Another iWeb publish question

Using iWeb'06 on 10.4.11, wont publish to .Mac? theres no option to publish it to MobileMe? ideas?

Welcome to the Apple Discussions. What do you mean by it won't publish to .Mac? Do you get a message?
Try the following:
1 - go to the System/MobileMe preference pane and log out of MMe.
2 - login with a bogus username and password like "test" and "test". This clears the caches.
3 - login with your correct username and password.
4 - launch iWeb and try again.
OT

Similar Messages

  • IWeb publishing questions

    Ok first off, when I put files like pictures or video onto my page and publish it, do I still have to keep those files on my computer or will they operate on the site without a problem?
    Also what is the difference between publishing to a folder and publishing to .mac? When I hit the publish button on the bottom left, what does it publish too?
    Thanks in advanced.

    Once you have published your website, the files are uploaded to the server. There is no need to keep them on your hard disk if you don't want them.
    The publishing button in iWeb is for uploading your site to .Mac. Obviously, you have to have a .Mac account for this to work.
    The "publish to a folder" option is so that you can upload your files to any other server by FTP.

  • Iweb files removed once published question

    Hi,
    I have published some iweb pages and removed them from the server but saved the html files. I want to re post them to the server (not .mac). Any ideas how to do this?
    Thanks,
    Guy

    Um...if you have the folder of HTML files for your site, just upload them via FTP to your server. Then point your URL to the index.html file and you should see your site. Keep in mind that this MAY not work totally unless you have maintained the entire structure of the iWeb published folder...two index.html redirects to the start page....
    But it's worth a try....

  • Workaround for iWeb publishing each & every single file ?

    It's a real drag that iWeb publishes each and every single file to .mac every time I correct a comma somewhere. My site* is about 20 MBs, and I've been waiting for half an hour now to continue working with iWeb. But it's still uploading... uploading... uploading... Other servers are faster than .mac, but the problem is the same.
    Has anyone found a workaround for this nuisance??? Some method to export & sync only altered files? (Or were iWeb authors as bright as to make it change all files, regardless if the user changed only a comma?)
    Thanks a lot
    hp
    *) http://web.mac.com/hpr

    Hi Peter
    iWeb isnt actually uploading every page, unless you have made a change to that page, yes a comma will do it, also any changes to the navigation bar efffect all pages that the bar is on. WHat you see is iWeb going through and checking to see whether there are any changes, then if there are the page gets uploaded, if not it moves on to the next page.
    I try to publish often so as not to slow things down, my site is well over 20MB and I normally only wait a few minues. This is something that I am prepared to do for the convenience of one click publishing. I am currently uploading a 2.5MB site via ftp to another server, and it still takes a while
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Hyperlink to another bi publisher report in 10g

    I am using Bi Publisher 10g.
    I want to build a bi publisher report that makes a link to another bi publisher report. I created a Hyperlink in my template and it works fine, however the url that I am using is the full path to the xdo resource and their parameters, that means my url is http://myserver:myport/xmlpserver/~Myuser/MyReport/MyReport.xdo?parameter1={parameter1}&parameter2={parameter2}. The problem is that I want to call my report from dashboard and then when I follow the link the publisher link is opened and it worked fine but I want to see the output in the same window or other window but I don't want to see the complete Bi Publisher product.
    How can I build the hyperlink in order to see the detail report on a new window but without calling the complete Bi Publisher product?
    Thanks!
    Ramiro Ortiz

    Greetings.
    Problem solved. I just added the following parameter _xpt=1 to my hyperlink.
    Thanks anyway

  • HT4597 what will be the new alternatives for iWeb publishing,  Idisk & photo gallery ?

    what will be the new alternatives for iWeb publishing,  Idisk & photo gallery ?

    Thanks for the reply that there will be 3rd party support.
    One of the main reasons why I went from PC to Mac was because of all these cool features.
    Am dissapointed to see them leave.  ( Iweb, Photogallery, Idisk... )

  • IWeb published old photo names... will not update

    I am having a problem with the photo pages. When I first built a photo page I used images whose file names were too long. When iWeb published the files the names became corrupted and would not display.
    I can't get iWeb to forget the original file names...
    I have re-named, deleted, re-imported, changes the file size, and made all the changes I can think of to get the photos to be seen as new images. No luck.
    Every time iWeb publishes the site it uses the "historic" names for the files.
    Any ideas? I'm about to delete the entire site and start over... but I would rather not do it that way. Who knows, that might not even work!
    Thanks!
    PPC Powerbook 1.67   Mac OS X (10.4.5)  

    I've also had that problem - real headache
    Here's a fix (in princple) :
    Within iWeb delete the photos you don't want from the page.
    Save "command-s"
    Quit iWeb
    Before re-opening iWeb go and check the 'Domain' 'package' - this is where iWeb stocks the ressources and assets for you as 'user' :
    user/library/application support/iWeb/Domain
    Click right to show hidden package contents (I use French Tiger so don't know if that's the right command name but you get what I mean).
    Here you'll see all the files/images etc you have used in any of your sites/pages.
    In principal when you save in iWeb the Domain gets updated and should throw out any images you deleted from your iWeb page - so those 'old' files should no longer exist.
    I think what you may have been doing is deleting images from the page and NOT SAVING that change. In principal Publishing to a folder or .Mac constitues a 'save' but I'm not convinced that the two have the same effect on the Domain.
    I actually binned directly from the Domain once but I've read elsewhere that tampering there might cause probs.
    Hope that gives you some insight.
    G5 2Ghz   Mac OS X (10.4.5)  

  • IWeb publishes updates but does not upload in the FTP

    HELP!    
    I have a 'tried-tested-true' website that's been on the internet for 10 years. It's been updated over the years but needed much more as of today.
    The updates perfectly publish within iWeb [3.0.4]. The FTP uploads the site, but when I check it on the internet [Safari 6.2.3], the former version appears.
    I proceeded to troubleshoot by renaming the website and re-mounting the pages. Also, renaming the pages, but after several attempts of uploading each newer version, all efforts were to no avail. It has taken me a full day without results. That is, the original website remains on the internet, which is very outdated.
    I have run out of troubleshooting ideas. All of my other websites have not had this problem. There was an issue this week with the ISP Domain Host services not connecting my site. I contacted them, but have had no response. However, I thought I would try connecting again today in case they sorted out their connectivity issues. I am able to connect to their server. I have good reason to believe the FTP is uploading the updated directory files, but for some reason when it comes to viewing the site on the internet, au contraire.
    Not sure if this is an iWeb problem or my ISP domain hosting services having issues with connectivity. Whatever, it is very perplexing to me as to what to do next after the extensive amount of time I have taken troubleshooting.
    I repeat myself when I say, 'HELP!'

    Okay, I understand what you are referencing. I am publishing my websites to the path of 'Users'-Documents-Website Documents.
    Below is a screen shot of the folder my Websites are located. Is this what you are referencing? It is Site 2 that is having issues with uploading to the domain host server of my ISP. All the other sites have been uploaded successively.
    I use FileZilla as my FTP server and it has been excellent. I have tried CyberDuck, et al. FZ works perfectly well indicating all that one needs to know while uploading. If my other websites were causing the same issues, then it would mean FTP issues.
    However, I believe I am on the same track you are referencing with regards to my published website is in the appropriate location on my HD. I stand to be corrected.
    I believe by my contacting the Forum and reading your information that I am following protocol as I have always done with my 4 websites that upload properly. As I continue the discussion, it is becoming evident the issue is with the Domain Host server, which is not a problem to post on this Forum.
    However, I posted my issue just in case it was an iWeb issue or my not following protocol correctly to publish a website. From what I am gleaning with your information, I am following protocol. Repeating myself when I say it appears to be the aforementioned server. I have contacted them again about their Domain Host server but no response as yet.
    If what I am presenting to you is the correct protocol I have in place at my end, I thank you for taking the time to assist me. By doing so, I believe I will be able to determine it is not an iWeb publishing issue [mostly because all my websites are not experiencing this problem], nor is it the FTP server,FileZilla, but the Domain Host Server.
    As mentioned above, here is the folder where my websites are located.
    I so appreciate your assistance.

  • IWeb Publish Error - A lock occurred while publishing to MobileMe

    iWeb Publish Error - A lock occurred while publishing to MobileMe. Try publishing again later.
    I've tried all articles so far on apple support site. Tried on new OS user and publishing to folder and publishing a test page. I still get an error. Publishing to folder works fine, its just when I publish to MobileMe. Also tried different network and restarting computer etc.
    Help me. Thanks.

    If you are logged in OK maybe you should look at your Keychain.
    Finer/Go/Utilities/Keychain Access.app.
    Try "Keychain First Aid" from the "Keychain Access" drop down menu.

  • Problems with iWeb publishing to MobileMe

    Hi,
    Did you have some problems since about four days on publishing with iWeb to MobileMe? In my case, when I publish my site - and I made just little changes - iWeb publish ALL the pages.
    I early had this same problem, this spring, and it was a MobileMe problem; Apple just made a little update to the server and it was ok.
    I'm using iWeb'09
    Thanks

    With a lot of media content have you considered other ways of adding movies or audio tracks that only require you uploading those file manually once and then linking to them. For movies this demo page has one possible method: Opening Item in a New, Precisely Sized Window. This demo page has 7 movies added that way. They don't load until the play button is selected. PhotoPresenter Animated Slideshow Themes
    For audio you can use flash players or a flash jutebox. Roddy's site, iWeb for Musicians, has examples and how-to's for both. See the following pages: Music Players and the following 3 pages after it. See the Next Page button at the bottom.
    I've got a couple of flash players on my demo page: Music Players.
    There are many alternatives to having to load all the media each time you republish.
    OT

  • HOW TO PUBLISH YOUR WEBSITE ..FROM IWEB ..WHEN I USE TO USE MOBILE ME .. BUT NOW THERE IS NO MOBILE ME BECAUSE OF ICLOUD, AND ICLOUD DOESN'T SUPPORT IWEB PUBLISHING?

    HOW TO PUBLISH YOUR WEBSITE ..FROM IWEB ..WHEN I USE TO USE MOBILE ME .. BUT NOW THERE IS NO MOBILE ME BECAUSE OF ICLOUD, AND ICLOUD DOESN'T SUPPORT IWEB PUBLISHING?

    When MobileMe goes down the drain, you will need to move your website to standard hosting. Depending on your site size, I recommend A Small Orange, as the Tiny hosting plan they have is big enough for most iWeb sites and much cheaper then shelling out $6 a month for most of the other big names, and if you check out their forum, several of the members have coupon codes in thier signatures. Also, their customer service is great and very fast in getting back to you.
    To upload, I publish the iWeb site to a folder, then using Cyberduck upload it to the host. Cyberduck beats iWeb's FTP uploader because Cyberduck only replaces updated pages, instead of uploading the entire site.
    I hope this helps!

  • How do I get iWeb to open another iWeb backup file? (I accidentally saved the file iWeb is pointing to, and don't want it.  I want to use a prior back-up iWeb version.)

    How do I get iWeb to open another iWeb backup file? (Made a mistake and don't want current file iWeb is pointing to)

    Thanks Roddy.
    FYI- I downloaded the "Domain.sites2" file from your page (because I deleted mine yeterday)  So now the file is sitting on my desktop in my "Download" window.
    I see the good back-up file I want to use on my desktop, but when I go to drag the file from my desktop and drop it in "Home/Library/Application Support/iWeb", it does not take.  I am not allowed to drop files on that iWeb page directly.  (I tried to drop the the "Domain.sites2" file from the Download window, but that also does not allow me to drag and drop it directly to the iWeb folder.)

  • IE Scolling/Lag issues with IWeb Published Site

    Has anyone had any issues with scrolling/lag with Internet Explorer on an iWeb published site? I have a site that runs great on Firefox and safari but terrible on Internet Explorer. I'm thinking it may be the template/design i used?
    Anyone every seen this? Any suggestions?
    Thanks,
    JC

    I've only ever used the Modern Frame, so I can't say if there would be a performance issue using a different template. I have about three pictures on each page.
    I noticed on your site that you're using the "reflection" effect on some of your pictures. Just for the purpose of testing, perhaps you could try turning off that effect and then re-uploading your site to see if that is causing some of the problem? I believe the reflection is rendered using javascript code, which may be causing the poor performance in IE. If that does turn out to be the problem, you can decide whether it's worth it to keep the effect or not.
    By the way, I don't get that same error message in IE when I open your Videos page. Maybe it's caused by a security setting in your IE being set at a more restrictive level?

  • IWeb publishes, but there is no change to the site on .MAC

    I have had a recent problem, where i apply changes in iWeb, publish them successfully (according to the program) and then try and visit them to find an unchanged site.
    How do I trouble shoot this?
    Thanks
    MZ

    Hi
    My URL for my home page is http://web.mac.com/martinzimelka/iWeb/homepage
    I've put a screen-shot on a download page of mine of how the "homepage" should look like
    http://homepage.mac.com/martinzimelka/FileSharing5.html
    I have deleted the iWeb folder contents on the iDisc, and then had iWeb publish the whole thing again.
    Still the http://web.mac.com/martinzimelka/iWeb/photography link and the
    http://web.mac.com/martinzimelka/iWeb/homepage show the old pages.
    MZ

  • IWeb FTP question

    I need to publish my site into a certain folder of my web site, but I don't see an option on how to do that. It would be much easier to have iWeb publish to the folder rather than going through and saving to a folder, then uploading through an FTP client. Any suggestions? Thanks.

    You should be able to set the ftp path in iWeb just like you do in your ftp client so you can publish directly from iWeb to the server.
    Click to view full size
    OT

Maybe you are looking for