Another "horrible performance after upgrading to Lion" post

Hi,
Sorry for yet another "my computer has horrible performance after upgrading to Lion" post. I did search the forum before posting.
I have a relatively new Macbook Pro, 8 GB RAM, 2.8 MHz Intel i7 CPU. I upgraded from Snow Leopard to Lion, then Lion to 10.7.2.
The first time I upgraded, I no longer had my user account, so restored from Time Machine back to SL. After a month or so, I hoped Apple had fixed the bug, so I redownloaded and reinstalled, and this time the upgrade succeeded.
Ever since the upgrade, my MBP runs like a dog. I get the spinning beach ball constantly, across all range of applications, both Apple and 3rd party. Occasionally it doesn't wake up from sleep (close, open lid) and I have to kick it in the head by holding down the power button.
I've tried booting into the recovery partition, running disk utility, and repairing disk and permissions. I've read elsewhere (Google hit) that doing a completely clean install fixes the performance issues (for those users anyway).
I know this is a fairly generic post, but any advice on how to maximize machine performance under Lion, or should I revert to Snow Leopard? Do I really have to wipe the disk, install fresh, restore all non-OS files (don't accidentally wipe a required OS file), then reapply the 10.7.2 maintenance? Yuck.
Thanks,
Scott

try an SMC reset if you are not seeing any weird spikes in Activity Monitor and you've deduced that none of your third party drivers or apps are interfearing with the way lion works.
Resetting the SMC on portables with a battery you should not remove on your own
Note: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
source: http://support.apple.com/kb/ht3964

Similar Messages

Does any one experience having slow performance after upgrading to lion? (I'm using an iMac early 2008 with 4gb memory)

I'm having a problem on my iMac early 2008 (2.4GHz Core 2 Duo 4gb SDRAM) after upgrading to Mac OS X Lion.
The animation such as mission control and full screen and especially, launch pad performs really slow.
Sometimes, mission control doesn't even show the animation.
This is terrible and I want Apple to fix these problems or otherwise this is just making my mac useless.
Does anyone experience having similar problem?

thanks for the reply!
I've checked the activity monitor but nothing was taking up the space expect for Flash Player (Safari Internet plug-in, which takes up 29% of CPU)
here's my screenshot. can you see any problems?
and here's another

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours. Help!

After upgrading to Lion, I went to open Mail and received the message that it needed to upgrade my Mail database - this may take a few minutes. The bar shows it is about 1/5 along and has been there for over 10 hours.
I tried quitting and starting again but it just jumps back to the same spot.

It is quite large, but I have tried two of the fixes suggested and things now seem to be moving along.
(I was unable to seach properly before which is why I posted the question - it was a bit of a panic)

After upgrading to lion, cant use TM

After upgrading to lion, I can't see any TM backups, and I do not have access to this external harddrive.
In the TM backup, I can see all backups, but cant activate or use them.
When I click to the external HD, an error message says: "The folder "" cannot be opend, because you do not have permission..."
I tried to solve problem as Apple given on website, but didnot help.
Thanks for help!

I had this same problem after I copied my TM backups from a 500GB TC to a larger external USB drive.
After some work, I finally was able to get the backups from the old TC to show up (in pink) on the new external drive, but still was unable to select/use the backups in pink.
After readings lots of the pondini posts, I saw some things that seem to get me access to the pink timeline items.
First, I read this post. At the beginning of it, it read...
Time Machine keeps the backups for each Mac separate, and normally only shows the ones for the Mac it's running on, even if there are other Macs' backups on the same disk/partition.
Also, sometimes Time Machine will start a new "sequence" of backups, as if they were from a different Mac.
To see these "other" backups, you need the Browse Other Backup Disks or (Browse Other Time Machine Disks) option. It's available by Alt/Option-clicking the Time Machine icon in your Menubar, or by right-clicking the Time Machine icon in your Dock.
At the end of the post (scroll to the blue box at the bottom), this also gave me an strategy...
If you've moved from a network location to local, Time Machine will usually continue backing up to the sparse bundle. But when you
Enter Time Machine, it will be looking for local backups. You'll have to manually mount the sparse bundle by double-clicking it in the Finder before entering Time Machine, and may need the Browse ... option.
These ideas helped me, as I am now able to access the pink backups in the timeline.

After upgrading to Lion can't get Boot Camp to work! Just get "startup dusk cannot be portioned or restored to a single partition"?

After upgrading to Lion can't get Boot Camp to work! Just get "The startup disk cannot be partitioned or restored to a single partition". Anytone?

This message, and threads like yours got asked daily for over two years, now it is only a couple times a week!!
Is it so hard to follow through? you were to have backup already, clones are best, then erase/format and restore.
Then partition.
Some have been able to use Disk Utility booted from OS X DVD or another drive, and repair the drive.
You have to use Boot Camp Assistant (99.9% anyway) to create and achieve a proper Windows Master Boot Record partition.

Excel 2011 issues after upgrading to Lion

After upgrading to Lion, I cannot open .xls files anymore in Excel for Mac 2011. The files on my own computer work, but files that I receive via email cannot be openend. Does somebody know how to solve this? Thanks. Raymond.

Did that work for you? I was looking at that too, but was discouraged by having to use a sparsebundle given Snow Leopard had such great NAS support.
FYI to everyone else, I upgraded my ReadyNAS firmware to 4.1.8. NetGear indicated the following updates with the nre firmware, but it didn't fix this problem:
     New features and enhancements
     1. Added support for Mac OS X 10.7 “Lion”.
     2. Added warning when NFS access to home shares is enabled.
     3. Added a redirect for http://<host>/ip to https.
     4. Added enhancements to advanced AFP permission settings.
     5. Provide download links for exported users and groups instead of asking for email.
     6. Updated ReadyNAS Remote to the latest revision.
     Bug fixes
     1. Fixed javascript error in FrontView.
     2. Delay auto power-off if backup jobs are still queued.
     Limitations
     1. IE 6 no longer supported.
     2. Drives greater than 2TB are not supported.
I found this link which I thought had some useful information: http://carryflag.blogspot.com/2010/06/imovie-event-library-on-network-drive.html
Some people reported success with the terminal command:
     defaults write -app iMovie allowNV -bool true
But apparantly, after the Lion update, fewer people reported success with it. Still looking though... If anyone else has more symptoms to add, please let me know. I might try to use a sniffer program and see if I can pull a packet capture. That might reveal some info....
On another note, has anyone had any problems connecting to their Time Capsule in the same fashion? I had an idea of connecting a USB Raid Array to it and connecting through the TC, but wanted to know if anyone had any thoughts or experience with that.... Thanks.

ICal event have disappeared after upgrading to Lion. Please help!

After upgrading to Lion, pre-existed calendar events (Newer ones) have disappeared. How can I recover?

Greetings Alex,
If you have a backup of your computer from before you upgraded then you can restore the data from your backup: http://support.apple.com/kb/HT1553
--- Let us know if you have a backup and if so, what type it is and we can tell you how to restore your calendars.
--- If you don't have a backup, consider starting one following the article above ASAP. Anyone with information they care about on their computer should have a backup. It is a hard lesson that every computer user learns at least once.
If you do not have a backup from before you upgraded:
1. Make an iCal backup so you don't lose what you have currently: Click on each calendar on the left hand side of iCal one at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Go to iCal > Quit iCal
3. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical (There may be more than one of these. Remove all files and folders that start with this phrase)
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove all files and folders that start with this phrase.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
---NOTE: To get to "Home > Library" in Lion:
4. Open iCal and see if the events you are looking for magically reappear.
If the events don't appear and you don't have a backup or have the events on another device like an iPhone or iPad then your only other option would be to use data recovery software or a data recovery company to try to get the data back (although it might be easier to just re-create the data as best you can).
Data Recovery software examples:
http://www.prosofteng.com/products/data_rescue.php
http://www.macintosh-data-recovery.com/
http://www.subrosasoft.com/OSXSoftware/index.php?main_page=product_info&products _id=1
You can contact a local Apple Authorized Provider to see if they offer data recovery services: http://www.apple.com/buy/locator/service/
There are many nationwide / worldwide data recovery companies out there. Here are a few examples:
http://www.ontrackdatarecovery.com
http://www.drivesaversdatarecovery.com/
http://www.totalrecall.com/
Hope that helps and best of luck to you.

Back to my mac no longer works after upgrading to Lion

Back to my Mac no longer works after upgrading to Lion
After I upgraded my home machines to Lion, I can no longer access them from my work computer, which is running Snow Leopard. When they were both Snow leopard, it worked fine. How can I get them working again? I don't have control over the OS on my work computer. Is it necessary for me to downgrade all of my home computers to Snow leopard in order to get them talking again?
Additionally the binoculars icon appears in the menu bar all of the time. In previous versions, this would only happen when somebody connected to my machine. Could these problems be related?

OK, so further investigation has addressed the BTMM issue on a remote machine.
With all machines running lion, I was having issues trying to log in to a standard user headless machine already running. In Snow Leopard, I had no issues with this since you can log in via screen sharing using an admin login that's running a standard login. Lion allows multiple accounts to be signed in which is handy since you can now run virtual sessions. This means you can admin the remote computer without bothering the remote user.
The problem was that now logging in using admin login brings up the admin account (which makes sense) instead of the desktop to the standard login. I applied a similar solution to a problem that was related to screen sharing I found on this board. What I believe to be the fix is to add the standard user to the screen sharing user list. Then screen share to the remote account using the standard user credentials.
So on the remote computer, in System Settings->Sharing->Screen Sharing, add the standard user to be allowed access. Previously I only had admins. This may not be an ideal solution for what I'm trying to do since the remote computers primary login is the standard user to be used as a common computer, but it now works so I am happy with it.
Now my only "problem" is my AEBS complaining about my MobileMe credentials, but it doesn't appear to have an impact on BTMM performance so I'll quietly wait for a fix down the road.

Significant slowdown of Time Machine after upgrade to Lion; indexing problem

After upgrading to Lion over the weekend I notice a significant slowdown of Time Machine processing. I assumed the first backup or two would take some time but it's been a couple of days. The process always hangs up at the "Indexing backup" stage. It takes a couple of hours to finish.
I found several threads relating to slowed down backups on Lion, most seem to hang at the "Preparing" stage (not the same symptom) but I did find some good diagnostic pointers. I installed the widget to see what kind of messages were being produced and found a few dozen "Waiting for index to be ready (100)" messages at the end of the stream. Further research - this is not a good thing :-) It seems a couple of such messages can be ok, but this many usually indicates a problem. I'm going to discount the possibility of a hardware failure because everything was perfectly fine up to the point I made the upgrade. Plus the prepare and copy seem to proceed at the expected speed (I watched the most recent cycle just to be sure).
Here is the full message log (it's still running at the moment):
Starting standard backup
Attempting to mount network destination URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
Mounted network destination at mountpoint: /Volumes/Paul DiMarzio's Time Capsul using URL: afp://Paul%[email protected]/Paul%20DiMarzio's%20Tim e%20Capsul
QUICKCHECK ONLY; FILESYSTEM CLEAN
Disk image /Volumes/Paul DiMarzio's Time Capsul/Paul DiMarzio’s MacBook Pro.sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
12.15 GB required (including padding), 490.69 GB available
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
Waiting for index to be ready (100)
I further found the advice and instructions on how to run the disk utility on the sparsebundle. I did a verify and repair, and the results came back that the drive appears to be ok (it did not say that it explicitly repaired anything).
But the problem remains.
I use a 1TB Time Capsule with plenty of free capacity (only half full). The TC and my MacBook are both hardwired into the home network, networking speed has never been an issue.
I'd sure hate to delete the backup file and start from scratch, there's over a year's worth of data there and I have, occassionally, wanted to go in there and pick up a downlevel or subsequently deleted file.
Any advice on other diagnostics or repair options to take? Thanks!
Paul

After posting I decided to keep trying to slog my way through the troubleshooting guide. Some of the steps are beyond my understanding but I did follow the advice in #D2 to delete the .Spotlight-V100 file from the sparsebundle. That action does seem to have done the trick, the backups are now completing in normal time. I ran a couple just to be sure. I've verified the backups with BackupLoupe and entered the Time Machine, all appears to be in order and as expected. The only odd side effect is that the backup volume is no longer ejected after completion but that might just be an artifact of all my mounting/de-mounting and playing with Finder. Anyway a very small price to pay for what looks to be a working system again.
Hopefully the good behavior will last through a few days and a few reboots :-)
ps - if you're reading this and don't know about the troublshooting guide it's here: http://web.me.com/pondini/Time_Machine/Troubleshooting.html (thanks pondini)

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

Arghhhhhhhhhhhhhhhhhhh!!!!!!
After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive. But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
Words, almost, fail me.

HT5502 AFTER UPGRADING TOMOUNTAIN LION SAFARI 6.0 DOESN"T WORK HOW CAN I REPLACE IT OR UPGRADE IT?

AFTER UPGRADING TOMOUNTAIN LION SAFARI 6.0 DOESN"T WORK HOW CAN I REPLACE IT OR UPGRADE IT?

An answer will require more specific information of the problems you are experiencing Mpittas2.
In general, if you installed any third party anti-virus utilities, get rid of them. They can cause problems like this.
There is no need to post your question multiple times. If you don't get an answer right away give it some time, a few hours at least, and please deselect your caps lock key. This will increase the likelihood of receiving competent assistance.
Thanks!

Plug-in failure in safari after upgrading to lion

after upgrading to lion, seems like there is a plug-in issue - not sure if it's in safari or quicktime (i think the former). any idea on how to fix so you can view quicktime videos on web? already tried to reload latest (version 11) adobe flash without success.

This problem just hit me.
I have just spent 3 hours trying every combo of Flash and Java install/uninstall in order to get video on Safari on MBPr with ML. There are various posts on this issues going back thought several OSs.
Flash 10.3 can make it work on Firefox, but that is likely to be a security hazard, acccording to Apple, so was not ideal. I tried everything that I could find on line.
Nothing would make Safari function... then I hit on a simple solution. I keep a clone of my HDD via Carbon Copy Cloner (although Time Machine should work too). I trashed all the /Library/Internet Plugins, and replaced them with those from the clone, which was a couple of days old. I repaired permissions (there were quite a few to do from this), but then... back to normal.
Good luck!

Problems with extrenal drive after upgrade to Lion

Hello,
after upgrading to Lion last week I am experiencing some problems with my LaCie 1 TB FireWire (800) external drive.
The problem is not that big however. When I delete files on the external drive they do not appear in the Trash Bin.
However when I unmount and again mount the partitions using the Disk Utility the deleted files do appear in the
Trash Bin. The external drive has 3 partitions: 2 X Mac OS X Journaled and one FAT. The above described problem
appers on all partitions. I performed repair and verify to all partitions but Disk Utility says that everything is OK! Any idea ?
P.S. With Snow Leopard I have never experienced such problem.
Thank you!

DiskWarrior is on
Step 5: Locating directory date...
Speed reduced by disk malfunction: 339,474, er make that 340,239, er make that 341,327....
should I stop it or keep going??!!!!

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

I have an early 2008 macbook pro that is running slow after upgrading to lion. Is there anything I can do? this is what I have,Processor 2.4 GHz Intel Core 2 Duo, Memory 2 GB 667 MHz DDR2 SDRAM.

First, back up all data immediately, as your boot drive may be failing.
Launch the usual set of applications you use when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the page that opens.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. What approximate values are shown for Reads in/sec and Writes out/sec?
Step 2
You must be logged in as an administrator to carry out this step.
Launch the Console application in the same way as above. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Post the 50 or so most recent messages in the log — the text, please, not a screenshot.
Important: Some personal information, such as your name, may appear in the log. Edit it out before posting.

Cannot eject USB HDD that is being used for Time Machine after upgrading to Lion

After upgrading to Lion from SL, I have had only one issue. Amazing! Great job Apple with making the process smooth, but my issue is this. Ever since the upgrade, I cannot eject the external USB HDD that I use for Time Machine. I get the following error:
The disk "Time Machine" wasn't ejected because one or more programs may be using it. To eject the disk immediately, click the Force Eject button. There is the little spinning fan and the message "Trying to eject" and then the fan disappears and where it said, "To eject the disk immediately..." it now says "You can try to eject the disk again or click Force Eject to eject it immediately." I can click Force Eject and it will work, but seems like there is an issue that needs to be addressed. Any thoughts anyone?

Ok, I think there's a slightly better way, but try this:
Open the Terminal app (in your Applications/Utilities folder). Be very careful with this app. It's a direct link into UNIX, the underpinnings of OSX, but without the protections of OSX.
In Terminal, the prompt looks like this: <Computer Name>:~ <your name>$
(where <your name> is your short user name). It's followed by a non-blinking block cursor.
Copy the following after the prompt:
lsof |grep
and leave a space. Then drag the Backups.backupdb folder on the TM drive from a Finder window into the Terminal window (Terminal will convert that into a "path").
Press Return.
You should get a list of geeky stuff; but the first thing on the next line should be the process that's using the drive (Finder in the sample), followed by another prompt:

Another "horrible performance after upgrading to Lion" post

Similar Messages

Maybe you are looking for