Another guy with jerky video dragging issues...

I'm a longtime Premiere user but I'm new to Premiere Pro 2.0 so I'm sure that there's a million things I'm doing wrong with this version.
I just finished working on a wedding for a friend and now that I've exported the video and burned it to DVD it appears like the TV can't keep up with the video. If the camera/video is stationary then it's fine. But if the video moves or pans to track something the picture drags badly. The audio is just fine.
The footage came from a Sony PD-150 (I know, I know... non-HD, but a prosumer grade camera... back in the day it was amazing) and a Canon DX20 (HD consumer-grade camera)
My machine is fairly new (upgraded within the last 6 months) but is definitely not a blazing editting machine. I'm also not really in the wedding video business anymore (as I'm sure you can tell by my camera selection) so I'm not really looking to spend a ton of money on hardware solutions.
I'm just looking to figure out if this is something I can fix using what I have. If it's impossible then I'll look for another solution. I'm just such a big fan of Premiere 6 that I figured I'd give Premiere Pro 2.0 a try for those times that a friend would con me into videoing their wedding... that and Premiere 6 seemed to refuse to work with the footage from the Canon, even though it wasn't HD footage (wanted the Sony and Canon footage to look somewhat similar.)
I'm taking a shot at fixing it by just exporting it with a higher FPS, although I know that's a shot in the dark. I'd pull the specs on my computer, but it's currently chugging away and I don't really want to make the 12 hours 40 min 17 seconds that it's got left take any long than necessary.
If you need any piece of information to offer any advice just let me know. And if you want to tell me I'm a noobie or something along those lines then feel free. I've been flamed enough times in enough online forums that it doesn't bother me anymore.
Thanks in advance!

My tests were run with PE4 (up to PE7 now) Projects, and PrPro2 Projects. PrPro2 will Open PE4 Projects, with some glitches. These were involving treatmensts, that did not appear in PrPro2. Still, they Opened. Trying to go the other way did not work. When trying to Open PrPro2 Project files in PE4, I got the error, "This project was created in Premiere Pro 2.0. Use that program to Open this project. What kind of fool are you?" [OK, that last line was added by me, but that was the tone of the message.]
You can go one way (with some limitations), but not the other.
Good luck,
Hunt

Similar Messages

Itunes 7.0.1 still has major problems with jerky video

I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
- Tpetdoctor

I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

Issues with games, video card issue?

Hi,
I have been having issues with games lately. Mostly they are hidden object games from Big Fish, but they start up then minimize, it doesn't crash completely just minimizes, I click on it again and it works for a few seconds and minimizes itself again and again. I am unable to play the games because it keeps minimizing. could this be an issue with my video card? I have attempted updating it but it doesn't seem to help. Any ideas?

Ok OK, Update...
the games work perfectly on my father's HP which runs windows 7...so it definatly is NOT because of not updated stuff....I really dont know what else to do at this point....no suggestions from anyone?!?!?!

Another one with iTune 9.2 issues

So I went to update my iPhone tonight, and received word from iTunes I needed to update to 9.2.1. Okay, easy right? HA! I have spent the last couple of hours trying to make it work, but as I've found here, I'm having issues like so many others.
The installation starts off fine until it gets to the end, then it says:
"The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate patch to a folder containing the installation package'iTunes.msi' in the box below."
I click on the arrow by the box and here are the two directory options:
C:\Local Settings\Application Data\Apple\Apple Software Update\
or
C:\Documents and Settings\All Users\Application Data\Apple Computer\Installer Cache\iTunes 9.0.2.25
I looked in both of the listed options, and there's no iTunes.msi in either. Did a search on my computer and found:
C:\Documents and Settings\All Users\Application data\Apple Computer\Installer Cache\iTunes 9.0.3.15\iTunes.msi
So I click on that pathway, hit OK, and this comes up:
"The file is not a valid installation package for the produce iTunes. try to find the installation package 'iTunes.msi' in a folder from which you can install iTunes."
So I tried the 9.0.2.25 pathway option, and it says that doesn't exist. I look in the folder, and there's every other previous update folder in there, but not 9.0.2.25 at all.
I then try to remove iTunes completely, starting in the Control Panel, and it does the same thing, so I can't remove it that way. I tried the advice on the iTunes Support website, and it didn't work.
Do I have a missing file that I need in order to make this all work? Is it something else? Or is this whole 9.2.1 update screwed?
Any help would be appreciated!
Message was edited by: alimagrog

The fix for years on this error used to be using the Microsoft Installer Cleanup Utility as mentioned in this older thread
http://discussions.apple.com/thread.jspa?threadID=1184144
Unfortunately MS has pulled it from their website. So unless you are lucky enough to have downloaded that tool before it was pulled, you need a new plan.
Other folks have mentioned using a program named Revo Uninstaller with success, to do the same thing the MS tool was doing.
I wonder - can you browse in windows Explorer to this path and just double-click the itunes.msi file?
Don't go through the Apple Software Update, in other words. Run the MSI file directly.
C:\Documents and Settings\All Users\Application data\Apple Computer\Installer Cache\iTunes 9.0.3.15\iTunes.msi

Whats up with the video card issues with Photoshop CC? I am going back to CS6.

Stop messinn up my workflow Adobe! Your upgrades are supposed to work.

Would you care to be more specific or do you really not want any help with a potential problem?

Just another guy with befw11s4/ps3 problems...

Hello. I just picked up a new ps3 120gb. Like many other people, I am having a hell of a time connecting the ps3 to my home network through my befw11s4 v4. I've done some research and have found that there seem to be a lot of different fixes for problems not exactly like mine. Here's the story: when I go through the network setup process on the ps3, enter in all the network info, and try to connect to the network I get a message "access point not detected". The first thing I tried was updating the firmware on the router. That didn't resolve the problem. Next, I switched from 64bit wep encryption to wpa-tkip. That didn't resolve the problem. However, after power cycling all network equipment and the ps3, the ps3 finally found my router SSID (87% signal strength) and a few of my neighbors'. However, after updating the network settings on the ps3, I tried to connect and got a message: "password authentication process timed out, check that passkey is correct". The passkey was correct. Next time I turned on the ps3, it was back to the same old "access point not detected" **bleep**. I tried turning off the SSID broadcast feature on the router, to no avail. Can anyone lay out the exact settings that my router must have to be able to connect to the ps3? Thanks in advance for any advice....
Brian

Did you reset the router after upgrading it's firmware...If not then,reset the router for 5 seconds and reconfigure it from the scratch..Lower down the security mode to WEP,change the Wireless Channel to 11-2.467GHz and reduce the MTU value to 1364 on the router.

Jerky video with N70

Hi,
Just wanted to ask if I'm the only person that is encountering this problem.
Whenever I try capturing a video... The video is jerky but after saving it... It plays fine when I view it.
My friend has the same unit as well as the firmware 5.0616.2.0.3
24-04-06
RM-84
yet when I tried to use his phone it captured fine unlike mine.
"Only two things are infinite, the universe and human stupidity"
Previous phones:5110,3210,6210,5210,7650,6600,3660,7610
Current phones: N70 5.616.2.0.3, Motorola SLVR L7, Motorola V3Maxx

Hello,
I too have this problem with jerky video but mine seems much worse. I tried to switch to the phone memory instead of the card but that just makes things much worse! I have transfered my videos to a computer and it is not just playback on the phone that's jerky so it must be during recording that there's a serious bugg.
I contacted Nokia support about this and asked is there was a update coming but they just replied that I should hand it in to a service place, so I did. After two weeks without my (only) phone, I got it back and all they had done was format and reinstall the same software version. Hurray for Nokia! I remember the tv-ads they ran, depicting the N70 as a kickass video recording phone. Ok ok that's enought complaining... Does anyone have any suggestions? Nokia sure doesn't have a clue.
/Philip

FCE Jerky Video

I've been using FCE for 3 years on the same OS and I just started having a problem with "jerky" video prior to export. I'm using Canon GL2, G5, OSX 10.2.7. Suddenly I'm seeing "jerky" video while viewing playback on both TV monitor and the viewer screen.
I've read most of the discussion topics regarding "jerky" video and nothing has helped.
My FCE is version 1.0.1. Anyone got the anwser I looking for????

Not flickering. It's like a moving window or a bounce in the video. Kinda like someone bumped my tripod - However, it does the same thing with photos.

Oh boy, another P35D3 guy here with a rebooting BIOS issue :(

Bought the following components:
1. MSI P35D3 Board
2. Intel Core 2 Duo 3.0ghz CPU (8400 series I believe)
2. Kingston ValueRAM 2 sticks of 1gb DDR3 Ram
3. NVIDIA 9600GT Video Card.
4. Nspire 750w PS
Originally it was an ATI HD3870 Card, but when I but this thing together it was actually throwing beeping codes, so I exchanged the Video for an Nvidia 9600GT (which seems to have been a bit of a downgrade).
I started experiencing the dreaded reboot problem. Thinking the board was bad, I took the whole PC back to the store, but they could not reproduce the error. Took it back home and it started working fine except for the random time that it does the continual reboot. Started to research on the net like crazy. Seems a ton of guys are having the same issues. From everything I've read I've been able to do the following:
1. Upgrade the BIOS to the latest. I'm actually confused here because I used the Liveupdate feature and it updated my BIOS to v2.5, yet the latest BIOS on the download page is v1.6???
2. Setup the BIOS Settings to PCI=4X, MPS=1.4. Disabled all non necessary devices. Disabled spread spectrum
I still have my RAM at "Enabled by SPD". I don't know what to manually put for settings for my type of RAM. Everytime I try something, it goes into the continuous reboot until I press the reset CMOS button, and I'm using the spec sheet for my RAM.
I'm posting this from another computer, but when I get to mine, I will post the info that I'm currently using.
Has anyone been able to completely eliminate this problem???

Ok, here's the RAM type that I currently have:
KVR1333D3N9K2/2G
2GB (1GB 128M x 64-Bit x 2 pcs.) PC3-10600 CL9 240-Pin DIMM Kit
DESCRIPTION:
ValueRAM's KVR1333D3N9K2/2G is a kit of two 128M x 64-bit 1GB (1024MB) DDR3-1333 CL9 SDRAM (Synchro- nous DRAM) memory modules, based on sixteen 64M x 8-bit DDR3-1333 FBGA components per module. The SPDs are programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. Each 240-pin DIMM uses gold contact fingers and requires +1.5V. The electrical and mechanical specifications are as follows:
JEDEC standard 1.5V ± 0.075V Power Supply VDDQ = 1.5V ± 0.075V
667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS
Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 9(DDR3-1333) 8-bit pre-fetch
Burst Length: 8 (Interleave without any limit, sequential with starting address “000” only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe
Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin
Average Refresh Period 7.8us at lower then TCASE 85°C, 3.9us at 85°C < TCASE . 95°C Asynchronous Reset
1066Mbps CL7 doesn’t have backward compatibility with 800Mbps CL5
Anyone have any ideas what manual memory settings I should try?

Audio is jerky with Quicktime videos

Thanks to Gary Teresi for doing the research and posting the two links below that show QuickTime performing differently.
I noticed that there were no more posts followng his post aside from one that verified that the following information is true. He found two separate streams where the behavior is completely opposite, one with jerky audio and one without. Hard to imagine it's a setting on my computer causing the issue.
Here is an example of a file that only the video plays fine, but the audio is very distorted... (click this week's message)
http://www.kcbt.org/shaping/sermons/audio.htm
But there is another site which when played has no distortion...(select one of the stapler in action movies)
http://www.virtualstapler.com/gallery/paperstapler.asp
I could really use some help answering the following two questions.
1) How can you be sure (aside from formatting the hard drive) that your current QuickTime version has been uninstalled? Is there a registry key that can be removed? I uninstalled and uninstalled, and then installed an earlier version, but it still comes up as the latest version.
2) What are the settings that some have found are the problem creating this issue? Some have said that settings not set appropriately can cause similar issues. Has anyone been able to duplicate this issue by changing settings?

I, too am having the same problem.
One thing that i have tried was to uninstall Itunes and Quicktime and install Quicktime Alternative.
http://www.free-codecs.com/download/QuickTime_Alternative.htm
Once i did that, i went back to a website...
http://www.kcbt.org/shaping/sermons/audio.htm
On the right hand side of the page there is a QT logo with play this weeks message.
When i click on it, it opens and the sound is very distorted, the video is fine, (except in my case i'm having trouble w/ the audio and video being out of sync.)
Any way, i opened the file, let it finish downloading, then i right clicked in the same window and chose to "save as source" or "save as QT file" and save it to my desk top.
i right click on the file and another dialog box comes up asking what i want to open the file with.
After many tries w/ different media players, i finally got the the file to WORK in (of all things!), Windows Media Player!!!
i hope someone would try this also, and let me know, if this works for you.
Thank You,
Gary Teresi

Video Latency Issue On The Mac Book Pro 2.4 With Leopard 10.5.5

Gear: Macbook Pro (early 2008 model) - 2.4gigs cpu 2gigs ram - all the latest updates... no other applications running during the test
Hi folks. Currently I am having a latency issue when trying to record directly into iMovie using the built-in microphone and iSight camera. Basically, the video seems 5 - 7 frames late to the audio. I found that a good way to demonstrate this issue was simply doing a few handclaps as a test.
This is a quick handclap test displaying some video latency during recording with the iSight camera in iMovie 08.
- Just download this link — and import it into iMovie 08 - Here is a link to a zip file that you can import into iMovie 08 - It's 2.5meg - .m4v export - Also it was recorded as standard format and audio midi setup app: audio was set to 44.1:
http://www.brainbeast.com/37/clap-1-large.zip
- Play from beginning. As soon as you hear a clap sound — pause with the space bar - then back up before the clap with the left arrows
- Then click the right arrow several times until you hear the beginning of the clap sound ( This is the audio: start frame)
- Now — you will notice the video still has an open hand. At this point click the right arrow, counting as you go several times until you see the hand close. This is the amount of frames that the video is late to the audio. For me it seems to be an average of about 5-7 frames late.
Unfortunately iMovie 06 nor QuickTime will not scrub audio as you go frame by frame with the arrow keys so you cannot test it there. If you have some other application such as final cut Pro, you could test it with that.
! IF YOU WOULD LIKE TO PERFORM THE TEST YOURSELF:
- Just record a new movie in iMovie 08 - using the built-in mic and i-Sight camera — and see if it is also slightly out of sync
Note: to be as fair as possible — I did a slow handclap ( in order to not challenge the frame rates) - also, in order to get the maximum volume I used an open palm ( clap on the palms with your fingers spread out as you can see I did.)
Please let me know if this latency appears to be the same for you as it does for me.
Q: Is it just my machine or does it happen to you too?
Q: Does anyone know a way around this latency issue?
Q: Does anyone know if Apple is aware of this latency issue?

I am experiencing the same incredibly frustrating problem as well. When I record directly into iMovie
'08, the video lags the audio by a fraction of a second.
I have tried shutting down all other applications and having only iMovie up. Same problem.
I tried recording the video into QuickTime instead of iMovie and experienced the same problem. (Which makes me think it is perhaps a hardware or operating system issue.)
I tried the technique suggested here and on other sites of "double-dragging" the clip from the Events pane into a project (one normal drag and one Shift+Cmd drag) so that I had the audio and video as two separate tracks. After muting the audio on the video track, I then attempted to slide the audio over to sync it with the video, but even down at the 1/2 second zoom setting I didn't seem to have enough granularity to move the audio so that it was exactly in sync with the video. I was wishing I could use the arrow keys or something like that to move the audio just one frame at a time.
All I want to do is record a video directly into iMovie '08 - this would seem to be something trivial to do!

Hi guys, I am using Macbook pro 17" for last 1 year... recently for the last 4-5 monts i am experiencing 2 unusual problems with the videos. first is that when I run videos on full volume it starts giving jerks and break ups.....

hi guys,
2 display/video isssues
1) when videos played with full volume, it starks giving jerks and breaks
2) some times when i play videos it gives glitches althougs the videos are clean when played on another computer.
please let me know and help out guys.

A Question...
How much Free Disc Space do you have on your Hard Drive...?

Safari issues with Tabs, Video, and Java

Hi. I updated to Lion and Safari 5.1 and did all the software updates. I have a MacBook from 2008. For some reason, I am having a lot of issues with Safari. I hope someone knows what I am doing wrong.
1. Every time I open Safari after I turn on my computer or it wakes up from sleep, I have to do an internet test to get the computer to realize I am still connected to my house WiFi.
2. The computer goes to sleep after 30 secs. Can I change this somehow?
3. I cannot open any videos from YouTube or vidoes my friends have posted on Facebook.
4. I used to be able to drag a link over an existing tab and it would automatically go there. Now I have to drag it to the + sign to get it to open. (command click still works)
5. I tried to check my plug-ins to see if that was the problem. I put all of my internet plug-ins in the trash and added them one by one. Safari seemed to work a lot faster, but then as soon as it went to sleep, I had the same issues. Also, I can't find Java anymore (not in my trash, didn't delete anything from the trash) and I did the java test on a website and it's not showing what it's supposed to. All the software updates say it is fine, but obviously it isn't.
I know this is a lot of stuff, and most of it is probably due to me not really understanding how my mac works. I've been looking through the forums to see if anyone else has all of these issues; after an hour and a half of reading discussions, I gave up. Any advice would be really appreciated. Thank you.

So, while waiting for some help, I've been continuing my own research.
3. It turned out that it wasn't Java messing with my videos. I just needed version 10,3,181,34 of Adobe Flash and now all videos are working. Hope that helps if anyone else was having similar issues. Here's the link if you need to find out which version you have: http://www.adobe.com/software/flash/about/
4. It turns out that there are several other discussions regarding people who can't drag and drop links into Tabs on Safari. My solution was to write to Apple to ask if they can put that feature back in.
5. I'm not sure if I am still having Java issues, but so far everything I am needing to upload and watch is fine.
One and two are still annoying, so I'll continue to look for solutions. If anyone has any suggestions, I'd appreciate them. Hope this helps someone as much as it helped me. I don't want to throw my computer against a wall every 5 seconds now.

ITunes having issues with music videos

I recently bought an album with some music videos in it and iTunes is having some issues playing them correctly. The audio is not in sync with the video. Seconly, the audio does not sound correct, it is making a skipping sound as if the audio is from a CD that has a scratch on it.
I know that this issue is with how iTunes is playing it back, because when I play it in another video program it works fine.
Just in case it will help, I am running iTunes 11.1.3.8

Are the videos the right kind of files to play in itunes? If not they need to be converted.
Not sure if I am allowed to mention the software needed to convert so you may have to use google to find that.

Video Streaming Issue with Rolling Audio

I have several flash based lessons that I have created that are being distributed online to several companies.
Each lesson has a video that is played within the lesson through the flvplayback control. The videos were supplied by a third party and some of the videos are encoded at 384K and some are at 568K.
One company that is attempting to view the lessons is seeing the following behavior. The video plays for approximately 20 seconds then suddenly the video drops out and the audio continues to play. With the audio still playing the video scrubber rolls back and attempts to start the video again but all that comes through is the audio track again. Now there are 2 instances of the audio playing with no video. This happens a third time and finally keeps going until all the audio is played out.
The IT staff at the company has showed me a fiddler log that shows the flash player making a connection out to Akamai to retrieve the video and then rolling from port 80 to port 1935 and finally to port 443. This would explain the three audio tracks playing
I have read that the flash player will attempt to gather the stream from the stated rtmp location and then if it encounters an issue with a proxy or firewall it will attempt the other ports.
So I am not sure if there is anything I can do by design or programatically to alleviate this issue. It appears to me that the company attempting to view this video has some kind of bandwidth throttling program in place that is kicking off this behavior in the flash player.
Is it possible to prevent the flash player from making the three attempts? Would a sudden cut of bandwidth prompt the player to attempt to roll to another port if a network load balancing program suddenly kicked in? If it is bandwidth is that why the audio stream continues to play because there is enough bandwidth for the audio track to get through, but not the video?
I have attached a screen shot of the sniffer output so you can see the rolling ports thing.

As it turns out they do not allow traffic over the default rtmp ports. They do have a proxy server in place, but it does allow http tunneling. I had one of the users on their network hit the port testing page that adobe provides and hit laptop passed the test by allowing tunneling.
Incidentally it can be found here if you need it: http://kb2.adobe.com/cps/164/tn_16466.html
I created a flash movie that had the flvplayback component in it streaming from one of the flv files I have on Akamai and it worked for the end user.
This was a little depressing because I was hoping I could simply blame his network and walk away .
I then changed the component in my lesson to specifically use tunneling and this worked for the end user with the video issue, but then caused issues for all the other companies viewing the lessons.
I believe they are using FP version 9.0.124.0 at this particular company and not unlike most places I have dealt with they tell me it is impossible to upgrade to FP10.
So I think what is happening is the scorm communications and the web service communications and the video and the load balancing software and the client side proxy server are all coming together to cause the issue.
It seems to me that it isn't an issue I can solve via changing publish settings or programmatically although I have been looking at the proxyType property of the NCManager for the flvplayback control to see if setting the fallback to CONNECT might solve the issue.

Another guy with jerky video dragging issues...

Similar Messages

Maybe you are looking for