Another HDR Pro Issue (The operation could not be completed.)

HDR Pro worked about three weeks ago. An Adobe update came out maybe a week or two ago that may have broken the functionality of HDR Pro for me.
http://i.imgur.com/LIvpLjn.jpg
I have Googled around quite a bit and not found this particular issue, or a solution crop up. Following several posts on the forum following this format:
Here are some suggestions to work around the issue. In the meantime, we'll work on helping XP-32 & Photoshop play nicely.
Try a different memory setting (65%-ish. Try to give Photoshop ~1G and leave the rest to the system). Restart.
Quit unnecessary applications.
Try quitting Bridge and running Merge to HDR from File > Automate > Merge to HDR
Other things to test out in the Performance Preference panel
          • Try a larger or the largest Tile Size - you've got it set to smallest. Not sure which is better for this case.
          • Try lowering History States to 5. Other, less likely, suspects:
Corrupt prefs: Reset preference file.
Same-named drive: Be sure there is no other directory is named identically to a folder in the Photoshop app path.
Conflict with "Open Documents as Tabs = OFF" Prefrence (Interface) setting.
I can say that it is not an issue with memory, applications, Bridge (not used), too small of a tile size, history state (lowered to 5, increased to 53...), removed and recreated prefs, naming conflict, or a tab issue (tried both on and off). I have tried every permutation under the graphics processor settings. I have even done a 'hard reset' or whatever by ctrl/shift/alt clicking the executable on launch. HDR Pro will not work in the 32-bit version of CS6, either.
Again, HDR Pro worked perfectly on 5/14. Since then the only changes to the system have come from Adobe (whatever was updated recently), and the infamous Patch Tuesday. Even previously-merged images fail to merge now.
Thanks.
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:4 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 3000 MHz
Built-in memory: 12279 MB
Free memory: 3947 MB
Memory available to Photoshop: 10989 MB
Memory used by Photoshop: 65 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Advanced
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 570/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1440, right: 2560
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 570
OpenCL Unavailable
Driver Version: 9.18.13.2018
Driver Date: 20130512000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 2560 x 1440 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 570
Video Card Memory: 1280 MB
Video Rect Texture Size: 16384
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\
Photoshop scratch has async I/O enabled
Scratch volume(s):
M:\, 1.56T, 847.8G free
Required Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Required\
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Required plug-ins:
   HDRMergeUI 13.0

Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

Similar Messages

The operation could not be completed because an error occurred when creating frame 2829 (error -1)

I'm getting this error code in Final Cut Pro. The operation could not be completed because an error occurred when creating frame 2829 (error -1). What does this mean and how can I fix it? This code comes up when exporting.

Final Cut Pro X 10.0.8 and I'm running it on OS X 10.9.1. I have been doing nothing different for the past few months. I have been creating a weekly video and exporting the same way and everything, but it just did this today for the first time. I have never had this error code before.

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it say The Operation could not be completed...The file or directory cannot be found...help.. ?Derek

On my MacBook Pro running )SX 10.9.5 when I go to Contact Sheet II on Photoshop Elements 12 Editor it says The Operation could not be completed...The file or directory cannot be found...help.. ?
Derek

See if this solution works:
https://forums.adobe.com/thread/1623951?q=contact%20sheet

The Operation could not be completed. No other information is available about the problem.

MAC OSX 10.8.5
Processor 2.7 GHz
Memory 4GB1333 MHz DDR3
Logic Pro 9.1.8 (1700.67) 32 BIT
"The Operation could not be completed. No other information is available about the problem."
Uploaded on google drive a series of project files. downloaded them and now the message above is what pops up effectively blocking me from my work. After talking with google support, they confirmed the successful upload and download with no file corruption. All file extensions are the same. Can someone please help.
Sincerely,
Butta Love

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

Hi
And without info - it's near to impossibly to help. Try my general troubleshooting note:
Troubleshooting note
When iMovie doesn't work as intended this can be due to a lot of reasons
iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
problem in iMovie Cache folder - trash Cache.mov and Cache.plist
Creating a new User-Account and log into this
This forces iMovie to create all pref. and cache files new and error free
Event or Project got corrupted - try to make a copy and repair
a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
version miss match of QuickTime Player / iMovie / iDVD
preferences are wrong - Repair Preferences
other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
USB-flash-memories - usually do not work
Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
This You do by
First - close iPhoto
Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
Thirdly - now select all five options presented
THEN - WAIT a long long time (>20 hours are not strange)
free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
Screen must be set to million-colors
Third-party plug-ins doesn't work OK
Run "Cache Out X", clear out all caches and restarts the Mac
Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
(I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
buenrodri wrote
I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
Last resort: Trash all of iMovie and re-install it
Yours Bengt W

Contacts application error: The Operation could not be completed. No other information is available about the problem.

I get about one or two of these error messages, from Contacts each day: "The Operation could not be completed. No other information is available about the problem." It seemed to start after I deleted some of what appeared to me to be the duplicate cards between "On My Mac" and iCloud. I have Contacts version 9.0 in OS X 10.10 Yosemite on a MacBook Pro (15-inch, Early 2011). Anyone else seen this error?

Try the following..
Compress the audio files before uploading them to Google.. using Apple's built in file compressor... (Right/Control click on an audio file and choose compress from the popup menu...
Download from Google and then decompress audio files..
Now test in Logic and see if you get the same issue....

PS CS5 The operation could not be completed. A file system I/O error has occurred

Howdy...
I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
"The operation could not be completed. A file system I/O error has occurred"
Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
HELP!

Hi Guys,
I know this is an old post but I need to bump it.
I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
to liquify or do any other filter work.
I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
Any help would be much appreciated because we are very much in the dark here.
Best regards,
Anders

I cannot get Bridge to open - I get the message that "the operation could not be completed"

I cannot get Bridge to open in my new CS5 Suite - I get the message that "the operation could not be completed." Photoshop comes up fine, but no Bridge. I have a MacBook Pro. Thanks.

I am having the same issue.
MacBook Pro, OSX 10.6.4
Photoshop CS5, Bridge CS5
It will not open, I have reinstalled, cleared the cache, & reset preferences, + installed the patch.
I do have Bridge CS3 that came with my PS Elements, & that works. Do not have any Norton, or other software running.

Streaming error the operation could not be completed

Dear All,
Please Help me i Above Subject Iam using Airtel Digital Tv Application name is pocket tv firts time is install Application is working good after some days showing error streaming error the operation could not be completed please try again later please let me know what is issued and how can fix this problem.

I've continued tests on different films, and tried my entire collection. I've found about two dozen that will play fine on the PC, but will not cooperate when streamed to either Apple TV or my iPad. I tried several more tests with the audio, and that turned out not to be a factor -- I could not replicate that on another test.
I wonder if something in the header of these files is corrupted or a flag is set incorrectly or something along those lines, as the data appears to be fine -- it's just not "handshaking" with my streaming hardware and/or the Apple Home Sharing code that powers it.
Is there any way for me to "scrub" these files and amend their headers, or get into the file and tinker with that info by hand?

Error while consolidating. The operation could not be completed.

Error while consolidating. The operation could not be completed. Cocoa error 13. (null)
Got this when I was trying to consolidate some referenced photoshop files. If failed to create a new version as well when I tried to open the files in Photoshop. I rebuilt the the library and it displays and exports both masters and version just fine, but it won't let me consolidate the master to the library.
What gives?

I think that error was due to the fact that I hadn't upgraded MAC OSX after installing it. I have done that now and now I get another error saying the masters are offline.
I found this old thread: https://discussions.apple.com/thread/1965601?start=0&tstart=0 which seems to be the same problem. This is a whole other topic so I will start a new thread, but leave this in case anyone gets the same problem as me. Upgrade your OSX. That's the solution :-)

IMovie error message "The operation could not be completed"

I am trying to create a new movie and got this error message " The operation could not be completed" after selecting the Themes.
Any suggestions?
Thanks

My problem was because I had moved my Movies folder from the system drive (which is an SSD) over to another drive with a larger capacity. I then created an Alias in my home folder. Turns out this is what was causing the problem. I shoulda known. Some apps absolutely hate this. iMovie, being the dumbed down garbage that it is, simply MUST have it's library in a certain folder, apparently. Would be nice if we had a choice about it.
I find Premiere Elements is actually the better (and friendlier) program. However in this case, I had to slum it with iMovie due to the Quicktime file I was working with.

The operation could not be completed - When attempting to print

I have recently downloaded cutePDF writer in order to print my vbcode into pdfs because my instructor was complaining about how my code looked after copy and pasting it into a word document and then saving as a pdf. after attempting to print several times
i attempted to print to a real printer and that wouldnt work either. i get an error message "The operation could not be completed" and nothing happens. Thanks in advance :).

Hi AaronBootss,
I am afraid that your issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
If you got this issue when you print a pdf document to a real printer, maybe you can contact someone who is familiar with your printer and print operation for help.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The operation could not be completed because there is not enough space on the destination disk

I have 124Gig of space left on my HD, when I try to export my movie i get this error "The operation could not be completed because there is not enough space on the destination disk" I have read some of the threads went in and deleted the iMovie Preference file but no luck.. any Ideas? Thanks!

You need the System DVDs that originally came w/the computer in order to troubleshoot. All Macs prior to & including ML came w/System DVDs.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.

The operation could not be completed because an error occurred when creating frame 19788 (error -1).

When attempting to build a quicktime movie from my video project on final cut pro I got this message "The operation could not be completed because an error occurred when creating frame 19788 (error -1)".

Kathy ...
Better to post your topic in the Final Cut Pro community here.

"The operation could not be completed" Error

Every time i try to open the pixel bender filter I get an error that says "The operation could not be completed" Any Ideas? Windows 7 i5 processor and 8 gb of ram. I tried re installing, and several images from small to max size.
Thanks

Perhaps your issue has been resolved by now. I read all the responses as I was also having the Error:
The operation could not be completed." message and this is how I resolved it. I have Win XP with
3Gb Ram,and the same graphics card you referenced, by Nvidia. I looked as the document size and it was at 370 dpi so I dropped it down to 72 and saved it. Then I had no problem opening Pixel Bender and using the various filters in it.

Another HDR Pro Issue (The operation could not be completed.)

Similar Messages

Maybe you are looking for