Another Final Cut Studio 2 question...

Hey guys,
I'm hoping this is the right place to ask this question.
A little while ago I had the Academic version of the Production Suite then last year, I bought my MacBook Pro. I upgraded for the Final Cut Studio when they had the promotion to upgrade for 200$ or whatever it was.
Now, my question is... since I upgraded from my Academic FCP to the generic upgrade (which I'm assuming was the same upgrade for everyone since there's no more Academic badge,) can I purchase the FinalCut Studio 2 upgrade? Or do I need to get the Academic version?
Is there a way to make sure, with my serial number, which kit I'm allowed to buy?
Another quicky; I have a Dual 2.5G5 PowerMac and I noticed that my graphics card doesn't meet the requirements for Color. What's the suggested graphics card for this system that will work with all the studio apps? I don't want something that's too expensive. It's funny because the graphics card on my MacBook Pro meets the requirements but the screen doesn't and my PowerMac's graphics card doesn't meet the requirements but my screen has a high enough resolution...
I know it's a long post but any help would be appreciated!
Thanks!

They only say that you need the video card in that the Quad came with stock... The 9600 Pro is in spec with Color, which is one of the main reasons why I'm upgrading! I have a month to find one... The local shop has been backordered for awhile and it seems the same fate for online vendors I'm looking for an alternative!

Similar Messages

Firewire and final cut studio 2 question

I just got a Macbook Pro and I'm loving it! I also have Final Cut Studio 2 and i'm anxious to start playing. my question is about what type of firewire i need to get to capture video from my Canon hv20 camcorder. which is better, a 4-pin or a 6-pin? I see from a previous post that the 6-pin can supply the camera with power. I'm not so concerned about that, I'm just wondering what are the other important differences (if any) between 4 pin and 6 pin? differences in speed? vid quality? and if i decide to buy an external hard drive to keep my video files on, does that change my decision? thanks for any advice/answers!

+"I'm just wondering what are the other important differences (if any) between 4 pin and 6 pin?"+
Just two wires that carry power. A 4 pin connecter is a differnt shape to a 6 pin and are not interchangeable. All miniDV cqameras use a 4 pin system.
+"differences in speed? vid quality?"+
No different.
+"and if i decide to buy an external hard drive to keep my video files on, does that change my decision? thanks for any advice/answers!"+
Not at all. An external drive will require a 6 pin cable.
From camera to external 4-6 pin.
From external to Mac 6-6 pin.
This info assumes you are using firewire 400. Some Macs have firewire 800 which requires a different cable to the 6 pin.
Al

Final Cut Studio Install Question

Hi All,
I just bought he Final Cut Studio 2 upgrade package (from FCS1) and want to install on my MacBookPro 17". I don't have enough space on the drive to install all the media (sound track loops, motion elements, etc...). I'd like to install the basic app on my internal drive with all the "templates, loops, etc..." on anexternal drive, but I can't seem to find a way to direct the install program to split tings up like that.
Do I have to install the program with out the loops first, then go bak and install the elements seperately? Or is there an easier way to do this?
Thanks,
Steve Martin
Omni Productions
Orlando, FL
macBook Pro 17" - 2 Gig Ram - 120 Gig HD

I used to live a couple of block from your business in Orlando. I'm disappointed that I never did business with you - would have save me gas!
Your Mac needs a diet. You can eliminate tons of files that you don't need within the apps your have installed. Did you know that most of your apps are like two apps (Universal) - one runs on PPC and other on Intel? You don't need them both.
You can reduce the Photoshop app by trashing over 100 MB.
Illustrator 303MB down to 182MB.
FCP 343MB down to 101MB!
http://www.xslimmer.com/
I've used this and had no problems. You'll love the FCP 6.

Edit to tape in Final Cut Studio 2 question

This entire week we've been dividing time and shoots using one camera, a Panasonic DVX100A. As a result I think the settings on our camera and computer have changed a bit between shoots. That being said I'm having a problem doing an 'Edit to Tape' from the file menu in Final Cut Pro 6.0.3. When the Edit to Tape window comes up, we set the in point there after pulling over the Sequence we want to edit to tape on the camera monitor for the recorder it says it's recording. However, all I see it a blue screen with the 'REC' notice at the top. Since we've done this using this camera a few times I'm not sure what settings may have changed. To sum up, I need to know what has to change in order for me to effectively edit a sequence to tape in FCP 6. Thanks (most definitely) in advance for your help!

Alex, thanks for your help. I didn't notice one of the FCP settings for my camera had been changed. Funny how working at 2:45 a.m. can sneak up on your brain.
Thanks again & take care!

Moving Final Cut Studio to another computer

I just got a new G5 and want to take my Final Cut Studio off my Power Book G4 and put it on the G5 and then instal Final Cut Express on the Power Book.
Can I transfer the license to another computer and if so how is my question.
Thank you for your time, Robert

All you need to do is remove it from the powerbook, and install it on the G5. The license for the softare is for the software, not what machine it is on. But it can only reside on one machine...which you know.
Good for you.

I have a question before I buy Final Cut Studio 2...

I plan on buying Final Cut Studio 2 tomorrow, but before I buy it, I have a question. If something were to happen to my MacBook Pro, can I just install it on another computer? It might be a stupid question but I just want to be sure before I drive to the Apple Store.
Thanks!

As long as the computer meets the minimum specification you can install it on any computer.
Physically you can install it on thousands of computers but Apple wouldn't be too pleased !
However, you are legally allowed to have it simultaneously on one laptop and one desktop that are owned by you.
So whenever you want you can take it off one computer and put it on another.

Final Cut Studio 2 Install questions ...

I have a dual 2.0 G5 that I bought used a while ago and it had Final Cut 5 installed on it. I just bought Final Cut Studio 2 and when I intall I can see that it is upgrading most of the components. Is there a way to uninstall the earlier version and do a clean install of my new FCS2? Or is letting it upgrade the previous owners version okay? I think I would feel better knowing my nice new software bundle was being installed cleanly?
Also, I plan on installing this on my PowerBook. What steps should I take to have the audio/template content get installed on an external drive. I only have 27Gigs available on the internal drive of my laptop.
Thanks in advance,
Keith

I would personally wipe the whole machine if I bought it new-- you don't know what the previous owner's loaded on, how many tiny processses have gotten piled up in the background. The only thing you need to run a fresh install is the FCP5 serial number.
As for the PowerBook installation, you will have the option when installing to place the additional content in another location other than the default. I don't remember exactly when this option presents itself, but keep your eyes open and I'm sure you'll see it.

Questions about final cut studio 7 and motion 5

Hello!
I have two questions:
1. How do I find all the updates to the final cut studio? Last came out before the final cut pro x came out.
2. Works Motion 5 good up to final cut pro 7? Will there by any problem to use both prorammene against each other? And if so, what kind of problem can arise?
I would be grateful if someone could tell me this because I had settings alert Motion 4 (which now crashes at startup). And considering buying Motion 5 for I will not have to be automatically installed again my whole system that works one hundred percent. The job I would rather not do.
I'm not so good English so I hope you understand what I mean.
Can any help me for this little crisis I have a lot of work left and wait. :-(

This I have done to run instaleringen the entire final cut studio re-enter. Ran software product update. Have checked the final cut pro and then I have version 7 and version7.0.3 as I had before.
Before this, I have thrown the preference files for Motion 4, but disk utility to repair permissions on the system drive, I have not used.
But how can a fjærne entire final cut studio package also put it in again so we have aclean new installation of the programs?
How can we explain that this has happened? Just what I do not understand.
Are happy for all the tips I get. For I dread to put reindeer speakers the whole thing sinceit worked so well as it did before this happened.
Thanks to all who will help me. I will be very happy if this can be solved in an easymanner without having to spend a whole day on automatically installed everythingagain.
ke

Final Cut Studio 5.0 question

Hi
This is a Final Cut Studio (FCS) 5.0 PPC version question. I understand that Final Cut Pro is a pro application in the FCS suite, but since there is no FCS forum i will post this question in the Final Cut Pro forum.
If I were to install the whole FCS 5.0 PPC version on my MacBook Pro (or a future iMac) will it be able to work under Rosetta and it will therefore run a little slower? Ive heard that if you install the non native FCS you will not be able to update it to universal FCS? Also if it does work on intel macs, do you have to buy the FCS application updates, or can you buy the whole complete universal FCS 5.1 suite?
Thanks
Regards
Rich

is there a full FCS available at the moment that installs all the pro apps in FCS as universal? or do I have to install a full working PPC version of FCS and buy the crossover updates from apple?< </div>
The shipping version, 5.1, is universal. 5.0 might be available somewhere but not here. 5.0 is not universal which is why we all up- or cross-graded for cheap when we got the chance. You can upgrade from v1, 2 or 3 for $700.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/6674001/wo/9h7qZ eo3Ujp72nIZSsY1wfKWlO9/1.0.21.1.0.8.12.1.27.1.13.0
bogiesan

Final Cut Studio 2 Upgrade Question

Hi
I have a Final Cut Studio 1 installed on my laptop. I still have the original install discs and serial number.
I recently purchased Final Cut Studio 2 upgrade from a "reputable" source on ebay....but it came with NO serial number.
I have heard that if I send the discs to Apple they will supply me with a new Serial Number. Is this true?
thanks

The serial number sticker(s) come affixed to the front of the booklet titled "Installing Your Software." If you did not receive the serial number, and ALL of the documentation, the purchase is not legitimate according to Apple's Software License Agreement (SLA):
"3. Transfer. You may not rent, lease, lend, sell, redistribute or sublicense the Apple Software. You may, however, make a one-time permanent transfer of all of your license rights to the Apple Software to another party, provided that: (a) the transfer must include all of the Apple Software, including all its component parts, original media, printed materials and this License; (b) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; and (c) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License. All components of the Apple Software are provided as part of a bundle and may not be separated from the bundle and distributed as standalone applications."
from: http://images.apple.com/legal/sla/docs/finalcutstudio2.pdf
-DH

Question About Installing Individual Programs in Final Cut Studio 2

I recently installed Final Cut Studio 2, but I chose not to install Livetype on the initial setup. Now I would like to install it, but was curious why it seems to be installing all the information from the other programs I installed last week. Only Livetype was available on the "Custom Install" screen, it was blue and checked. Everything else was greyed out, but still checked. However, it seems to be repeating the same install process I did previously; and I am curious if this is going to create any redundancies on my computer. Any help?

Thank you for your quick response David!
1. Great! Glad that worked out.
2. When I say FCS 2 I mean the suite that came with Final Cut Pro 6, DVD Studio Pro 4, Motion 3, LiveType 2, Soundtrack Pro 2, Color, Compressor 3. I'm pretty sure it will play nicely with a new intel machine.
When I say FCS HD I mean the suite that came with Final Cut Pro (5.1.4), DVD Studio Pro, Motion 2, and Soundtrack Pro, and Compressor 2. This version (5.1) was made to work with intel machines.
3. Thank you also for providing the link! I definitely want to make sure this is legal.
Much appreciated
~JoeA

Question about Final Cut Studio 3/Final Cut Pro 7

Last year I bought Final Cut Studio 2 and got a student discount.
I was thinking about upgrading to Final Cut Studio 3, but I saw a post that said you can't upgrade if you have the academic version. First of all, is this true, and secondly how can I tell if I have the academic version?
If I can't upgrade, I can't afford to buy the whole package again. And surely I should have been informed of this! But can I edit a project on Final Cut Pro 6 and then work on it on Final Cut Studio 7, and back again? I presume not, but it's worth asking because I'm pretty much screwed if not and I can't get the upgrade.
Thanks

I want to upgrade because the macs at uni have upgraded, and I don't live near the uni I attend so it isn't practical for me to stay in their edit suites till late like everybody else does. I only bought the mac and final cut studio last year for this reason! So I prefer to edit from 2 machines: Mine, when I can, and the ones at uni when I'm collaborating with the 'crew'.
However, I cannot see academic version written anywhere. And I know this is going to make me sound even more stupid than I already do, but I can't remember if I got the student discount on Final Cut, or whether it was just on the mac. Does anyone know where I should be looking. I've checked the 'about final cut pro' details and looked through the packaging (and my emails for the receipt) but I cannot see anything.
Thanks

Final Cut Studio 2 upgrade... Urgent question please!

Hi,
I have just bought what was sold as an upgrade from Final Cut Studio to Final Cut Studio 2. Can anyone else who has got this please confirm how many DVDs were contained within the package and provide me with a list of the titles?
It looks as if I am missing some installers as I only have 7 discs.
Cheers
Rich

These are the 9 DVDs you should have...
Final Cut Install
Motion Content
LiveType Media 1
LiveType Media 2
DVD Studio Pro Content
Audio Content 1
Audio Content 2
Audio Content 3
DVD Tutorial

Upgrading Final Cut Studio to another machine

I have Final Cut Studio 5.0.4 running on a G5. This was an upgrade from Final Cut Pro 1.0. I not find the original discs but I do have the reciept and the books. I would like to upgrade to the current version Final Cut Studio on an Intel Mac. Can I?

Only if you have the original serial number.

Final cut studio 3 upgrade question

I have Final Cut Studio 2 and I am thinking about buying the upgrade to 3. And I am selling my final cut studio 2 to my little brother when he goes to college. My friend said that if I buy the upgrade version of FCS 3, that if something happens, I need to reinstall FCS 2 first then install the upgrade, that I can't clean install from the upgrade discs. Is that true? I haven't bought and upgrade version before. And I don't want to buy this and find out that I can't clean install from it.
Thanks!

To clarify...
If you have a full version of FCS2, and you purchase an upgrade to FCS3, you need the serial number from FCS2 to perform the upgrade. If your system crashes, or you need to do a fresh install, your FCS3 will be of no use without the serial number from FCS2. Selling it to your brother technically would mean you're running the same program on two separate systems. To do this the right way, purchase an older version of FCP and get a fresh serial for your install...
Blessings,
Craig

Another Final Cut Studio 2 question...

Similar Messages

Maybe you are looking for