Another G5 problem thread....

Hi all!
New here. Wish I didn't have to be, but not getting any satisfaction from the troubleshooting guide in the manual.
I just bought a used 2.0 ghz dual G5 power Mac from a local guy and it started doing this after second power up.
It has two 1gig dimm cards in proper slots and a 160 gig hard drive.
After removing and reinstalling (carefully) the hard drive to see what make it was, upon re-start I get a red light on the logic board and the fans by the hard drive are racing. All works okay with safari/web, etc... still has the old Tiger OS, but not sure this would be the problem.
I tried a PRAM reset and reset the PMU, but still no joy.
Any thoughts or questions to try and keep this unit from going into the SF bay?
Just kidding.....
maybe.
Cheers,
Brian.

Thanks BD,
The computer does run and screen comes up, but like I said, the top shelf fans go full blast and the red led comes on behind the power switch on the logic board.
He had cleaned all info/files off the machine and re-installed the Tiger OS before he sold it to me. Drive is clean as a whistle except for the standard Tiger apps.
I was going to install Leopard but wanted to address the problem first.
I read some of your previous posts about the resets and performed all that I could.
Just weird how it booted up fine then started doing this. Is there any rumour of a virus coming down over the automatic updates Apple sends?
I know Apples don't get viruses typically, but something is going on here.
I do not abuse these things. I worked in the aviation/electronics industry for 25 years, so while I don't know computers inside and out, I do know how to plug components in and out. BTW, I just replaced the battery and still no joy.
Cheers,
Brian.

Similar Messages

  • Another static problem thread - Soundblaster Audigy 2

    I have read through many many topics about people have problems with the Audigy 2 ZS's I have tried many solutions people have had that fixed their problem or at least helped it nothing has worked yet.
    Here is my problem, I get static while I play games coming through my speakers or headphones whatever I am using. The static isnt as bad with some games but it usually starts 5 minutes into the game it varies by game shorter or longer, but after it starts it gets worse, louder and more persistant as time goes on. It gets to a point where its just unbereable all I can hear is just static. After I exit the game and listen to music or something the static will go away after about 5 minutes or so. The static is only present when there is sound being played. Also I never hear static just from playing music, always from playing games. I have tried using different PCI slots on my motherboard, uninstalling and reinstalling the drivers from the disc and from the website. Tried turning certain options off that some people found to help but nothing helps me. Now my card has not always had this problem, it started about 7 months after purchase just out of the blue.
    I had emailed the Creative support, but apparently they dont offer any support after 60 days of owning the card, the email said to try the forums or buy a tutor for 3 bucks for every 30 minutes. I figured I would try the forums first.
    My specs are:
    AMD Athlon 64 3000+
    K8N Neo4 Platinum MSI Motherboard
    XFX GeForce 6600 GT
    WD 80 gig hard dri've

    WOW what a horrible card. Absolute garbage.

  • Yet another grey folder thread, help!

    Sorry for yet another grey folder thread, but here goes:
    Today, earlier, installed Firefox update, along with some addon updates for that program. Quit Firefox and attempt to relaunch, relaunch fails. Reset computer, thinking that will do the trick, I now have grey folder with question mark.
    Resolve attempts: reset pram = fail; apple care cd = will not launch/fail; disk utility from original install disks = fail; cannot get repair of disk or permissions to work, continually get error about "failing on exit"; safe mode launch = fail
    So, I've done everything, and I've come to conclusion that I am f***, and my HDD is fried (but I hope I am wrong).
    So, dear gurus, my question(s)
    A) Is my HDD salvageable at all? is there some trick to getting the AppleCare cd to work? Anything?!?!
    if not, then B) How can I recover my documents/music/pictures? Long story short, there are several things on there that never had a chance to make my back up schedule, and I desperately want to keep them. Any way to make/copy a disk image to save the docs/imgs, or Firewire them to an external hdd? Do I need to consider a professional HDD rescue?

    Looks like a mechanical failure, and Apple won't cover the replacement due to a drop it sustained a year or two ago (the power cable was in, and it fell on the connection point, denting that in, Apple states there is a critical board their and that it would be $950 Tier 3 repair which I can't afford). So I'm going to try a Firewire Migration and a few other things and see if that works. If not, oh well. Thanks everyone for the ideas!

  • Another Install Problem (With Log Files)

    Hey there.
    I've read many of the install problem threads and have tried numerous things to get this working, but to no avail. This is getting VERY frustrating.. :-E
    Machine is a Dell Latitude with 1Gb mem, Running XP Pro SP2.
    My login ID is dgault.
    I've set my temp directories (temp and tmp) both to point to c:\temp
    Hera are my log files:
    ====================================
    XE.bat.log -- START
    ====================================
    Instance created.
    ====================================
    XE.bat.log -- END
    ====================================
    ====================================
    CloneRmanRestore.log -- START
    ====================================
    SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora";
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\rmanRestoreDatafiles.sql;
    SQL> set echo off;
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-03114: not connected to ORACLE
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\cloneDBCreation.log
    ====================================
    CloneRmanRestore.log -- END
    ====================================
    ====================================
    CloneDBCreation.log -- START
    ====================================
    SQL> Create controlfile reuse set database "XE"
    2 MAXINSTANCES 8
    3 MAXLOGHISTORY 1
    4 MAXLOGFILES 16
    5 MAXLOGMEMBERS 3
    6 MAXDATAFILES 100
    7 Datafile
    8 'C:\oraclexe\oradata\XE\system.dbf',
    9 'C:\oraclexe\oradata\XE\undo.dbf',
    10 'C:\oraclexe\oradata\XE\sysaux.dbf',
    11 'C:\oraclexe\oradata\XE\users.dbf'
    12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
    13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
    14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
    SP2-0640: Not connected
    SQL> exec dbms_backup_restore.zerodbid(0);
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SQL> shutdown immediate;
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> startup nomount pfile="C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\initXETemp.ora";
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> Create controlfile reuse set database "XE"
    2 MAXINSTANCES 8
    3 MAXLOGHISTORY 1
    4 MAXLOGFILES 16
    5 MAXLOGMEMBERS 3
    6 MAXDATAFILES 100
    7 Datafile
    8 'C:\oraclexe\oradata\XE\system.dbf',
    9 'C:\oraclexe\oradata\XE\undo.dbf',
    10 'C:\oraclexe\oradata\XE\sysaux.dbf',
    11 'C:\oraclexe\oradata\XE\users.dbf'
    12 LOGFILE GROUP 1 ('C:\oraclexe\oradata\XE\log1.dbf') SIZE 51200K,
    13 GROUP 2 ('C:\oraclexe\oradata\XE\log2.dbf') SIZE 51200K,
    14 GROUP 3 ('C:\oraclexe\oradata\XE\log3.dbf') SIZE 51200K RESETLOGS;
    SP2-0640: Not connected
    SQL> alter system enable restricted session;
    SP2-0640: Not connected
    SQL> alter database "XE" open resetlogs;
    SP2-0640: Not connected
    SQL> alter database rename global_name to "XE";
    SP2-0640: Not connected
    SQL> ALTER TABLESPACE TEMP ADD TEMPFILE 'C:\oraclexe\oradata\XE\temp.dbf' SIZE 20480K REUSE AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED;
    SP2-0640: Not connected
    SQL> select tablespace_name from dba_tablespaces where tablespace_name='USERS';
    SP2-0640: Not connected
    SQL> select sid, program, serial#, username from v$session;
    SP2-0640: Not connected
    SQL> alter user sys identified by "&&sysPassword";
    SP2-0640: Not connected
    SQL> alter user system identified by "&&systemPassword";
    SP2-0640: Not connected
    SQL> alter system disable restricted session;
    SP2-0640: Not connected
    SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\postScripts.sql
    SQL> connect "SYS"/"&&sysPassword" as SYSDBA
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> set echo on
    SQL> spool C:\oraclexe\app\oracle\product\10.2.0\server\config\log\postScripts.log
    ====================================
    CloneDBCreation.log -- END
    ====================================
    ====================================
    postScripts.log -- START
    ====================================
    SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql;
    SP2-0310: unable to open file "C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmssml.sql"
    SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\dbmsclr.plb;
    SQL> DROP PUBLIC DATABASE LINK DBMS_CLRDBLINK;
    SP2-0640: Not connected
    SQL> CREATE PUBLIC DATABASE LINK DBMS_CLRDBLINK USING 'ORACLR_CONNECTION_DATA';
    SP2-0640: Not connected
    SQL> CREATE OR REPLACE LIBRARY ORACLECLR_LIB wrapped
    2 a000000
    3 1
    4 abcd
    5 abcd
    6 abcd
    7 abcd
    8 abcd
    9 abcd
    10 abcd
    11 abcd
    12 abcd
    13 abcd
    14 abcd
    15 abcd
    16 abcd
    17 abcd
    18 abcd
    19 16
    20 51 8d
    21 LSqVp2u3D6yxyD42bHCkpHL03/8wg04I9Z7AdBjDpSjA9TNSMjO9GP4I9Qm4dCtp6jfnlRLO
    22 EXUFAGLlV0fbBvBjoirfWNdXU3VV0WYkgIWTZhXOjnGHQ2VzowkkIKuoKmprxsHwQ=
    23
    24 /
    SP2-0640: Not connected
    SQL> DROP TYPE DBMS_CLRParamTable;
    SP2-0640: Not connected
    SQL> DROP TYPE DBMS_CLRType;
    SP2-0640: Not connected
    SQL> CREATE OR REPLACE TYPE DBMS_CLRType wrapped
    2 a000000
    3 1
    4 abcd
    5 abcd
    6 abcd
    7 abcd
    8 abcd
    9 abcd
    10 abcd
    11 abcd
    12 abcd
    13 abcd
    14 abcd
    15 abcd
    16 abcd
    17 abcd
    18 abcd
    19 d
    20 4be 207
    21 3WAupYEFJyUtDT58GzFPeWkUS6wwgwKJr0hqynRAv7leuFljpGFIgxvNNkagWXCAOYNjnLy1
    22 ulbIGu/7Jr4I+E4ghHw/fZT2AjJ43oXGRL90ldDxQSra1CPcaBsAtcpUa02tik8fNqx/KMgr
    23 633l8+Va2DhCmvZXp9G7vbOPt7Pl3MM9zMw2e9Y0okY53GpiRO894C9geS1Y7KzzE/IgLaEu
    24 32gKwpBN6M0RCm7BYQ+ovzICzvY5VVyfs/mJp4oYS98qQpcbag5dyZAf0OP/aKDRu8nMxkFb
    25 i/etbPODbix+jSyOsHVw8+Q+m5vbJnoYgrAEVyEgB3LQctJbF95qK2fWuM+PzvFnTTxAGGzD
    26 bbFaBpyXAP09LtZsxHxeICUOFvBRezKHmWrTb5DRlika6Lg9ukf6Rh9Vb+74Kw+dCaqdPNsm
    27 BbgD7N+pj3pEKfdUH3CrGeQtEflPW7LZ5wEdk1k/oTs5nee7t70+LOfUmSdFznr3wK/OVfn4
    28 KShfwfMR
    29
    30 /
    SP2-0640: Not connected
    SQL> CREATE OR REPLACE TYPE BODY DBMS_CLRType wrapped
    2 a000000
    3 1
    4 abcd
    5 abcd
    6 abcd
    7 abcd
    8 abcd
    9 abcd
    10 abcd
    11 abcd
    12 abcd
    13 abcd
    14 abcd
    15 abcd
    16 abcd
    17 abcd
    18 abcd
    19 e
    20 41f 191
    21 WGxKHaEucYlWwCTtmi+GiJKjekYwgwK3ctxqfHQHrbs+zza9qFIBBo/k3vRdV42GdJcBu7Vv
    22 ITu0l2CDDI1d+D9K6+h7yxxZwO9Xtk4x8RFMvTqmcLYXjeAqvfUCO0DbqqDG+0SG03B8N8zU
    23 x3CB7ZzBJqbdVlPKP72aumnr8weouKrQT4tmBg3nhDN3+4ve7JkpJVEIEI+T5dJDg3IF2nEb
    24 xv03mcyUhyCvDbOazgEBY+LaQTQ99WwuW3WZw4y5xOakbH7mnBiomlFxUQglR1Hft6tRchhS
    25 tJTSEuprYV4kbm7IcRmC1LRlilvfcjDmMRWJUyC8NDvKu45v5GiDxx268uhVJTkhTBGaNgPz
    26 idKIcZk/6eV4Myw05MkyijGkKIEIpR3Fl0SO
    27
    28 /
    SP2-0640: Not connected
    SQL> CREATE OR REPLACE TYPE DBMS_CLRParamTable AS TABLE OF DBMS_CLRType;
    2 /
    SP2-0640: Not connected
    SQL> CREATE OR REPLACE PACKAGE DBMS_CLR wrapped
    2 a000000
    3 1
    4 abcd
    5 abcd
    6 abcd
    7 abcd
    8 abcd
    9 abcd
    10 abcd
    11 abcd
    12 abcd
    13 abcd
    14 abcd
    15 abcd
    16 abcd
    17 abcd
    18 abcd
    19 9
    20 3162 65e
    21 igQsRO8he8CDCdDl4nWpC6D62Xcwgz0T2UgFey9AmP9euDHhTNtIIypFDhpSVolmshjyUX7k
    22 SDMhxRY91oYjSjLiIwWaV61R3iM8yqEjBdxa/QqeVR3pZs7ue/BsPqTYpXW8XRTJmbmDO5
    23 y6g6sM26+9djcF+m6Fqq8mC6NyZn6S5/u5YqlKUW6Z0/jFVzc+7lxa51jAi2w83JxUetuepc
    24 Egxc0uEGzxAtwztimeUcybwG552DvNxfbRYPmlZcF9ms5bun8tEOU37kSxAxwg78sGNmXyJg
    25 Jp+fefVhVk3C9oZaBEqX7v/i8BgyRDcEjUz9lIky1qFGl+LwK6UjnlZNwvaMFeGiVd1F/AUF
    26 mHTk3md05YqDaT+DTqV8W1zC30fR3VfRvaLGYXiY3Q7FSir0QtQzyR8EXCMAYA3EXEaUFpex
    27 HwxcYAocVlx+EIrX0XzluGgiDXiY3Q4l/lmPizTlkrkJ9LGUPSicGFqTaYHrCe0hotIXVND2
    28 F7HUVK9cmOiDrcMQA+iDHp686BzH3ZSlKjFqVM6JTMPDsiJPMkNbw/6M6OgXOuH2yHO9AMlb
    29 OziQdfrmRltzw9EUNffiMMtRhoLdqYs1e2XMMqCVgGctzFg7P2tU+kbANpabiyUIvhhaAu7a
    30 xyvmPVJnmysL4u823iZM2GqZiZCpKW3Qv4NbJpkxn9LDl13NZ651CmCRtTHYpzbEOxcukq0t
    31 lwO08hc0bwA3SconEG/mRIBo82vHgSlwIZu7C4AMzIIYYHFCc85MYN2EANfivUZrD486W1F/
    32 gR3t490htjoHcFdVf1DiPqkXdtb79WooM4LoLHkw8U+qpiF2NYvSl6lJgb7BVdDiI3dux9EI
    33 z61yE26Ss4Fd8U7cZM56fUJJ7aWLcdeAiNbVenhTe3KFBHHuOq+tP/9upKGieCQXcjKNfxCw
    34 +1WK69iQf7XbU9OsMBAoNQ7Bo27SJLPVjEvTtkKuNfMrly1CbKAe9AzUNy5bE5S593CX54xc
    35 Vw68Qij7gam+GE04w25o+7JJ3oiAgi8jYYbYD2zZxIWMz4MmrVq3eE390NbSHyo7jwHegxKK
    36 f3h+yaUTftrGMN6jT2lokTEy1KiyE7MSEwHBtNF5y79IE8xyVuVpIMIMc0DE/TJ0uJ7SOfLE
    37 6SqgfhRxYRnsuAM1/GFNB7fwRPx19omV1+MCt2mBmwWKreim3q4NJgWKrexOr0FoZGET9buf
    38 RaRVyXcxl/K3Xu/C19hkaqBibbH9eQf9JAWUOtDPAvh/ThmIIy15+VGDFNmummh9SXftWiSE
    39 D0vX9JgmaYFFgfMECrWS664SELEFQKBDY2tyhUXo5a0E6EMyi2X4B+aqeJszH5WuDGcKF+d/
    40 7NklyocS0C9rvMWyDj1qV73XI6vfmBdSFS55SOx3O5uzoKk4Vw3sFlLVkwyA3w2fuV/6PcOI
    41 mayz9ZGxGT3tryZDopGviZT6Zd+BJdzRDexA9vz6kHEnKqSxtLQws8Nbtzm7e+9X7kd2yDnN
    42 zdju2xPRoVlXR/M41DFx8QRY5B1OfryhhCITa25oua0+Yrt8bQJCmke63jDNWP+92nHIEU+e
    43 eWu1mrm9oOz5JJXuag+ENbhu
    44
    45 /
    SP2-0640: Not connected
    SQL> show errors
    SP2-0640: Not connected
    SP2-0641: "SHOW ERRORS" requires connection to server
    SQL> CREATE OR REPLACE PACKAGE BODY DBMS_CLR wrapped
    2 a000000
    3 1
    4 abcd
    5 abcd
    6 abcd
    7 abcd
    8 abcd
    9 abcd
    10 abcd
    11 abcd
    12 abcd
    13 abcd
    14 abcd
    15 abcd
    16 abcd
    17 abcd
    18 abcd
    19 b
    20 933d 1c32
    21 LjzBBzQRtLt3jlDfh/c2/PSd1T8wg1VMr0iGl8DXM4HqbvrJkWfzixk0XWxmoBbxAb73ueCM
    22 RRbLF4Q2NZ+TRL3Ilc/PFpNhoqGGvhwPEl1/yYy50S2Sbuvp5ZgYt02SeKOCl+i5zJx/KFxp
    23 aZ/LBLWh73oUCRg8SdRqDz1a39OEKQKgLDQEZJMtce5ef+zwT5ZUAAEz+DyK3yH1r6W9A6po
    24 7D0uukDHeE98+B48WYNUwiLGik+f6u8SGxS1NCqCLEJ2L+t3M70DnS5Hitkt7rbJtWV/mbaY
    25 SUf5MnL9HkDmkEmHIjgzBbALmCL5OJiaYZ89pClOS+R5SYmyKWzrsIqf8r3w2E9C7RImcZ/S
    26 PpiQK13CjK4xzdtRdwDHc+QzxAc6TEsQl0hJnMUhQ4JSOrEScdGrIg3/vyM+IHMCRPgaVdyW
    27 QwNz5BCwH3l7DyS7I9rtz0o42vmIMPki/JV51sHtvfA3KX/YHCrw73K6F3iVIvxALReJLslq
    28 D2EfaNl9/jEPJM3UfluFv4B9udP9PIr9vlcV2XlOnFshHFvkM/i7mPMqWyxzU8ItLAPNQXOf
    29 A4H5hrHQlWGBGTicoCZTSI2zFvC3BnJxDdSCxCqMbq2nax8YekAYxpnXgFXwEMHX983iJnIF
    30 Ts5j/DsoNO5LzewGJJpMeW6xn6Ne2e99xjPoDZmlcmt+O5e/QFVwJD6lwfP9a0v4ds8mjJb+
    31 TsGz4AS6uQe5G5v+16q1EoEPtde1/k+1CJ21Tk+qqpq2WjzNMzO6zSKfGblhBsIIE7+ymAqb
    32 MI16BXhySREcqDBfg70JTltZSlJ1cGVlgN8YkeGv19z6B50dxsR+PZCbg8GzKuIseoOH4GHG
    33 7m409J5hUCL1Vd3BVQAUxMTEvJs0EDBpnYiE2+zEFupuYf95bFiJPPfLee+BGcmafJCGLD/4
    34 0tCd8E4WgA8BmMWC0GgEn+5JSeJhv+LJ/IM73/OOFbgktiRFUFUIKzGQXww4iT+5ToDIdyhu
    35 KNqYlEroIub+fYYzRYZ4hc58Kl8oKCFo380RfgvrSpFsTzq665o/s1fOvdttC8nl2uL5zX+j
    36 185OV4CGkhWj+1w8JQJcoLCMpHOhJrOzIxHTmh6G0MhSs7gMlSS167uqAIsVmgaznSgKW6rc
    37 cL7OeQVtIMwIxBIw6OtBZtN10ktKYbeY/o9XopbUaXifH/4P3w0WGyUsHblz0zGydaQrKbm5
    38 uPuL+L7kLd3CHT9fH2jwpJiWzwQyJDsIOVO/EGURdMaGsPq0MYyuTsYzlfeGgDuMxcSGZmNd
    39 Ae2Z5FdOIy3wMgkfsM0Dhn/EhwNVilWtwCOZ/I7E4CNytJpiHP2fSz/VyH740Zp4YQCaUzJ+
    40 mLzH/rRqJPREB7oGsJCfsFkiwbz5TZIkBNqwCMC/KbYppPMw5P3NIUaGXUrk1sTQ7uT5UsAK
    41 V9C/11OnxpR4TLP4lBLyOrTPBfINmWUokO9/KHkkofP+XnoQR5jAkHqojfq7m09jiZAHEpGA
    42 ePrJmr0Whow8Un6YMdwLLGA/WTKAFYNg/oLuzTOo4vIj2tCHXjDvPmQEUdzfnxlkm5+2Qvcz
    43 G4NFjoG5vwPi8hD+0e2x+IYpM4/4XJpzWYcUnSZF0Sm7P7rSe9K/u9kymbsmSQO3pIv+CjT4
    44 WDRaQl5MTAkZQXceyBnWs5iUmjE8Tvhcmj/FlvGa9FPRYLwK0w40KEQi83M/qESXT6g1Oh2r
    45 NBxzeWIZCtI/lDHtVMCaskLqjrsZA49dnL31ltDAmrJSaz5kFNvwQTQFL3itnqrGqEhuxtnm
    46 aPdu0QdTCrMTNBev+mRRV0ItXV0S7AVDxHH6bxk8jf7lvrd6a/4KvlWihxq+9BrRJ7knFXE6
    47 SoxxOm02vptjf+Lk3OMF6K+HB2hhQTQFA73CD4aR4G7G2f9sSl31oUgFRzweyAU8t/7FxN75
    48 TviNBZ8clvEFLW68bHhjuRiOeCNOQVx4+vKqmhX9sJvgzaTeHvHknzr8sai8n8HZEo0ZoQa1
    49 +JQZSGaW8VWiXpyiFygqhLGoNIC/GQozijQGHnP8u1JlliWPWNtBd2sQvt9suZ4hYSwIY/M/
    50 /hV64rLkRBreD/l2Uhz1/hp6ao38giE9YUoGnMzezpWRq/lWkECwAiMWi+3LWCLO1uwjVAMN
    51 9l1VIpOHxY0/sYiB+DEaHxs8T1q5PjgzCJdGMYIpK1gt939KvMc4HLEGnao4Mwiu84s1wJxG
    52 vpb+vMtcuZBCZGV61ZCqnatorkPp4Xr3PKHege67z9V9o5+omgg5XZbCOs4l8MYp6Ib3dzyG
    53 gkO8Gkhf980Qc825jJzsJIZCjfeaVg8/FodBp9EsJo+4+qSHPaB1cxowCKVibcY8kFidAB63
    54 30Z58Dqw788cxVnmtKsAibcse8sPUhZ4aEp7RApXNZtNWsHG3XriYSNiVnL2URnL/6GU6xyz
    55 XlDcNQB3VXME6ICBt2REKZPwhgWoI3GNU1vSNkteetD8QkG9fVKhPPY1Qod4gZ9U3MWQM3BB
    56 UTIYi4tNV49YuEgb6RxkRH2LNNOGzS9VWfJJM8hBNZ/oUB+pxSDW5eTDVENm4ptMcKqOdztV
    57 HgY6Tkt6xgjaBuQ4AbwiGJu2bEI10JrzhoTsg8eVznXgzifgeqE2z4R/HAn+HNtXNSlxXyTn
    58 UTQiGJtOcInHdkPeyiihRXIQhXpdVJ1vyBdYUCBbXVK5mxyFthr/qeQ1Nadk4sabsPotel4L
    59 OhoELILFT/TuqP0zPT/aQV3YvO6WxoSnKWq71L3ysAQi6L0itmqEGMH2ODDs4zqfBBxj3Ll/
    60 blH1vWoH8LAsNwhSBaUqa3oxjxK6ISgFwICp3MraldLIR4FZotC3CIeZcgOJvsSETlf6edBD
    61 vcOwWoMUYilYEYMhaooNpg0MQnAgW+WQkUjNN+2paHivVUlW5Hw0nCXoh6TN3jyFrt34f9eG
    62 jggLV530Qs5eZ511mdL8UAdPShDOG87uPtKuJcpB9HNevdFkMBbAqLJDLnJg6PTvB+/xghSd
    63 AjP5frWAs7zIDQiDEa7H1RkczcZ+47ag0Pd66fjOjvhYaa4J84eZBZm9HSBbitLjqtD8iOCV
    64 ldaSzV6X0ADKnZIDCK4S0SISGyIQHEE0zPjueoGpaEi0rcD+ZOsZ8E3tmwD7+Qa1HUsy7xmd
    65 65LTHSTh+DEMYa7cGrA/19BMMGc6MMCIJbTLLn4PG6plCvOS6O0HQ93d6fGn+LX1W5z/2CxD
    66 wlv5dWHWX0qHuxDlO/j5Zx8Ziu2qZP6zBTBJ2ByQKT8TtPg16tQeOinOKswSRh79S9oQwX1G
    67 j2qITsQ6VfC+ZSNy3Pxk9FUdTSBnuV0y1LZI0Eo0lsgSmhIBoEEXsnG2ZICpvPst6/4N3HVV
    68 dqQvDw6fTs4sYXGUvhNOjDP24P4Ed3gOv4IQ/UP1Qz8HcL4JQEOXPqd4i1RBZjo+rMQQ6tTN
    69 Kk6Sp24/ErMivuBkyMy+/GOS6B7SBW3S7qn+JWak+OJ590Fu8A89ZhCpm2JvKbMKA9xvKbZG
    70 l5RlxbFZJjRssJsuCSgmVpw/20jaZF93A1kO9maBqYv9yHtCJgaJd0lvJ0IQHqA0BgGjvO7F
    71 Yp0NWizrz9Glvs2YYXNqt3QmCoMAz6mbYjPLKDqjXiIsXkrRpb7NmGUirgMN4vRygBaaqXKG
    72 sbmQCDq4FU6y8mt31+6mFAlFq6MyI+anWj48h75lqrJHxTL0iWan1RQJGP2eYh/LcCYIsLcK
    73 d2wJGALHoRMYHiuIWM3IAirHptM+lbICp+4s8SWLuKbTPpWD1eqL/TcfiYda+K9tCOwyuaZU
    74 T1cJ8oc8pawlmd4kMH+HAxndF1vnv1xpHraM0Qsc5Q48SdFx+vaWyy+55Q48SdTARO7LMohO
    75 aUQNIghZE0jsladaPjyHvmWahXY8SUqJ8ZyBLu6mqm2i8lKEawHOdN50JUCm8av0ieDNjdVO
    76 8I9qni729IlmikqV+6m46kQNIghm9wmJ3zZW6s7DV6YvueUOPLCGenhW6loajniOo9F23Qlq
    77 mm/LWhqO8Jfdmfl+VjLuqaLys010egwajvCX3W1nMUhLcTVTCqyjT1O4ViplE9+QZLY+lRW+
    78 Gi6VMgpfz+zh38em0z6VsgKn7kSL7xeMdYu4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwny
    79 hzylrCWZ3iQwf4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0i
    80 CEfPXX4h100MGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0AhOd6EpqHwovItM5eNOmCl
    81 OALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA/2B/bAkYVOLIWj5IFqBx
    82 V6ljQJ1idshaPquNNx/kMVT8Ffv0iVHMiDCnWj6rjTcfN8JVcL6suOpEDSJS7lQnkd9O9wPM
    83 WfSJ4O5xJegGRVxgyYIsrf2VB0cDWB3IWj5IFqB0lnwsrf2V65HtrXapovItM5eNOmCPRGMf
    84 JT+l4DTJkNqmPElKifGcKjQO0uaDKIdfsdh4pTH7FUyUd5LbTdl1B8VNgfSZ6puDbR1GmMVN
    85 gfQtcTVThEzUesM1O656giyt/ZUh13wMGo72ZHFYIJHLHraA8vrZkui4qZ3pZmNTa1Blz0Ah
    86 Od6EpqHwovItM5eNOmClOALoDaLy85/GBqZnUwqso08w91o+8v3hp9XPxXam579caR62lkeA
    87 /2B/MZyi8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W
    88 6i+55Q48SdF2DPBHySLA3xj6vBQJGALHoRMYHiuIWNfPXX6OXkuW9IkGR/taGo54jqNAH3XQ
    89 bvDg5sHNy2smFt3Pkc/eRsG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQw
    90 f4cDGd0XW+e/XGketozRCxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEfPXX6OXkuW
    91 hGZjERAGrdM+lYPV6ov9WGqS2/cJm8K8PnaPIPdaPkgWoHRPqPA1gy9nCe/3CdjtwAG8889U
    92 a95i9wlGVS1Xpi+55Q48SYcUCRglQKlDnk+eW6YVTJR3ktuZTvcDzFmvvBQJGFTiyFo+SBag
    93 cVepY0CdYnbIWj6rjTcf5DFU/BX79IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5HfTvcD
    94 zFmvvBQJGALHoRMYHiuIWNdtpLBD13apovJShGsBMDcfC1Vp3RT0UstbyvcJ2O3AAbzzMDUp
    95 AqAsNARkk8HLqYH072NdAbKWFu3IM9Yfhioess+fqbjqRA0if/xli2ueJxAGFY00Mwam7uKe
    96 JxDgVuovuWmcfyhcaR62cjQEHkDmkAei8rOS28cUCRgN6uJHeGUHgfTvY10BEF5X3Zpm9wlo
    97 aRGIIoSr1qCoqRpgZmNUEkOXz+/OS+bro2Zj55gLUqbKaFw1O640WhqOY7L72ZQilMumRpjF
    98 TYEpVpbT2ZTTPpWyAqeZW0t3pcQCHdM+6Yxlpawk/QxMV8r3CSHFHXLTPumMZaVmaWH9Vuov
    99 ueUOPEnRdgzwR4uVVHiO/G5aPm//bHnF4roBkd+W1EVrUMai8lKLphQJGP2eYmqZNAQeQNzT
    100 xcG4ptM+lYPV6ov9Nx+Jh1r4r20I7DK5plRPVwnyhzylrCWZ3iQwf4cDGd0XW+e/XGketozR
    101 CxzlDjxJ0XH69pbLL7nlDjxJ1MBE7ssyiE5pRA0iCEdtLUgWWYJ8tj6Vg9Xqi/1YapLb9wmb
    102 wrw+do8g91o+SBagdE+o8DWDL2cJ7/cJ2O3AAbzzz1Rr3mL3CUZVLVemL7nlDjxJhxQJGCVA
    103 qUOeT55bphVMlHeS25mW1EVrUMai8vPZlNM+lbICp5lbS3elxAId0z7pjGWlrCT9DExXyvcJ
    104 IcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBHi5VUeI6SdVo+b/9secXiugFd3quGR/taGo54
    105 jqNAqlm5bmr7WhqO9mRxWCA2h2kjqM1bltT2PL4dcBAGWj5Ck2qZ8pYac4+VMNcjHU+kymhc
    106 NTuuX0VfQk2so09TuGxk7VdnUwqso08E2ZRG2ncBR4SUd5LbA3J/VE8wWhqOO656gGZjVBJD
    107 l8/vx1RPVwnyhzx4Ah3kYtM+lbICp+6CGn9a/eFaJxQJGA3q4kd4rCjVITtsCRhL2m9bphVM
    108 lHeS222i8syDL0tx7l7upmdTCqyjT+g6UVTiyFo+SBagcVepY0CdYnbIWj6rjTcf5DFU/BX7
    109 9IlRzIgwp1o+q403HzfCVXC+rLjqRA0iUu5UJ5Fhcn9UT1f3CVZux/+twW7H0d5eUlXF7wM+
    110 MvSJBkf7WhqOeI6jQB8WMsdXpvSJ4M2N1U7w3Znylhpzj5Uw13u/ptiudj5slvYwNSkCoCw0
    111 BGSTII8DHUaYxU2B9MycfyhcaR62H+JdDR9b579caR62C76suAdFX0JNrKNPMOh3svSJUYH0
    112 wVoajvZkcVggkcsetoDy+tmS6LipnelmY1NrUGXPQCE53oSmofCi8i0zl406YKU4AugNovLz
    113 n8YGpmdTCqyjTzD3Wj7y/eGn1c/Fdqbnv1xpHraWiUWi8vPZlNM+lbICp5lbS3elxAId0z7p
    114 jGWlrCT9DExXyvcJIcUdctM+6YxlpWZpYf1W6i+55Q48SdF2DPBH6HdsCRgCx/++8bGHdsit
    115 uAG0aRGIh9g3RnrDvxpYsqamaCe29/g0yMgH7F/yl3oUCRh+2EL4KxYBFAkYftgK0NObaVX3
    116 CQHYWM0L7qlHN9VqQObZpeCyFF015dolRzmm3Tvf875ymb1CTfpNGkeEZmOF1OyzVS1l0z7p
    117 3zw9gL1CyPxK9U25WiZlPEczLbhni92NOIRrATAtOdObDjKITks417zzaCe29/g0yMgH7F/y
    118 l3oUCRh+2IhVpNXv9wmRC0wQichbO9l1B7L2M/DPVm4dFF04+IfRVurIyFs72XUHsvYz8I8e
    119 6nd2z9LUGGQPqKgoPaTeyR28P+nXr4Ag2M6SlNObyj2k3snVbgsmbZ34qj5s6s0=
    120
    121 /
    SP2-0640: Not connected
    SQL> show errors
    SP2-0640: Not connected
    SP2-0641: "SHOW ERRORS" requires connection to server
    SQL> CREATE OR REPLACE PUBLIC SYNONYM DBMS_CLR FOR DBMS_CLR;
    SP2-0640: Not connected
    SQL> DECLARE
    2 ORCL_HOME_DIR VARCHAR2(1024);
    3 BEGIN
    4 DBMS_SYSTEM.GET_ENV('ORACLE_HOME', ORCL_HOME_DIR);
    5 EXECUTE IMMEDIATE 'CREATE OR REPLACE DIRECTORY ORACLECLRDIR AS ''' || ORCL_HOME_DIR || '\bin\clr''';
    6 END;
    7 /
    SP2-0640: Not connected
    SQL> show errors
    SP2-0640: Not connected
    SP2-0641: "SHOW ERRORS" requires connection to server
    SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\rdbms\admin\patch\patch_4659228.sql;
    SQL> set echo off
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    ...wwv_flow_help
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0641: "SHOW ERRORS" requires connection to server
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0640: Not connected
    timing for: Load Start
    Elapsed: 00:00:00.00
    SP2-0640: Not connected
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SP2-0640: Not connected
    ====================================
    postScripts.log -- END
    ====================================
    ====================================
    PostDBCreation.log -- START
    ====================================
    SQL> connect "SYS"/"&&sysPassword" as SYSDBA
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> set echo on
    SQL> //create or replace directory DB_BACKUPS as 'C:\oraclexe\app\oracle\flash_recovery_area';
    SP2-0640: Not connected
    SQL> begin
    2      dbms_xdb.sethttpport('8080');
    3      dbms_xdb.setftpport('0');
    4 end;
    5 /
    SP2-0640: Not connected
    SQL> create spfile='C:\oraclexe\app\oracle\product\10.2.0\server\dbs/spfileXE.ora' FROM pfile='C:\oraclexe\app\oracle\product\10.2.0\server\config\scripts\init.ora';
    SP2-0640: Not connected
    SQL> shutdown immediate;
    ORA-24324: service handle not initialized
    ORA-24323: value not allowed
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> connect "SYS"/"&&sysPassword" as SYSDBA
    ERROR:
    ORA-28547: connection to server failed, probable Oracle Net admin error
    SQL> startup ;
    ORA-24324: service handle not initialized
    ORA-01041: internal error. hostdef extension doesn't exist
    SQL> select 'utl_recomp_begin: ' || to_char(sysdate, 'HH:MI:SS') from dual;
    SP2-0640: Not connected
    SQL> execute utl_recomp.recomp_serial();
    SP2-0640: Not connected
    SP2-0641: "EXECUTE" requires connection to server
    SQL> select 'utl_recomp_end: ' || to_char(sysdate, 'HH:MI:SS') from dual;
    SP2-0640: Not connected
    SQL> alter user hr password expire account lock;
    SP2-0640: Not connected
    SQL> alter user ctxsys password expire account lock;
    SP2-0640: Not connected
    SQL> alter user outln password expire account lock;
    SP2-0640: Not connected
    SQL> spool off;
    ====================================
    PostDBCreation.log -- END
    ====================================

    There were no CORE*.LOG files.. So here are the other two..
    ============================
    alert_xe.log START
    ============================
    Dump file c:\oraclexe\app\oracle\admin\xe\bdump\alert_xe.log
    Wed Nov 09 10:52:59 2005
    ORACLE V10.2.0.1.0 - Beta vsnsta=1
    vsnsql=14 vsnxtr=3
    Windows XP Version V5.1 Service Pack 2
    CPU : 1 - type 586
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:596M/1023M, Ph+PgF:2167M/2459M, VA:1936M/2047M
    Wed Nov 09 10:52:59 2005
    Starting ORACLE instance (normal)
    LICENSE_MAX_SESSION = 0
    LICENSE_SESSIONS_WARNING = 0
    Shared memory segment for instance monitoring created
    Picked latch-free SCN scheme 2
    Using LOG_ARCHIVE_DEST_1 parameter default value as C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS
    Autotune of undo retention is turned on.
    IMODE=BR
    ILAT =10
    LICENSE_MAX_USERS = 0
    SYS auditing is disabled
    ksdpec: called for event 13740 prior to event group initialization
    Starting up ORACLE RDBMS Version: 10.2.0.1.0.
    System parameters with non-default values:
    sessions = 49
    sga_target = 285212672
    control_files = C:\ORACLEXE\ORADATA\XE\CONTROL.DBF
    compatible = 10.2.0.1.0
    undo_management = AUTO
    undo_tablespace = UNDO
    remote_login_passwordfile= EXCLUSIVE
    dispatchers = (PROTOCOL=TCP) (SERVICE=XEXDB)
    shared_servers = 4
    local_listener = (ADDRESS=(PROTOCOL=TCP)(HOST=DGAULT.hotsos.com)(PORT=1521))
    job_queue_processes = 4
    audit_file_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\ADUMP
    background_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\BDUMP
    user_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\UDUMP
    core_dump_dest = C:\ORACLEXE\APP\ORACLE\ADMIN\XE\CDUMP
    db_name = XE
    open_cursors = 300
    pga_aggregate_target = 94371840
    PMON started with pid=2, OS id=2948
    PSP0 started with pid=3, OS id=3468
    MMAN started with pid=4, OS id=3600
    DBW0 started with pid=5, OS id=3148
    LGWR started with pid=6, OS id=4028
    CKPT started with pid=7, OS id=2588
    SMON started with pid=8, OS id=3868
    RECO started with pid=9, OS id=124
    CJQ0 started with pid=10, OS id=1892
    MMON started with pid=11, OS id=1732
    Wed Nov 09 10:53:08 2005
    starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
    MMNL started with pid=12, OS id=2344
    Wed Nov 09 10:53:08 2005
    starting up 4 shared server(s) ...
    Oracle Data Guard is not available in this edition of Oracle.
    ============================
    alert_xe.log END
    ============================
    ============================
    xe_ora_3500.trc START (11:04 AM)
    ============================
    Dump file c:\oraclexe\app\oracle\admin\xe\udump\xe_ora_3500.trc
    Wed Nov 09 11:04:54 2005
    ORACLE V10.2.0.1.0 - Beta vsnsta=1
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
    Windows XP Version V5.1 Service Pack 2
    CPU : 1 - type 586
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:598M/1023M, Ph+PgF:1863M/2459M, VA:1617M/2047M
    Instance name: xe
    Redo thread mounted by this instance: 0 <none>
    Oracle process number: 0
    Windows thread id: 3500, image: ORACLE.EXE (SHAD)
    opiino: Attach failed! error=-1 ifvp=0000000
    ============================
    xe_ora_3500.trc END
    ============================
    Message was edited by:
    Doug Gault

  • YAPP (Yet Another Printing Problem)

    I've found another printing problem - this time with colour printing.
    To my
    surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
    using
    NT drivers for the 660C, the printer being connected to a Win95
    machine).
    I can print OK with from my NT develpoment machine in colour, but when
    running
    the same app from the Win95 client with the printer attached locally the
    coloured text disappears. Has anyone else come across this problem?
    Is this another of the 'Printing works fine as long as it happens
    non-locally?'
    features?
    Thanks
    Jamie Anstice
    Programmer/Analyst, University of Canterbury
    New Zealand

    I can print OK with from my NT develpoment machine in colour, but when
    running
    the same app from the Win95 client with the printer attached locally the
    coloured text disappears. Has anyone else come across this problem?Hi Jamie,
    I wonder if this is related to the printing feature I discovered
    where things I print from Forte have a strong tendency to come out in
    the same colours as my windows desktop, which is
    typically yellow-on-black.
    - Ed
    ================================================================================
    Eduard E Havelaar, Information Services Section, University of Canterbury
    email: [email protected]
    phone: +64-3-366 7001 extn 8910
    fax: +64-3-364 2999
    snailmail: Private Bag 4800, Christchurch, New Zealand

  • Another Airport Express problem thread.

    Hi Everyone,
    I got a Powerbook recently and like many on these threads I am beset with Airport Express problems.
    Here's my story. I purchased my Powerbook about a month ago and popped into the Apple Store to ask about the best way to have wireless internet access at home. They recommended the D-Link DSL-300T ADSL modem and Airport Express. I purchased these items and set everything up at home. This didn't work. After a week of talking to Apple, I got the answer to my problem from a Mac message board. Supposedly the ADSL modem recommended by Apple and stocked in their online store wasn't compatible with the lastest version of Airport Express 6.2.0. So I dowgraded the firmware to 6.1.1 and everything worked fine. My next problem was after running an OS X software update which I can presume also updated the Airport Express back to 6.2.0. So again I downgrade to 6.1.1 and it works again. Then I have to get my Powerbook replaced as the refurb Apple sold me didn't have the superdrive in it that Apple advertised, so I transfer my settings and files and i can go online for a couple of days and then it stops working again. I do the downgrade again but this doesn't help. So I take it to see a genius at Apple who performs the AE update 2005-001 which he says will solve the problem of incompatability with 3rd party modems. Take it home, it doesn't work. Powerbook almost gets thrown out of the window.
    Why is something that should be so simple so difficult.
    My questions are does anyone have a D-Link DSL 300T modem that works with the update 2005-001 ???
    Why do Apple recommend an ADSL modem which doesn't work with their products ???
    What ADSL modem for the UK does work with Airport Express ???

    Hi Bollard, not sure whether this would work with the current model of the modem, but I ran into problems with the DSL300+ when first using it wit an airport extreme, back in 2003.
    I eventually resolved the problems by using the modem in bridging mode. Not sure if this would be applicable with the new model, or whether it work if you are needing PPPoA rather than PPPoE, but for what its worth my experiences and solution can be found at http://discussions.apple.com/thread.jspa?messageID=607296&#607296 I've had a fair bit of positive feedback from people who found it worked for them, at least with similar equipment and connection protocol.
    Cheers
    Rod

  • Can anyone help?? Another new MacPro thread....

    Hi all.
    Another person here having big issues with PP CC 2014 on the new MacPro..
    A little background;
    I've been having issues with PP for years. Previously I was a photographer, and Lightroom was my software of choice. That was a great Adobe experience, pretty faultless software really...
    Then when I moved to video it was a different story... obviously it's a whole different ballgame dealing with video files, I've not had much luck with my editing workflow!
    I was working off an underpowered PC first, then was on a few Macbook Pros. Eventually, I got the go ahead to get a new MacPro from my employer, I thought that would solve all my problems! How wrong I was!
    Even after the apparent "fix" for the GPU issues, I'm still having problems...
    I'm no Adobe basher....No one wants PP to work well more than me (Al Mooney got highly offended on Twitter after I suggested PP might be slightly less than perfect!)
    I'm hoping I might get some tips to improve performance or even a fix for the issues I'm having.
    Here's the gist of my specs, can give more if needed;
    Yosemite 10.10.2 (14C109)
    Mac Pro (Late 2013)
    3.5 GHz 6-Core Intel Xeon E5
    64 GB 1866 MHz DDR3 ECC
    AMD FirePro D700 6144 MB
    My main drive is a G RAID 8GB TB2
    So,
    My main issue is that when a sequence gets more complex, the performance dips massively, to the point where it's unusable and crashes constantly.
    The timeline freezes, the playhead is laggy, the system gets really slow to respond in general..... Maybe 15 seconds for the keyboard to respond to keypresses. (or else I need to tap spacebar twice instead of once to get it to respond). If I try to make any change on the timeline that anything more than a simple delete etc, the system can freeze and I need to force quit.
    Another symptom is that when quitting the program, often it doesn't quit properly and I need to force quit.
    The sequences I'm working on don't seem that demanding (especially give the machine I have) so it's really confusing as to what the issue is.
    We're talking videos usually in the 2 -5 minutes range. Maybe 4 video layers. Footage wise; generally 1080p XAVC from a Sony F5, some Canon 4K from a 1DC. Can PP really handle native footage, should I be transcoding??? One of the big benefits of PP is the apparent ability to handle native formats, so it's really disappointing if that's the issue....
    I do use a reasonable amount of plugins, like Izotope for denoising dialogue, the dreaded Red Giant plugins, and occasionally Red Giant Denoiser (is this the root of my problems??!). My current project has two layers keyed interviews (2 angles) and I'm using Ultrakey for that. (I bought Red Giant Primatte Keyer, but my system isn't powerful enough to run it without major issues....ridiculous!!)
    If anyone has any suggestions I'd love to hear them. I've read other threads but my issue seems different. I can't rule out that I'm making some obvious mistake in my workflow either... so any general workflow best practise tips in that regard would be good too.
    Sorry for the long thread and thanks for reading.

    Hi healyb2,
    Sorry you're experiencing this issue.
    I think I've identified one of the issues, Izotope 4 Dialogue Denoiser.....
    I've disabled it on an existing sequence and the crashes have stopped (for now).
    Let us know if these issues crop up again. You can let us know directly here: http://adobe.ly/ReportBug
    So, possibly (like Red Giant) Izotope plugins may not work usably in Premiere Pro....... which really grinds my gears......
    Actually, we work hand in hand with plug-ins developers in the realm of compatibility. Some of these plug-ins companies are quite small so you have to pay close attention to precisely what is supported for the host application. In some cases, it takes some time to catch up to the latest versions.
    why are Adobe not calling out the plugins as not usable? What about the plugin manufacturers themselves? I can't see this being a performance issue on my end...frustrating!
    That's actually up to the plug-ins manufacturers. Please communicate with them accordingly regarding compatibility. Sorry for any confusion this may have brought about.
    Thanks,
    Kevin

  • Another SLOW Lightroom Thread

    Just another thread to document the major issues I'm having with Lightroom 4.
    System: Dell Studio XPS running Windows 7 Home Premium, Intel i7-720QM, 8 GB RAM 1333MHz, 500 GB HD, ATI Radeon 4670 1GB with Wacom Intuos 5
    Working in the Develop module has been completely unacceptable and is costing me hours of editing time and frustrating, which means its costing me money.  Everything from navigating between photos to adjusting slider bars seems to be laggy to put it lightly.  After using the Adjustment Brush, making universal changes is taking forever!  And if I got back to create an additional adjustment with the Adjustment Brush tool, it's almost not even worth it because it is so slow to respond.  Similar to the slow downs after using the Adjustment Brush tool, any changes made after making any adjustments in the Lens Correction tab seem to be super sluggish as well.  Oh top of it all, my computer is running extremely hot when running Lightroom, which ever occured in past versions! 
    I've tried several suggestions that I've seen in forums, such as creating a fresh Catalog and importing the files directly into that new Catalog, hiding the Histogram to free up resources, reducing the size of the Catalog to just the working set I'm currently working on... I've now installed the 4.1 RC and do seem to see some increase in response with the sliders within the develop module, but once I start using the Adjustment Brush and Lens Correction, it seems to be back to it's sluggish self.  And after editing a few photos, the entire program is crawling.
    I think it's great that Adobe has such a strong following that people seem to be so understanding and patient about these issues, but find it unacceptable that such an unpolished release was issued to the public.  If the issues are eventually remedied I will be fully on board with Lightroom, once again, because I do think that the revamped develop module has been a major improvement for editing and workflow, but all those improvements are pretty useless when I'm losing so many hours battling with performance issues.

    No changes, nothing at all, in actual fact I don't even have a PC connected to this broadband line it's purely for the games consoles. I have a separate broadband line for my home office etc.
    Just had a call from BT India, with out wishing to sound derogatory I might as well talk to my pet cat. Apparently they were ringing to see if the problem had been resolved, I only reported it 2 hrs ago.

  • Another iSight Problem

    iSIght will power up then after about a couple seconds will make a shutter sound and then shut off. All equipment and software up to date. My brother in law has had the same problem. In system proflier it recognizes the iSight camera. The only way to try to get to work is to unplug it and then plug it back in. Then the green light will come and then go off after a few seconds following a shutter cover sound. Any suggestions, Thanks, John
    Mac Pro   Mac OS X (10.4.7)  

    Wow, same exact problem. Do these these things happen in waves?
    In any case, my iSight is not recognized as being there, or, in the case of iChat as "in use by another application". If I unplug the camera and plug it back in the green light comes on and there's a small whirring noise then the light goes off and again, the camera is not seen by any of the applications that I normally use with iSight.
    I've restarted my machine; nothing. I have not updated either my OS or QuickTime in a few weeks so that can't be the problem. It's irksome, though, to get one problem with iSight figured out (http://discussions.apple.com/thread.jspa?threadID=557615) only to run into another.
    Dual 2 GHz G5   Mac OS X (10.4.7)  

  • Another Ipod Problem - Purchased Music wont play

    I just recently recieved my fifth repaired Ipod in a year and a halves time, and now I have another problem. I loaded all of my iTunes songs to my iPod, but all of my purchased music will not play, it just skips over them to the next song. What is going on?
    Thank you for your help in advance.

    Could you share this again? I have looked for answers to this issue in multiple threads and have yet to find anything that works. All the latest stuff, resync, etc. and the purchased music still won't play after some interval of time. It plays fine for a while then it just skips through the titles.
    Is it a time thing or something you can set?
    Thx for any insight.

  • Camera being used by another application problem

    Hi there
    Please help, Ive been using ichat with my Panasonic NV-GS17 digital camcorder on Panther for ages with no hassel at all, ichat just found the camera and away I went.
    I recently upgraded to Tiger 10.4.6 now every time I log into ichat it says that the cameras in use by another application. Please help
    I have read some other similar messages about this subject but have still had no joy. I do use Qtime pro 7.0.4 but was using this before I upgraded my system.
    Its driving me mad! any ideas?

    Hi Dano71,
    Welcome To The Apple Discussion Pages.
    Was the camera plugged in when you did the update ?
    If so unplug it for about 15 mins or so.
    Do you have any Quicktimew Plug-ins you have added under Panther ?
    Have you looked at this FAQ http://discussions.apple.com/thread.jspa?threadID=278760 about possible Panther to Tiger iChat problems ?
    8:29 PM Wednesday; June 7, 2006

  • Another X48C problem, yet again

    I read some threads and found that some are having same problem as me, however, my problem is slightly different.
    Thermaltake Toughpower 750watts
    Q9450 C1 with X48c
    1 lg and 1 sony dvd drive
    Seagate barracuda 1/2 terabyte(500gb)
    Powercolour 3870x2
    corsair xms2 DHX 4gb kit
    The problem actually started a few wweeks ago when everything, including the mouse, hangs. However a few weeks ago this problem can be solved by a rebooting
    Yesterday when i rebooted, the fan turns on and off, sometimes it spinturn for merely a second, or it will spin at a very fast speed then slow down, and then turns itself off again
    I tried reseting the cmos a few times(i duno why). I did get into bios and optimised default settings, it hangs after my windows vista loading bar, after another restart it gets into windows, but hangs.
    Now when i push the power button, it just spins for a sec, or for a long time, before offing itself.
    I took out my ram and gpu and put them back again, but still having the same problem
    Is the board dead? anyway to get it to start? i need to use it for more 'demanding work applications'
    ADD ON: I cannnot get into bios, i have seen replies of booting from usb, but i cannot get into bios to set 'boot from removable'
    Thanks in advance

    Try switch off Alimentation cable few minuts (2-3) Do clear CMOS 30sec try again if it don't boot can be damaged bios 

  • Another BORIS MISSING thread.

    Hi,
    I've been looking at several BORIS MISSING threads trying to find a solution, and have not found a good one yet. Here is my problem:
    Originally purchased FCP studio 5.0 in 2005. Noticed Boris was missing (never needed it) about a year ago and never figured out how to get it back (didn't try very hard). Upgraded to 5.1.4 about two weeks ago, and it's still missing. Trashing preferences doesn't help.
    The specifics:
    Boris does not show up under generators in effects tab or in viewer generators popup.
    BorisFX folder is in Application Support as it should be, and all necessary files (as mentioned in other threads) seem to be in place. What's more, if I create another account, BORIS WORKS. But I don't want to login to another account every time I want to use Boris.
    Something I've noticed: I seem to recall that Boris file icons in Application Support>BorisFX were some sort of "Kind: After Effects" Icons prior to my 5.1.4 install (also prior to my recent purchase of Photoshop). Now they are either "Kind: Unix Executable File" or (under BorisFX>Gradient Styles) "Kind: Adobe Photoshop Gradient File". Would this have anything to do with my problem? Anyone have any ideas for me?
    Thanks,
    Matt

    1. Open your system Plugins folder (not your own FCP User Data folder):
    Macintosh Hard Drive/Library/Applications Support/Final Cut Pro System Support/Plugins
    2. Copy these folders to the desktop:
    Text Scrambler.bundle
    Title 3D.bundle
    Title Crawl.bundle
    Vector Shape.bundle
    3. Change the extensions on all four desktop files from bundle to .plugin
    This requires password authentication. They will become blank icons.
    4. Delete the original .bundle folders from the Plugins folder
    7. Move the desktop .plugin files to the Plugins folder
    8. Launch FCP and they should now show up under the "Boris"
    generators category

  • Another Magnetic Case Thread

    So, I see that several people have asked about the cases with magnets causing problems. The resounding answer seems to be no, so I'm looking for some theories on what might be going on with my touch. I got a leather case that has two magnets on the side to keep it closed, instead of the bottom (as most of the threads seem to deal with). I put my touch in there and a few hours later, it wouldn't come on. I had to reset or whatever they call it when you hold down both the power and home buttons. This happened several times. I charged it, did all the "r"s except a complete restore and it seemed to be ok. That was late at night, so I only tested it for a few minutes, then went to bed. The next morning (this past Tuesday), I was trying to use it and kept having similar problems, only now I would sometimes just get a white screen. I took the case off and left it off. It is now late Wednesday night. I have had my touch out of the case with the magnet for about a day and a half and I haven't had one problem. I didn't do anymore resetting, restoring, etc. It just started functioning normally again. I plan to test the case again tomorrow, but wonder if there are any thoughts on what might have happened. I wondered if maybe the magnet near the WiFi was causing problems in it which was affecting my touch. So, thanks for the input and I'll make a note when I finally get it back in the magnetic case!

    AAPL, I saw your response in another thread speaking of how you showed people at college things that magnets did not mess up, but supposedly were supposed to, such as floppy disks, etc. Based on that, I was hoping that you would catch this thread and offer some insight. I'm afraid that I still believe that the magnets are the trouble makers. I know that on the DLO case, the magnets are at the bottom. My case is not the same. The magnets are on the left side at the top and bottom. In addition to my husband putting the case and having the exact same problem, I tried it again. After seeing your response, I put the case back on. FIVE minutes later, I had the exact same problems. iPod wouldn't come on. When it did, I had a flickering screen, then the Apple. I haven't had any trouble with my touch since I took it out of the case Tuesday morning. Now, on Thursday morning, I tried the case again, and voila! Problems. And as soon as I took it out of the case and restarted it, it began functioning as normal. How do you explain that? (That isn't supposed to sound smart alec, but truly curious!) The rest of the case is just leather. I know that isn't causing problems. To me, it is obviously something about the case, so I think that it must be the magnets. Thanks!

  • Yet another iPhone WiFi thread - cannot connect to some OPEN networks

    I make no apologies in starting another thread about iPhone WiFi connectivity. Judging by the number of references to WiFi issues in this forum, as well as on the Internet generally, this is a big issue with many users and yet there seems very little acknowledgement by Apple that there is problem.
    In my case I have a first generation iPhone which works well on most WiFi networks, both open and closed, including my secured network at home, but cannot connect properly with some open networks. I have had this problem while using 1.0, 2.0 and 2.1 firmware.
    Sometimes I get the "Cannot Connect ..." message and sometimes I am able to connect and obtain a good signal and see an IP Address and a Subnet mask, but no Router or DNS address.
    I'll repeat that I talking about open networks, so there is no password issue. In one local cafe, I am unable to connect to a network that I used to be able to connect to routinely. I have talked to the owner, who is another Mac and iPhone user and he assures me that he has not changed any router settings.
    Can anyone offer any suggestions beyond the usual re-setting and re-booting options? Is there something about iPhone MAC addresses or the WiFi signal that certain routers don't like?
    Simon

    This is not a solution to your problems but:
    1- Expecting someone from Apple to respond here is a vain hope. This is a discussion forum for users and you can only expect responses from users. Talk to Apple tech support if you want a response from them.
    2- I saw an item on an iPhone blog page somewhere yesterday saying that Apple was now replacing iPhones with this issue if you took it to an Apple store. Don't know if it's true but it also had a workaround that you could use for your own home network if you were having problems—and I am—and that workaround basically worked for me.
    I turned wi-fi off on the phone and opened Airport Utility on my iMac. I turned wi-fi security OFF and then tried to connect. I actually got a connection straight away, and I noted down the IP addresses and subnet mask data from the DHCP screen in the iPhone's wi-fi network info screen. I then restored wi-fi security on my iMac. Of course that restarts the router and I lost my connection and when it started up again, the IP addresses had changed but the subnet mask had not. I swapped to the Static screen instead of the DHCP screen and edited all 3 IP addresses. That got me my connection back and it has continued to work throughout today. That's the best result I've had so far.
    It seems to me that my iPhone has problems picking up the network data from my home network and I don't know why that is. I was at a friend's last night and tried to connect to his system and it connected straight away. I assume there's something about my settings which is problematic but I don't know what it is but at least now I have a workaround.
    It's possible that something similar is going on for you with the public networks you're having problems with but, unfortunately, the workaround I tried won't work for you in a public network so that's probably not much help.
    You could try taking your phone to an Apple Store and seeing if they exchange it. The blog I read suggested the magic words were "hardware problem". In my case I don't think it's a hardware problem but it may be in yours.

Maybe you are looking for