Another Failed CS5 Install in Windows 7

I have seen many users post similar problems as mine. The StartSrvice fails then the certain values aren't set in the database that lead to fatal SQL errors. The thing is CS5 had been installed  and running on this same machine before. I simply had to replace a drive that died. I used the Acer replacement disks to install Windows and then installed CS5. Now, with the same set up, the install fails. s
The fatal errors involve the failure of the installer to create the database begining with ArkServiceControl;SERVICE. I ran PC Doctor on the drive...in fact on the whole system and everything passed. Given that so many people have this problem it has to be the installer...at least the 64 bit installer although as I said, I installed and ran this prior to the drive going bad. That was a 1.5 TB WD drive abd this is a Seagate 1.0 TB drive.
I have installed this first with all background applications on and after uninstalling it, installed it with background apps off. I also tried disabling all non Microsoft services. (Just in casr there was a program or service that was stepping on the install process)
This is crazy and I have tried everything I can think of. Has anyone solved this issue? What does Adobe have to say about all of the problems users have had with the 64 bit installer? I have this expensive program but can't use it and I have a lot of editing to do.
EDIT: Actually even with the rrors including the FATAL ones, Photoshop opens. To me a fatal error means the install ends without completing. What effect do these error have on the performance or the capanilities of PS?
I am running Win 7 64 bit on an Acer 3450 with 6GB RAM)
This is the error log:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 12 fatal error(s), 14 error(s), 5 warning(s)
WARNING: 1 ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0
WARNING: TotalSize property not set in data base
WARNING: TotalSize property not set in data base
WARNING: TotalSize property not set in data base
WARNING: TotalSize property not set in data base
ERROR: Cannot open data base file D:\Adobe CS5\payloads\AdobeFontsRecommended-mul\Install.db
ERROR: Cannot fetch entries from Assets table
ERROR: Cannot open data base file D:\Adobe CS5\payloads\AdobeFontsRecommended-mul\Install.db
ERROR: Cannot fetch entries from Assets table
ERROR: Cannot open data base file D:\Adobe CS5\payloads\AdobeFontsRecommended_x64-mul\Install.db
ERROR: Cannot fetch entries from Assets table
ERROR: Cannot open data base file D:\Adobe CS5\payloads\AdobeFontsRecommended_x64-mul\Install.db
ERROR: Cannot fetch entries from Assets table
ERROR: The following payload errors were found during install:
ERROR:  - Recommended Common Fonts Installation x64: Install failed
ERROR:  - AdobeHelp: Install failed
ERROR:  - Required Common Fonts Installation x64: Install failed
ERROR:  - Required Common Fonts Installation: Install failed
ERROR:  - Recommended Common Fonts Installation: Install failed
FATAL ERROR: sqlite prepare: 'SELECT * FROM Property WHERE propertyName='TotalSize'' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Property WHERE propertyName='TotalSize'' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: Cannot create extract assets at 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{CBDD7465-CE11-4A58-9497-C370B65923F1}' from zip file 'D:\Adobe CS5\payloads\AdobeFontsRequired-mul\Assets2_1.zip'. Error 23 Data error (cyclic redundancy check).
FATAL ERROR: sqlite prepare: 'SELECT * FROM Property WHERE propertyName='TotalSize'' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Property WHERE propertyName='TotalSize'' (21) disk I/O error
FATAL ERROR: sqlite prepare: 'SELECT * FROM Assets' (21) disk I/O error
FATAL ERROR: Cannot create extract assets at 'C:\Program Files (x86)\Common Files\Adobe\Installers\adobeTemp\{7F9C94CD-0BAC-4F8F-8990-6A5886F4D550}' from zip file 'D:\Adobe CS5\payloads\AdobeFontsRequired_x64-mul\Assets2_1.zip'. Error 23 Data error (cyclic redundancy check).
Message was edited by: randyd42

The original install was on a newly created Windows system so there wasn't anything to uninstall. Then I ran the MSFixIt that reported no problems. The uninstall from when I did have the failed CS5 install cleaned everything out. My system is working. I installed my NIK software and it's seems fine. I don't know what functionality I am missing because of the install errors.
Hopefully someone will know!
Thanks!
Randy

Similar Messages

  • Update KB2685811 fails to install on Windows 7 64bit

    Update KB2685811 fails to install on Windows 7 64bit FROM WINDOWS 8.1

    Hi,
    Based on my research, this update package only applies to Windows 7 and Windows server 2008 R2. Windows 8.1 doesn't support this update.
    If you need any further assistance, please feel free let us know.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Windows Search Service failing to install on Windows Server 2008 R2 Terminal Server

    Hi,
    I am unable to install the Windows Search Service on a Server 2008 R2 Terminal Server. I want to install this to enable indexing options within Outlook 2013 for all users.
    Server Manager > Add Roles > File Services > Select only Windows Search Service > Install.
    The error I receive: "Attempt to configure Windows Search Service failed with error code 0x80070057. The parameter is incorrect."
    Thanks,
    Bjorn

    Hi,
    I did the test and could install the Windows Search Service without problem.
    Which role did you installed on the terminal server?
    Did you try to install it on another windows server?
    Regards.
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • ITunes 11.1.3 download fails to install for Windows XP

    Currently have iTunes 11.1.2.32 installed on a Windows XP SP3 PC. Control Panel lists version as 11.1.1.?. After downloading 11.1.3 install fails because "older version can't be removed". Uninstall of older version from Control Panel also fails.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Itunes 11 failing to install on Windows 8.1

    I recently tried to update my Itunes prompted by Apple Update program. Since then Itunes fails to install. My question is why did Aplle prompt me to update a software package that will not work when the initial version was working fine.
    I did not see any need for updating and now I can not synchronise my iPAD with my PC.
    I notice similar problems from many people.
    Can someone at Apple please provide a working solution to this problem

    Though I am not from Apple, I can provide you with another user's very helpful page: Troubleshooting issues with iTunes for Windows updates

  • Kb2920189 fails to install on Windows 2012 R2 Essentials

    Hello,
    I have a 2012 R2 Essentials server that fails to install the UEFI KB2920189 update.  All other updates installed fine.  It's running two disks, one has 8.1 the other has 2012 R2 Esssentials in dual boot mode.  No VM.  I have heard reports
    of successful installs of this kb2920189 update that basically bricks the OS on reboot.  I would like to avoid this.  The error code during the failed installation is 800F0922.
    Thanks

    Hi,
    Based on your description, I understand that you failed to install KB2920189 with error 800F0922.
    Please refer to following operations and check if can help you to solve this issue.
    Refer to the KB (KB947821), and use the inbox Deployment Image Servicing and Management (DISM) tool. Then install
    this update again.
    Please
    reset Windows Update components and monitor the result.
    Please perform a
    clean boot and check if you can install this update successfully.
    If this issue still persists, please navigate to: %windir%\Windowsupdate.log and check the log file if can
    find some more clues.
    For more details, please refer to the following KB.
    How to read the Windowsupdate.log file
    Hope this helps.
    Best regards,
    Justin Gu

  • MS Office Professional Plus 2010 Fails to Install on WIndows 8.1

    Hi
    I have a MS Windows 8.1 (64-bit) and I am trying to install MS Office Plus 2010 on it.  But it keeps showing this error :
    Catalyst Package Install...
        Package: SingleImageWW
        File: C:\MSOCache\All Users\{20140000-003D-0000-0000-0000000FF1CE}-C\SingleImageWW.msi
        Command Line: ADDLOCAL=PPTPresentationTemplates,ThemesAdditionalFiles,NonC2R_PPTNonBootFiles,OneNoteToIEAddin,OfficeAppSupport,DocumentImagingUtils,OutlookDVAct3Files,ACCESSNonBootMiscFullFiles,DeveloperWizards,ProductFiles_B2TR,XDOCSEditorFiles,OutlookDVOrg97Files,ExcelAddinFiles,Excel_PIA,OutlookSearchShellReg,OfficeMSProof6,Publisher_PIA,AccessWizards,AceRepl,OutlookMAPIPST2,NonC2R_OneNoteNonBootFiles,SmartTag_PIA,PubCoreClipArtFiles,OutlookOms,CAGCat10Clips,VSTO,WORDBibliographyFiles,MSTagPluginIMContactFiles,PPTSoundFiles,OutlookDefaults,SingleImageExtras,WebDriveFiles,Office10Fix1,dummy_MSCOMCTL_PIA,DCubeHidden,OISFiles,InternationalSupportFiles_JPN,PubPaperDirect,ProofingParent,SetupExeArpEntry,OUTLOOKFiles,Gimme_OnDemandData,LISTFiles,WORDDocumentTemplates,NonC2R_ProductFiles,WORDSharedFiles,CAGFiles,CAGOffice10,TextConverters,Excel_WISPFiles,PubFontsBalanceSys,Outlook_PIA,OfficeIntlRDC,OfficeOLESupport,OfficeCoreRDC,VSTOCLR35,AceFiles,SetupExeAddRegistry,OutlookDVExtensionsFiles,WebDiscussFiles,SetupXmlFiles,TCDRegistration,MSTagPluginNamesFiles,SetLanguageFiles,OutlookDVCsvWinFiles,GRAPHFiles,Ace_PIA,OneNoteMobileSyncDesktop,CAGCategoryFiles,WISPFiles,CAGCat10,AceOdbc,OutlookSocialConnector,OutlookDVPabFiles,MsoInstalledPackagesScoped,OutlookMAPIEMS2,OutlookMAPILDAP2,QueryFiles,MsoCommonShellHandler,OfficePostBoot,InternationalSupportFiles_ArialUni,OutlookImportExportFiles,VisioPreviewerFiles,WhiteRabbitHidden,AlwaysInstalled,TCWorks7Files,PowerPoint_PIA,dummy_Office_PIA,OutlookMessaging,THEMESFiles,MSTagPluginsFiles,OutlookMAPI2,OutlookMAPICONTAB2,MetricConverter,WORDBordersFiles,RhdInspector,PubWizards,NonC2R_OneNoteFiles,LOBiFiles,WORDNonBootFiles,OneNoteQuickNote,OneNotePIA,OneNoteNonBootFiles,GraphicsFiltersFile,OutlookAddIn_SPS,EXCELNonBootFiles,ACCESSNonBootFiles,OutlookDVCsvDosFiles,SetupControllerFiles,OSpp,ExcelConverter12Files,PubCoreFontFilesSys,ExcelAddInEuroToolFiles,PubWizardsTier2,AccessBDCFiles,MSTagPluginBiblioDataFiles,OneNoteFiles,CARegistryFeature,WordConverter12Files,OneNoteHandwritingFonts,WxpFiles,EXCELFiles,Word_PIA,OutlookSearchPHAndPluginReg,ACCESSFiles,IMNFiles,MSSOAP3,PubPrimary,ProductFiles,OSpp_Core,Word_WISPFiles,VisioPreviewerFileAssocFiles,VBAFiles,Graph_PIA,Access_PIA,TranslationCore,OSetupController,ClviewFiles,ThemesTypicalFiles,PubCoreWizardFiles,PubWizardsTier3,OArt_DocTheme,Forms_PIA,OneNoteToOLAddin,OutlookDVDbaseFiles,OUTLOOKNonBootFiles,PPTFiles,PPTNonBootFiles,VSCommonPIAHidden,LOBiMain,WORDFiles,OfficeDigitalSFiles,PubNonBootFiles,ProductNonBootFiles,PubComPrinting,ACCESSSharepointISAM,ACCESSMiscFullFiles,OutlookVBScript,WISPHidden,MSTagPluginBiblioFiles,MSTagPluginDateFiles,CAGOffice10Clips,PubComPrintingEnRGBCMYK
    REMOVE=IDCRLFiles,ACCESSDEFiles,OrgChartFiles ARPENTRY_NOMODIFY="#0" ARPENTRY_MODIFYPATH="""C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /modify SINGLEIMAGE /dll OSETUP.DLL"
    INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office" SLD_OEMPIDKEY="0" ARPENTRY_NOELEVATEONMODIFY="#0" ARPENTRY_SKUCOMPONENTS="[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Publisher.en-us\setup.xml[~]C:\Program
    Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Excel.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Office.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft
    Shared\OFFICE14\Office Setup Controller\Proofing.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OneNote.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Outlook.en-us\setup.xml[~]C:\Program
    Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Access.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\SINGLEIMAGE\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft
    Shared\OFFICE14\Office Setup Controller\Office64.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\Word.en-us\setup.xml[~]C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\PowerPoint.en-us\setup.xml[~]"
    ARPENTRY_HELPLINK="" ARPENTRY_DISPLAYICON="C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\OSETUP.DLL,1" ARPENTRY_DISPLAYNAME="Microsoft Office Professional 2010" ACCEPTEDEULA="1"
    ARPENTRY_DISPLAYVERSION="14.0.4536.1000" BRANDING_XML="C:\Users\MIKE\AppData\Local\Temp\Setup00000794\BRANDING.XML" SLD_SUPPORTSBYPASS="0" SLD_ACID="E705662B-3B8B-482E-8EFD-A40B97447514" SLD_TRIALTYPE="0" WATSONSQM="AUTOREPORT"
    ARPENTRY_PACKAGEREFS="[~]AccessMUI.en-us[~]ExcelMUI.en-us[~]OfficeMUISet.en-us[~]SingleImageWW[~]OfficeMUI.en-us[~]WordMUI.en-us[~]Proofing.en-us[~]Proof.en-us[~]Proof.es-es[~]OutlookMUI.en-us[~]Office64MUISet.en-us[~]Office64WW[~]Office64MUI.en-us[~]OneNoteMUI.en-us[~]PublisherMUI.en-us[~]AccessMUISet.en-us[~]Proof.fr-fr[~]PowerPointMUI.en-us[~]"
    SLD_DPID="#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"
    REMOVESAMEVERSION="" SLD_LICENSETYPE="1" SETUPEXEINSTALLUICULTURE="en-US" ARPENTRY_SHELLUITRANSFORMLANGUAGE="en-US" USERNAME="MIKE LEE" ARPENTRY_CONTACT="" ARPENTRY_HELPTELEPHONE="" ARPENTRY_PRODUCTCODES="[~]{20140000-002C-0409-0000-0000000FF1CE}[~]{20140000-003D-0000-0000-0000000FF1CE}[~]{20140000-002A-0000-1000-0000000FF1CE}[~]{20140000-001F-0C0A-0000-0000000FF1CE}[~]{20140000-001B-0409-0000-0000000FF1CE}[~]{20140000-0019-0409-0000-0000000FF1CE}[~]{20140000-0117-0409-0000-0000000FF1CE}[~]{20140000-0015-0409-0000-0000000FF1CE}[~]{20140000-00A1-0409-0000-0000000FF1CE}[~]{20140000-001F-0409-0000-0000000FF1CE}[~]{20140000-001F-040C-0000-0000000FF1CE}[~]{20140000-001A-0409-0000-0000000FF1CE}[~]{20140000-0016-0409-0000-0000000FF1CE}[~]{20140000-0018-0409-0000-0000000FF1CE}[~]{20140000-0115-0409-0000-0000000FF1CE}[~]{20140000-006E-0409-0000-0000000FF1CE}[~]{20140000-002A-0409-1000-0000000FF1CE}[~]{20140000-0116-0409-1000-0000000FF1CE}[~]"
    ARPENTRY_INSTALLLOCATION="C:\Program Files (x86)\Microsoft Office" SETUPEXE_DOARPWRITE="1" ACIDS="0248C7A3-0740-4AA9-B4E2-9D51D8B13528;0AEBDF46-4084-4C03-B276-72E473B1B4B0;175D1EED-A58E-4CA6-A712-56C9A5FC2C21;35CB890A-91EB-4ACC-8C22-C1F4443AF630;4631A3F9-6CB5-41FA-9C09-3A56F5964702;46C05E2D-6280-47BF-9D18-3E8E9A5231E1;6C162E12-C502-4ABF-8C26-F38668409172;714BF8ED-0082-48C7-B135-77640026D026;72381D02-E871-4F37-B3E6-0EE15333035C;8C0D01DC-9002-4E6E-AE6F-DC240CCCA1F8;8C8CD357-B14E-4A71-A3B0-0C29C75E9A01;8C9CEBBB-6624-456E-BCFA-07C6B05E7D36;8DD1B467-F97B-493E-8DF3-BA3113C9E6CC;8FD365E7-A2D0-4275-986A-AAB64F264A57;A2AEC78F-6912-491B-8C0E-3DC93986E93C;B101F5B5-C65C-4D09-BBCE-C163EF8E1667;B331C8CF-25ED-44CF-8BB8-C0DF920754E1;BF4EB0E8-5584-4D21-82D0-CDE414724942;CEC08034-A389-449B-A77A-B6E108825347;CFF38370-227D-48D1-AFC5-3CCB502454F4;DAC1D6E7-3D5B-426D-86DD-D523FEB5725F;DDA35B34-C94B-4622-9727-6F33109B9E0C;E705662B-3B8B-482E-8EFD-A40B97447514;EF671765-FE3F-4836-B046-43AB4E23DC03"
    ARPENTRY_SPPSKUID="[~]E705662B-3B8B-482E-8EFD-A40B97447514[~]" ARPENTRY_NOREMOVE="#0" AUTO_ACTIVATE="1" SLD_PKU="0" SLD_PID="82503-556-4287266-70694" LICTYPE="ltPERP" ARPENTRY_UNINSTALLSTRING="""C:\Program
    Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe"" /uninstall SINGLEIMAGE /dll OSETUP.DLL" ARPENTRY_NOREPAIR="#1" ARPENTRY_URLUPDATEINFO="" ARPENTRY_URLINFOABOUT="" REMOVEPREVIOUS=""
    ARPENTRY_CACHELOCATION="C:\MSOCache\All Users" REBOOT=ReallySuppress LAUNCHEDBYSETUPEXE=1 MSIRESTARTMANAGERCONTROL="Disable" SETUPEXEINSTALLUILANGUAGE=1033 SETUPINTLDLLDIRECTORY="C:\Users\MIKE\AppData\Local\Temp\Setup00000794\"
    ARPSYSTEMCOMPONENT=1 TRANSFORMS="C:\MSOCache\All Users\{20140000-0115-0409-0000-0000000FF1CE}-C\ShellUI.MST" ALLUSERS="1"
    PERF: TickCount=373437 Name=MsiPackage::Install Description=Calling OMsiInstaller::InstallProduct for package file "C:\MSOCache\All Users\{20140000-003D-0000-0000-0000000FF1CE}-C\SingleImageWW.msi"
    Log level changed from: Standard to: Verbose
    FILESINUSE: One or more (windowless) processes are holding files in use.
    FILESINUSE: No files have been reported in use, yet a reboot is requested from Windows Installer.  Reboot will be required.
    FILESINUSE:  Scheduling reboot operation: Deleting file C:\Program Files (x86)\Common Files\Microsoft Shared\OfficeSoftwareProtectionPlatform\TBD88B.tmp.  Must reboot to complete operation.
    Log level changed from: Verbose to: Standard
    Error: Failed to install product: C:\MSOCache\All Users\{20140000-003D-0000-0000-0000000FF1CE}-C\SingleImageWW.msi ErrorCode: 1603(0x643).
    I have read through some of the other forum threads and implement the fix but the installation still fails.
    Any help would be appreciated.
    Thanks.

    these may help
    http://blogs.technet.com/b/odsupport/archive/2010/12/30/troubleshooting-office-installation-failures.aspx
    http://technet.microsoft.com/en-us/library/cc511506
    Don
    (Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
    This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

  • USB Console (Serial) Driver fails to install on Windows 8.1 x64

    The USB console cable driver v3.1 will not install on Windows 8.1 x64.  Had a similar problem with Windows 7 x64 but this was fixed using Greg's (greggar25) excellent step-by-step procedure (see post: https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing).
    I am using the driver from this link: http://software.cisco.com/download/release.html?mdfid=282774228&flowid=7442&softwareid=282855122&release=3.1&relind=AVAILABLE&rellifecycle=&reltype=latest
    I followed the same procedures I did for Windows 7 and the install goes without a hitch.  Reboot and connect the USB cable, opened Device Manager and now I have a COM Port randomly appearing and disappearing with its number incrementing well above 1,000.
    A few times while it appeared for a few seconds, I was able to right click on the properties, update the driver and chose Cisco Serial and it settled down but it did not assign a COM port.  Then a few seconds later, it starts the disappearing/reappearing thing again.
    Anyone have luck getting this to work with Windows 8.1 x64?

     Hi,
    open Device Manager by simply typing the words on the Windows 8.1 Start Screen. The Search Charm opens and click Device Manager in the displayed list. 
    In Device Manager a new hardware category, CiscoUsbConsoleWindowsDriver, is displayed. It has two components: the Cisco Bus enumerator and the Cisco USB to Serial adapter. Expanding the Ports hardware category shows a new Cisco Serial port. 
     or 
    Look into below 
    https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing
    1) Install the usb console driver\windows 64\setup(x64)
    2) Follow the wizard and accept the defaults
    3) Restart the computer (the installer usually says it needs a restart)
    4) After restarting the computer, plug in the usb cable
    5) The computer should say installing Device driver software and fail at the Cisco Virtual Comm Port00
    6) Click the Windows button, right click computer, manage
    7) Under Computer Management, Click Device Management
    8) Go to Ports (COM & LPT)
    9) You should see the Cisco Virtual Comm Port00 with a Yellow Exclamation point on it
    10) Right Click on the Cisco Virtual Comm Port00 and select Properties
    11) Click the Driver Tab
    12) Click Update Driver
    13) Select Browse my computer for driver software
    14) Select Let me pick from a list of device drivers on my computer
    15) Choose the Cisco Serial Driver
    16) Device Driver is installed successfully, take note of the com port it is using and enjoy.
    HTH 
    Sandy 

  • HT3475 voiceover fails to install on windows 8.1

    iTunes 11.1.4.62 fails to install VoiceOver on my Windows 8.1 OS for my iPOD Shuffle

    Ignore above post, but read this:
    https://discussions.apple.com/message/22906060#22906060

  • Photoshop icons too small in PS CS5 installed on Windows 7.

    I have just installed my copy of Photoshop CS5 onto my Windows 7 running as a virtual machine in Parallels on a new 13" MacBook Pro.
    The icons down the left hand side and menu items across the top are far too small to be used comfortably.
    I see this problem discussed on a number of Adobe related forums but no solutions.
    Do Adobe have a fix yet?
    Edited to say 13" not 17" MacBook.

    Thanks, Mylenium, for letting me know.  I suspected as much simply because I couldn't find an answer on any of the forums where people are complaining about this.
    I must say I am less than chuffed (British understatement) about this.  Adobe are nothing less than an absolute disgrace.
    I bought Photoshop CS5 extended for £365 just less than three years ago and it's now more or less useless: certainly difficult to use anyway.
    I shall be looking for an alternative and it almost certainly won't be supplied by Adobe.
    Strangely enough my very old copy of Dreamweaver works fine running on the Mac.  Hey ho.

  • System Update 5.0.2 fails to install on Windows 8.1 Preview

    I am trying to install System Update 5.0.2 on a W520 running a fresh install on Windows 8.1 Preview.  Solution Center is already installed.  No other software has been installed on this box, other than standard windows updates.
    When I try to install SU5.0.2, I can get to the EULA screen, click on the "I accept ..." toggle, Next button enables, but does nothing when I click it.
    Any suggestions on how to SU5.0.2 to complete?
    Thanks.
    Tom
    Here are the last lines in the tvsuSetup.log file after I try to press next, but before I cancel the install.
    Action ended 10:23:37: CostFinalize. Return value 1.
    MSI (c) (9C:3C) [10:23:37:709]: Doing action: MigrateFeatureStates
    Action 10:23:37: MigrateFeatureStates. Migrating feature states from related applications
    Action start 10:23:37: MigrateFeatureStates.
    Action ended 10:23:37: MigrateFeatureStates. Return value 0.
    MSI (c) (9C:3C) [10:23:37:709]: Skipping action: PatchWelcome (condition is false)
    MSI (c) (9C:3C) [10:23:37:709]: Doing action: InstallWelcome
    Action 10:23:37: InstallWelcome.
    Action start 10:23:37: InstallWelcome.
    MSI (c) (9C:3C) [10:23:37:709]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'InstallWelcome'
    Solved!
    Go to Solution.

    So first of all you solution.
    open Command Controll (CMD) (i would recommend in administator mode)
    navigate to the folder where you saved your "systemupdate.exe" 
    type systemupdate502-06-26-2013.exe /s /a /v"/qn"
    (this will install System Update silent. For more inforamtion about that you should visit the microsoft support)
    Now wait a bit (depends on how fast your maschine is)
    Now open Metro, press this new little "down arow" and there you must find your installed systemupdate
    So and now a few words more:
    I had this same Problem on a Leaked Final Windows 8.1 version. This means when in October Win8.1 will offical realease, Systemupdate will not work. I think lenovo should go back to his roots and provide the best support they could instead of blocking all work to Windwos 8.1 Threads. I know many people that buy your Laptops only because of the good support.

  • PPro CS4 and CS5 installed and Windows 7 default launch from project dbl-click is...CS4?

    This is sort of a curious one.  I have to keep CS4 installed to edit Camtasia files as their codec is a 32 bit no-go with 64 bit CS5...
    Oddly, when I double-click any PPro project (most were created in CS5), they will launch CS4, not CS5.  When i go into properties and attempt to link a different application as the default for this project type, I browse to PPro CS5's executable and choose it, but end up back in the "Open with" dialog which again, only shows PPro CS4 as an option.
    Oddness...  anybody else seeing this?  I just launch CS5 from it's shortcut and it loads whatever I want without an issue, but I still double click without thinking 3-5 times a week and have to back out...It's an annoyance.

    Tim,
    Are you comfortable wading around in the Windows registry? If so, you can probably fix this with a quick digit change:
    In the Registry Editor (launch regedit from the Run dialog), find the following key: Computer\HKEY_CLASSES_ROOT\Adobe.Premiere.Pro.Project\shell\open\command.
    Once you select the "command" key, you'll see the program destination string on the right side; likely it's pointing to CS4. Double-click the "(Default)" string and change the value to to following, exactly as pasted here:
    "C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe" "%1"
    That's with the outside quotes and everything. OK the change, and you may or may not need a system restart, but that should correct the issue. Basically the file extension (in this case, .PRPROJ) is associated with a class (Adobe.Premiere.Pro.Project), and that class points to default application. Once that's fixed up, the chain should be put back together.
    Also, there is another key in: HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Adobe.Premiere.Pro.Project\shell\open\command. Changing the above should change this as well, but you may want to check it.

  • Apple Mobile Device Support fails to install on Windows XP Pro SP2

    I have a dualboot between my Vista and my XP, my itunes on Vista works great and can connect with my ipod touch (2.1) but on my XP the installation of AMDS fails. Tried completly re-installing all services, i searched the internet for possible solutions but it seems i'm the only one having problems with windows XP, all the other similar problems are on Vista.
    I know it's AMDS that fails because i unpacked the .exe file and ran all the installers one by one, they all work except AMDS (i get a rollback feature). I downloaded it with 3 different browsers from the official apple site and to eliminate that it's my hard drive that gives errors i also did a CHKDSK.
    Also, it's not my ipod either, it can connect to my Vista and other computers with windows XP.
    All the latest drivers are installed and during the installation no CD/USB was inserted except my mouse, i even tried it with the CD tray open (sometimes helps). Safe mode also doesn't work
    I have no idea what's wrong. Could anyone help me out?

    Hi,
    good news: You're not the only one with this problem. Bad news: I don't have a solution either. To restrict possible answers here is what I did so far:
    - computer was set up brand new with Windows XP Pro SP2
    - iTunes installed, AMDS didn't, everything deleted after this, nothing (no iTunes, no Quicktime, no Apple updater) left on computer
    - disconnected laptop from network, switched off firewall, switched off virus scan
    - ran install package for AMDS only, as Johan described, install won't finish, files are first copied then everything gets rolled back (and no log found). This means the service is not existing, so the problem is NOT solved by going into services and switch it on ...
    ANYONE PLEEEASE?
    Cheers & thanks

  • Failed re-install in windows 7 64 bit - error 2753.The File 'trialencoder.dll.70DBED24_B579_40CB_AB0

    Trying to reload Acrobat X Pro after loosing sight of a netwokr scanner.  Getting the flowwoing error log.
    Exit Code: 6
    - 0 fatal error(s), 4 error(s), 3 warning(s)
    WARNING: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    WARNING: OS requirements not met for {CEFF1F0F-787F-457D-B492-07F9B3F7C0D2}
    WARNING: OS requirements not met for {3F41BA46-09C3-4500-96D7-DC4390AD0124}
    ERROR: Error 2753.The File 'trialencoder.dll.70DBED24_B579_40CB_AB0B_F1221A3E9EC5' is not marked for installation.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 2753.The File 'trialencoder.dll.70DBED24_B579_40CB_AB0B_F1221A3E9EC5' is not marked for installation.
    ERROR: The following payload errors were found during install:
    ERROR:  - Acrobat Professional: Install failed
    Firewall and virus software were disabled.
    Any ideas?  ---- Thanks

    Found that uninstalling the entire CS5 suite and re-installing solved install error.  The problem with not recognizing the LAN scanner was the result of a firewall setting that got changed somwhow.

  • Installation issue : sql server 2008 r2 some services failed to installed on windows 7

    I have been facing this problem while installing sql server 2008 r2.. i tried so many times but same result .. it shows sql server installed with some errors
    database engine service : failed
    SQL Server Replication : failed
    Full-Text Search : failed
    Analysis Services : failed
    Reporting Services : failed
    And my Log file (or) summary file is (it is in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log):
    Overall summary:
      Final result:                  User cancelled
      Exit code (Decimal):           -2068380094
      Exit facility code:            1207
      Exit error code:               1602
      Exit message:                  User has cancelled.
      Start time:                    2014-08-14 21:15:26
      End time:                      2014-08-14 21:23:58
      Requested action:              AddNode
    Machine Properties:
      Machine name:                  MANJU-PC
      Machine processor count:       4
      OS version:                    Windows Vista
      OS service pack:               
      OS region:                     United States
      OS language:                   English (United States)
      OS architecture:               x86
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services                
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication                  
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search                        
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services                       
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services                      
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Management Tools - Basic                 1033                 Developer Edition   
    10.0.1600.22    No        
      Sql Server 2008                                                         
    Management Tools - Complete              1033                 Developer Edition    10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No      
      Sql Server 2008                                                         
    Client Tools SDK                         1033                
    Developer Edition    10.0.1600.22    No        
      Sql Server 2008                                                         
    Integration Services                     1033                 Developer Edition   
    10.0.1600.22    No        
    Package properties:
      Description:                   SQL Server Database Services 2008
      SQLProductFamilyCode:          {628F8F38-600E-493D-9946-F4178F20A8A9}
      ProductName:                   SQL2008
      Type:                          RTM
      Version:                       10
      SPLevel:                       0
      Installation location:         D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\x86\setup\
      Installation edition:          DEVELOPER
    User Input Settings:
      ACTION:                        AddNode
      AGTSVCACCOUNT:                 <empty>
      AGTSVCPASSWORD:                *****
      ASSVCACCOUNT:                  <empty>
      ASSVCPASSWORD:                 *****
      CONFIGURATIONFILE:             
      FAILOVERCLUSTERGROUP:          
      FAILOVERCLUSTERNETWORKNAME:    <empty>
      FTSVCACCOUNT:                  <empty>
      FTSVCPASSWORD:                 *****
      HELP:                          False
      INDICATEPROGRESS:              False
      INSTANCENAME:                  <empty>
      MEDIASOURCE:                   D:\Softwares\JAVA & .NET SW\SQL Server 2008\SQL Server 2008\
      PID:                           *****
      QUIET:                         False
      QUIETSIMPLE:                   False
      SQLSVCACCOUNT:                 <empty>
      SQLSVCPASSWORD:                *****
      X86:                           False
      Configuration file:            C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\ConfigurationFile.ini
    Detailed results:
      Feature:                       Integration Services
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Client Tools Connectivity
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Management Tools - Complete
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Management Tools - Basic
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Client Tools SDK
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Client Tools Backwards Compatibility
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
      Feature:                       Business Intelligence Development Studio
      Status:                        Failed: see logs for details
      MSI status:                    Passed
      Configuration status:          Passed
    Rules with failures:
    Global rules:
    There are no scenario-specific rules.
    Rules report file:               C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140814_210558\SystemConfigurationCheck_Report.htm
    Exception summary:
    The following is an exception stack listing the exceptions in outermost to innermost order
    Inner exceptions are being indented
    Exception type: Microsoft.SqlServer.Chainer.Infrastructure.CancelException
        Message:
            User has cancelled.
        Stack:
            at Microsoft.SqlServer.Configuration.UIExtension.Request.Wait()
            at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.SubmitAndWait(Request request)
            at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceProxy.NavigateToWaypoint(String moniker)
            at Microsoft.SqlServer.Configuration.UIExtension.UserInterfaceService.Waypoint(String moniker)
            at Microsoft.SqlServer.Configuration.UIExtension.WaypointAction.ExecuteAction(String actionId)
            at Microsoft.SqlServer.Chainer.Infrastructure.Action.Execute(String actionId, TextWriter errorStream)
            at Microsoft.SqlServer.Setup.Chainer.Workflow.ActionInvocation.InvokeAction(WorkflowObject metabase, TextWriter statusStream)
            at Microsoft.SqlServer.Setup.Chainer.Workflow.PendingActions.InvokeActions(WorkflowObject metaDb, TextWriter loggingStream)

      Requested action:              AddNode
      OS architecture:               x86
      Process architecture:          32 Bit
      OS clustered:                  No
    Product features discovered:
      Product              Instance             Instance ID                   
    Feature                                  Language            
    Edition              Version         Clustered
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Database Engine Services                
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            SQL Server Replication                  
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSSQL10.MSSQLSERVER            Full-Text Search                        
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSAS10.MSSQLSERVER             Analysis Services                       
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008      MSSQLSERVER          MSRS10.MSSQLSERVER             Reporting Services                      
    1033                                      10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Management Tools - Basic                 1033                 Developer Edition   
    10.0.1600.22    No        
      Sql Server 2008                                                         
    Management Tools - Complete              1033                 Developer Edition    10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Client Tools Connectivity                1033                 Developer Edition    10.0.1600.22   
    No        
      Sql Server 2008                                                         
    Client Tools Backwards Compatibility     1033                 Developer Edition    10.0.1600.22    No      
      Sql Server 2008                                                         
    Client Tools SDK                         1033                
    Developer Edition    10.0.1600.22    No        
      Sql Server 2008                                                         
    Integration Services                     1033                 Developer Edition   
    10.0.1600.22    No        
    Instead of installing SQL server instance you selected add node which is to be selected when SQL server installation is to be made on Node which is being added to cluster. Since your OS is not clustered I am sure you selected worng option.
    Please right click on setup file and select run as administrator. Now installation window which pops up on that on left hand side select
    installation and then on page that appears select 'New server standalone installation or add feature to existing installation'.
    You already have SQL server 2008 installed on your machine as per feature discovery report
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
    My TechNet Wiki Articles

Maybe you are looking for

  • Sharing an iTunes library on a single dual-boot machine

    Hello, I was wondering if someone would be able to help me. I run both Snow Leopard and Windows 7 on the same machine. I also have my iTunes account that I would be able to access through both of these OS' on the same USB hard disk? At the moment, my

  • Adding images to a ListBox in Applet

    Hi, I wanted to add images to an Listbox as that of an Yahoo IM or AOL (IM) has. Do any one have any idea? Here is my code for Java, Please tell me where should I have to correct my code so that I can achieve such a thing. or if you do have time, ple

  • Major issues with my IPhone 4s Bluetooth

    I am having issues with bluetooth with my Iphone 4s, i cannot connect to another iphone either. I am trying to connect to my cars hands free but all it does is search and dose not pick up any thing, I have tried the same with my blackberry and have h

  • Disc Utility - warning if RAID HD fails ?

    I would like to set up an external RAID1 in a Sonnet JBOD ( Fusion D400P ). I just learnt, that if I set up this RAID1 with Apples Disc Utility, there will be no automatic warning if one of the drives is failing... Is that true ? Do I need to set up

  • Default sorting order used by oracle

    Can anyone please let me know whether oracle uses any default sort order or not when executing an sql which does not have any sort order/ order by clause? I have a sql query where no sort order is specified. Now if I add some more columns in the sele