Another N80 PROBLEM (I think?)
i was stupid enough to get an N80 on ORANGE... eversince the phones constantly connecting to orange internet without even a warning!
has anyone else had this problem or do you think its the sim
is there anything i can do to fix it!
Seraphin,
Dont know what your problem is but you seem to constantly be giving insults to people who dont conform to your ideas or suggestions here.
I have spoken to many people who are not happy about the operator firmware because of problems it gives them because of restrictions and the way that the operator configures the phone so that you have to use their sevices, especially in the begining withought realizing and actualy being charged a large amount of money for these services.
I made one suggestion that somebody can take or not, its up to them, not you..the suggestion wasnt meant for you.
I know many people who have upgraded from network specific firmware to non network specific firmware, and some of those upgrades were done at Nokia sevice centers and the warantees on those phones are still intact. This rightly or wrongly has been explained to them by the NSC and if there is a problem with warantee then this is the problem of the NSC that the upgrade was made.
please keep your personal insults to yourself, or as I have suggested to you before PM me and I will answer you directly, as you keep telling us to the point that its getting boring, these forums are for help and advice, I dont see insults either helpull or good advice.
Live by your own preachings.Message Edited by cash on 05-Aug-2006
11:21 AM
Message Edited by cash on 05-Aug-2006
11:23 AM
Similar Messages
-
Hi - okay found this other problem
when reading emails and sometimes writing or reading texts, as soon as you scroll down to read or write these messages, the first 1 and 1/2 letters of a line dissapear!! yes thats right, 1 and 1/2 characters vanish!
so you cant actually read the message properly!
does anyone know what the hells going on?
this happens all the time... its driving me insane!
as an example, this is a text i got today
(obviously i cant show you what half of a letter looks like, but you can imagine)
(obviously i cant show you what half of a letter looks like, but you can imagine, just cut some of the letters in half and you can maybe think what its like)
ello Wayne, hows things with you?
e good to meet up for a drink soon
ows everyone doing there in the uk?
y band is doing great over in the US
u must come over and visit before the years out
it should have read like this below!
Hello Wayne, hows things with you?
be good to meet up for a drink soon
hows everyone doing there in the uk?
my band is doing great over in the US
you must come over and visit before the years outMessage Edited by waynester on 04-Sep-2006
11:55 AMyep, same here mate, i guess it's a firmware problem, it's only happened once or twice with me, so i don't really mind
my phones in order of appearance : (starting 3 years ago!) Sony CMD-Z1 plus, Motorola timeport, Nokia 3310, Nokia 3410, Sony Ericsson T300, Sharp GX10i, Sharp GX30i, Sagem My-X-2, Sony Ericsson V800, Sony Ericsson P900, Samsung D500, Sharp 902, Nokia N80 (got mugged by 4 20 year olds). Motorola V3, Sony Ericsson K610i, Samsung D800, LG Chocolate, Nokia N70!
I change phones a lot, have had 11 different handsets in 2006!! -
Another font problem, I think.
Now that I have the basic two fonts cleared up, most text in the drop down lists are scrambled. An image here: http://www.anthemwebs.com/images/fontsafari.gif
Any thoughts?
HP Windows VistaRelease 3.0.2 solved the problem.
-
dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done. -
i have a question my iphone4s has a problem when updated iOS8 there will be freeze problem i think iOS8 is not supported in 4s!!!!!!!!!.
one more question when i phone5 update with iOS 8.1.2 this iOS supported iphone5???Hi Ios 8.1.2 Should work on iPhone 4s / 5 You may have a bug Backup to cloud over WiFi Then Restore back to Factory Settings This will make iPhone as new. Use same Apple ID & you will get your Apps & Data back Do Restore over your WiFi. Cheers Brian
-
I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF files on my iphone?
Apple never bopthered to explain that this would happen
Your iDisk is still accessible after moving to iCloud in exactly the same way as before. Nothing is deleted until June 30th 2012.
, so I could easily have lost ALL of the files I kept on iDisk.
No, you couldn't. Firstly, nothing was deleted from your iDisk. Secondly, any files stored on your iDisk should never be your only copy. Even if your iDisk spontaneously combusted, you should keep local backups elsewhere.
Does Apple WANT people to move their storage elsewhere and stop paying Apple for it?
Yes. Apple doesn't provide such a service anymore, nor are you paying them for it.
Apple has made no effort to suggest remedies for the problem it has given iDisk users
They've provided instructions on how to download your files from your iDisk. What you do with them after that is your choice. -
I'm trying to make a resume. All the templates are in another language (spanish I think). How can I change to english??
Another one!
The scary language is Latin, quotes from Cicero to be precise.
It is Placeholder Text designed to show the appearance and layout of the document.
You click in it, something most people try, and it is selected. You then type to replace it.
Peter -
YAPP (Yet Another Printing Problem)
I've found another printing problem - this time with colour printing.
To my
surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
using
NT drivers for the 660C, the printer being connected to a Win95
machine).
I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?
Is this another of the 'Printing works fine as long as it happens
non-locally?'
features?
Thanks
Jamie Anstice
Programmer/Analyst, University of Canterbury
New ZealandI can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?Hi Jamie,
I wonder if this is related to the printing feature I discovered
where things I print from Forte have a strong tendency to come out in
the same colours as my windows desktop, which is
typically yellow-on-black.
- Ed
================================================================================
Eduard E Havelaar, Information Services Section, University of Canterbury
email: [email protected]
phone: +64-3-366 7001 extn 8910
fax: +64-3-364 2999
snailmail: Private Bag 4800, Christchurch, New Zealand -
I bought Lightroom 5 separately but when I try to install it I am told I need another number. I think I just bought an upgrade version. How do I get the original?
Thanks for no help... but for anyone else, turn off itunes match on the ipod
-
Another group by having problem I think ...
I have a table defined like so ...
create table mytable (
subcode number,
name varchar2(10)
I suspect that I have records in this table that look like so ...
SUBCODE NAME
123 Jim
123 Mary
... this is bad.
I ran a query like this ...
select subcode, name, count(subcode) from mytable group by subcode, name having count(subcode) > 1
... and got back zero results.
Does this mean I DO NOT have duplicates?
ThanksYou do have duplicates but your statement doesn't show that since you are grouping by SUBCODE and NAME. Since your have the same SUBCODE but a different NAME for the duplicate SUBCODE you get only 1 result with your group by statement. Here are two examples:
select subcode, name, count(subcode)
from mytable
group by subcode, name
SUBCODE COUNT(SUBCODE)
123 2
select subcode, name, count(subcode)
from mytable
group by subcode, name
SUBCODE NAME COUNT(SUBCODE)
123 JIM 1
123 MARY 1This statement will give you what you are looking for:
select subcode, name
from mytable
where subcode = (select subcode
from mytable
group by subcode
having count(subcode) > 1); -
I think another ClassPath problem
I have a java application (class) called MainClass in package MP1. I want to use an external class in
it. the class is called kl1.java and here it is.
package pak1;
public class kl1 {
public int k;
I tried to import that class using JBuilder, Netbeans with no success. I don't want to put that class in my MP1 package (because it is not actually one but many classes, and they are all defined to be part of the pak1.something.something packages). If i put them in my MP1 package i will have to change every class to be part of the MP1.pak1.something.something package which obviously i can't do.
So the classes i want to use are located at C:\pak1 and my project is located at C:\myProject. How to use those classes. I added the classes with JBuilder somehow and it recognized them i.e. when i started writing import pak.k... it poped up the autofinish dialog with kl1 class showing. so it found the class. but when i compiled it it said couldn't find class.
the line kl1 k = new kl1(); was an error, it couldn't find kl1.
Please help. Thanks!in the older versions of NetBeans you had to tell your project which folders to include; you used to be able to do it with a right click on resources and browse, but i've not looked how to do the same thing in the new version yet.
-
Hello all!
I'm a new Nokia N80 owner.. I've used SE's for the past 6 years and thought it was time to move to a smarter phone..
Well.. I've had the phone a month and it's all gone wrong, several times.
Firstly my photos stored on my phone and on my 1 gig memory card were no longer showing up on the phones gallery and the only way to access them was to view through the File Mgr. application. This would take forever and a day to load... but eventually they did.
I thought the smart thing to do would be to upload the latest firmware.. I did this and the phone died a horrid death giving me the 'Contact retailer' message after booting up.
I tried the hard reset etc and nothing worked so I took it to carphone warehouse who told me it would be ready to collect free of charge in 24 hours.
I returned the very next day to be told the phone had been sent away and could take up to 4 weeks.
Anyway, last week Thursday I received my phone back and woopie, it turns on and functions.. only.. it functions to the extent it did before i tried and failed the firmware update.
So.. my current problems:
I cannot view images / movies in the gallery
When I use the datacable it automatically disconnects itself just toward the end of doing whatever action it is doing.. such as:
I tried to move the images from my phone to my desktop pc .. it moves the files then brings up the window to tell me it is deleting the files from the phones card memory.. around the 75% mark it tells me connection to the phone has been lost.. even if I do not touch the phone, the pc and am in another room! My USB sockets are fine it is not them!!
PLEASE!!! Any help would be most gratefully received and I would do a big smile.
Ta.
Jamie03-Apr-200707:03 PM
jsneer wrote:
Firstly my photos stored on my phone and on my 1 gig memory card were no longer showing up on the phones gallery .. This would take forever and a day to load... but eventually they did
Don't understand this: I've never had this problem with my N80 - even using old firmware.
My guess - and that's all it is - is that maybe you had too many pictures for the gallery to cope with (the fact it takes a long time to open the directory in File Manager suggest you have a LOT of files in there) ..
03-Apr-200707:03 PM
jsneer wrote:
When I use the datacable it automatically disconnects itself just toward the end of doing whatever action it is doing..
Usually this is because the connector at the bottom of the phone is dire. Basically, if you so much as breath near the PC, the cable or the phone you get a brief interruption to the connection and everything fails.
Sounds like this may not be your problem, though. You could try uninstalling and re-installing the cable drivers on your PC, but I don't hold out much hope.
I think I would go for using Bluetooth (slow, though) or a card reader (fast, if you have one but no good for synching contacts etc).
03-Apr-200707:03 PM
jsneer wrote:
it moves the files then brings up the window to tell me it is deleting the files from the phones card memory.. around the 75% mark it tells me connection to the phone has been lost
In this case I would simply disable the delete option in the Image Store Settings and delete the pictures using File Manager on the phone - if you use Mark All and delete it's fast to do. -
Excel Readpage Save as another file problem
Hi,
I have attached the VI needed If you have any problems please let me know. This VI reads a excel page the user points to and displays the results. I have added a single cell where you can change the position of a single cell coordinates so that you can point to a single cell of your choice and retrieve that data. So my problem is now I want to save that data from that single cell to ANOTHER excel file. However, this is not working correctly for some reason I do not know why I believe I have done everything correctly hopfully it is just my inexperiance. I will continue to work on this and update it as I get more time but at the current moment I have hit a brick wall. I have visited the EXCEL BOARD and the vi is from there but I had to add somethings to it in order for it to work correctly as before it wouldn't even run because it was missing some connections and nodes.
Attachments:
ExcelReadPage.vi 45 KBI took a look at the toolkits. The VIs are there, the problem is that
the linkages are a bit screwed up so the top-level VIs think the subVIs
are in different places. Also, the toolkits were written using an
older version of Excel, in which the "Range" object had the property of
"Value". Excel 2003 uses "Value2". So, if you have Excel 2003 even
after you load up the VI the "Value" property nodes need to be changed
to "Value2". This is not a fault of the toolkits - this is due to
Microsoft changing the ActiveX interface.
As to your issue: Your basic steps are to:
Create a new workbook
Write values to cells
Save workbook
The "Write Table to XL" that ships with LabVIEW does that. Launch the Example Finder (Help -> Find Examples) and search for "excel". Then, open the "Write Table to XL". The "Table" control is the data that you want to write. It can be a single cell or multiple cells. If you have a single value, just make a 2D array out of it. As it's written it will prompt you if you want to save the file. This is from the "Close" method. You can wire a True constant to the "SaveChanges" parameter and a path to the "Filename" parameter. -
Query structure problem (i think)
hi am trying to get selected strings out of a jlist
and concanate them into a query i dont have any
problems getting the strings out of the list and
into the query ,i think that my problem lies within
the structure of my query.i am trying to create a new
user for a database and set their privleges when i run
the program and create a new user every things fine as
long as the only value that i select from the
privilegs list is "ALL PRIVILEGES" or "CREATE" any ther values
and i get a connection failure to the MySQL server. could any one tell
me where i am going wrong or knows the structure of another query
that can do the same job???
cheers gerry
final String privilegetype[] = {"SELECT","INSERT","UPDATE","DELETE","CREATE"
,"DROP","ALL PRIVILEGES"};
String databasename[] = {"garage","music store",};
//the query where mk=the selected string from privilegetype,
mkk=the selected string from databasename,
name=new username,new String(pass)=the new user password
s.executeUpdate ("GRANT "+mk+" ON "+mkk+" TO "+name+" @"+host+"
IDENTIFIED BY '"+new String(pass)+"' WITH GRANT OPTION");Output the actual query string and see if you can run it outside Java. If you cannot, then it's a database/SQL problem, not a Java problem. If you can, come back and post more details.
-
Another connection problem (with a lot of solution advices tried o
hi everybody,
since yesterday i'm a proud owner (more or less) of a zen x-fi. the only thing that dri'ves me crazy is that i can't get it working with windows.
first of all the system config:
Desktop PC (P4 on 95P Express chipset)
Windows XP Pro SP3
Media Player
i searched the web and am trying to solve this problem: "there was a problem installing ..." for quite a long time now.
here's what i did up until now:
- deinstalling Media Player and installing v0 - couldn't deinstall v
- installing newest version of the WMP (v - 5th Oct. 2008) from Microsoft to get the newest MTP support
- deinstalling the "Creative Centrale" and reinstalling it (at the moments it's uninstalled)
- installing Microsoft User Driver Framework v.0 (wouldn't allow me - of course, because it's implemented with WMP or rather it's drivers are older)
- setting USB ENUM to "read" and "full control"
- deinstalling and reinstalling the USB drivers (motherboard support as well as chipset vendor newest drivers)
- checking every single USB port (front and back)
- settings for USB HUBs to "full power supply" (no Power Management)
- reinstalled SP3
- got all new Updates from Windows (critical updates) including all up to date .Net Framework versions
- tried the Media Transfer Protocol Porting Kit (quite sure that this doesn't do anything since it seems to be the sdk version and i know to little of programming to try something out)?
- downloaded the fixup (found it in different posts to have been a workaround) and there was a little success: i got a working driver (no "there was a problem installing ...") until i realized that it doesn't show anything inside the folder (mtp/portable device) neither does it say "zen x-fi" in the device manager (it's only called "mtp device"). checked the .inf in the fixup package and realized that it couldn't work as long as i don't know the x-fi's Product ID, which i searched for on the internet (linux forums etc.) but the x-fi seems to be too new
now: i of course tried it on another PC to be sure (Laptop with Windows XP Pro SP3 and WMP 0!) - and it works ...
downside is: my library is fairly big and would fit on the Laptop's harddri've. i found a little workaround and imported the folder into the laptop's winamp library (via Network) and got some songs onto the Zen but it takes a lot of time getting them through the network connection (WLAN).
as i see it there's only two chances: either the USB is not suitable (which i can't believe, since everything else that i attach is working fine and without any issues) or the problem has something to do with the Media Player's MTP.
so does anyone have another idea or would i have to wait for either Windows or Creative to come up with a solution(maybe another hotfix)?
thanks in advance
regards
alIve been having hell with this aswell, although i think my computer is to blame. It "should" work if i could install wmp, but i cannot because my computer needs me to install some update rollup 2 which doesnt install and i cant install sp3 either... i've been contacting microsoft but they cant sort it.. maybe my pc is just reaching its old age and cannot cope with so many new things going on.
but from what you have said i cant see why it shouldnt work with your current system.
Maybe you are looking for
-
Using Radio Buttons in widget to store Data
I am building my 2nd widget and I am curious to know if anyone has used radio buttons within the edit mode to change/modify/set variables before. I don't want a radio button widget. I want a complex menu widget that will hide/show selected items with
-
MuVo V200 - Need advice on how to play recorded files using Windows Media Pla
Hi I bought a V200. Transferred the recorded audios to my hard disk but can't get windows media player to play it. Error message of: codecs needed. It was recorded as a WAV file. Please advise. Thanks.
-
Converting Word 2007 Styles to PDF
I just upgraded to word 2007. I don't have the PDF Maker for word installed (where you see the Acrobat option on the toolbar in word), and not sure it will install with 2007. So the first question is: Does it? Second question. If you can install PDF
-
Does WET200 support WPA-Enterprise/TKIP?
I could not connect a WET200 (newly bought) to our WPA-enterprise/TKIP wireless network. Can anyone tell me what was wrong? Does WET200 support WPA-enterprise? Please help! Thanks a lot.
-
I bought Adobe Photoshop CS6 over a year ago. I never install it in any computer. I am trying to install it now but it will not recongnize the redemption code