Another date issue with E52

Hi,
I have a really annoying problem with Nokia E52. The date is not automatically update. When I wake up every morning, the date still remains yesterday, though time still runs well. I have to switch the phone off and then switch it on and only then the date is updated. I don't want to switch it off and on every morning like this.
I have checked the option Automatically update date and time already. I also update the software to the latest version but the problem hasn't been solved yet. Anyone can help me?
Thanks!

I am having same issue. But I solved it by selecting Automatic time update ON. So when I turn on E52 in the morning it still has old date but in second update it with right one from mobile network.
This bug is connected with 16GB card - when I remove it it works fine. Also if I have alarm pending than this bug is not present.
Check if your mobile provider support automatic time update.

Similar Messages

FYI - High precision data issue with sdo_anyinteract on 11.2.0.3 with 8307

For anyone that may happen to be experiencing issues with SDO_ANYINTERACT on 11.2.0.3 with high-precision geodetic data, I currently have a service request in to fix it.
The issue we have is with locating small polygons ("circles" from 0.5"-4") in the 8307 space. The metadata we have specifies a 1mm tollerance for this data, which has worked fine since (as I remember) 10.1. Support verified it works fine up to 11.2.0.2, then is broken in 11.2.0.3.
So if you are pulling your hair out - stop. ;-) The SR# is 3-5737847631, and the bug# (will be) 14107534.
Bryan

Here is the resolution to this issue...
Oracle came back and said what we have at that tolerance is unsupported and we were just lucky for it to have worked all these years. They are not going to fix anything because it technically isn't broke. We pointed out that the documentation is a little unclear on what exactly supports higher precision, and they noted that for future updates.
When asked if they would entertain a feature request for a set of high-precision operators (basically the old code) in future release - they basically said no. So for the few items that we much have higher precision - we are on our own.
What still makes us puzzled is that apparently no one else is using high-precision data in lat/lon. Amazing, but I guess true.
Anyhow, here is what we used to use (up to 11.2.0.3) which worked fine at a 1mm tollerance:
Where mask_geom is:
mask_geom      :=
         sdo_geometry (2001,
                       8307,
                       sdo_point_type (x_in, y_in, 0),
                       NULL,
                       NULL);
SELECT copathn_id
INTO cpn
FROM c_path_node a
WHERE     sdo_anyinteract (a.geometry_a2, mask_geom) = 'TRUE'
       AND node_typ_d = 'IN_DUCT'
       AND ROWNUM < 2;Basically this finds indexed geometry and compares it to a single mask geometry (a simple point for the x/y given). Only one row is returned (in case they overlapped duct openings - not normal).
Since this no longer returns any rows reliably for items less than 5cm in size, here is our work-around code:
SELECT copathn_id
INTO cpn
FROM ( SELECT copathn_id,
                 node_typ_d,
                   ABS (ABS (x_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.x))
                 + ABS (ABS (y_in) - ABS (sdo_util_plus.get_mbr_center (a.geometry_a2).sdo_point.y))
                    distdiff
            FROM c_path_node a
           WHERE sdo_nn (a.geometry_a2,
                         mask_geom,
                         'distance=0.05 unit=m') = 'TRUE'
        ORDER BY distdiff)
WHERE node_typ_d = 'IN_DUCT'
   AND ROWNUM < 2;Essentially we use sdo_nn to return all results (distance usually is 0) at the 5cm level. At first we though just this would work - then we found that in many cases it would we return multiple results all stating a distance of 0 (not true).
For those results we then use our own get_mbr_center function that returns the center point for each geometry, and basically compute a delta from the given x_in,y_in and that geometry.
Then we order the results by that delta.
The outer select then makes sure the row is of the correct type, and that we only get one result.
This works, and is fast (actually it is quicker than the original code).
Bryan

Posting Data Issue with IDOC Type : COND_A03

Friends,
I'm posting the data from Middleware(Message Broker) to SAP using the IDOC Type : COND_A03 with Message Type : COND_A.
For this IDOC,I'm populating the below Segment's data.
Segement :E1KOMG:
Fields:
KVEWE,KOTABNR,KAPPL ,KSCHL,VAKEY ,KONDA,MATNR .
Segement :E1KONH:
Fields:
KNUMH,DATAB,DATBI
Segement :E1KONP:
Fields:
KSCHL,STFKZ,KSTBM,KSTBW,KRECH ,KBETR,KONWA,KPEIN,KUMZA,KUMNE,MXWRT,GKWRT,ZAEHK_IND ,KBRUE,VALTG,
VALDT,ANZAUF,MIKBAS,MXKBAS,KOMXWRT,KLF_STG,KLF_KAL
Problem: In SAP, IDOC's are processing successfully with status 53 and updating the tables : KONH,KONP successfully.
But Table A957 which is passing against KOTABNR field is not pupulating with the Materials passing.
Can anyone please guide me why the Materials are not populating in the table : A957.
Regards,
Sreeram

Hi,
I guess there might be some issue with VAKEY population.
All the key fields in A957 should be concated properly while populating VAKEY. (Leading zeros must be prefixed to the material)
Regards,
Ganga

TIFF export date issue with 40D images

Hi.
I have a strange issue with Aperture 1.5.6, Leopard 10.5 and Canon 40D RAW images.
The problem is this:
1) Import a 40D RAW image in aperture.
2) The exif image date is 13.11.07 20:21:10.
3) Then edit the image in Adobe Photoshop CS3 (TIFF).
4) Now we have two version of the image: the original RAW file and a TIFF file.
5) Export the two images with aperture to JPEG files.
Now the exif date/time of the image exported (RAW) is 13.11.07 20:21:10 and that's correct.
The problem is that the time of the second image (TIFF) has exactly two more hour ( 13.11.07 22:21:10 ).
In aperture the date/time is correct for both the images.
Someone can please try to replicate this issue?

Thanks for your reply.
1. I select the photos from iPhoto - varied between 5 and 20 (ran different test)
2. Click on FILE
3. Select EXPORT
4. Under the FILE EXPORT tab I have tried all the various options with no success
5. KIND - I make sure they are JPEG files - I have tried the Original also which is actually JPEG files
6. JPEG QUALITY - I have tried all 4 options from LOW to MAX
7. SIZE - I tried all 4 size options from SMALL to FULL
8. FILE NAME - I use filename
9. Select EXPORT tab
10. I export to the thumbdrive and I chcek and they are on the thumbdrive
11. I also tried to EXPORT to the desktop and copy them to the thumbdrive
I click on the photos on the exported images I placed on the thumb drive and they come up fine on PREVIEW on my MAC. No prroblem with the images until I try to use them on the plasma. I go back and use images from iPhoto 06 that I did not call up with the "08" program and they work fine.
Hope that explains what I do. Thanks again

Dates issue with BAPI_NETWORK_MAINTAIN

Dear Frens,
I have issue with dates in the activities and in the header of network while using BAPI_NETWORK_MAINTAIN. I am creating a new network with the deleted activities of an already
existing network. The network is being created with the activity early_start_Date and finsh dates as
sy-datum and the network header has early start dates set to sy-datum.
While passing values to the table parameter I_ACTIVITY of the BAPI , the dates are as available in the
existing network. But for unknown reason, The newly created network dates are with the today's date.
Can any one please let me know the possible reason for this.
Also every time I create a new network with multiple activities the new network is being created without first activity of the set of activities to be created.
Here also the table parameter I_ACTIVITY has all the activities that are to be created for new network.
I appreciate your quick response on this.
Regards
Priya

Hi Lakshmi,
I was able to solve the problem but not by the answer you gave. I had to write a WAIT up to 3 seconds after commit and that updated the table.Thanks anyways
Regards,
Dishant

Yet another export issue with Aperture 3

Judging by a search of topics, there seem to be a myriad of problems associated with getting files out of Aperture, some of which represent occult setting issues, others which seem to be actual bugs. I've run into an issue which seems to defy categorization, and I'm not sure if it's me doing something wrong, or if it is actually yet another bug with this software. I've been an Aperture user since 1.0 and I have to say the current version I'm running (3.4.3) is by far the worst yet. Anyway, enough whining. Here are the issues:
I'm running Aperture on a 6 core Mac Pro with Lion 10.7.5. There are two thing happening.
1. Exporting JPEGs is INCREDIBLY slow - perhaps as long as 4 or 5 minutes for a 3MB file.
2. This is the one driving me batty right now. Tried exporting a batch of images as JPEGs at the 50% original size setting. The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2. They are 80-100MB in size. When I export the images to a file on my Desktop, it consistently exports 6- 10 KB thumbnails. I've checked and rechecked my export settings and can find nothing amiss there. Has anyone else had a similar experience? Could the view I'm working in have anything to do with this? I work 95% of the time in split view.
Thanks,
Russ

I agree that there re a lot of posts about exporting, but a very large number of them refer to the same thing, and it's not a bug, but rather a misunderstanding.
For instance:
Tried exporting a batch of images as JPEGs at the 50% original size setting.
Okay.
The master files are large 16 bit TIFF images from Nikon D800 RAW files, post-processed in Nik HDR Efex Pro 2
Not relevant.
They are 80-100MB in size.
Not relevant either.
Why?
Because size refers to the dimensions of the image. So a 1,000 x 1,000 pixel image exported at 50% will turn out as 500 x 500 pixels.
Were you expecting a jpeg between 40 and 50 MB? That's Jpeg quality or the amount of compression applied to the image. And as you're compressing a lossless format (tiff) to a lossy one, and one with an aggressive compression algorithm, he resulting Jpeg, even at high quality, will be much, much smaller, more likely in the 6 - 8 MB range.
That's the nature - and indeed the point - of Jpegs.
So, if you're getting 6 - 10 kb images, you're exporting at a very low Jepg Quality.
This may also explain why it's taking so long to export. Getting rid on 99.99% of the data and compressing into 10kb is always going to take time.

XMP data issue with mixed up audio

I have a lot of xdcam (+similar) footage in a rather large project.
We move the project around a fair bit to different systems/editors etc.
A couple of times we have had audio in some of the footage all muddled up. Not in sync at all, in fact as if
a time displacement effect has been placed on the audio. Really weird!
I sorted through the forum and found others had the issue and a fix was to delete all the cache files.
This did not work for me and after alot of trial and error I found that if I deleted the .xmp file associated with the media and then reopened project and relinked
all was fine, back to the way it was.
As a precaution to not have to check all cut programs each time we change systems I'm thinking of deleting all .xmp files associated with the media each time as a precaution.
My question is this:
If I turn off "Write XMP ID to files on import" will this solve my problem? Why is this function needed?
Would I turn off "Enable Clip and XMP Metadata Linking aswell?
Basically my project is huge and important, I can't afford to have a corrupt .xmp file placing egg on my face.
Thanks in advance

Shrinivas,
You mentioned PIRs in your most recent post, which you hadn't mentioned previously. I won't address that topic in this post; PIRs and Dependent requirements are completely separate objects and troubleshooting is quite different. In APO, DepDmd is the equivalent of an R/3 reservation. It is usually linked to a planned order.
Unfortunately, SAP didn't do a very good job in CCR with reservations. Note 508667 speaks about manual reservations, but I have had the same problem with ProdRes (which are not manual) and I solved it following the instructions in this note. You basically delete the orphaned objects using SE37 to execute Function Module /SAPAPO/DM_RESERVATION_DELETE. Although the note refers to old APO releases, Note 573091 (release independent) still quotes this method. Sheesh, you'd think they woulda fixed this by now.....
Another thing to try when all else fails: virtually any type of order in APO that still exists in LiveCache can be manually deleted if you know the GUID. Look up the GUID using the LiveCache data browser (/SAPAPO/OM16). Then plug the GUID(s) into program /SAPAPO/OM_DELETE_INCON_ORDERS..
Rgds,
DB49

Data issues with the Rzzr

I recently bought the droid Razr and have had some issues. First off I seem to get a decent amount of data connection disconnects. Also when I live on Long Island and work in Manhattan. Where I live I only get 3g and the connection is slooooow. In Manhattan I get 4g and the connection varies from 12mbps to 32 mbps. 3g in my house I get around 0.67. Meanwhile my daughter has a droid X and is pulling 12mbps on 3g. **bleep** is up with that? Although something just dawned on me. It may be possible when I tested the connection she was connected to wifi. I'll have to recheck that. But I still have an ultra slow connect on the Razr with 3g and enough disconnects on my phone to drive me insane. Imagine when I try to watch a movie on HBO Go. Any insight? Thanks.

RobFurious wrote:
I recently bought the droid Razr and have had some issues. First off I seem to get a decent amount of data connection disconnects. Also when I live on Long Island and work in Manhattan. Where I live I only get 3g and the connection is slooooow. In Manhattan I get 4g and the connection varies from 12mbps to 32 mbps. 3g in my house I get around 0.67. Meanwhile my daughter has a droid X and is pulling 12mbps on 3g. **bleep** is up with that? Although something just dawned on me. It may be possible when I tested the connection she was connected to wifi. I'll have to recheck that. But I still have an ultra slow connect on the Razr with 3g and enough disconnects on my phone to drive me insane. Imagine when I try to watch a movie on HBO Go. Any insight? Thanks.
Hello to all community members! Thanks for engaging on this topic. RobFurious, I would like to help resolve your connectivity issues. I noticed that you haven't been back to the forum since posting this. I hope that you do return to become a part of this great forum, particularly to let us know if this matter was fixed. Please let me know if I can help at all. Thanks again!

Data Issues with New Curve 8900 on ATT

Hi, I just got this Blackberry Curve 8900 yesterday for ATT, and it's my first Blackberry. Everything was working fine up until earlier today when I realized that my data wasn't working properly. The data will work with certain apps, but certain apps with also not connect. My e-mail and BB Messenger also will not connect. The only way for me to get them to work is if I connect to wifi, but other than that on my EDGE the majority won't connect.
Here is a list of apps i've compiled that shows what works with what:
-Works with Data & WiFi-
BB Browser
iheartradio
FML
poynt
-Won't Work with Data but will work with WiFi-
BB E-Mail
BB Messenger
BB App World
Facebook
Twitterberry
Myspace
Google Maps
I went to Manage Connections, and Mobile Network Options and my data is set to on, and i've done muliple battery pulls to no avail. When I turn on my WiFi all my emails and alerts that I missed come rushing in. For example I resent a Service Book to my device and I did not receive that until my WiFi was turned on. My "EDGE" is in capital letters so i'm receiving data.
Can someone please help me solve this frustrating topic? It really is mind boggling.
Thanks!
Stephen B.

You have a BlackBerry Data plan right? I'm assuming so since it works sometimes
Also if you notice when the Wi-Fi is off, if you go into Manage Connections | Service Status does the BlackBerry Internet Service say it's connected to the Mobile Network? Or if you go into Mobile Network Options can you run a Diagnostics Test and see if it sees that your data is connected?
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

Data issue with Navigational Attribute in the report

Hi Experts,
We have a report which has Material and Material Group in the report. Material Group is a navigational attribute of 0Material. We have some 31 material groups in the ODS. However, the report is diaplaying only 3 material Groups. If I use Material Group directly( not as an attribute of material) then it is displaying all the 31 material groups correctly.
We have a hierarchy which is loaded through Flat file on Material Group. We need the hierarchy to be displayed for all the material groups in the ODS. Please let me know what could be causing this issue?
Thanks and Regards,
Kavitha Jagannath

Hello Kavitha,
Check if the Material Masterdata is having these Material groups. If not then load this Material masterdata and activate it.
As your query is using Material group as Navigational attribute then the data should come from this Material Masterdata.
If your Material has only 3 of th eMat Groups then report will show only 3. Better update this Material masterdata.
Regards,
Pratap Sone

IPhoto to Lightroom date issues with Masters

Hi,
I'm trying to export my iPhoto library into LR5. After reading the forum, and following relevant info about ways to import, I have a weird thing going on with some photos.
Some photos on LR (from 2005) show as being imported as Today's date. When I ask iPhoto (directly or via Master export manually) to show items in Finder, they also show today's date as created. But. When I click Info on iPhoto's event, it shows all the correct dates. Only there.
I've tried the iPhoto Export tools, Aperture and the original masters directory. Any idea what's going on?

Some are from a digital camera (attached specs). Some from an old camera phone.
One with camera (this is imported as 2009)
From a phone (this is imported as 2013 and has no meta data)
I tried exporting as Current, but that made no difference. Are you suggestng, I adjust dates from iPhoto to what its suggesting, and modify original files and then export?

Date issue with oracle

Hi All,
which one I should assume correct one, is there any way to find the correct date.
The following function returns 08/01/2097
select to_char(maturity_dt, 'DD-MON-RRRR HH24:MI:SS') from Product_bak where product_id = 11671877
The following function returns 08/01/1997
select to_char(to_date(maturity_dt, 'DD-MON-RRRR HH24:MI:SS'), 'DD-MON-RRRR HH24:MI:SS') from product_bak where product_id = 11671877
The data type of the col maturity_dt is date.
Regards,
aak
Edited by: user605246 on Jan 6, 2010 2:28 AM

Hi Massimo,
Sorry i disagree, it does nto have to do with 2 or 4 digit year but with if the nls parmater is YY and RR.
Here is what i have:
select * from v$nls_parameters
/* o/p*/
PARAMETER     VALUE
NLS_LANGUAGE     AMERICAN
NLS_TERRITORY     AMERICA
NLS_CURRENCY     $
NLS_ISO_CURRENCY     AMERICA
NLS_NUMERIC_CHARACTERS     .,
NLS_CALENDAR     GREGORIAN
NLS_DATE_FORMAT     DD-MON-RR   /* year is still 2 digit */
NLS_DATE_LANGUAGE     AMERICAN
NLS_CHARACTERSET     WE8MSWIN1252
NLS_SORT     BINARY
NLS_TIME_FORMAT     HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY     $
NLS_NCHAR_CHARACTERSET     AL16UTF16
NLS_COMP     BINARY
NLS_LENGTH_SEMANTICS     BYTE
NLS_NCHAR_CONV_EXCP     FALSE
/* now run the select*/
select to_char(x,'DD-MON-yyyy') from test;
/* o/p*/
06-JAN-2010
05-JAN-2010
04-JAN-2010
03-JAN-2010So i still feel the o/p will have to use the format using RRRR
OP
Here is a intersting read for you to know the difference between the 2 date formats
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:96012348060
and
http://oracle.ittoolbox.com/groups/technical-functional/oracle-dev-l/difference-between-yyyy-and-rrrr-format-519525
Cheers!!!
Bhushan

CS5 update date issue with CS4 Student Licensing version

Before downloading the Flash Pro CS5 update, from Adobe's web-site, I called Adobe and asked this question, " Will the Flash Pro CS5 upgrade work with my Student Licensing version?" The answer I received (after being put on hold), was "Yes, the CS5 upgrade will work with my version of CS4."
However...after paying for and downloading the Flash Pro CS5, I am finding that it is not working. The serial number asked for, from my version of CS4, comes up as being not valid.
Any suggestions as to resolving this issue would be appreciated!
Thanks!
~BG

There are no restrictions against you using your student-licensed version of CS4 (either any of the suites or individual programs) for commercial work other than that you may not sell or otherwise transfer your license to anyone else.
- Dov

Can't get Typekit to work with localhost (also, another weird issue with copy+paste)

Hi!
I've searched through the other posts already, and I *think* I've tried all the solutions, but I still can't get the typekit fonts on my machine.
I'm trying to use the "orator-std" font. In the "kit editor", in the "kit settings -> kit settings" tab I have for name "localhost" (w/o quotes) and for domains just "127.0.0.1" (w/o quotes).
Then (AFTER saving the settings from that tab), I go back into edge animate, I start a new font by clicking that + sign next to "fonts", in the "library" tab. I set the "font fallback list" to ' "orator-std",sans-serif ' (w/ quotes, w/o single quotes), and then go back to the open browser and go to the "embed code", copy both lines of javascript, go back to edge animate, and... nothing. It won't let me change ANY text in this box anymore after the window loses focus. I have to press "cancel" and try again. So this time, I just type in the orator-std... blah blah, same as last time, but paste in the code successfully as it was already in the clipboard and I didn't need to make the window lose focus. Okay, so I click "Add font", and apply the font to my text. Nothing happens.
Huh... well the "Font's from T" picture is showing up in the bottom right of my screen, so that's odd. I go to preview in chrome, still ugly old sans-seriff there, also with the "Font's from T" logo in the bottom right.
I figure "okay, probably just takes a second... or a minute... or w/e like the message said." Well this was at least an hour ago, so something is still wrong.
I would love to just delete the font and start from scratch... maybe something got screwed up along the way and it would fix things to just start from scratch. Well... "sorry" says edge animate... can't let you delete that! In the "libarary" tab, there's only one font visible, it says "orator-std,sans-serif" (w/o quotes). If I right click it, the only option is "delete" and it's greyed out.
I tried doing one with arial instead of sans-serif just now, still not working, but everything shows up in arial now instead of sans-serif... so that's something I guess.
Apologies if this is just a simple problem that I'm just somehow not grasping. Please accept this legitimate bug report as payment... the er copy paste bug, I mean...
Thanks!
Trevor

Hi Trevor,
I'm sorry you ran into trouble here. Typekit can be used locally. However there are some necessary steps that if left out, will cause the fonts not to render. In order to use Typekit locally, you've got to:
1. Be running a local server when testing your site in the browser. You can tell if you're running a local server by the URL of the local site. If it starts with: file:// then you are just viewing the local file in a browser and not running it from a local server.
If the local URL starts with: http:// then you're running a local server.
2. The domain of your local server has to be part of the domain list in your Kit. So, if your local server uses: localhost, you'll need to add this to your Kit's domains.
I hope this helps. If you have any further questions, feel free to reach out to us directly: [email protected]
Cheers,
Benjamin

Another Possible Issue with NwSapSetup.exe ??

This is on SAPGui for Windows 7.20 when installed on Windows 7 front end.
Installation server is at Patch 8 with latest SapSetup_Patch.exe applied I am getting an error pop up at end of the install on the front end regarding NwSapSetupUserNotificationTool.exe
I have Customer Support Message opened: 0000773130 2011
Relevant log files are attached to it.
Bob H

Jude,
Were you running as a non-admin user (using LSH on the server for admin rights) ?
I'm getting it on every system I install on WinXP and Win7.
I tested running an install while logged on with local admin rights. DID NOT GET THE ERROR. So can you confirm this?
History of the installation server is: Started as 7.20 Patch 3, Patch 6 w/ Hotfix 3 was later applied, SapSetup_Patch.exe applied, Patch 8 applied and lastly latest SapSetup_Patch.exe was applied.
Check Server - Reports no errors.
The NwSapSetup.log file I provided with my Support message has a pretty clear entry when it happens.
Bob
Edited by: Bob Held on Sep 21, 2011 7:45 PM

Another date issue with E52

Similar Messages

Maybe you are looking for