Another Flickering Blue Screen: When clicking on Video Links

Ok, so i recently took my computer into the apple store to have my screen replaced because of a discolored spot. when i got it back i saw on the receipt that they replaced my motherboard because of an accidental damage.
that was about a month ago. it's been working fine since then. but today i found out that when i was on facebook and listening to itunes, i clicked on a youtube like someone posted and i got my whole computer to flash a blue screen (like when it's starting up) and then it took me back to my desktop in about 4 seconds with all applications closed and just starting up, almost like it rebooted my computer in a matter of 4 seconds.
i thought it was itunes, so i turned it off and clicked on the same link on facebook. same thing happened.
so i thought it was that one link. so i clicked on someone else's youtube video link. same thing happened.
so i thought it was facebook, went to a website (engadget.com) and clicked a link to a video they had uploaded. same thing happened.
but it's only when i click on the link to go to another page of a video. if i clicked on the embedded video it would play fine.
so i took a video of this happening on my cell phone just so no one knew i was crazy if it randomly would stop happening. and sure enough, i restarted my computer, and it all went away now, so i can't recreate the problem.
i don't use any external monitors ever, and i know that's been the issue for many other people on the forums with this issue.
do you think it was the motherboard being replaced? or is there something else it could have been?
i can provide any details you may need to help determine any issue

I'm not sure if there is a workaround to this but I would probably file a bug for this at https://bugzilla.mozilla.org

Similar Messages

How to show a variable screen when clicking on direct link of report in ,when that report is used as target in RRI alsoRRI

Hi All,
I have created RRI between two reports and the type is web template/WAD.
My requirement is to show the variable screen of target report when clicked on direct link and it should not show the var. screen if it goes from jump/go to.
while currently I can not see var. screen on both the places and when switching the var. scree. display on in web template , it shows the screen at both the places.
Please suggest.
Thanks,
Anu

Hi Anu,
"And when I am using another var. in assignment details which is ready for input (in both the queries), its not helping."
Did you try using such a variable? What kind of a problem do you face? I am sorry I am still trying to understand your problem. I am just saying that which variable you use is not important for the first query. Only in the second query, add a variable with ready for input (I am not sure why the other doesn't work, I just tried and it gave an error, that's why I suggest this) and in RRI connection make the assignment with this variable. Please try this and let me know the result.

G560 Laptop Blue Screens when I view videos on youtube.

Hi,
This started a day or two ago, when I was on youtube. It would just blue screen, and then restart the computer. I didnt know what caused it at first, when when i tried youtube again, the same thing happened. Any ideas?

http://forum.lenovo.com/t5/IdeaPad-Y-U-B-V-and-Z-series/Lenovo-Ideapad-Z560-Graphics-Card-Issue/m-p/...

Blue screen when attempting to use the dedicated video card

I keep getting a blue screen when attempting to use the dedicated video card.
I managed to install the AMD driver for it but without the other components like the Catalyst Control Center as it blue screened on startup when attempting to load the Catalyst Control Center.
The OS loads fine. Any applications that don't use the dedicated video card runs fine. All other drivers install fine as well.
Applications like games and Photoshop that switch to the dedicated video card on startup automatically crashes, the OS freezes then a blue screen appears.
What could be causing the problem? This problem just recently appeared. Two weeks ago.

boogs wrote:
I tried installing the drivers for my laptop from HP's support site. Still the same result.
This problem only appeared a few weeks ago. Before that, the same drivers from the HP site installed and functioned normally.
Could this be a problem with the graphics card itself?
Note sure but if we can know the system P/N others can look to see what drivers it has for the graphics to know what is there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Blue screen when unplugging phone charger from USB

My HTC Droid incredible 2 causes windows 7 crash (blue screen) when I unplug charger cable from desktop USB port. It does not matter whether I have unplugged the phone from charger BEFORE unplugging the charger cable from the USB port. Has anyone else had this issue & resolved it?

On your lower right hand corner is an icon that is used to disconnect your usb devices safely.
simply click on it then select the device you want to remove, the computer will say "Device is safe to remove" then unplug the usb cable from the computer.
Additionally try another usb port on your computer and see if that corrects the problem.
Another thing to do is before you hook the phone up again do a system shut down and restart. Then plug in the phone. This may load your usb drivers correctly or the system will repair them.
Good Luck

IMac will only safe boot (blue screen when not safe booting).

A buddy asked me to help with his Intel based iMac. It was giving a blue screen when trying to boot up (and an odd cursor along with the blue screen). The cursor moves around the blue screen but looks like two cursors. One cursor is a normal arrow pointer, the second is a rectangle about .25 inch wide and 1 inch tall made up of about 10 horizontal lines.
I'm very familiar with Macs and OS X and was sure it was probably a messed up preference file (most likely login preference). It wasn't.
Here's the odd circumstances:
I have an intel macbook that if I use firewire target disk mode I can boot just fine off his iMac.
His computer will not boot off my Macbook that is in firewire target disk mode.
We cloned his hard drive to an external firewire hard drive (using Carbon Copy Cloner), my Macbook boots off it just fine, his iMac will not.
He's been wanting to go to Leopard so we upgraded his computer (did basic upgrade), but it still blue screened (with odd cursor).
Then we did an erase and install. Still no difference in behavior.
I would almost be convinced that it's a hardware failure, but it will safe boot every time.
Here's what happened when it died. His son was playing a Star Wars game (I'm not sure which one). The kid was in the middle of the game and paused it when it was time for dinner. When the kid went back to play, the computer was frozen. They tried everything to unfreeze it and ended up powering it down. Started the blue screen ever since.
He's going to contact Apple (it's barely still under it's warranty) but I was hoping someone here has another idea what it could be.

I found this topic while trying to find an answer to my problem. It seems we have a similar thing going on with our imacs (although mine is a much older crt imac). I'll copy and paste my original post from the imac board :
Hi
I received a free imac snow (G3 500mhz) from someone. He told me it was broke, and someone told him the logic board needed to be replaced.
I brought it home and tried to start it up. It gave the '?' folder icon. I started up from an OS 9.1 cd - Success! Except there was no HD. I opened it up and discovered that the HD wasn't connect to the ATA cable. I was able to start up to a previously installed Tiger. Except once it booted it would quickly freeze - the mouse pointer would turn into a scrambled beach ball (very strange) and wouldn't move.
I did some research and found about the potential problem with OS X and the imac's firmware. I restarted from the 9.1 CD and installed that OS. Everything seemed fine and was running ok (from my limited time on it). I then DL'd the latest firmware for the imac (4.1.9.) and tried to run it. Except the message came up that the latest firmware had already been installed. So i guess thats a good thing. I don't have to worry about firmware being a problem.
So i did a zero out wipe on the HD and installed tiger from the dvd. But on the first restart after installation (where i should go to the set up assistant) I get the scrambled beach ball and it freezes.
I thought perhaps the HD is faulty and ran disk utility on it - it came back as fine. I doubled checked to make sure it was set to 'master'. it sure was. I decided to swap out the HD anyways since i can't see what else could be the problem and put in a different 30gb IDE drive. I once again zeroed out the drive and did a fresh install of tiger. On restart i get the same scrambled beach ball and the freeze.
I guess i should describe the scrambled beach ball. It's seems like the beach ball icon, except the bits that make it up are out of order and glitched out.. perhaps a video problem?
Could this really be a logic board problem? It was working in OS 9.1 fine. It starts up from system CDs and DVDs fine. Wouldn't a logic board exhibit the same problems on those systems?
Anyone have any idea?
Update - starting in Safe mode (restart with shift held down) works, and i was able to update to the latest version of Tiger, but once i restart with the full system i get the same problem.
This seems to me that it ISN'T a logic board problem, but more of a system software problem. Now my question is how do i isolate and fix the problem in Tiger?
I guess i'll post this question in the Tiger forum, but if anyone has any ideas please let me know.
Thanks

Windows Blue Screen - when trying to re-sync an IPOD after doing 5 R's

My windows based Itunes failed to recognize my ipod, so I trouble shooted and finally ended up doing the 5 R's.
This resulted in a "Blank Ipod" (after restore).
I was able to successfully get Itunes to recognize my ipod after the restore. That is when a "major problem" occurred.
When my 37 gigs of MP3s on my PC attempt to automatically update onto my "blank ipod", my system crashes giving me the dreaded windows BLUE SCREEN! The error messgae indicates that a physical memory dump occurred and the system shuts down.
I figure it has something to do with all of those gigs trying to update onto the ipod. SO, I start to manually transfer (drag and drop) about 100 mp3s at a time onto the ipod within itunes. It still crashed after the 3rd batch of 100 mp3s.
Has anyone experienced this? Does it have anything to do with Mirosoft's newest IE vunerability? I use Firefox usually, but sometimes HAVE to use IE. What can I do?
This really *****.
thanks for your help.
Zeppy
Dell Dimension Windows XP

hi zeppy!
hmmmmmm. a 0x7E? that's not the most commonly reported BSOD code here.
but the MS KB seemed to have at least one clue for us.
(1) sometimes people can get blue screens when they plug in an ipod if their FireWire, USB, or dock has gone bad. i see from that STOP message resource that the 0x7E can be associated with dodgy USB.
by way of tracking down that possibility, do you still get the BSOD if you connect to a different port? (or, if you've got a dock, connect directly to a port instead?)
(2) on general principles, we'd better check for malware. download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer online scans, run those as well. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
(3) especially if you've recently installed any new hardware on your PC, head into Device Manager to check to see if there's any alert/warning messages showing up next to any of your devices. if you see any, what do they say?
(4) let's also let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence for the Apple engineers to analyze.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Blue screen when powering off

I recently purcahsed a one year old Lenovo 3000, it had Windows XP installed and I upgraded this to Windows Vista with no problems. I then renamed the laptop and deleted the previous owners user files and that's when I had a problem. When I power down the laptop I get a Blue Screen saying something about a dump and saying it was doing something to protect my PC ? I found some kind of fault finding log and it mentioned something about the pc's name and also something about being unable to access a certain user file. I changed the computer name back to the original one and unerased the original user file but I still get the Blue Screen when powering down.
Is it possible to get a replacement software DVD that will get me back to square one please, thanks for any help. Dan McLean in Port Glasgow.

This really sounds like shoddy drivers combined with an IRQ conflict.
I suggest you post your IRQ's from System Info, for example:
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 12   Logitech-compatible Mouse PS/2   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   RADEON X800 XT Platinum Edition   OK
IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
IRQ 18   Creative SB Live! series   OK
IRQ 20   NVIDIA Network Bus Enumerator   OK
IRQ 21   Standard OpenHCD USB Host Controller   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 23   Standard Enhanced PCI to USB Host Controller   OK
Also, as you intend to DL and install the nVidia Drivers make sure you get the sound drivers from Realtek Downloads too.
What Drivers are you using for the AIW?
Take all the Driver CD's and make pretty Christmas tree ornaments out of them
~Edit~ I just looked at the stop error again and realized I misread, then I saw Supershanks post My initial suspicion is likely to be wrong, but it's worthe a look anyway.

Windows Blue screen when I connect iPhone to my PC.

I've narrowed down the cause of the Windows blue screen when I connect the iPhone to via USB. If there are photos in Camera Roll I get the blue screen. When there are no pictures -- no blue screen. I can reproduce this every time now. I can live with this for now but want to be able to report it so it can get fixed.
Does anyone else have this same problem or something I can do to resolve myself?

Hello to everyone who is posting here and still encountering a blue screen.
Posted below are a couple articles that speak about this. Some which may or may not apply to your current blue screen.
iTunes 8: If Windows Vista displays a blue screen error message when connecting iPhone or iPod
Symptoms
After installing iTunes 8 for Windows, some users may see a blue screen error message when connecting iPhone or iPod to a Windows Vista computer. In some cases, the computer may immediately restart when connecting iPhone or iPod to the computer.
http://support.apple.com/kb/TS2280
Updating the drivers on your Windows PC
http://support.apple.com/kb/HT1768
What to do when Windows XP or Vista computer displays a blue screen error message when syncing the iPhone or iPod touch
Symptoms
An error message may appear on a blue screen when syncing a Microsoft Windows-compatible computer (XP or Vista) and an iPhone or iPod touch with saved photos (taken with the iPhone camera or saved from Safari or Mail). This issue can also occur due to a USB driver conflict with another device connected to the computer.
http://support.apple.com/kb/TS1502?viewlocale=en_US

When i search for a website it takes me to another website. I will click on the link and it takes me to one ive never wanted? please help very frustrating! I am not very computer savy, is it my settings or something? Jen

When I search for a website it itakes me to another website. I will click on a link and it takes me to something completely different or yellow pages etc. Please help I am very frustrated and not very computer savy! Thanks! Jen

Hi Jeff I have uninstalled Muse from my applications and have tried to download the new version but it displays a message 'file not found'. I have included a screenshot.

Computer goes to blue screen when ipod plugged in.

I have tried all angles on this and still haven't been able to figure out. Can somebody please offer some new knowledge? I have tried some older suggestions awithout resolution. Here is what is happening using Windows 7/lastest updated itunes and ipod 80g classic:
My ipod was completely erased after trying to update through itunes as i normally do. Now when i plug ipod into the itunes, it will not be recognized in the left column and after about 3 minutes my entire computer will go to blue screen and reboot itself. I have tried restoring, checked diagnostics on ipod. I think I may need some more info on opening itunes in safe mode and beginning from there, however I'm open for any other suggestions/links. Thank You

First off, have you made sure your Windows OS is up to date with all the latest patches and updates? Have you also checked with your PC's manufacturer (such as Dell, Toshiba, etc) to make sure you have all the latest drivers, firmware and BIOS installed?
Does the PC ever blue screen when the iPod is NOT connected?
B-rock

Blue screen when installing Win XP Home

Getting blue screen when installing Win XP Home on 915P Neo2 Platinum motherboard with the on-board LAN port enabled! Any idea to fix this?

disable onboard lan then reneable it after you get xp installed see if that works. try to get the latest bios for your motherboard to.

Blue Screen when burning a DVD

When I try to burn a DVD the systems crash with a blue screen when "compiling media" is at 95%. Windows returns a post error "PX Engine has stopped working properly". I have followed all steps in both pages http://forums.adobe.com/thread/415318?tstart=30 and http://helpx.adobe.com/premiere-elements/kb/troubleshoot-system-errors-freezes-burning.htm l. The PX Engine is installed by Premiere and I also tried to install an update of PX Engine as instructed by Microsoft Help. Any help? I have a Windows 7 Home Premium 64bit SP1 on Dell XPS (Intel i7, 8 GB RAM, 250+ GB free hd space).

A BSOD is a very serious matter. It is most often caused by hardware, or low-leve drivers interfacing with the OS. This ARTICLE goes into much more detail. It also provides links to tools, that might be very helpful.
I would start looking for:
Heat (DVD burning, like Rendering and Export, is very intensive)
RAM (DVD burning might well be using RAM that sits unused by most other operations)
PSU (DVD burning requires more power, as the HDD's and multi-drive are all very active)
Good luck,
Hunt

Blue screen when login when try it recover a lock appear as login

blue screen when login when try it recover a lock appear as login

Interesting. I've never performed any of the steps documented above and all of my BIOS updates (and updates via System Update) have been applied with no issues. Perhaps I'm just living dangerously?
Several items, however, were omitted:
Fully charged battery
Connected to AC supply
Not in a docking station
These items have been true from day 1 of ThinkPads.
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

2012 macbook pro retina display artifacts on screen when using onboard video

2012 Macbook Pro Retina Display artifacts on screen when using onboard video.
About a month ago I've noticed these strange artifacts (blocky pixelated looking) running vertically down the screen. It first started when using Safari. Then it started to happen all the time. I turned off the auto switch video in preferences, which I'm assuming forces the computer to use the separate video card and the artifacts go away.
On top of that issue I also have had the ghosting issue.
Anyone else have this problem?

artifacts onscreen could mean a faulty gpu. You said by forcing it on inbuilt gpu you do not find this issue highlights that. Do take it in to apple for service and also tell them of your ghosting issue.
There are a few retina owners who have faulty gpus.

Another Flickering Blue Screen: When clicking on Video Links

Similar Messages

Maybe you are looking for