Another "how to create HD DVDs using iMovie" question

I am able to download my  AVCHD footage from my Sony videocam into imovie11 (on my mac mavericks platform)....and am happy enough with using imovie as an editing program for my project.  And when I am done with my "project" imovie delivers to me a MPEG-4 file. It retains HD content (1920X1080p).
My Sony blu-ray player (BDPs350) will not play this file ...(strangely because it plays everything else)... so my question is what is the best (and lowest cost) way to create an avchd dvd of my project which will play in my Blu-ray player (and not suffer much degradation). My Sony PMB software did a great job in the past, but it is not available for Mac. I am on the verge of buying Toast and "hoping" it will work but their customer service was not reassurring when I talked to them recently. Will Toast 11 do the job?

Yes and I said that
Roxio Toast - INCLUDING BD-Component can burn to both DVD and if You got a BD-Burner to Blu-Ray disks.
BUT
DVDs are 4.2-4.7Gb and BD-disks 24Gb (If I remember rigth) - Meaning that You only can put about 20 minutes movie on a SL-DVD.
This BD-DVD - can only be played on Blu-Ray players (no standard DVD-player playback these. Not even Your Mac unless it got a special program that can do this (but to playback true BD-disks a dedicated BD-player is a must)
AND - My BD-DVDs play back greatly on my PlayStation3 - BUT NOT ON some Cheap Samsung BD-players !
Do not know why.
I use:
- Verbatim
- DVD-R
- SLOW BURN speed !
And to me Roxio Toast Bundle was great value - especially Spin-doctor - as I have old vinyls and sounding bad - some sounded as brand new after processing in this. (and lot's more - back-conversion of DVDs, file conversion etc)
Yours Bengt W

Similar Messages

  • How to create a dvd from iMovie '11

    I have created a video in iMovie and am trying to transfer it to a DVD.  However, there is no Export function.  When I share the movie to a file it uses a .mp4 format which is then not able to be be burned to a disc.  In the past, the extension was .mov and I was able to create a DVD without any problems.

    You need iDVD.
    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. i rang Applecare a

    A few months ago, I purchased a new iMac. I recently created a movie using iMovie. Then I found out that iDVD is not included. So I have the problem that I want to burn a movie that I can play on my DVD player and watch on a television. I rang Applecare and was told that I need a program called BURN.
    Is this correct? I can export the movie from iMovie in a m4v format, but I think I need to convert this to iso format before I can burn the disc.
    I know there are programs like TOAST that will do this, but it is expensive.
    I would be very grateful for any assistance.

    Burn will not do what you want, and there is no real substutute for iDVD.
    Why is there no iDVD on my new Mac?
    Apple insists that the entire world has access to fast broadband (and are prepared to pay for the considerable bandwidth usage) and wants to distribute home movies to friends and relatives via download (iCloud, YouTube, Facebook, whatever) rather than mailing them a DVD. The fact that in reality not all users do, has so far had no effect on this policy. If you scream and shout loudly enough down the phone Apple may send you a free copy of iDVD. Stating that they would return their brand new Mac unless they received a copy of iDVD worked for some, but that is now said to have been withdrawn by Apple.
    Also, you can complain bitterly via Apple’s Feedback link, perhaps suggesting that Apple could have provided a choice between burning DVDs and distributing home movies by other means. You may feel that Apple should not dictate how you destribute family videos or photos to distant relatives and friends, and should not assume that every user is prepared to pay for the excessive bandwidth usage charged by ISPs for huge downloads from the App Store:
    http://www.apple.com/feedback/
    Whilst Macs with a Superdrive continue to be able to burn video DVDs, the software for so doing, iDVD, is no longer included in the iLife bundle that came with OS 10.7 Lion (which also omitted iWeb) or that comes with OS 10.8 Mountain Lion. And it is no longer included in the iLife 11 from the online Apple Store: http://www.apple.com/ilife/. Your only solution is to look on Amazon or eBay and try to get an older version that includes iDVD 7, i.e. iLife version 9 onwards. You should also do this if you plan to buy a new Mac anytime soon, as stocks of iLife that include iDVD will not be available for ever.
    However, the vastly more expensive FCPX can burn a DVD without iDVD or DVD Studio Pro involvement, but lack the themes etc of iDVD. Also, of course, there is Roxio Toast, which is the best software for burning anything but again does not offer the flexibility of iDVD.
    And if you think Microsoft are any better, their new Windows 8 operating system will not play DVDs, or burn them, unless customers buy an extra upgrade, the company has announced:  http://www.gizmag.com/windows-8-no-dvd-playback/22443/
    In other words, computer manufacturers have declared optical media as dead, long before consumers are ready to stop using them, which is fine as long as they offered us a choice, but they won’t even do that. Flexibility and intuitive use of a computer seems to be a thing of the past.

  • Hi I have created a movie using iMovie 10.0.6. I cannot save the movie as a complete file to be able to burn on to a dvd.

    Hi I have created a movie using iMovie 10.0.6 on a macbook pro using Yosemite 10. I want to burn this movie to a dvd to use on any dvd player.
    I have "shared" to a file and saved it to a named folder, but it just disappears into thin air. I cannot drag this file into an application because there is no file.
    This is very frustrating, Help.

    iOS: Importing personal photos and videos from iOS devices to your computer
    iOS: Unable to import photos to computer       
    You have a 2G iPod and the can play/sync only SD videos.
    If necessary use a converter app to convert to compatible format. I use the free HandBrake

  • I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?

    I have a MacBook Pro and I created a movie using imovie but once I put the DVD back into my computer it said it was blank! Why?
    Please HELP!!!!

    AFAIK, you can't author a DVD using iMovie - again, AFAIK, you need authoring software such as iDVD or Toast Titanium or something similar.
    Clinton

  • My daughter created a movie using iMovie, which she has worked on for a month, when trying to save it on a jump drive she was asked to "finalize" the movie...now there is no record of it at all. Any ideas how I could try and retrieve the file?

    My daughter created a movie using iMovie 11, which she has worked on for a month. When trying to save it on a jump drive she was asked to "finalize" the movie, and while this was running (quoted 13 hours!) she received an error message. Now there is no record of it at all, I have looked in trash etc. Any ideas how I could try and retrieve the file?

    The file cannot be reloaded in iMovie using File > Open Recent  ??
    There is no trace of the file in a Spotlight search?
    The project files are not under <user>/Movies/iMovie Projects ??
    Finalizing creates small, medium and large version of the finished video. It does take a long time, but it should not destroy your project files.
    Oh, and you really MUST have a backup of your files. You can expect to lose files if you have no other copies of them.

  • How to Create a DVD With No Menu?

    hi there.
    i've had DVD Studio Pro for a while and never used it.
    would it be to hard to give me a step-by-step guidance on how to create a DVD from a QuickTime file in DVD Studio Pro (initially, in the form of a VIDEO_TS folder or IMG file) with no menus at all, so that it's played straight away once inserted into a stand-alone DVD player?
    anyone, please?

    If you are starting in SD and can use compressor, that works better: there are more knobs to twist to adjust the results to your liking. Going from HD to SD, I think compressor or a third party encoder is a must. Just too many things to tweek to get it right for the video you shot.
    AC3 has another advantage in addition to file size: bit rate. There is a limit on what DVD players will handle - usually less than 10mb/s. And if you can have video + audio well under that, you disc will be compatible with more players. If can always put both on the DVD, and use a menu to let a user pick one, but you don't want menus yet, as you said. Many music DVDs do just that: PCM for best fidelity (it is noticeable on a really high end system that most mortals don't have), or DD, even 5.1 for everyone else.
    Encoding: I use 7.5mb/s max for video, and adjust the "average" depending on how big my video is; I've used as low as 4.2 for stage plays and it was not too bad. If you have a short video, you might use CBR (contstant bit rate) at 7.5 for the best quality. I likewise adjust my AC3 bit rate; 192 stereo where I must save space and the original sound quality was not great anyway, up to whatever the max is (384, I think).
    Eddie O

  • Can you publish to a DVD using iMovie for Mac?

    Can you publish to a DVD using iMovie for Mac?  Or can you only share via Facebook etc...?

    For creating standard-conform disks, you'd need a designated DVD-authoring app.
    Options listed in this User Tipp:
    How to create a video-DVD? (Macs without iDVD)

  • How do I import DVD to IMovie? What is the best way to import DVD to a Mac?

    Hi everyone!
    I need some help, so here are my questions.
    How do I import DVD to IMovie? What is the best way to import DVDs to a Mac?
    I would like to keep the original quality from the DVD.
    Thx.

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.

  • How do i burn dvd from iMovie

    How do I burn dvd from iMovie.  iMac has yesomite installed.

    Why is there no iDVD on my new Mac? How do I get it and how do I install it?
    https://discussions.apple.com/docs/DOC-3673
    To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

  • How to create a queue using CVP with ICM script(Comprehensive mode)

    Hello Guys,
    I would like to know how can I configure a queue in a comprehensive mode using micro-app at CVP + ICM environment. I work with UCCE at least 2 years, so I know how to create a queue using UCCX and/or IPIVR (I do a queue application using UCCX Editor and at ICM I use the Run external Script component), but at CVP I don't know how to create a application at Call Studio and how to call this application at ICM Script Editor to run this queue if there aren't agents available.
    Can someone help me to understand how can I do that?
    I attached the ICM Script using micro-app. This script runs ok, I call to a Route pattern and CVP route request ICM, so ICM run the script, but if there are no agents available the call drops, so I would like to know how can I create a queue to hold the call and to come back to a available agent.
    Regards,
    Eric Zapparoli
    Unified Communications
    Wittel

    Out of the check mark in the queue to skill group node you go to another run external script node, then you loop into that over and over again until the call is answered.
    david

  • I have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    have produced DVD using iMovie, now want to download this back to iMovie, will not read DVD, have been told a piece of software available - any chance anybody knows what?

    Handbrake is not ideal for this.
    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://www.apple.com/quicktime/mpeg2/
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion, however MPEG Streamclip still needs it.
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • How to create purchase order using VA01 for BAPI?

    how to create purchase order using VA01 for BAPI?

    Hi Arun,
    Please check this link
    Example Program for BAPI_PO_CREATE1
    Re: BAPI_PO_CREATE1
    Questions in BAPI_PO_CREATE1
    Problem with BAPI_PO_CREATE1
    *& Report BAPI_PO_CREATE *
    REPORT bapi_po_create.
    Input File Declaration
    TYPES: BEGIN OF ty_input_file,
    column1 TYPE char50,
    column2 TYPE char50,
    column3 TYPE char50,
    column4 TYPE char50,
    column5 TYPE char50,
    column6 TYPE char50,
    column7 TYPE char50,
    column8 TYPE char50,
    column9 TYPE char50,
    column10 TYPE char50,
    column11 TYPE char50,
    column12 TYPE char50,
    column13 TYPE char50,
    column14 TYPE char50,
    column15 TYPE char50,
    column16 TYPE char50,
    column17 TYPE char50,
    column18 TYPE char50,
    END OF ty_input_file.
    DATA: i_input_file TYPE STANDARD TABLE OF ty_input_file,
    wa_input_file TYPE ty_input_file.
    CONSTANTS: c_path TYPE char20 VALUE 'C:\',
    c_mask TYPE char9 VALUE ',.,..',
    c_mode TYPE char1 VALUE 'O',
    c_filetype TYPE char10 VALUE 'ASC',
    c_x TYPE char01 VALUE 'X'.
    PARAMETERS : p_fname LIKE rlgrap-filename.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_fname.
    Browse Presentation Server
    PERFORM f4_presentation_file.
    START-OF-SELECTION..
    Read presentation server file
    PERFORM f1003_upload_file.
    IF NOT i_input_file[] IS INITIAL.
    PERFORM split_data.
    ENDIF.
    *& Form f4_presentation_file
    *& F4 Help for presentation server
    FORM f4_presentation_file .
    CALL FUNCTION 'WS_FILENAME_GET'
    EXPORTING
    def_path = c_path
    mask = c_mask
    mode = c_mode
    title = text-001
    IMPORTING
    filename = p_fname
    EXCEPTIONS
    inv_winsys = 1
    no_batch = 2
    selection_cancel = 3
    selection_error = 4
    OTHERS = 5.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    ENDFORM. " f4_presentation_file
    *& Form f1003_upload_file
    *& Upload File
    FORM f1003_upload_file .
    DATA: lcl_filename TYPE string.
    lcl_filename = p_fname.
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename = lcl_filename
    filetype = c_filetype
    has_field_separator = c_x
    TABLES
    data_tab = i_input_file
    EXCEPTIONS
    file_open_error = 1
    file_read_error = 2
    no_batch = 3
    gui_refuse_filetransfer = 4
    invalid_type = 5
    no_authority = 6
    unknown_error = 7
    bad_data_format = 8
    header_not_allowed = 9
    separator_not_allowed = 10
    header_too_long = 11
    unknown_dp_error = 12
    access_denied = 13
    dp_out_of_memory = 14
    disk_full = 15
    dp_timeout = 16
    OTHERS = 17.
    IF sy-subrc 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    EXIT.
    ENDIF.
    ENDFORM. " f1003_upload_file
    *& Form split_data
    Collect data for creating Purchase Order
    FORM split_data .
    DATA: i_poitem TYPE STANDARD TABLE OF bapimepoitem,
    i_poitemx TYPE STANDARD TABLE OF bapimepoitemx,
    i_poitem_sch TYPE STANDARD TABLE OF bapimeposchedule,
    i_poitem_schx TYPE STANDARD TABLE OF bapimeposchedulx,
    i_acct_*** TYPE STANDARD TABLE OF bapimepoaccount,
    i_acct_assx TYPE STANDARD TABLE OF bapimepoaccountx,
    i_services TYPE STANDARD TABLE OF bapiesllc ,
    i_srvacc TYPE STANDARD TABLE OF bapiesklc,
    i_return TYPE STANDARD TABLE OF bapiret2,
    wa_header TYPE bapimepoheader,
    wa_headerx TYPE bapimepoheaderx,
    wa_poitem TYPE bapimepoitem,
    wa_poitemx TYPE bapimepoitemx,
    wa_poitem_sch TYPE bapimeposchedule,
    wa_poitem_schx TYPE bapimeposchedulx,
    wa_acct_*** TYPE bapimepoaccount,
    wa_acct_assx TYPE bapimepoaccountx,
    wa_services TYPE bapiesllc,
    wa_srvacc TYPE bapiesklc,
    wa_return TYPE bapiret2,
    ws_po TYPE bapimepoheader-po_number.
    break gbpra8.
    wa_services-pckg_no = 10.
    wa_services-line_no = 1.
    wa_services-outl_no = '0'.
    wa_services-outl_ind = c_x.
    wa_services-subpckg_no = 20.
    APPEND wa_services TO i_services.
    wa_srvacc-pckg_no = 10.
    wa_srvacc-line_no = 1.
    wa_srvacc-serno_line = 01.
    wa_srvacc-serial_no = 01.
    wa_srvacc-percentage = 100.
    APPEND wa_srvacc TO i_srvacc.
    LOOP AT i_input_file INTO wa_input_file.
    IF wa_input_file-column2 EQ 'HD'.
    wa_header-doc_type = wa_input_file-column3.
    wa_header-creat_date = sy-datum.
    wa_header-created_by = sy-uname.
    wa_header-vendor = wa_input_file-column4.
    PERFORM conversion_output USING wa_header-vendor
    CHANGING wa_header-vendor.
    wa_header-comp_code = 'DE03'.
    wa_header-purch_org = 'DE03'.
    wa_header-pur_group = 'DE1'.
    wa_header-vper_start = wa_input_file-column9.
    wa_header-vper_end = wa_input_file-column10.
    wa_headerx-comp_code = c_x.
    wa_headerx-doc_type = c_x.
    wa_headerx-creat_date = c_x.
    wa_headerx-created_by = c_x.
    wa_headerx-vendor = c_x.
    wa_headerx-purch_org = c_x.
    wa_headerx-pur_group = c_x.
    wa_headerx-vper_start = c_x.
    wa_headerx-vper_end = c_x.
    ENDIF.
    IF wa_input_file-column2 EQ 'IT'.
    wa_poitem-po_item = wa_input_file-column3.
    wa_poitem-short_text = wa_input_file-column6.
    wa_poitem-plant = wa_input_file-column8.
    wa_poitem-quantity = '1'.
    wa_poitem-tax_code = 'V0'.
    wa_poitem-item_cat = 'D'.
    wa_poitem-acctasscat = 'K'.
    wa_poitem-matl_group = wa_input_file-column7.
    wa_poitem-pckg_no = '10'.
    APPEND wa_poitem TO i_poitem .
    wa_poitemx-po_item = wa_input_file-column3.
    wa_poitemx-po_itemx = c_x.
    wa_poitemx-short_text = c_x.
    wa_poitemx-plant = c_x.
    wa_poitemx-quantity = c_x.
    wa_poitemx-tax_code = c_x.
    wa_poitemx-item_cat = c_x.
    wa_poitemx-acctasscat = c_x.
    wa_poitemx-matl_group = c_x.
    wa_poitemx-pckg_no = c_x.
    APPEND wa_poitemx TO i_poitemx.
    wa_poitem_sch-po_item = wa_input_file-column3.
    wa_poitem_sch-delivery_date = sy-datum.
    APPEND wa_poitem_sch TO i_poitem_sch.
    wa_poitem_schx-po_item = wa_input_file-column3.
    wa_poitem_schx-po_itemx = c_x.
    wa_poitem_schx-delivery_date = c_x.
    APPEND wa_poitem_schx TO i_poitem_schx.
    wa_acct_***-po_item = 10.
    wa_acct_***-serial_no = 01.
    wa_acct_***-gl_account = '0006360100'.
    wa_acct_***-co_area = '1000'.
    wa_acct_***-costcenter = 'KC010000'.
    APPEND wa_acct_*** TO i_acct_***.
    wa_acct_***-po_item = 10.
    wa_acct_***-serial_no = 02.
    wa_acct_***-gl_account = '0006360100'.
    wa_acct_***-co_area = '1000'.
    wa_acct_***-costcenter = 'KC010000'.
    APPEND wa_acct_*** TO i_acct_***.
    wa_acct_assx-po_item = 10.
    wa_acct_assx-serial_no = 01.
    wa_acct_assx-po_itemx = c_x.
    wa_acct_assx-serial_nox = c_x.
    wa_acct_assx-gl_account = c_x.
    wa_acct_assx-co_area = c_x.
    wa_acct_assx-costcenter = c_x.
    APPEND wa_acct_assx TO i_acct_assx.
    wa_acct_assx-po_item = 10.
    wa_acct_assx-serial_no = 02.
    wa_acct_assx-po_itemx = c_x.
    wa_acct_assx-serial_nox = c_x.
    wa_acct_assx-gl_account = c_x.
    wa_acct_assx-co_area = c_x.
    wa_acct_assx-costcenter = c_x.
    APPEND wa_acct_assx TO i_acct_assx.
    wa_services-pckg_no = 20.
    wa_services-line_no = 2.
    wa_services-service = wa_input_file-column9.
    wa_services-quantity = '100'.
    wa_services-gr_price = '100'.
    wa_services-userf1_txt = wa_input_file-column13.
    APPEND wa_services TO i_services.
    wa_srvacc-pckg_no = 20.
    wa_srvacc-line_no = 1.
    wa_srvacc-serno_line = 02.
    wa_srvacc-serial_no = 02.
    wa_srvacc-percentage = 100.
    APPEND wa_srvacc TO i_srvacc.
    ENDIF.
    ENDLOOP.
    CALL FUNCTION 'BAPI_PO_CREATE1'
    EXPORTING
    poheader = wa_header
    poheaderx = wa_headerx
    POADDRVENDOR =
    TESTRUN =
    MEMORY_UNCOMPLETE =
    MEMORY_COMPLETE =
    POEXPIMPHEADER =
    POEXPIMPHEADERX =
    VERSIONS =
    NO_MESSAGING =
    NO_MESSAGE_REQ =
    NO_AUTHORITY =
    NO_PRICE_FROM_PO =
    IMPORTING
    exppurchaseorder = ws_po
    EXPHEADER =
    EXPPOEXPIMPHEADER =
    TABLES
    return = i_return
    poitem = i_poitem
    poitemx = i_poitemx
    POADDRDELIVERY =
    poschedule = i_poitem_sch
    poschedulex = i_poitem_schx
    poaccount = i_acct_***
    POACCOUNTPROFITSEGMENT =
    poaccountx = i_acct_assx
    POCONDHEADER =
    POCONDHEADERX =
    POCOND =
    POCONDX =
    POLIMITS =
    POCONTRACTLIMITS =
    poservices = i_services
    posrvaccessvalues = i_srvacc
    POSERVICESTEXT =
    EXTENSIONIN =
    EXTENSIONOUT =
    POEXPIMPITEM =
    POEXPIMPITEMX =
    POTEXTHEADER =
    POTEXTITEM =
    ALLVERSIONS =
    POPARTNER =
    break gbpra8.
    LOOP AT i_return INTO wa_return.
    ENDLOOP.
    ENDFORM. " split_data
    *& Form conversion_output
    Conversion exit input
    FORM conversion_output USING p_ip
    CHANGING p_op.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
    EXPORTING
    input = p_ip
    IMPORTING
    output = p_op.
    ENDFORM. " conversion_output
    Best regards,
    raam

  • How to Create Shared Storage using VM-Server 2.1 Red Hat Enterprise Linux 5

    Thanks in advance.
    Describe in sequence how to create shared storage for a two guest/node Red Hat Linux Enterprise using Oracle 2.1 VM Server on Red Hat Linux Enterprise 5 using command line or appropriate interface.
    How to create Shared Storage using Oracle 2.1 VM Server?
    How to configure Network for two node cluster (oracle clusterware)?

    Hi Suresh Kumar,
    Oracle Application Server 10g Release 2, Patch Set 3 (10.1.2.3) is required to be fully certified on OEL 5.x or RHEL 5.x.
    Oracle Application Server 10g Release 2 10.1.2.0.0 or 10.1.2.0.1 versions are not supported with Oracle Enterprise Linux (OEL) 5.0 or Red Hat Enterprise Linux (RHEL) 5.0. It is recommended that version 10.1.2.0.2 be obtained and installed.
    Which implies Oracle AS 10.1.2.x is some what certified on RHEL 5.x
    I think it would be better if you get in touch with Oracle Support regarding this .
    Sorry , I am not aware of any document on migration from Sun Solaris to RH Linux 5.2 .
    Thanks,
    Sutirtha

  • How to create an array using reflection.

    How to create an array using reflection.
    I want to achive something like this,Object o;
    o = (Object)(new TestClass[10]);but by use of reflection.
    To create a single object is simple:Object o;
    o = Class.forName("TestClass").newInstance();But how do I create an array of objects, when the class of objects is known only by name? (Can't use Object[] because even though an Object[] array can be filled with "TestClass" elements only, it Cannot be casted to a TestClass[] array)
    Anybody knows?":-)
    Ragnvald Barth
    Software enigneer

    Found it!
    the java.lang.reflect.Array class solves it!
    Yes !!!

Maybe you are looking for