Another Date/Time Bug?

I found now, that all my images from 10D and G2 have a wrong Date/Time Original in lightroom. It's shown one hour too early. All my other viewers show the correct time in exif data.
The images from my 30D otherwise are correct in lightroom.
What happens here?
Juergen

Ok, I looked a little bit deeper.
All my pictures from end of october until end of march have correct time in lightroom. Daylight saving time begins last weekend of march and ends last weekend of october in germany.
But I always change the time in my cameras on the first day after daylight saving time changes. It seems it hasn't anything to do with the camera model because I own the 30D only since last november.
Why doesn't lightroom only show the exif times from the files and is calculating something wrong by itself?
Juergen

Similar Messages

Date & Timer: BUG????

Description of what I need to do: Track time from a timestamp sent as a value in a service.
Description of how it is done:
1. create a new date object from the values sent in the service.
2. create a timer that tracks seconds
3. every 60 seconds increase the value of the date object by one minute
PROBLEM:
If someone changes the TIME ZONE properties in Windows the value of the time in the flex app is also updated, which makes no sense because the variable that holds the current time should be completely independent of the machine's date/time properties. This does not happen if the hour/minutes Windows properties are changed, only when the time zone is changed, which is too strange.
The application is a time clock for employees to clock in and out and so must not be open to manipulation.
WHY??? Is it something to do with the Timer class? What is the relationship of the flex app Date Object /Timer Class to the date/time properties of the local machine? Or, am I totally missing something.
I haven't included my code because its pretty mundane stuff but can if someone thinks it will help.
Thanks -- if anyone understands how this works.

Post an example.

Another DATE/TIME question

HI all
I am trying to INSERT INTO TABLE a date and time into one line..
excerpt looks like
CREATE TABLE Test
(Submit DATE );
INSERT INTO Test
VALUES(to_date('2001-01-02 22:23:00','yyyy-mm-ss hh24:mi:ss'));
I get an error message that says it's missing a comma (and I can't figure out WHERE). I have tried quotes in different places etc...Is it not possible to put a date and a time in the same slot?
Thanks in advance

Try this...
SQL> create table mytest (submitted date);
Table created.
SQL> desc mytest
Name Null? Type
SUBMITTED DATE
SQL> insert into mytest
2 (SUBMITTED)
3 values
4 (to_date('2001-01-02 22:23:00','yyyy-mm-dd hh24:mi:ss'));
1 row created.
SQL> select * from mytest;
SUBMITTED
02-JAN-01
HI all
I am trying to INSERT INTO TABLE a date and time into one line..
excerpt looks like
CREATE TABLE Test
(Submit DATE );
INSERT INTO Test
VALUES(to_date('2001-01-02 22:23:00','yyyy-mm-ss hh24:mi:ss'));
I get an error message that says it's missing a comma (and I can't figure out WHERE). I have tried quotes in different places etc...Is it not possible to put a date and a time in the same slot?
Thanks in advance

How to cell register the date/time when you put a value in another cell

Hello guys!
How do I get a cell (eg A2) tell the date and time when I put a value in another cell (eg A1) in Numbers?
For example, I want to register a cell to read my electricity meter.
I write in cell A1: 45809. When placing this value in A1, I want to appear (on A2) the date and time when I did that record automatically. Is it possible?
I hope you understood the question!
Thank you in advance to those who try to help.

There is not automatic time stamping of on entry of a time. One suggestion I've seen has a cell that has the current date and time. Everytime you cahnge any cell that cell will update. You can then copy that cell and paste the value into your date/time cell adjacent to the meter reading:
Create a new, plain table:
Now in cell A1 enter the formula "=now()" short hand for this is:
A1=now()
now resize the table so it is a table that is 1 cell by 1 cell by selecting any cell, then dragging the table size control in the bottom right corrner towards cell A1:
It should look like this when you have completed this task:
Now create another new, plain table and enter "Date" for cell A1, and "Meter Reading" for B1:
Now you can enter a meter reading (I entered "45671"). Now select the CELL that has current date and time from the first table at the very top, and copy:
Now select the cell in the date column where you want to put the current date and paste values by using the menu item "Edit > Paste Value":

Time and date reset bug

hu guys, recently ive been experiencing a time and date reset bug, sometimes when i open up my computer it says something like your date is set to (i forgot the exact date but the year is 2001) so i change it back to the correct time and date, im not sure how i got the bug, can anyone help me fix this problem, its beginning to be annoying. thanks in advance!!

Sherwin,
Those symptoms indicate that you need to get your backup (PRAM) battery replaced.If your computer does not retain parameter RAM (PRAM) settings when it is turned off, this generally indicates that the battery needs to be changed.;~)

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?

With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.

Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please???

Day of year bug - format date/time string and scan from string?

I've noticed that the day of year returned by "Format Date/Time String.vi" starts with a value of 1 for Jan-1 while "Scan from String.vi" wants a 0 index. Is this a bug or feature?
(I'm using Labview 2010 Service Pack 1)

I think the best idea is to use seconds since for your arithmetic, because it is going to be the most consistent and robust solution. Knowing that a day has 86400 seconds is all that is needed and you won't run in possible inconsistencies with date time implementations caused by our anything but logic calender. I would hazard that the functionality of converting a timestamp into year and day of year and back is impossible to make consistent without sacrificing other possibly conflicting transformation in the Timestamp into String and Timestamp from String manipulations.
"Seconds since" being the actual base unit in all LabVIEW timestamps, it is best to do any arithmetic on it in this base unit.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

BUG: LR 2.1 adjusts date/time back 1 hour

I'm really really annoyed. When I import images into LR 2.1, it changes the date/time of the image back by 1 hour - I assume its changing to standard time from daylight savings time. Why is this done? There doesn't seem to be a configuration option for this.

"CR Henderson - 4:40pm Nov 23, 08 PST (#35 of 35)
A work around that I have used since LR 1.0:
1. Set camera time to GMT and leave it there.
2. Take pictures and download them to PC hard drive.
3. Convert to .DNG using DNG Converter
4. Run ExifTool GUI on files and use XMP: DateTime copy from EXIF
5. Import into LR
#4 sets the XMP time to the EXIF time and removes the time zone offset, i.e. the XMP time is set to be the EXIF time with zero offset and since that is what I have my cameras set to things work out well. With the XMP time already set LR doesn't mess with it (or at least versions 1x-2.1 haven't).
It is possible the above will work for other RAW files supported by ExifTool GUI. I know it does with the Canon CR2 files I use (30D, 40D)."
Personally, having paid for the software, (it isn't freeware) I would like a FIX rather than a workaround. A little response from Adobe as to when it will be fixed would be appreciated, if it is not too much trouble?
The last Date / Time issue required purchase of a new version, I hope this will not be a trend in LR. As others have pointed out just writing and reading the EXIF time is not rocket science. It is just a matter of trying to get the LR programmers to leave it alone (since the beta!) and not keep messing around with it. There has never been any explanation of what they were attempting to accomplish by modifying EXIF Date / Time?

Date Time Original & Date Time Digitized bug

I have noticed that in Lightroom (1.1 or 1.2, doesn't matter) my photographs display WRONG Date Time Original & Date Time Digitized in the Metadata section. Both are exactly 30 minutes behind the actual time the photos were shot - eg., if I have shot a photo at 7:00pm, it will be shown as though it was shot at 6:30pm. Bridge correctly displays both this info. Any suggestions on how to rectify this info in Lightroom? Thanks,

If you are shooting RAW, take care with "Edit capture time". There is
evidence that it causes a rewrite of the RAW file by LR. This
kind of a rewrite is dangerous, sometimes causing corruption. See
this thread for a discussion:
http://www.adobeforums.com/webx/.3c0331a6
--Milt--

WARNING: Adjust Date & Time doesn't work

I bought Aperture 2.0 because I was thrilled they finally have an adjust date/time feature. The interface is great, but it simply doesn't work.
I was trying to adjust a batch of images by 30 seconds to get it in sync with another camera, however, it ended up adjusting it by 30 minutes!
I was trying to get the time to change from:
1:33:09 PM to
1:32:39 PM
and the image ended up at
1:00:33 PM
Anyone else had a similar problem or a solution for this serious bug?

I added my own topic earlier this morning. In my case, it's working just fine if my primary image is RAW and all selected images are also RAW (Canon 300D). It also works just fine if the primary and all selected images are JPEG (from either a Canon S3 or a Panasonic Lumix digicam). However, if the primary image is RAW (Canon 300D) and any selected images are JPEG (anything modified in iPhoto, or originally shot in JPEG from by Canon 300D), all **** breaks loose on those JPEG image dates.
I have some which went back a few months, but most of them jumped forward between 6 months and 2 years.
Again, something is severely broken with this function.
Anyone know how to get the original dates back? Please? I'm setting aside several hours tonight to restore the pre-2.0 backup, export my 2.0-only projects, and import those back in, just forgetting any changes I'd made to historical project files in the meantime. This really *****.

Stocks app date / time default

the stocks app seems to show the dates using the us time zone. How can we tell the app to actually look at the date / time setting default as set in the Settings -> General ?
E.g. Its 1feb here now , and the exchange is trading, however the Stocks app is showing that it is still 31 Jan..... Strange lazy coding ???

how can we set the Stokes app to use the timezone settings as in the general settings? Do not live in the US so. Would like to get updates in our timezone and not in the US timezone. Or is this another bug in the device?

DID YOU KNOW?? - ABOUT DATE TIME CONVERTERS??

Hi All,
DID YOU KNOW??
That the Creator IDE provides a set of converters that you can use to convert component data. If your input field is for numbers, then you most likely need a converter. Converters are also good for formatting dates, times, and currency values. The standard converters, which you can use are located in the Converters section of the Components Palette.
The Date Time Converter
A Date Time Converter Converts between java.lang.String values in your component properties and data types of java.util.Date. The conversion usually applies to the property of a component used to display values and to pick up values entered by users, such as the text property of a Text Field component.
An example is binding a JavaServer Faces component to to a database column of type DATE. When you bind a component, the IDE normally identifies the data type for you and sets the appropriate converter when you establish a binding to the value property. However, you can also add this converter manually by setting the component's converter property.
* Note: If you are using an Oracle database, use the SQL Timestamp converter instead.
Learn more :-
JDBC Type Conversions
http://developers.sun.com/prodtech/javatools/jscreator/reference/docs/help/2update1/connect_data/jdbc_type_conversions.html
Using Converters
http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/converters.html
We would like to know the following from you :-
1) Why and How are you using Converters in applications you are building?
2) Did you face any challenges while using them?
3) Did you find any cool ways of using these or build any cool custom converters?
4) Any feedback you might want to share about converters to make it easier in using them.
Thanks for all your inputs and for joining in the discussion.
K

did you know that sqlTimestamp converter returns value of java.sql.Date type if you are using sun's oracle jdbc driver. It will return the correct type if you use oracle's jdbc driver. Not sure why this happen, though. Bug?

Batch edit date & time in PSE 8 Mac/Bridge

OK, maybe it's jet lag. I uploaded all my vacation photos, and realized I had forgotten to adjust camera date/timezone. I remember that earlier versions of PSE Windows had the ability to batch adjust the date/time shot, but I can't find it in Bridge CS4 or PSE 8 Mac. I really don't want to do it manually for a few hundred photos. Is the capability hiding in there somewhere? thx

Thanks, Barbara. One of the utilities you mentioned -- PhotoInfo -- does have a very easy batch mode for date/time change. And, of course, so does iPhoto.
Unfortunately, they both run afoul of another detail: there are multiple date/time stamps stored in a JPG. iPhoto and PhotoInfo both read/write the CreateDate XMP metadata field, but Bridge and PSE appear to base "Date Created" on the value stored in the DateTimeOriginal EXIF field. I haven't tried GraphicConverter yet, nor EXIFtool, which definitely handles all timestamps but is command-line only. I have some tools on the Windows side that I'll try first.
rgds

Date & Time won't show in Menu Bar

I just installed the latest automatic update for Leopard and now in the right hand side of the menu bar only shows the Default Folder X icon and the Spotlight icon (my bluetooth, infared, airport icons and date & time are missing).
I go to the Date & Time preferences and click the option to have it appear, but when I close that window or just switch to another tab on that same window, it resets it back to being unchecked.
I know, of course, to unlock these settings and tried locking them or leaving them unlocked in hopes it would actually "lock in" my choice of settings, but with no such luck.
If anyone knows how to get my other icons back where they belong I'd appreciate that as well.

I actually don't use "Default Folder" at all, it came with Leopard.
But this problem didn't come up until the latest updates.
There was a file permissions error in running activity Monitor, though.
{quote}
+Follow this path in the Finder: /System/Library/CoreServices/Menu Extras/+
+and double-click on Clock.menu to add it to your menu bar.+
{quote}
Double-click didn't do anything, tried to drag it up there thinking (for some reason) that might work, but no luck there as well.
{quote}
+A Tiger reference but probably works for Leopard too: Menu bar reset+
+I had Default Folder on my OS9 computer but read some things about issues with the OSX version that made me decide not to continue with it, though I haven't read anything about recent versions.+
{quote}
No luck here, as well. Although the file I was supposed to delete in ByHost wasn't there, so maybe that has something to do with it.
Message was edited by: Raymei
Message was edited by: Raymei

On holidays we took pictures with two cameras and an iPad. I put everithing on my PC. Rearranged them by date, time and or subject putting a number in front of the picture name. I synchronised with my iPad and my pictures show in misselaneous order. Help

We took pictures during oue holidays with two cameras and an iPad. I put all the pictures on my PC and reorganized them by date, time and/or subject, By putting a number in front of the picture name. Then I synced with my iPad. All the pictures show in a misselaneous order. What went or did I wrong?

You did nothing wrong, but the photo app puts stuff in chronological order.
You can look for another app. Afraid I don't have one to suggest, but I do understand that other apps will sort photos differently.

Another Date/Time Bug?

Similar Messages

Maybe you are looking for