sign?
Thanks.

Go to pricing procedure in t.code V/08. Against condition type Z002, maintain routine number 164 (Basis * -1)in the column Alternative formula for condition base value. If this routine is not available, you can develop one in t.code VOFM (you can get help from ABAP'er) with required logic and assign here.
Regards,

Another newb question: multiple virtual servers

Hi, I have yet another ignorant question. I have several unrelated web projects that I am working on, and I would like to be able to set up a virtual server for each one for testing purposes, such as: http://project1, http://project2, http://project3. Can someone tell me if this is doable, and if there are any tutorials/resources on this for someone who has 0 experience running a web serer? Sorry for being so ignorant!

Yes, it is doable.
You can setup virtual server either by IP or by name.
If you have one IP, and want to set them up by name (ex. http://project1, http://project2, http://project3) you can do so easily with this type of configuration:
<virtual-server>
    <name>mydomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.mydomain.com</host>
    <document-root>/www/domain</document-root>
</virtual-server>
<virtual-server>
    <name>myotherdomain</name>
    <http-listener-name>http-listener-1</http-listener-name>
    <host>*.myotherdomain.com</host>
    <document-root>/www/myotherdomain</document-root>
</virtual-server>
....The important part here is that
a) all virtual servers share the same HTTP listener
b) which virtual server serves the request depends on the $HOST request header send by the client. Sun Web Server does the matching for you. It will match $HOST vs. the virtual server's host attribute. Depending on which site you connect to the right virtual server will be used.
c) if the $HOST request header does not match any of the virtual servers, then the default virtual server defined in the HTTP listener will be used.
To create a virtual server, use the Admin GUI, access the configuration, and then add new virtual server. Or use the following CLI command.
wadm> create-virtual-server --config=myconfig --http-listener-name=http-listener-1 --document-root=/www/docs/myserver.com --host-pattern=myserver.com --log-file=../logs/myserver.com-error_logs myserverHost pattern will be used for matching. Some of this elements might be optional.
Hope that helps. And keep the questions coming :D
Edit: Also check the documentation
Using Virtual Servers in SJS Web Server 7.0

Condition Limit on the base of another condition

I want to create a condition A in the pricing procedure which should show percentage of another condition B which is a value. Then i want to limit that new condition to a minimum of 10% so if it goes over the limit in the order the order should not save.
Regards,
Shahzad

Hi
check the following link
[Gross margin Should not be less than 10% in Pricing procedure;
Regards
Srinath

Copy value of condition type to another condition type *Not Percentage*

Hi SAP community!
How can I copy the value of a condition type to another condition type in my pricing procedure? The rules are that these conditions are not Percentage. The calculation type is Quantity for the two conditions.
I want to copy the value of condition type PMIN (Minimum Price) to another Z condition type.
Thank you all

Hi Lakshmipathi;
In fact, there are two Z conditions that I need to have with the same value of the PMIN. I 've maintained my pricing procedure this way:
For the PMIN, the step is 320
For the ZPV1, the step is 920 and I put in "From " field 320 and in the "To" field 320
For the ZPV0, the steo is 925 and I put in "From " field 320 and in the "To" field 320
But when I looked the Conditions Tab in the sales order there is no value copied to the Z conditions.
In order to do this, my Z conditions do not need an access sequence assigned, right?

Another simple questions

Hello friends:
Another simple question: I need to learn things about Oracle on my desktop.
My machine runs Windows 98. Oracle has some desktop product of its Database Line?
For example: Oracle Personal?
And Oracle Lite? What's the main difference between Oracle Personal and
Oracle Lite?
Thank You
Gracias
Ing. Pablo Romero
CORDOBA ARGENTINA

1. I didn't know the answer to your first question, but I googled it and it says the item is the in-call audio boost.
http://forums.crackberry.com/f71/flag-icon-47659/
2. isn't this setting determined by the carrier? So it's not a setting in the phone, but when you call in to your voicemail you can change your options?

RE: possible glitch with conditional questions

I've been designing a form with mulitple conditional questions. On testing, a 'glitch' seems to be occuring. If i a) check and answer to a question which leads to a secondary conditional question, and then b) check a response in that conditional question, and then c) change the response to the original question, the response to the conditional second question remains. i think this may be due to the fact that once you check an answer in a single choice question, you cannot "unanswer" or uncheck the whole question, that is you cant "remove" the check all together.
Any workarounds?

I'm not quite sure I understand. Can you create a simple form illustrating the issue and send it to me. Please enumerate the exact steps that cause the issue.
Thanks for the clarification.
Randy

'Share Name ID' Terms and Conditions Questions

Sorry for the double post - I had originally, by habit, posted this in the Droid Razr forum, but realize now it would be better here.
I would rather have my Verizon number display my name than the generic "Wireless Caller" and the instructions for how toConfigure Share Name ID tell you how to do that. But my question has to do with the Terms and Conditions on that page which read:
Note the Terms & Conditions: Your use of Name ID Services is subject to the following terms and conditions. By submitting a name for display and disclosure to others you are affirmatively asking Verizon Wireless to give your name and wireless phone number to a publicly available directory for use and distribution and you agree and consent to disclosure and use of this information by third parties.
Can anyone tell me exactly what that means? Specifically, I have three questions:
Does it mean you are now in a public "white pages" type directory?
Does it mean your phone number will be shared with telemarketers?
And lastly, if you have chosen to keep your Customer Proprietary Network Information (CPNI) private and opted out, will using Share Name ID override that selection?
In another forum there's a lot of discussion about this and I'd like to be able to add some informed information as opposed to wild speculation.
So if anyone - especially a Verizon employee - can shed some light on what those Terms & Conditions mean (or don't mean), I'd appreciate it.
Thanks.

I just got an answer to this from a very nice Verizon employee named Ryan. For anyone else who is interested, he said:
The Share Name ID service allows your name to show a specific or customized name when calling another person. The directory the terms and conditions are referring to are databases that landline companies use to provide Caller ID service. Landlines and cell phones process Caller ID in different ways. When you call a cell phone, whatever that phone has your number saved is how it shows on the display. Landline phones do not typically have a locally stored address book, so they rely upon these databases to give a name to display. The directory that is being referenced are these databases, used solely for Caller ID. They are not publicly accessible and searchable like a White Pages.
Opting in to Share Name ID will not override the CPNI opt out, they are two separate entities, and Verizon Wireless will not give your information to telemarketers. The only thing that will change with using Share Name ID is that your name(or whatever you choose) will show up whenever you call somebody instead of a generic "Wireless Caller" statement. Your privacy is still very much respected, and no alterations will be made.

Windows 7 Another Preorder Question :)

Ok bestbuy.com has taken out the 108$ deposit and now the order is confirmed so does
bestbuy.com hold the Funds and use them when it ships or can i use the 108$ for something
else now since the order is done and i Can just put another 108$ in there for them to take it
out on 10/22/09 the release date or when it ships
i need to know if i can do this thanks

Well you can purchase either an upgrade or a full copy. Difference is, one has to be upgraded from a previous operating system (XP or Vista) and the other can do a clean install without the need to have a previous operating system. The Windows 7 Upgrade program provides you with an upgrade copy of Windows 7.
Adam
Best Buy Community - Retail, Americas
Forum Guidelines | Terms & Conditions | Community Guidelines | Blogging Guidelines
*Remember to mark your questions solved and click the star under the user's name to show your thanks!

ASK: Need another condition in Free Goods

Dear Expert ,
I was confused with SAP free goods, in our company is currently require two distinct methods of free goods
currently free goods which has been running is only one, that is standard condition NA00
Is it possible if I created a condition similar to NA00 again (Copy from) ? let say NA01
So user can maintain free goods by condition NA00 or NA01
The original item category that assign with NA00 is ZBNS, so I created ZBN1 also for NA01
Free goods Pricing for NA00 is NA000, and I created new pricing NA0001 also for NA01
I am still confused on the process Activate Free Goods Determination, because it has not been found distinguishing between NA00 and NA01
And same problem also when creating Determine Item Category For Free Goods Item.
I really appreciate for your help and share
Thanks & regards,
Danang

Hi Pradeep ,
Thanks for your response ,
ZBNS and ZBN1 is Item category for free goods, ZBNS is original one , and ZBN1 is just copied from ZBNS .
This is because I want to make two conditions for Free Goods, NA00 (std) and NA01 (new).
I want user can maintain on one of these conditions (NA00 or NA01)
If the user maintain at NA00, then when SO made, Free Goods item will appear with the item category ZBNS , and
If the user maintain at NA01, then Free Goods item will appear with the item category ZBN1 in SO.
Is it possible to do that ?
Thanks & regards,
Danang
Hi Danangpn
I have a question What is ZBNS & ZBN1 it is free goods item category?NA00 is a free good std condition type you cannot assign the condition type in item category determination.
Std Item category determination for Free goods
Sales DocumentItem categoryUsageHigher level item categoryDefault item category
ORNORMFREETANTANN
--Check Access sequence what tables you have assigned.
--Check maintain condition type which access sequence have you assigned for NA00 & NA01
NA00 is NA000, and I created new pricing NA0001
You have maintained 2 pricing procedures for free goods.check what condition type have assigned in both the procedure
--you can differentiate the free goods with key combination in VBN1
--enter the condition type NA00 or NA01 & select the key combination & maintain the record.
--Activate Free goods Determination
Regards
Pradeep

Workflow condition question

Whenever a new opportunity is being added, If the ExternalSystemId field is blank then go ahead and fire off the workflow action. If it's NOT blank then do not fire off the workflow
In the workflow condition, I have this
len(Field_Value('<ExternalSystemId>')) = 0 OR len(Field_Value('<ExternalSystemId>')) IS NULL
but it still fires off the workflow even though the external system id field has something in it.
Do you have any idea?
Thanks

If I understand your question, you would need to write your default expression in the field definition (read the Default value and post default behavior). There are no workflow triggers for create (new Opportunity).

Another BW question about filter in the query definition

Hi ,
I have another question about filter in the query definition.
<u>Question:</u>
Which of the following objects can be filtered in the query definition?
A. characteristic
B. Key figure
C. Structure
D. Units
E. Hierarchy
My answer is A,B,D,E.
The answer in the book is A,B,D
Can anybody tell me which one is wrong?
Thanks in advance,
Liu Jia

HI
1.The answer could be A,B,D.you can not apply filters on hierarchies
2.Whenever there is a change in Attribute data(like Location,Num etc...)that has to be reflected in all aggregates of the cube.Thsi can be done by running "ATTRIBUTE CHANGE RUN".
sri

Yet another standby question...

Hi gurus,
Please help to resolve the quiz. I have completed manual physical standby installation. It is up and running. I then decided to install Grid Control and to use Data Guard for the standby creation. I've successfully installed GC, deployed all agents, I can see my previous standbys, life is good in short. Now, when I am trying to create the second standby for my production database using the Data Guard I stuck on a logical question:
On the step 3 of Data Guard standby creation, there is a note, saying:
The instance name (also referred to as the SID) must be unique on the standby host.
Yeah, fair enough. But i can't understand what should I do next? I have:
db_name YELLOW - primary prod
db_name YELLOW - standby prod 1st
and i need db_name YELLOW - standby 2nd
But I can't create it on the same server where the first standby resides.. What options do I have? Do I need to create the second standby on another server? Do I need to kill 1st standby? Is there any way to avoid this conflict? I am confused. I have no equipment for TWO standby servers... I thought I can install there up to 9 standbys.. But it seems to be a problem.. And definitely, I cannot give my second standby other name than YELLOW as all my applications are strongly tied on db_name...
Friends, please clarify this if you can. I am kinda lost in here..
Thanks as usual,
Maria

well, that's a good question! :)
because I don't have spare server for the standby. the question is not about: 'should I or should not put more than one standbys in one server' , but more about: 'is there any way to put two standbys with the identical db_names in one server'. I know that I probably sound unprofessional, but I just wanna know.. If the answer is 'no way', I will kill the first standby then and recreate the second one using DG with the correct name.
Thanks for writing to me,
M.

Re: another build question! (sorry lol)

Hi all
right, after days and days of researching all the excellent articles on here ive had to write a post! So apologies for going over old ground
Im going to build a new CS5.5 rig (having had a guts full of Apple and their FCPX fiasco its back to pc!)
so although i appreciate the 990x o'c is prob best option, bang for buck is leading me down the sandybridge i7 2600k o'c option on p67 mobo with 16gb of ram (option to take to 32 down the line when the chips are out)
anyway, im sorted on chip mobo (msi big bang marshal p67), nivida 570 etc , its the drives im struggling on!! Im edit avchd video and some after effects, small amount of 3d, and in FCP i always transcoded everything to prores. Now on cs5.5 it looks like real time performance is possible with high end hardwear.
So mobo, ram, and chip aside, my HDD config im unsure on, ive not really got the cash to go crazy with raid controllors etc, but understand need for seperate drives, etc and tbh might even go downt he cineform route as a prores alternative (prob avoiding hassles of drive speed with avchd)
im thinking as the SSD's are now dropping in price and the ocz are producing these 500 mb r/w speed sata 6 120gb drives for a reasonable price, would 3 of these drives (one for os, one for media , one for scracth disk ) be a good set up or is it a waste of cash and should i raid 0 from bios/mobo?
I appreicate that 120 gb drives for media etc are small, but i would take project media from another much large backup drive and just use the 3x ssd set up as working disks for editing & os? once project over, clear out drives to larger back up and start new project!
Its either that or i go SSD as bootdrive, but some sort of cheap raid set up for my scratch disk, media drives? prob is if i do that, from what ive read (brain dead now) i would be best off with 2 x raid 0 as scratch disk and orginal media respectively when workign with avchd
HOWEVER, on my mobo there are only 4 sata 6 ports, so if i use one for ssd boot drive, and then im left with 3 x sata 6 ports and another 4 x sata 3 ports to raid on? how does this work? any point in getting the sata 6 drives as one would be stripped with a sata 6 drive plugged into a sata 3 port (this was my reasoning behind using 3 small sata 6 ssd's plugged to the sata 6 ports and rest of sata 3 ports as storage and backups!
confused lol!! I just want the overclocked sandybridge system with decent gpu card, as much ram as possible at present, but im thinking my bottleneck will be in the HDD config! any suggestions are much appreicated! im not that techy so whilst have read all the articles am more confused now (plus normally a mac user, so its out of the box configuration usually!) for what its worth looking to purchase something from scan uk in terms of parts! total build cost including a reasonable screen £2,000
many thanks

You have a limited budget, especially in the UK, but then don't we all?
Going for the 980X will triple the cost of the CPU, but even when editing AVCHD material the gains are not sizable enough IMO to justify that cost differential. Add to that you will need 24 GB instead of 16 GB and that carries an additional price tag. Both factors will easily move you out of budget range if you want to have a number of disks and possibly a raid controller.
Did you read my article To Raid or not to Raid, that is the question. It can be found under the Overview tab at the top of the page? (Currently responding from abroad on my notebook and not having the bookmarks available for easy linking). http://forums.adobe.com/thread/525263
With media and projects I would advise against a raid0, because of the lack of redundancy. For pagefile, media cache and previews (scratch disks) raid0 is quite OK. They will be recreated if needed. The performance gain from a raid0 for media and projects over a parity raid is easily offset by the time spent on making backups. For parity raids do not use WD Caviar Blacks, but look at the Hitachi 7K3000 line of disks.
The question of Sandy Bridge versus the old X58 platform is essentially one of 'which limitations are acceptable to me'.
The Sandy Bridge is a great processor and at least the equal to the old i7-9xx quad cores. However, the platform, the chipset, has its shortcomings in terms of PCIe lanes. Whether that is relevant to you, only you can decide. But hey, we would be in serious trouble if Intel did not manage some progress in two years time from the i7-920 to the i7-2600K. So of course the i7-2600K shows much more potential than the almost retired 920, it is the chipset for the Sandy Bridge that is 'flawed' in comparison to the X58, but that is no surprise, since the Sandy Bridge is a 'middle-of-the-road' platform and the X58 was a 'high performance' platform.
BFTB-wise I think that within your budget limits, you should look at the i7-2600K, but with the best disk setup you can afford.

Another vibration question

Hello All,
I’m new here on the forum but I’m using Labview for a several years now (mainly as a user, not as much as a programmer).
Now I’m working on a multichannel vibration project and ran into some problems.
The thing I want is a 3 or 5 channel (option differs per measurement) vibration velocity measurement with a FFT spectrum (per channel) from 5 upto 1000 Hz and a RMS value measured from 10 upto 1000 Hz. (so velocity in mm/s vs frequency in Hz).
Both values need to be shown in a chart and as a value and on request (via a knob) to be stored in a txt file.
I tried several existing vi’s but never got one working right.
I’m using a cDAQ 9188 with 2 NI-9234.
Accelerometer (IMI) with a sensitivity of 100 mV/g.
Problem is, sometimes I get the spectrum working another time the only the RMS value.
Sometimes the storing of the values is the problem.
Can anyone assist me in this?
Labview version is 2011 FD.
SVMS 2010.
The example is one of our sister organisations.
Regards,
Mourik
Attachments:
Vibration FFT.JPG ‏300 KB
Vibration RMS FFT.JPG ‏284 KB

I see the jpg images with blank graphs, yet do not see any code.
The Order Analysis VIs, which I presume you are using from SVMS 2010 tools, require continious data. If you are starting and stopping DAQ with small blocks of data, that may be one explanation as to why there are no results. Try a continious acquisition.
Preston Johnson
Principal Sales Engineer
Condition Monitoring Systems
Vibration Analyst III - www.vibinst.org, www.mobiusinstitute.com
National Instruments
[email protected]
www.ni.com/mcm
www.ni.com/soundandvibration
www.ni.com/biganalogdata
512-683-5444

Another conditions question

Similar Messages

Maybe you are looking for