Another Log & Transfer Error Thread

I have read over all log and transfer threads. I have done everything I could find that was previously described in other threads by deleting the pref. files and all that jazz. Followed everything in this thread http://discussions.apple.com/thread.jspa?threadID=2672530#NoData . I am certain that all my setting are set correctly. I am still running across the error when transferring telling me the clip has no data. My specs are the following:
Camera: Sony HDR-AX2000
Filming in 1080i60 (all setting in FCE reflect this)
I do not know what else to do to fix this problem. I am transferring directly from the SD card plugged into the stock port in my computer. I have not tried transferring with my camera plugged into USB 2.0 but am pretty sure these are both the same methods, as I have read. Am I missing something? Any help would be appreciated. Please let me know if there is any vital information I may have left out to get proper help.
-Thx

Hi -
Don't know if this is repeating advice you have already applied but:
1) Make sure you are editing with the latest update to FCE, FCE 4.0.1
2) Make sure you are recording HD with your camera. SD will not transfer by Log and Transfer - only HD.
3) There are reports of difficulties using Log and Transfer if you Camera Storage Card also contain clips in other video formats and/or if it contains still images.
4) Open the Log and Transfer window.
Click on the little gear shaped icon towards the upper middle of the L&T window
Select Preferences from the drop down menu.
When the preference window opens, set the AVCHD Plug-In audio format to Plain Stereo.
5) When you are navigating to the Storage Card, navigate to the top level of the card only. Do not drill down into the card structure. Log and Transfer needs to see the Card Structure to ingest properly.
MtD

Similar Messages

Final Cut Express Log & Transfer Error No Data

Hello all, after hours pouring through the threads with similar questions, I have had no luck. I have been using FCE for nearly two years, and have never seen this error message "No Data"
Last night, I was in the middle of transferring clips from my Sony hdr xr520v using my MacBook Pro capturing on my external HD with over 200GB available. The transfer was going smoothly, but VERY slow - slower than I remember it ever taking. I thought I would be a bright one and switch from my Firewire port to my USB (I had been capturing via USB for about 6 months when my logic board fried and external drive was not visible via Firewire only USB) In any event, I'm boring you with the details so you can replicate the scenario. The transfer was working with Firewire but I switched back to USB illogical I know since Firewire is faster than USB, but I was going with prior 6months experience. When I connected the HD with the USB, all of a sudden I got the No Data error message. I promptly switched back to Firewire, but I am still getting the message! What have I done?
I checked my settings - Log & Transfer is set to AVHD Plug in and Plain Stereo. Both audio and video are checked, FCE is set to HDV- AIC 1080i50.
I can not log & transfer ANY clips into FCE (not even the ones already imported last night) I can, however import all into iMovie (which I know doesn't care about all the stuff FCE cares about but helped me eliminate the possibility of corrupt clips).
ANY help would be MUCH appreciated

I thought you had to use USB 2.0 to log and transfer AVCHD . . . . definitely not Firewire?
I suggest you trash the preferences as detailed in the link below and start again with the correct Easy Setup and using USB 2.0.
http://www.fcpbook.com/Misc1.html

Log & Transfer Error (.mov files) Issue

When I add my SD info in Log & Transfer Window i get the error message "100Canon" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.....
I used a Canon EOS Rebel to get the footage. I understand that FCE does not work with these .mov files without having to be forced to render.
Is there any way that I can transfer these .mov files to avoid having to render? If not can I convert them to another file without loosing quality? Is there any solution to avoid having to render?

You may lose a tiny bit of quality but it won't be noticeable. In Streamclip, you go to +File > Export to Quicktime+ and choose the Apple Intermediate Codec as your compression. Make sure you set a frame rate of 29.97 and audio to Uncompressed Stereo 48kHz. The exported video will be an AIC file in a .mov container.

Log & Transfer Error...

Using a Sony HXR camera (AVCHD) and FCE 4.0.
When adding clips to the Log & Transfer window, I get a spinning wheel, then a red hexagon with an exclamation mark in it. The continual error is "no data", no matter how many times I try.
I have been looking through this and other forums for hours and have tried all the suggestions... specified Apple Intermediate Codec, selected "plain stereo" etc. etc.
Would appreciate any suggestions as this is seriously frustrating and I need to finish a project... thanks.

No worries.
The updates adds a few Easy Setups that most likely your camera employs.
Al

Another Expired Certificate Error Thread

I've searched all over, and apologize in advance if there is already an answer for this.
I'm using the Symbian Belle OS and am running into the old problem of expired certificate errors when trying to install certain apps. The solution to this was to change the date on the phone so it coincides with that of the application you're trying to install. But that solution is no longer working.
Does anyone know of a workaround?

I did every year all the way back to 2000 but no luck
I also tried sites that will convert the .sis file into one with a valid certificate, but that fails as well. When going down that road it just tells me the certificate is not valid or that the author cannot be verified (instead of expired).

Log & transfer error. mts files

I recorded video with panasonic gh2.
I had problem that mts files didn't trasfer.
I had been test record that had no problem. When I do test record, it is only one file.
But this is 31G and 250 cuts. what happen to me?
I want to reduce less data lost.

More information would make things easier. Can you post what Mac you are editing with, how the Mac is set up, which version of Final Cut Pro, and your workflow?

Error message on MXF Log & Transfer

Haven't had this one before. I have another post running asking for assistance in converting MXF P2 card files to MOV without using FCP. I thought I should also post for help on the original problem.
I take in a lot of video shot on P2 cards for editing. I received files recently shot on the Panasonic HPX300. Started up FCP 7.0.3 (I won't upgrade to the balky newer version) and started the Log & Transfer as I have done countless times without an issue.
There is over 500GB of material here. MOST of it came in and then once put in the queue was converted and placed in it's proper place in the bins. However, a number of files did not transfer and this is the error message on each one:
"m" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
Checked a few things:
- The files and folders were not renamed.
- I tried the files both from the original hard drive they were downloaded onto and another external of my own I placed copies on.
- I do not have the original cards. These files were sent to me by the photog.
- Here's the poser. When FCP starts and L&T is selected, and I chose the proper drive with the folders, the files show up in the upper area before being moved into the queue. When there, I can click on a file and see the video playing properly in the preview window to the left. No problem.
But when I move that video file to the queue for transfer, the problem files will reach about a third and then the error message. So I KNOW the files are there and they are playing back, but I cannot get them to transfer.
There is no rhyme or reason as to which ones fail. They come from the same folders, same contents, yet some will transfer and others will not.
Help is greatly appreciated on this one. THank you.

Hi,
Your Software Development kit - Development Version validation date may got expired.
Normally, We will get license for SAP B1. Along with SAP B1 Licenses (Professional User license) we will get license for SAP Addons, Compatibility License for Addons, Software Development Kit - Development Version or Implementation version and SDK Tools Licenses.
Goto Administration --> License --> License Administration --> Components Tab.
You can view the License details with their Expiration date particulars. In this you click the Software Development Kit - Development Version in list. You will view the related informations on right side.
To solve this problem, Renew the License of SAP with the help of your Implementation partner. They will download the license and upgrade your SAP License. Atpresent SAP has provided the license validation till 31.12.2099.
I hope this could help you.
Raja.S

Log & Transfer of Canon HF 11: error message

Hi guys,
I just got a new canon HF 11 (basically the same as the HF 10) and i tried to import footage using Log & Transfer but every time I click "add clip to queue" it spins a grey icon for a few seconds which then turns to a red circle with an exclamation mark inside and says "Error: No Data". I have tried giving the clip an in and out mark but this doesn't help.
Any ideas,
Thanks

I have had a similar problem with my Canon HG21 which has both hard disk and 32GB flash drive. My method is to copy files from the Hard Disk to the flash drive and then place the flash drive into a card reader. I was able to see FCE downloading in log and transfer for a second or two and then it went into an idle mode and never downloaded the file.
My solution was to delete ALL from from the flash drive followed by copying the videos and stills from the hard disk onto the clean flash drive. I realize you don't have the luxury of the hard disk, but perhaps you can extract the files using the Voltiac tool to clone the Canon structure from the camera and see if log and transfer will work directly from your hard disk on the Mac.

Can You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

How do You Transfer iTunes from One Log-in to another Log-in on the SAME computer with SAME account?

Move the files to the /Users/Shared/ folder and then to the other account's home folder.
(85927)

Log & Transfer of AVCHD fails to transfer - Write TimeCodeTrack Error -2008

Hi,
I'm testing out my new Canon HF11 and copied the AVCHD directory for a test shot onto my hard drive, created a new project in FCE 4.01, created a Bin, set it to default capture bin, then started Log & Transfer.
When I select the AVCHD directory I see the two clips I recorded, and I can preview them in the L&T preview window. Dragging them to the Transfer Queue works, and I see the spinning disk to indicate it is being processed. After the progress bar reaches 100% the disk stops spinning, but there is nothing in the Bin.
When I click on the clip in the transfer window it changes to indicate there was an error.
Looking in the COnsole log shows:
1/8/09 10:17:02 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] objc[67259]: Class MIOGenericUserDefaults is implemented in both /Applications/Final Cut Express.app/Contents/PlugIns/AVCHD.RADPlug/Contents/MacOS/AVCHD and /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2. Using implementation from /Applications/Final Cut Express.app/Contents/PlugIns/P2.RADPlug/Contents/MacOS/P2.
1/8/09 10:17:03 PM Final Cut Express[67259] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
1/8/09 10:17:03 PM Final Cut Express[67259] WARNING: Using deprecated NSTreeController internal API. Break on 'observedObject' to debug. Use of this method should be replaced by NSTreeNode/representedObject
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:2508:*WriteTimeCodeTrack ### Err -2008*
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:1381:*WriteMovieTracks ### Err -2008*
1/8/09 10:18:25 PM [0x0-0x5f65f6].com.apple.FinalCutExpress[67259] Thu Jan 8 22:18:25 2009 MIOUnit_HelpersQTFileWriterBase.cpp:1313:*WriteMovie ### Err -2008*
Help?
Thanks,
Graham

MacPro Dual 2.66 Xeon (2007 model), 8800GT video, 10.5.6
OS and application drive has 463Gigs Free.
Video is being captured to 2 drives - one has 429 Gigs free, the second has 230 Gigs free.
The clip I'm trying to process is 00:01:07 (one minute, 7 seconds). It was recorded on the FH11 at the highest resolution (1920x1080, Cine Mode) and I selected AIC 1920x1080-60I and changed Matrix to Stereo in the L&T properties.

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

How can we a validate a CSV file in SSIS and log the error details in another CSV File by using Sript Task.

Please see:
http://www.bidn.com/blogs/DevinKnight/ssis/76/does-file-exist-check-in-ssis
http://social.msdn.microsoft.com/Forums/en-US/01ce7e4b-5a33-454b-8056-d48341da5eb2/vb-script-to-write-variables-to-text-file

"clips queued-idle" error using log&transfer in FCP7

Hi, I shoot HDV on a Sony Z5 and now want to use a Sony memory recording unit (HVR-MRC1) instead of tapes.
Today I ran some tests and the first time all went well: I connected the HVR-MRC1 with a firewire cable, opened log&transfer in FCP 7 and no problem importing all the files (after downloading a plugin).
But then I deleted all the files and recorded some new clips. Once I tried to import those in FCP, using log & transfer I could only import 7 of the 9 clips. Of the 2 clips it didn't want to import it said "clips queued - idle".
Also, I realised that none of the clips I shot could be previewed and I couldn'y choose an in- and outpoint before importing. I could only import the whole clip.
I would be extremely grateful if someone could help me with this. I'm looking forward to working tapeless, but I need to be 100% sure that I'll have access to all my footage.
Many thanks in advance!

First thing, I always copy the material to a local hard drive before doing the log and transfer. Make sure you copy the containing folder from the camera. If you change the folder structure, fcp will not be able to access the material.
What settings did you shoot with. FCP is not compatible with certain formats. If you have access to Premiere, you may be able to convert the files to an fcp friendly format.
Good luck.

FCP 7 crashes when Log & Transfer MXF files

I just got a new MacBook Pro and Final Cut Studio that includes FCP 7.
I just received footage from my DP shot on a Panasonic HVX200 on P2 Cards and saved as MXF files. I saved all files onto my MacBook with a backup on an external USB drive (another set was saved on a Firewire 800 drive).
All footage was shot 720p/24fps.
I can view the files on the Log & Transfer preview window - but when I attempt to ingest via Log & Transfer, the transfer begins but suddenly stops (status is idle) and the red ! stop sign appears - obviously the file was not ingested. When I attempt to re-start the transfer or try with another file, FCP crashes.
My understanding is FCP 7 is able to accept native P2 format files (MXF) without transcoding - so it is very disappointing this is not working.
Easy Setup settings are:
Format: Panasonic DVCPRO HD
Use: DVCPRO HD 720p/24
Portion of error log:
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x00000000ffffffff
Crashed Thread: 0
I would greatly appreciate any insight!

It doesn't transcode...it wraps the MXF files into a QT wrapper, joining audio and video. DVCPRO HD P2 mainly. AVCintra native support is here too, but you need to render to ProRes.
BUT...that isn't the case here...try this:
in the P2 Import window...in the P2 Browser, there is a little sprocket drop down menu. Click on that and choose PREFERENCES. Uncheck REMOVE PULLDOWN and then try importing again.
Shane

ORA-00333: redo log read error block 283081 count 8192

I am starting the database..it mount but after that it gives me this error
ORA-00333: redo log read error block 283081 count 8192
Below are the contents of alert Log.._Please advice_
Completed: ALTER DATABASE MOUNT
Tue Jan 20 10:24:45 2009
ALTER DATABASE OPEN
Tue Jan 20 10:24:45 2009
Beginning crash recovery of 1 threads
parallel recovery started with 2 processes
Tue Jan 20 10:24:45 2009
Started redo scan
Tue Jan 20 10:25:00 2009
Errors in file /d01/oracle/PROD1/db/tech_st/10.2.0/admin/PROD1_prod1/udump/prod1_ora_32356.trc:
ORA-00333: redo log read error block 283081 count 8192
ORA-00312: online log 2 thread 1: '/d01/oracle/PROD1/db/apps_st/data/log02a.dbf'
ORA-27072: File I/O error
Linux-x86_64 Error: 2: No such file or directory
Additional information: 4
Additional information: 283081
Additional information: 257536
Tue Jan 20 10:25:16 2009
Errors in file /d01/oracle/PROD1/db/tech_st/10.2.0/admin/PROD1_prod1/udump/prod1_ora_32356.trc:
ORA-00333: redo log read error block 283081 count 8192
ORA-00312: online log 2 thread 1: '/d01/oracle/PROD1/db/apps_st/data/log02a.dbf'
ORA-27091: unable to queue I/O
ORA-27072: File I/O error
Linux-x86_64 Error: 2: No such file or directory
Additional information: 4
Additional information: 283081
Additional information: 257536
Tue Jan 20 10:25:31 2009

I did what Prabhu told me..But i recovered using backup controlfile and when i was asked to apply logs..i applied my oldest logs and it worked
Like i have two groups with two members each
I applied log1a.dbf and it said media recovery completee
I opened the database But then it started giving me errors for undo tablespace
I made another undo tablespace..tried dropping the old one but it did not permitted as it had some segments with status "needs recovery"
Than i added this parameter in pfile with the correupted segment and than tried to drop the segment but it still did not permit
corruptedrollback_segments =(corrupted_undo segment_name)
Next what i did was I mounted the database, ran another session of media recovery and opened the databse using resetlogs
Than i dropped the old undo and it went through successfully..
If you think anything i did wrong than please advice..
I hope this action plans helps you in case you come across same errors some day
I would be very thankful if you can refer me a document of recovery which covers all kinds of recoveries and scenarios and commands too
Thanks alot

ORA-00333: redo log read error block 65538 count 8192

Hi,
I wanted to alter user hr's password, but I couldn't open the database first. What should I do? Here is my demo: Thank you for your response.
C:\>sqlplus /nolog
SQL*Plus: Release 9.2.0.1.0 - Production on Sun May 16 12:12:43 2004
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
SQL> connect sys/oracle as sysdba
Connected.
SQL> show user
USER is "SYS"
SQL> select * from v$controlfile;
STATUS
NAME
C:\ORACLE\ORADATA\SARAH\CONTROL01.CTL
C:\ORACLE\ORADATA\SARAH\CONTROL02.CTL
C:\ORACLE\ORADATA\SARAH\CONTROL03.CTL
SQL> select * from dba_users;
select * from dba_users
ERROR at line 1:
ORA-01219: database not open: queries allowed on fixed tables/views only
SQL> alter database open;
alter database open
ERROR at line 1:
ORA-00333: redo log read error block 65538 count 8192
SQL> desc v$instance
Name Null? Type
INSTANCE_NUMBER NUMBER
INSTANCE_NAME VARCHAR2(16)
HOST_NAME VARCHAR2(64)
VERSION VARCHAR2(17)
STARTUP_TIME DATE
STATUS VARCHAR2(12)
PARALLEL VARCHAR2(3)
THREAD# NUMBER
ARCHIVER VARCHAR2(7)
LOG_SWITCH_WAIT VARCHAR2(11)
LOGINS VARCHAR2(10)
SHUTDOWN_PENDING VARCHAR2(3)
DATABASE_STATUS VARCHAR2(17)
INSTANCE_ROLE VARCHAR2(18)
ACTIVE_STATE VARCHAR2(9)
SQL> select instance_name, status from v$instance;
INSTANCE_NAME STATUS
sarah MOUNTED
SQL>
*******************************

I did what Prabhu told me..But i recovered using backup controlfile and when i was asked to apply logs..i applied my oldest logs and it worked
Like i have two groups with two members each
I applied log1a.dbf and it said media recovery completee
I opened the database But then it started giving me errors for undo tablespace
I made another undo tablespace..tried dropping the old one but it did not permitted as it had some segments with status "needs recovery"
Than i added this parameter in pfile with the correupted segment and than tried to drop the segment but it still did not permit
corruptedrollback_segments =(corrupted_undo segment_name)
Next what i did was I mounted the database, ran another session of media recovery and opened the databse using resetlogs
Than i dropped the old undo and it went through successfully..
If you think anything i did wrong than please advice..
I hope this action plans helps you in case you come across same errors some day
I would be very thankful if you can refer me a document of recovery which covers all kinds of recoveries and scenarios and commands too
Thanks alot

Another Log & Transfer Error Thread

Similar Messages

Maybe you are looking for