Another IOS App thread

I am totally baffled by this. Having major issues connecting to RDS remotely over 3G with i devices.
Equipment:
iPhone (latest IOS) with RDS Client version 8.1.5.141028.1.0
RDS 2 Session hosts, 1 Gateway and 1 Connection broker. All on 2008R2.
Issue: The app is configured with "Add Remote Resource Feed" - Exact URL of webfeed (including Caps) and my domain username and password added. The "Enterprise Remote Access" apps display as expected. Over Wifi they open
fine. Over 3G I get Initiating Remote Connection" followed by "We couldn't connect to the remote PC. Make sure......."
I decided to check if it was firewall related so tested with a non domain Windows computer in a remote location via rdweb. This worked fine.
Am I configuring the RDS app correctly? Should I have to add a gateway in as well?

Hi,
Please give try installing latest version of MRD IOS v8.1.6, which just release yesterday and check result.
What's New in Version 8.1.6
https://itunes.apple.com/in/app/microsoft-remote-desktop/id714464092?mt=8
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Similar Messages

Is it possible to transfer an iOs App from an dev account to another one?

Is it possible to transfer an iOs App from an dev account to another one?

'transfers' have to take place outside of the store between the two parties....app comes out/goes away....moves to new home....goes back into the store as a new app with no connection to before.

I lost my iphone 5,I have Find my Iphone app, but dont have another IOS device..Help

I lost my iPhone 5, I have "Find my Iphone" app , but dont have another IOS device to use to find it..help

if you have activate FIND MY IPHONE on icloud set up , you can try to locate it by accessing to
www.icloud.com
sign in with your apple id and press option find my iphone
note : iphone must have the correct seerting on icloud , must be turned on , and connected to internet or else you can't locate it

Can I use my 3G iPhone as iTunes server while using the free remote app from another iOS device

Can I use my 3G iPhone as iTunes server and use the remote app
with another iOS device

You should be able to set up numerous IMAP accounts on your iPhone with no problems.
IMAP will not sync contacts and calendars in your local copy of Outlook.

With iCloud, do we need to store ios apps on our desktops anymore?

Now that everything is stored in iCloud, our iOS devices sync wirelessly, is there any need for ios apps to continue to be stored on our desktops? Why would iTunes on my Mac need to continue downloading the latest iOS app updates when I already updated my iOS device directly? I notice that when I update apps on my iPhone for example, they are also downloaded to iTunes on my Mac (even though I no longer plug my iPhone in to sync with it).
I know I can turn off "automatic downloads" for apps in iTunes, but what about all the apps that have already been downloaded? Can they be deleted to save space on my desktop?

I'll answer my own thread with another thread that had a great response. Hope this helps someone!
https://discussions.apple.com/message/16731608#16731608

Important: A Mac is required to produce iOS apps for the Apple App Store

Another user asked if a Mac was required. This is a sufficiently important topic, and I'm repeating my answer here for that reason.
My equipment in this world: a Windows 7 PC and an iPod Touch 4. So, I asked myself the same question.
I read iOS Development With Flash, by Dolce (Visual Blueprint publishing). The book is about a year old, so some screenshots are out-of-date, because Apple changed things since the publishing. The book is excellent, though. It walks you through the entire process of creating an iOS app, especially for Windows users.
Here's the bottom line:
- Using Windows, you can do the development using Flash CS5.5.
- Using Windows,you can generate the certificates, provisioning files, etc. (it's not simple, but it's not hard).
- You have to have an iPhone, iPod Touch, or iPad to test your app on.
- Using Windows, you can use iTunes to transfer your app file from your PC to your device for testing.
- Using Windows, you can use iTunesConnect (the website that lets you specify all your app details to Apple for their App Store).
- YOU CANNOT UPLOAD YOUR APP FILE TO THE APP STORE WITHOUT A MAC!!!
Previously, Apple allowed you to upload your app using iTunesConnect, the website. THEY REMOVED THAT CAPABILITY.
Now, you must use Apple's Application Uploader (or whatever it's called) to upload your app file to the App Store (and, remember that Apple has to approve your app before they put it on their App Store).
The only way to get the Application Uploader, if I understand correctly, is to install the Apple Developer SDK. And, you can only install that SDK on a Mac.
So, this seems to be the last-ditch effort by Apple to force you to have a Mac to send your final app file to them for review and hopeful publishing on the the App Store.
If anyone knows otherwise, please correct this info.

In my previous thread you said
I didn't mean the P12 file that Flash uses. There are developer and distribution certificates that get installed into Keychain Access on the Mac, that the various developer tools can directly read. My suspicion is that Application Loader reads those, as part of the process of seeing if you're entitled to be uploading anything to that account.
Is there any clarification on this? Because in this guide it seems to suggest doing the signing up on the PC, and then using something called openSSL, also at the bottom there is a comment which says...
Just a note that it’s possible that this tutorial needs to be updated to accomodate new requirements from Apple. I was able to gain access to a Mac and I can now install the test app just fine. I followed this tutorial word for word once then again from scratch and was never able to successfully install the app to my iPhone. I did notice that if I pull a certificate generated this way into Apple Keychain the option to export a key is not there. So that’s likely where the problem lies.
So at a very rough (I'm new to AIR and iOS) guess I'm thinking sign up on the Mac, test on the iPhone via itunes again on the mac, and when the game is done, submit via the mac, but I can develop via the Flash CS5.5/AIR/Windows and create the necessary files which I will then have to port across to the Mac for any kind of submission/testing (on an actual device) ??

Can I use iCloud storage for iOS apps?

Hello,
I'm trying to work out if it's possible to use iCloud to save/load data across devices with iOS apps created using Air.
I know there is a lot of talk about now meeting the Apple data storage guidelines eg http://www.saumitrabhave.com/2011/11/air-ios-solving-apps-must-follow-ios.html
What I can't understand is if I actually want to use iCloud to save data a user has created in my app (ie condition 1 of the storage guidelines - user generated data, cannot be re-created by application).
If I was to save this user data to the <Application>/Documents directory...
a) would it be backed up by iCloud and meet Apples requirements?
b) if my application was installed on another device is there any way, using Air/AS3, to know that a file has been updated and read the file?
Please let me know if this doesn't make sense... still trying to get my head around how it all works.
Thanks.

More details are available at http://blogs.adobe.com/airodynamics/2012/03/05/app-compliance-with-apple-data-storage-guid elines/

HP ePrint iOS app no longer finds Photosmart C4780 after app update

I have an HP Photosmart C4780 connected through WiFi to my network but sadly it's not supported by AirPrint on iDevices.
So, I was using HP ePrint Home & Biz iOS app (version 4.1) which was very useful for me as it found the printer and allowed me to print from my iPad/iPhone.
Today I updated the app on my iPhone to version 5 (now simply named "HP ePrint" on the App Store) and after the update, the new version doesn't find my Photosmart C4780 anymore. I did the Activation thing on the iPhone, as it was requested to refresh the list of printer on my network in the All tab, but after Refresh no printer is found.
Still I have the old 4.1 on my iPad (and hopefully in my iTunes library) and the printer is located, I assume, through mDSN as it shows the name specified for this setting.
So, question is: Did you dropped support for Photosmart C4780 on 5.0 release of HP ePrint iOS app? If so, why did't you informed this appropriately on the app update text description in the App Store? A message like "some printers may not be supported anymore" would have been helpul.
If HP ePrint should find Photosmart C4700 series printers and this is an issue, how should we proceed from here?
Thanks.

WilliamBPS,
I was not informed that support was removed from the app for certain printers. It may have been lost in the transition to the new updated app. I will deffinitly pass this information along as it is very important that the app supports as many printers as it can. I'll go ahead and take note of your printer model. If I find anything out about this, I'll try to give you an update in this thread.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

I want to be able to use airplay to stream audio to another iOS device, and then use that audio stream to be used when recording video instead of the built in microphone / microphone input. Is this possible?

A third-party app probably cannot obtain a stream from another app. To the best of my knowledge, such a capability is not provided in the software development kit, apps being "sandboxed" from each other and so allowed to communicate only in very specific and limited ways.
I'm not completely sure what you mean by "limitations on video capture". An iPhone, to the best of my knowledge, can natively record video only through it's built-in camera, and audio while doing video recording only through the built-in microphone or mic/headphone jack. There might be a video recording app that would allow audio input from an external device connected to the dock connector, but I'm not sure.
Regards.

Use your own iOS app on your own iOS device without buying a developer program.

This is no question; it is simply a request that you make it possible for people with the free developer program to use their own iOS apps that they built themselves without having to pay $99 a year.
This is because loads of people want to build small apps for themselves, and can do so easily now that Xcode is free on the AppStore. The main problem with this is that they have to pay to simply do this.
So this is in a way a petition for all you people who are the same; who have written your own iOS apps for your personal use only, apps that shall not be distributed and only serve to show what you can do or help a family game to get Apple to make this small thing possible for you (us).
So please post here if you want the same.
Thank you.

As always, feel free to use Report a Bug for any samples, doc additions, feature requests or enhancements you'd like to see as well. Add your BR# to this thread for reference, thanks.
But I wouldn't hold my breath on this one....it would only result in immediate scams.

Can no longer return to iOS app in AIR 4.0 Beta

Is it me or is it no longer possible to return to an iOS app in AIR 4.0 beta? An app I just compiled restarts every time you launch it. No such problem in AIR 3.9.

Just yesterday I saw a problem where going to the home screen and back would either crash the app or would leave it in a frozen state. It only happened if by that time I had been via a part of the app that played an animation that used stream audio.
Might you be seeing the same kind of thing, where you can go in and out of your first screen, but get crashes or hangs when going from another screen?
I didn’t log a bug yet because it’s a hard problem to narrow down, because the crashing happens when you return to the app, and so doing a debug session won’t help, the session closes when you go to the home screen.

IOS App 8.1.5 Remote Desktop can't connect to Windows 7 Pro after upgrade. Error 0x00000507

Nothing has changed between my network, Windows 7 computer or my iPad besides the upgrade of the ios app software to 8.1.5. Did not used to have any issues connecting but now when I try to connect, I get the above error when logging in.
I have tried reinstalling the ios app with no success and also confirmed I can still remote desktop to the PC from another PC with the credentials I've always been using.
I've also tried explicitly including the domain when entering the username with no luck. Looked through my Windows 7 event logs and can't find any more information on what this error means.
Has anyone seen anything similar or have any ideas what I can do to troubleshoot? Thanks!

Hi,
I have a same problem.
Although RD Client 8.1.4 worked great, now I cannot connect to Windows 7 Professional computer from my iPhone 5 (iOS 6.1.4) since the latest update.
Same as Twiggles, when I try to log in (just after entering username and password), the app gives me error code 0x507 "Disconnected from server".
Note that I connect to my PC over VPN using Cisco AnyConnect app.
After that, I've tried to connect to my PC in two different ways with same network settings as the above situation.
1. Use different remote app
I've tested free version of "PocketCloud" from Dell Wyse, and I CAN connect to my PC.
2. Use different version of iOS
I've tested the latest RD Client 8.1.5 on my another iPhone (5s) with iOS 8.1, and I CAN connect to my PC.
Therefore, I assume our 0x507 is not setting related, but probably some sort of iOS version dependent problem arise from the latest update.
Even though I tried PocketCloud, I believe RD Client is the BEST app for remote desktop for iOS.
I strongly hope this problem will be solved!
Thanks.

How do I localize Flash CS5.5 iOS app to one language

What method or process do I use to set an iOS app to only one language?
I recently had an iPad app written in Flash CS5.5 approved at the iTunes app store. I noticed at the iTunes store, it indicates that my app is localized in 14 different languages. I never set this up; it seems that there is a process that automatically adds several default language localizations to the ipa binary when the file is published. I tried the strings panel, used a var to set the localID, went into the SDK for flex and flash builder and deleted the locales (could not find anything similar for Flash itself), but none of this seems to prevent Flash from adding the language defaults. I have found many examples on how to localize my app for several languages, but nothing on how to set it to only one.
Thanks much, Jon

Well, I followed the iOS language list in iTunes thread in this forum and was able to get rid of them all. I have to say that not any single reply in the thread was exactly right. It took a combination of Saumitra Bhave's and spinlight's replies and mass of trial and error to get it all to work. Even the App loader utility came up as obsolete! I have uploaded the updated binary to Apple and am awaiting their approval. The biggest issue is the placement of and actual coding in the entitlements plist; spinlight had the right idea, but, at least in my case, was coded out a bit different. Also, it was not exactly apparent that you had to use the teminal untility to recodesign the app after tearing it apart. Thank the heavens I have a least a basic understanding of how things work on the Mac and was able to puzzle it out. If Apple approves the app and all things look good, I will follow up here with what I did. Of course, if Adobe would kill this bug with a giant can of bug spray, this crazy work around wouldn't be needed...
Thanks much, Jon

AIR iOS app fails uploading to Apple (iTunes Connect)

I've been trying to upload my iOS app to iTunes Connect via Application Loader but it fails every single time. I'm getting the following error(s);
'Unable to run the lipo command: ... Can't map input file ...' and 'Application failed codesign verification'
I believe the second error is due to the first, but I'm not sure. I've been looking around the web for solutions and only found this thread on here, I've tried everything said there but nothing helps.
Replacing my game with an empty FLA doesn't seem to work either.

I'm on the latter side, usually it's a codesigning issue. How did you develop your certs and did you follow the order specifically in my list in that post? Often people use old certs but create a new app ID and expect the old certs to work.
There's been other discussions about extra "files" that Flash Pro inserts into IPAs (.zips in disguise). Because Flash Pro publishes to a folder that's not built specifically for that build, people sometimes copy extra files into that path. Those files can "automatically" and accidentally be added to the IPA without the author desiring that. You should check what files are being packaged with your IPA to verify there's no extra junk.
Are you using flash CS5.5 or CS6 and what version of AIR are you overlayed to?

Need Help testing iOS app created in Flash Pro Cs5.5

I've followed several instructions on how to develop a simple iOS app. I've managed to go all the way through and Publish + create the .ipa. I'm able to then add the file to my iTunes library, but when I then try to add it to my iPod Touch (2nd Generation) I get the following error:
The app "XXXXXX" was not installed on the iPod "XXXXX's Ipod" because it is not compatible with this iPod.
I've even tried it with a simple "Hello World!" app but I get the same error.
I'm using Flash Pro Cs5.5 on a Windows PC.
Any suggestions?

I'm having the exact same problem with my iphone 3G. I tried publishing the exact same simple flash app to my iphone, which I already previously tested succesfully, after having downloaded flash 5.5, and now I get the following message (which, I believe, is identical to yours kinant87) :
"The app "Main" was not installed on the iPhone "Norgaard" because it is not compatible with this iPhone."
I was trying to make another small app, when I got this problem, which is why I went back to re-test the app I knew was working!
I've reinstalled all my apple certificates, and also tried using flash builder 4.5, with the same result.
I also have not jail broken my phone, and was starting to think perhaps the iPhone 3G was no longer supported?

Another IOS App thread

Similar Messages

Maybe you are looking for