Another feature to allow users to change screen resolution to HD for gaming

I liked k3 Note, smartphone which is filled with lots of professional features. Can you add a control to change screen resolution to HD for games. Lots of people are there which are thinking that other phones' gpu are better and the Mali t760 m2 not so good.

Hi
In case someone else encounters the same problem, here is some more information.
The high refresh rate is quite visible in Device Manager. It would refresh every one or two seconds. The cause seems to be a conflict between a Fingerprint software installed during the Task sequence and the Validity Sensors Drivers.
I made a Scan for hardware change in Device manager and saw that a few devices were appearing as unknown. Right click, update drivers from local cache solved the problem.
I cancelled install of the fingerprint software and did not encounter the problem anymore.
Brgds
bruno

Similar Messages

How to allow user to change SAP Portal password by themselves

We would like to allow user to change SAP Portal password by themselves. However, I added role Manage_My_Password and Manage_My_Profile to a user account. After logoned with this user account and opened the option 'Personalize'. I only find the page allow me to customize the page layout. But I haven't find tab for changing profile and password.
Pls advise.
Thanks.
Edward

Hi Edwar,
You can hide the pages from portal personalization workset. copy the workset and select the page and click on property -> select Invisible in Navigation Areas ->yes
You can find the workset under
Portal content->End user content->Standard Portal Users>Workset->Portal Personalization
If you want a custom developed application fro change password see the below blog
A Change Password Application
Hope it helps
Regards
Santosh

902: Allowing user to change profile like phone-nr. in self-service

Hi all
An existing Portal user can see his profile using "Account info/My_profile", but he cannot change it (a least by default).
Is there a way to allow users to change their personal profile in self-service?
Thanks
Tino

It may be that the transaction is being routed by default for approval. Check with workflow administrator to see where the transaction has gone. I think you will find it is waiting for an approver!
Many SSHR transactions use a default AME (Dynamic approval) rule which will route the transaction up the supervisor hierarchy for approval. Your transaction data will be stroed in staging tables (HR_API_TRANSACTIONS, STEPS and VALUES) until the approval is made. Only then will it be applied to the underlying tables.
Let me know if this solves the problem.
Regards
Tim

Problem to change screen resolution in MB Intel DG41 with video on board

Hi, I need some help as soon as possible because this problem it´s make me difficult my job. I have installed the MAC OS Snow Leopard 10.6.2 in a Motherboard Intel DG41 with micro Core2Duo and video on board of this motherboard and don´t let me change screen resolution. I have a display of 22´ inches and the panel to change the screen resolution only mark 1024x768. I think the more likely it is that the system does not recognize me the drivers to this chipset of video. I searched everywhere on the internet but I have not found the solution.
Thanks Fernando

First of all sorry for my English is not very good. My PC is an Intel MotherBoard DG41 with onboard video and a micro Core2Duo. The system is MAC OS Snow Leopard 10.6.2.
Thanks for replying

Change Screen Resolution GNU/linux

hi everyone
i need to change screen resolution for my linux box.
with command #xrandr
showing only 640 X 480,can i add more size?how to add?
tq

Hi,
Use this forum for feedback about OTN programs, Web site content, and systems - product-related questions will be deleted.
Please post your question in the appropriate forum.
Oracle Enterprise Linux
Oracle Linux
Linux (non-OEL)
Generic Linux
Thanks,
Hussein

Change Screen Resolution or not Change Screen Resolution?

I mean is it possible to change screen resolution with Java?
I read some topics (not in this forum) that is impossible. I know there is a method to set at full screen a frame with the favourite resolution but does it effectively exist a method to set the screen with a favourite resolution?
For example:
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setUndecorated(true);
        frame.setIgnoreRepaint(true);
        device.setFullScreenWindow(frame);
        if (displayMode != null && device.isDisplayChangeSupported()) {
            try {
                device.setDisplayMode(displayMode);
            } catch (IllegalArgumentException iae) {
                System.err.println("EX: " + iae);
        ...the device.setDisplayMode(displayMode) always throw me an exception: Invalid Display Mode (or something like that) with all permitted display modes (640by480, 800by600, 1024by768, etc...), with all permitted refresh rates, with all permitted color depths.
Illuminate me please!
Thanx in advance!

Hi,
I think i you should check this link
http://forum.java.sun.com/thread.jspa?threadID=624649&messageID=3554316
with help of above link you solve your problem of screen resolution
but problem with above code is when you apply on frame that's ok but is you add any JDialog to that frame then JDialog and move JDialog with mouse dragged and dropped
then dialog is invisibly run .
you check this i you find any solution please post that it's urgent

How to change screen resolution on touchpad

how to change screen resolution on touchpad ?i was working on my tp and out of the blues my screen looks like it is at 800*600
or is this the screen itself that went bad?
can someboby please tell me the procedure to use the 12 mt warranty..
tia
Post relates to: HP TouchPad (WiFi)

Sorry to say reloading WebOS did not help this issue on my TP. contacted Support and was told to send it.Even sorrier to say that my TP is now lost. My tracking number reports it as delievered on Dec 5, but HP has no record of it.When I got back on Chat they are now also telling me that my TP serial number is a EU model, even though my box clearly states HP Touchpad ,US, 1.20,32gb,Wifi.
Not sure what that even has to do with it being lost now..if it is as they say and no warranty on it in US I just want it sent back.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

How do i allow users to change their oracle password?

Please help.
I need a procedure/module in my forms6 to allow users change their oracle database passwords. I am using Oracle 8.0.6.
thanks for a reply

SEND YOUR EMAIL SO I CAN SEND YOU A COMPLETE
FORM HOW TO CHANGE THE USER PASSWORD
MARK

How to allow users to change password

I have enabled users to change their passwords in the Server.app for the Default Site with SSL, and who can access is a group of individuals.
When I load up the Server site, I am presented with
a Login to which I then add my username and password and I am then presented with
Welcome to OS X Server
OS X Server makes it easier than ever for the people in your organization to collaborate, communicate, and share information.
I Choose My Settings and the site is redirected to /changepassword of which a page comes
Forbidden
You don't have permission to access /auth/ on this server.
The Directory /Library/Server/Web/Data/Sites/Default/auth/ exists with the corret permissions. This is an empty directoy tho
Apache Logs:
Directory index forbidden by Options directive: /Library/Server/Web/Data/Sites/Default/auth/
I cannot get this to work. WIki's are turned on but that doesnt work either.
If I Launch /wiki, I am prompted to login, to with I do, and i just get a blank web page
Apache logs:
File does not exist: /Library/Server/Web/Data/Sites/Default/__collabd
This is on a new install of OSX server
Any Suggestions?

Hi,
On the landing page at the bottom it should say "change password".
That brings you to a forbidden page?
On my server I do not have the /auth/ folder in my default site, but my changepassword page does work.
Can you check if going to https://127.0.0.1/changepassword does work? It will give an SSL error.
Then it might be DNS related conflicting with another router/server in your network
Or... charge $ 5 per user to change his or her password personally
Goodluck!
Jeffrey
StarPine Support

Allow users to change the Active Target Category in the POV bar

Can't figure out where in Object Maintenace to allow user to be able to select the Active Target Category in the POV bar.

It's not in object maintenance. You need to disable the POV Mode (Admin / POV Mode) by removing the checkbox, iwhich then means all users will have the ability to change the category (and period). I suspect in the POV it currently has GLOBAL defined ( which means it is controlled by admin users, and you need to switch it (by default) to LOCAL via the POV Mode option.

Not allow user to change Vendor in MB1B(541 mov) in subcontracting process

Hi all
Im doing 541 mov type in mb1b wrt PO number, the vendor number is automatically fetching from PO but user can change the vendor there,
I have to set display field as vendor,not allow to change vendor in MB1B..how can i set??? plz help me
thanks
ramesh reddy

Hi,
I would like to remeber you there is no direct connection between the purchase order and the
subcontractor stock. When you enter the purchase order in the MB1B
transaction, the data defaults from the purchase order only as an aid to
entry.
Please review the following notes for further explanations:
70739 - No order-related stock of material provided in R/3
50540 - Quantity proposal for movement type 541 for the
The transaction is designed to be a way to simplify the input of the
data. It allows you to change the data and overship or undership if you
would like. As there is no vendor stock specifically related to a
purchase order, there is no quantity check, and if you want, you can
post it several times or change the quantity.
In standard procedure we normally use ME2O instead of MB1B
BR
Nadia Orlandi

Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.

Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

Allow user to change image of a document set

Hello all,
is it possible to allow user to upload and set an image in the welcome page of a document set ?
For example, I want to create a document set for each customer, to store document related to this customer. In the document set welcome page, I would like to display the customer logo.
Is it possible in a easy way ? :)
Thank you !

Hi David- automatically? No, unless you're ready for some major coding. Also, what permissions do you plan on giving the customer?
The only way I can see this happening is if you provide the title for the image to your customer, then give them access to the library where it's stored and hope they use the exact title to replace the file that's there.
cameron rautmann

Unable to Change Screen Resolution in Remote Session - Windows Server 2012 R2

Does anybody know of a way to allow Remote Desktop users to adjust their own screen resolution in a remote session under Windows Server 2012 R2? We are struggling with this and can't seem to find a solution.
When users login to their RDP session and try to adjust their screen resolution this message is displayed in Control Panel:
"The display settings can't be changed from a remote session."
We don't want to use the "make text and other items larger or smaller" scaling feature, as this produces undesirable results with some of our applications. We also don't want to have to support multiple types of RDP clients or RDP shortcut
files.
We have looked at other posts but can't find an answer that applies to Windows Server 2012 R2. The closest thing we could find is KB2726399, but it only applies to Server 2008.
Does anybody have a solution for Server 2012?
Thanks

Hi,
Currently you cannot change the resolution from within the session. This is normal and expected behavior.
Unfortunately this means you need to set the desired resolution before connecting by using custom .rdp files, manually within the Remote Desktop Client, custom web launch page, custom windows launch program, etc.
-TP

Change screen resolution message when trying to start media manager

I use a UMPC (Samsung Q1UP) that only has a screen resoluion opion of 1024 x 600 as it is a 7" landscape mobile computer. When I start up the blackberry software, and then try to launch Media Manager etc., it gives me an error message to change the screen resolution to at least 1024 x 768 or higher.
As I cannot change the screen resolution to accomodate the software request, has anyone come up with a fix for this issue?
Thanks in advance!

This is the part of technology I hate with a passion. When new products come out, companies have no idea what to do when compatibility issues arise and they leave millions of people in the dark.
Blackberry charges for support if you call them direct (imbecilic policy in my opinion). You have to go through AT&T to get support from Blackberry for free. (I believe the Curve phone has an inactivated price of $699, you would think Blackberry would want to talk directly to their customers for free, but no!)
I spent 20 minutes on the phone with AT&T to explain the issue I was having. After convincing them I know what I am doing, they put me through to Blackberry support tech, where I had to repeat the issue over again.
After spending another 40 minutes with a junior, then senior Blackberry tech, their solution was for me to plug in an external monitor and set it to 1024X768 so the Roxio Media Manager comes up.
This is imbecilic as well, as the whole purpose for this netbook is so that I don't have to have to lug around a monitor with me, otherwise with the netbook and the monitor I am way over 7 lbs.
There was another person in this forum who recommended installing an older Desktop manager software without the media manager product on my PC to allow me to access the files directly. Although this works for a media card, it DOESN'T work for the internal memory in the phone. The internal memory in the phone appears to be locked up tight and only accessible to the media manager, or Bluetooth. I did manage to get the files off via Bluetooth ONE FILE AT A TIME! took me nearly 2 hours.
My suggestions to Blackberry:
1) Scrap Roxio Media Manager. Most people who use this phone know what they are doing and understand how to drag and drop files from a disk drive to a computer. Roxio Media Manager should not be necessary to get files off of a phone.
2) Open up the internal memory inside the phone so it comes up as a disk drive on the computer.
3) or - Do something else to make this work with Netbooks!
Message Edited by diode on 04-09-2009 11:36 AM
[email protected]

Another feature to allow users to change screen resolution to HD for gaming

Similar Messages

Maybe you are looking for